dpaa2_eth: support 1588 one-step timestamping
Yangbo Lu
maintainerv2 cover dpaa2_eth: support 1588 one-step timestamping
This patch-set is to add MC APIs of 1588 one-step timestamping, and support one-step timestamping for PTP Sync packet on DPAA2.
Before egress, one-step timestamping enablement needs,
- Enabling timestamp and FAS (Frame Annotation Status) in dpni buffer layout.
- Write timestamp to frame annotation and set PTP bit in FAS to mark as one-step timestamping event.
- Enabling one-step timestamping by dpni_set_single_step_cfg() API, with offset provided to insert correction time on frame. The offset must respect all MAC headers, VLAN tags and other protocol headers accordingly. The correction field update can consider delays up to one second. So PTP frame needs to be filtered and parsed, and written timestamp into Sync frame originTimestamp field.
The operation of API dpni_set_single_step_cfg() has to be done when no one-step timestamping frames are in flight. So we have to make sure the last one-step timestamping frame has already been transmitted on hardware before starting to send the current one. The resolution is,
- Utilize skb->cb[0] to mark timestamping request per packet. If it is one-step timestamping PTP sync packet, queue to skb queue. If not, transmit immediately.
- Schedule a work to transmit skbs in skb queue.
- mutex lock is used to ensure the last one-step timestamping packet has already been transmitted on hardware through TX confirmation queue before transmitting current packet.
Change for v2:
- Removed unused variable priv in dpaa2_eth_xdp_create_fd().
Yangbo Lu (5):
dpaa2-eth: add APIs of 1588 single step timestamping
dpaa2-eth: define a global ptp_qoriq structure pointer
dpaa2-eth: invoke dpaa2_eth_enable_tx_tstamp() once in code
dpaa2-eth: utilize skb->cb[0] for hardware timestamping
dpaa2-eth: support PTP Sync packet one-step timestamping
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 247 ++++++++++++++++++--- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 43 +++- .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 4 +- drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c | 3 +- drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.h | 4 + drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h | 21 ++ drivers/net/ethernet/freescale/dpaa2/dpni.c | 73 ++++++ drivers/net/ethernet/freescale/dpaa2/dpni.h | 31 +++ 8 files changed, 389 insertions(+), 37 deletions(-)
Signature · 1 line
2.7.4
Yangbo Lu
maintainerPATCH v2 1/5 dpaa2-eth: add APIs of 1588 single step timestamping
This patch is to add APIs of 1588 single step timestamping.
- dpni_set_single_step_cfg
- dpni_get_single_step_cfg
---
Changes for v2:
- None.
--- drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h | 21 +++++++ drivers/net/ethernet/freescale/dpaa2/dpni.c | 73 +++++++++++++++++++++++++ drivers/net/ethernet/freescale/dpaa2/dpni.h | 31 +++++++++++ 3 files changed, 125 insertions(+)
drivers/net/ethernet/freescale/dpaa2/dpni-cmd.h +21 -0
@@ -1,6 +1,7 @@/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ /* Copyright 2013-2016 Freescale Semiconductor Inc. * Copyright 2016 NXP +* Copyright 2020 NXP */ #ifndef _FSL_DPNI_CMD_H#define _FSL_DPNI_CMD_H
@@ -90,6 +91,9 @@#define DPNI_CMDID_SET_RX_HASH_DIST DPNI_CMD(0x274)#define DPNI_CMDID_GET_LINK_CFG DPNI_CMD(0x278) +#define DPNI_CMDID_SET_SINGLE_STEP_CFG DPNI_CMD(0x279) +#define DPNI_CMDID_GET_SINGLE_STEP_CFG DPNI_CMD(0x27a) +/* Macros for accessing command fields smaller than 1byte */ #define DPNI_MASK (field) \ GENMASK(DPNI_##field##_SHIFT + DPNI_##field##_SIZE - 1, \
@@ -639,4 +643,21 @@ struct dpni_cmd_set_tx_shaping { u8 coupled; }; +#define DPNI_PTP_ENABLE_SHIFT 0 +#define DPNI_PTP_ENABLE_SIZE 1 +#define DPNI_PTP_CH_UPDATE_SHIFT 1 +#define DPNI_PTP_CH_UPDATE_SIZE 1 + +struct dpni_cmd_single_step_cfg { +__le16 flags; +__le16 offset; +__le32 peer_delay; +}; + +struct dpni_rsp_single_step_cfg { +__le16 flags; +__le16 offset; +__le32 peer_delay; +}; +#endif /* _FSL_DPNI_CMD_H */
drivers/net/ethernet/freescale/dpaa2/dpni.c +73 -0
82 lines not on this page · raw message
drivers/net/ethernet/freescale/dpaa2/dpni.h +31 -0
@@ -1,6 +1,7 @@/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ /* Copyright 2013-2016 Freescale Semiconductor Inc. * Copyright 2016 NXP +* Copyright 2020 NXP */ #ifndef __FSL_DPNI_H#define __FSL_DPNI_H
@@ -1079,4 +1080,34 @@ int dpni_set_tx_shaping(struct fsl_mc_io *mc_io,const struct dpni_tx_shaping_cfg *tx_er_shaper, int coupled); +/** +* struct dpni_single_step_cfg - configure single step PTP (IEEE 1588) +* @en: enable single step PTP. When enabled the PTPv1 functionality +* will not work. If the field is zero, offset and ch_update +* parameters will be ignored +* @offset: start offset from the beginning of the frame where +* timestamp field is found. The offset must respect all MAC +* headers, VLAN tags and other protocol headers +* @ch_update: when set UDP checksum will be updated inside packet +* @peer_delay: For peer-to-peer transparent clocks add this value to the +* correction field in addition to the transient time update. +* The value expresses nanoseconds. +*/ +struct dpni_single_step_cfg { +u8 en; +u8 ch_update; +u16 offset; +u32 peer_delay; +}; + +int dpni_set_single_step_cfg (struct fsl_mc_io *mc_io, +u32 cmd_flags, +u16 token, +struct dpni_single_step_cfg *ptp_cfg); + +int dpni_get_single_step_cfg (struct fsl_mc_io *mc_io, +u32 cmd_flags, +u16 token, +struct dpni_single_step_cfg *ptp_cfg); +#endif /* __FSL_DPNI_H */
Signature · 1 line
2.7.4
Yangbo Lu
maintainerPATCH v2 2/5 dpaa2-eth: define a global ptp_qoriq structure pointer
In reply to Yangbo LuDefine a global ptp_qoriq structure pointer, and export to use. The ptp clock operations will be used in dpaa2-eth driver. For example, supporting one step timestamping needs to write current time to hardware frame annotation before sending and then hardware inserts the delay time on frame during sending. So in driver, at least clock gettime operation will be needed to make sure right time is written to hardware frame annotation for one step timestamping.
---
Changes for v2:
- None.
--- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ++++ drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c | 3 ++- drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.h | 4 ++++ 3 files changed, 10 insertions(+), 1 deletion(-)
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +4 -0
@@ -15,6 +15,7 @@#include <linux/fsl/mc.h> #include <linux/bpf.h> #include <linux/bpf_trace.h> +#include <linux/fsl/ptp_qoriq.h> #include <net/pkt_cls.h> #include <net/sock.h>
@@ -30,6 +31,9 @@ MODULE_LICENSE("Dual BSD/GPL");MODULE_AUTHOR ("Freescale Semiconductor, Inc" );MODULE_DESCRIPTION ("Freescale DPAA2 Ethernet Driver" ); +struct ptp_qoriq *dpaa2_ptp; +EXPORT_SYMBOL (dpaa2_ptp); +static void *dpaa2_iova_to_virt (struct iommu_domain *domain,dma_addr_t iova_addr) {
drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.c +2 -1
@@ -2,6 +2,7 @@/* * Copyright 2013-2016 Freescale Semiconductor Inc. * Copyright 2016-2018 NXP +* Copyright 2020 NXP */ #include <linux/module.h>
@@ -9,7 +10,6 @@#include <linux/of_address.h> #include <linux/msi.h> #include <linux/fsl/mc.h> -#include <linux/fsl/ptp_qoriq.h> #include "dpaa2-ptp.h"
@@ -201,6 +201,7 @@ static int dpaa2_ptp_probe(struct fsl_mc_device *mc_dev) goto err_free_threaded_irq; dpaa2_phc_index = ptp_qoriq->phc_index; + dpaa2_ptp = ptp_qoriq;dev_set_drvdata (dev, ptp_qoriq);return 0 ;
drivers/net/ethernet/freescale/dpaa2/dpaa2-ptp.h +4 -0
@@ -1,14 +1,18 @@/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright 2018 NXP +* Copyright 2020 NXP */ #ifndef __RTC_H#define __RTC_H +#include <linux/fsl/ptp_qoriq.h> +#include "dprtc.h" #include "dprtc-cmd.h" extern int dpaa2_phc_index; +extern struct ptp_qoriq *dpaa2_ptp;#endif
Signature · 1 line
2.7.4
Yangbo Lu
maintainerPATCH v2 3/5 dpaa2-eth: invoke dpaa2_eth_enable_tx_tstamp() once in code
In reply to Yangbo LuInvoke dpaa2_eth_enable_tx_tstamp() once in code after building FD, rather than calling it in dpaa2_eth_build_single_fd(), dpaa2_eth_build_sg_fd_single_buf(), and dpaa2_eth_build_sg_fd().
---
Changes for v2:
- None.
--- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 31 ++++++++++++------------ 1 file changed, 16 insertions(+), 15 deletions(-)
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +16 -15
@@ -589,7 +589,8 @@ static void dpaa2_eth_enable_tx_tstamp(struct dpaa2_fd *fd, void *buf_start)/* Create a frame descriptor based on a fragmented skb */ static int dpaa2_eth_build_sg_fd (struct dpaa2_eth_priv *priv,struct sk_buff *skb, -struct dpaa2_fd *fd) +struct dpaa2_fd *fd, +void **swa_addr) {struct device *dev = priv->net_dev->dev.parent;void *sgt_buf =NULL ;
@@ -658,6 +659,7 @@ static int dpaa2_eth_build_sg_fd(struct dpaa2_eth_priv *priv,* skb backpointer in the software annotation area. We'll need * all of them on Tx Conf. */ + *swa_addr = (void *)sgt_buf; swa = (struct dpaa2_eth_swa *)sgt_buf; swa->type =DPAA2_ETH_SWA_SG ; swa->sg.skb = skb;
@@ -677,9 +679,6 @@ static int dpaa2_eth_build_sg_fd(struct dpaa2_eth_priv *priv,dpaa2_fd_set_len (fd, skb->len);dpaa2_fd_set_ctrl (fd,FD_CTRL_PTA ); -if (priv->tx_tstamp &&skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) -dpaa2_eth_enable_tx_tstamp (fd, sgt_buf); -return 0 ; dma_map_single_failed:
@@ -699,7 +698,8 @@ static int dpaa2_eth_build_sg_fd(struct dpaa2_eth_priv *priv,*/ static int dpaa2_eth_build_sg_fd_single_buf (struct dpaa2_eth_priv *priv,struct sk_buff *skb, -struct dpaa2_fd *fd) +struct dpaa2_fd *fd, +void **swa_addr) {struct device *dev = priv->net_dev->dev.parent;struct dpaa2_eth_sgt_cache *sgt_cache;
@@ -737,6 +737,7 @@ static int dpaa2_eth_build_sg_fd_single_buf(struct dpaa2_eth_priv *priv,dpaa2_sg_set_final (sgt, true);/* Store the skb backpointer in the SGT buffer */ + *swa_addr = (void *)sgt_buf; swa = (struct dpaa2_eth_swa *)sgt_buf; swa->type =DPAA2_ETH_SWA_SINGLE ; swa->single.skb = skb;
@@ -755,9 +756,6 @@ static int dpaa2_eth_build_sg_fd_single_buf(struct dpaa2_eth_priv *priv,dpaa2_fd_set_len (fd, skb->len);dpaa2_fd_set_ctrl (fd,FD_CTRL_PTA ); -if (priv->tx_tstamp &&skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) -dpaa2_eth_enable_tx_tstamp (fd, sgt_buf); -return 0 ; sgt_map_failed:
@@ -774,7 +772,8 @@ static int dpaa2_eth_build_sg_fd_single_buf(struct dpaa2_eth_priv *priv,/* Create a frame descriptor based on a linear skb */ static int dpaa2_eth_build_single_fd (struct dpaa2_eth_priv *priv,struct sk_buff *skb, -struct dpaa2_fd *fd) +struct dpaa2_fd *fd, +void **swa_addr) {struct device *dev = priv->net_dev->dev.parent;u8 *buffer_start, *aligned_start;
@@ -795,6 +794,7 @@ static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv,* (in the private data area) such that we can release it * on Tx confirm */ + *swa_addr = (void *)buffer_start; swa = (struct dpaa2_eth_swa *)buffer_start; swa->type =DPAA2_ETH_SWA_SINGLE ; swa->single.skb = skb;
@@ -811,9 +811,6 @@ static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv,dpaa2_fd_set_format (fd, dpaa2_fd_single);dpaa2_fd_set_ctrl (fd,FD_CTRL_PTA ); -if (priv->tx_tstamp &&skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) -dpaa2_eth_enable_tx_tstamp (fd, buffer_start); -return 0 ; }
@@ -939,6 +936,7 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)u32 fd_len;u8 prio =0 ;int err, i; +void *swa; percpu_stats =this_cpu_ptr (priv->percpu_stats); percpu_extras =this_cpu_ptr (priv->percpu_extras);
@@ -959,17 +957,17 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)memset (&fd,0 ,sizeof (fd));if (skb_is_nonlinear (skb)) { - err =dpaa2_eth_build_sg_fd (priv, skb, &fd); + err =dpaa2_eth_build_sg_fd (priv, skb, &fd, &swa); percpu_extras->tx_sg_frames++; percpu_extras->tx_sg_bytes += skb->len; }else if (skb_headroom (skb) < needed_headroom) { - err =dpaa2_eth_build_sg_fd_single_buf (priv, skb, &fd); + err =dpaa2_eth_build_sg_fd_single_buf (priv, skb, &fd, &swa); percpu_extras->tx_sg_frames++; percpu_extras->tx_sg_bytes += skb->len; percpu_extras->tx_converted_sg_frames++; percpu_extras->tx_converted_sg_bytes += skb->len; }else { - err =dpaa2_eth_build_single_fd (priv, skb, &fd); + err =dpaa2_eth_build_single_fd (priv, skb, &fd, &swa); }if (unlikely (err)) {
@@ -977,6 +975,9 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev) goto err_build_fd; } +if (priv->tx_tstamp &&skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) +dpaa2_eth_enable_tx_tstamp (&fd, swa); +/* Tracing point */ trace_dpaa2_tx_fd (net_dev, &fd);
Signature · 1 line
2.7.4
Yangbo Lu
maintainerPATCH v2 4/5 dpaa2-eth: utilize skb->cb[0] for hardware timestamping
In reply to Yangbo LuThis patch is a preparation for next hardware one-step timestamping support. For DPAA2, the one step timestamping configuration on hardware registers has to be done when there is no one-step timestamping packet in flight. So we will have to use workqueue and skb queue for such packets transmitting, to make sure waiting the last packet has already been sent on hardware, and starting to transmit the current one.
So the tx timestamping flag in private data may not reflect the actual request for the one-step timestamping packets of skb queue. This also affects skb headroom allocation. Let's use skb->cb[0] to mark the timestamping request for each skb.
---
Change for v2:
- Removed unused variable priv in dpaa2_eth_xdp_create_fd().
--- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 26 +++++++++++++++--------- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 13 ++++++------ 2 files changed, 23 insertions(+), 16 deletions(-)
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +16 -10
@@ -11,7 +11,6 @@#include <linux/msi.h> #include <linux/kthread.h> #include <linux/iommu.h> -#include <linux/net_tstamp.h> #include <linux/fsl/mc.h> #include <linux/bpf.h> #include <linux/bpf_trace.h>
@@ -780,7 +779,7 @@ static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv,struct dpaa2_eth_swa *swa;dma_addr_t addr; - buffer_start = skb->data -dpaa2_eth_needed_headroom (priv, skb); + buffer_start = skb->data -dpaa2_eth_needed_headroom (skb);/* If there's enough room to align the FD address, do it. * It will help hardware optimize accesses.
@@ -894,7 +893,7 @@ static void dpaa2_eth_free_tx_fd(const struct dpaa2_eth_priv *priv, }/* Get the timestamp value */ -if (priv->tx_tstamp &&skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) { +if (skb->cb[0 ] ==TX_TSTAMP ) {struct skb_shared_hwtstamps shhwtstamps;__le64 *ts =dpaa2_get_ts (buffer_start, true);u64 ns;
@@ -938,10 +937,17 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)int err, i;void *swa; +/* Utilize skb->cb[0] for timestamping request per skb */ + skb->cb[0 ] =0 ; + +if (priv->tx_tstamp_type ==HWTSTAMP_TX_ON && +skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) + skb->cb[0 ] =TX_TSTAMP ; + percpu_stats =this_cpu_ptr (priv->percpu_stats); percpu_extras =this_cpu_ptr (priv->percpu_extras); - needed_headroom =dpaa2_eth_needed_headroom (priv, skb); + needed_headroom =dpaa2_eth_needed_headroom (skb);/* We'll be holding a back-reference to the skb until Tx Confirmation; * we don't want that overwritten by a concurrent Tx with a cloned skb.
@@ -975,7 +981,7 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev) goto err_build_fd; } -if (priv->tx_tstamp &&skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) +if (skb->cb[0 ] ==TX_TSTAMP )dpaa2_eth_enable_tx_tstamp (&fd, swa);/* Tracing point */
@@ -1899,10 +1905,8 @@ static int dpaa2_eth_ts_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)switch (config.tx_type) {case HWTSTAMP_TX_OFF : - priv->tx_tstamp = false; -break ;case HWTSTAMP_TX_ON : - priv->tx_tstamp = true; + priv->tx_tstamp_type = config.tx_type;break ;default :return -ERANGE ;
@@ -2097,7 +2101,6 @@ static int dpaa2_eth_xdp_create_fd(struct net_device *net_dev,struct xdp_frame *xdpf, struct dpaa2_fd *fd) { - struct dpaa2_eth_priv *priv = netdev_priv(net_dev); struct device *dev = net_dev->dev.parent;unsigned int needed_headroom;struct dpaa2_eth_swa *swa;
@@ -2107,7 +2110,7 @@ static int dpaa2_eth_xdp_create_fd(struct net_device *net_dev,/* We require a minimum headroom to be able to transmit the frame. * Otherwise return an error and let the original net_device handle it */ - needed_headroom =dpaa2_eth_needed_headroom (priv,NULL ); + needed_headroom =dpaa2_eth_needed_headroom (NULL );if (xdpf->headroom < needed_headroom)return -EINVAL ;
@@ -3963,6 +3966,9 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) priv->iommu_domain =iommu_get_domain_for_dev (dev); + priv->tx_tstamp_type =HWTSTAMP_TX_OFF ; + priv->rx_tstamp = false; +/* Obtain a MC portal */ err =fsl_mc_portal_allocate (dpni_dev,FSL_MC_IO_ATOMIC_CONTEXT_PORTAL , &priv->mc_io);
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +7 -6
@@ -10,6 +10,7 @@#include <linux/netdevice.h> #include <linux/if_vlan.h> #include <linux/fsl/mc.h> +#include <linux/net_tstamp.h> #include <soc/fsl/dpaa2-io.h> #include <soc/fsl/dpaa2-fd.h>
@@ -433,8 +434,8 @@ struct dpaa2_eth_priv {u16 bpid;struct iommu_domain *iommu_domain; -bool tx_tstamp;/* Tx timestamping enabled */ -bool rx_tstamp;/* Rx timestamping enabled */ +enum hwtstamp_tx_types tx_tstamp_type;/* Tx timestamping type */ +bool rx_tstamp;/* Rx timestamping enabled */ u16 tx_qdid;struct fsl_mc_io *mc_io;
@@ -475,6 +476,8 @@ struct dpaa2_eth_priv {struct dpaa2_mac *mac; }; +#define TX_TSTAMP 0x1 +#define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \ | RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \ | RXH_L4_B_2_3)
@@ -560,9 +563,7 @@ static inline bool dpaa2_eth_rx_pause_enabled(u64 link_options)return !!(link_options &DPNI_LINK_OPT_PAUSE ); } -static inline -unsigned int dpaa2_eth_needed_headroom (struct dpaa2_eth_priv *priv, -struct sk_buff *skb) +static inline unsigned int dpaa2_eth_needed_headroom (struct sk_buff *skb) {unsigned int headroom =DPAA2_ETH_SWA_SIZE ;
@@ -579,7 +580,7 @@ unsigned int dpaa2_eth_needed_headroom(struct dpaa2_eth_priv *priv,return 0 ;/* If we have Tx timestamping, need 128B hardware annotation */ -if (priv->tx_tstamp &&skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) +if (skb->cb[0 ] ==TX_TSTAMP ) headroom +=DPAA2_ETH_TX_HWA_SIZE ;return headroom;
Signature · 1 line
2.7.4
Yangbo Lu
maintainerPATCH v2 5/5 dpaa2-eth: support PTP Sync packet one-step timestamping
In reply to Yangbo LuThis patch is to add PTP sync packet one-step timestamping support. Before egress, one-step timestamping enablement needs,
- Enabling timestamp and FAS (Frame Annotation Status) in dpni buffer layout.
- Write timestamp to frame annotation and set PTP bit in FAS to mark as one-step timestamping event.
- Enabling one-step timestamping by dpni_set_single_step_cfg() API, with offset provided to insert correction time on frame. The offset must respect all MAC headers, VLAN tags and other protocol headers accordingly. The correction field update can consider delays up to one second. So PTP frame needs to be filtered and parsed, and written timestamp into Sync frame originTimestamp field.
The operation of API dpni_set_single_step_cfg() has to be done when no one-step timestamping frames are in flight. So we have to make sure the last one-step timestamping frame has already been transmitted on hardware before starting to send the current one. The resolution is,
- Utilize skb->cb[0] to mark timestamping request per packet. If it is one-step timestamping PTP sync packet, queue to skb queue. If not, transmit immediately.
- Schedule a work to transmit skbs in skb queue.
- mutex lock is used to ensure the last one-step timestamping packet has already been transmitted on hardware through TX confirmation queue before transmitting current packet.
---
Changes for v2:
- None.
--- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 206 +++++++++++++++++++-- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 32 +++- .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 4 +- 3 files changed, 226 insertions(+), 16 deletions(-)
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +192 -14
@@ -15,6 +15,7 @@#include <linux/bpf.h> #include <linux/bpf_trace.h> #include <linux/fsl/ptp_qoriq.h> +#include <linux/ptp_classify.h> #include <net/pkt_cls.h> #include <net/sock.h>
@@ -563,11 +564,72 @@ static int dpaa2_eth_consume_frames(struct dpaa2_eth_channel *ch,return cleaned; } +static int dpaa2_eth_ptp_parse (struct sk_buff *skb,u8 *msg_type,u8 *two_step, +u8 *udp,u16 *correction_offset, +u16 *origin_timestamp_offset) +{ +unsigned int ptp_class; +u16 offset =0 ; +u8 *data; + + data =skb_mac_header (skb); + ptp_class =ptp_classify_raw (skb); + +switch (ptp_class &PTP_CLASS_VMASK ) { +case PTP_CLASS_V1 : +case PTP_CLASS_V2 : +break ; +default : +return -ERANGE ; + } + +if (ptp_class &PTP_CLASS_VLAN ) + offset +=VLAN_HLEN ; + +switch (ptp_class &PTP_CLASS_PMASK ) { +case PTP_CLASS_IPV4 : + offset +=ETH_HLEN +IPV4_HLEN (data + offset) +UDP_HLEN ; + *udp =1 ; +break ; +case PTP_CLASS_IPV6 : + offset +=ETH_HLEN +IP6_HLEN +UDP_HLEN ; + *udp =1 ; +break ; +case PTP_CLASS_L2 : + offset +=ETH_HLEN ; + *udp =0 ; +break ; +default : +return -ERANGE ; + } + +/* PTP header is 34 bytes. */ +if (skb->len < offset +34 ) +return -EINVAL ; + + *msg_type = data[offset] &0x0f ; + *two_step = data[offset +6 ] &0x2 ; + *correction_offset = offset +8 ; + *origin_timestamp_offset = offset +34 ; +return 0 ; +} +/* Configure the egress frame annotation for timestamp update */ -static void dpaa2_eth_enable_tx_tstamp (struct dpaa2_fd *fd,void *buf_start) +static void dpaa2_eth_enable_tx_tstamp (struct dpaa2_eth_priv *priv, +struct dpaa2_fd *fd, +void *buf_start, +struct sk_buff *skb) { +struct ptp_tstamp origin_timestamp; +struct dpni_single_step_cfg cfg; +u8 msg_type, two_step, udp;struct dpaa2_faead *faead; +struct dpaa2_fas *fas; +struct timespec64 ts; +u16 offset1, offset2;u32 ctrl, frc; +__le64 *ns; +u8 *data;/* Mark the egress frame annotation area as valid */ frc =dpaa2_fd_get_frc (fd);
@@ -583,6 +645,58 @@ static void dpaa2_eth_enable_tx_tstamp(struct dpaa2_fd *fd, void *buf_start) ctrl =DPAA2_FAEAD_A2V |DPAA2_FAEAD_UPDV |DPAA2_FAEAD_UPD ; faead =dpaa2_get_faead (buf_start, true); faead->ctrl =cpu_to_le32 (ctrl); + +if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +if (dpaa2_eth_ptp_parse (skb, &msg_type, &two_step, &udp, + &offset1, &offset2)) { +netdev_err (priv->net_dev, +"bad packet for one-step timestamping\n" ); +return ; + } + +if (msg_type !=0 || two_step) { +netdev_err (priv->net_dev, +"bad packet for one-step timestamping\n" ); +return ; + } + +/* Mark the frame annotation status as valid */ + frc =dpaa2_fd_get_frc (fd); +dpaa2_fd_set_frc (fd, frc |DPAA2_FD_FRC_FASV ); + +/* Mark the PTP flag for one step timestamping */ + fas =dpaa2_get_fas (buf_start, true); + fas->status =cpu_to_le32 (DPAA2_FAS_PTP ); + +/* Write current time to FA timestamp field */ +if (!dpaa2_ptp) { +netdev_err (priv->net_dev, +"ptp driver may not loaded for one-step timestamping\n" ); +return ; + } + dpaa2_ptp->caps.gettime64 (&dpaa2_ptp->caps, &ts); + ns =dpaa2_get_ts (buf_start, true); + *ns =cpu_to_le64 (timespec64_to_ns (&ts) / +DPAA2_PTP_CLK_PERIOD_NS ); + +/* Update current time to PTP message originTimestamp field */ +ns_to_ptp_tstamp (&origin_timestamp,le64_to_cpup (ns)); + data =skb_mac_header (skb); + *(__be16 *)(data + offset2) =htons (origin_timestamp.sec_msb); + *(__be32 *)(data + offset2 +2 ) = +htonl (origin_timestamp.sec_lsb); + *(__be32 *)(data + offset2 +6 ) =htonl (origin_timestamp.nsec); + + cfg.en =1 ; + cfg.ch_update = udp; + cfg.offset = offset1; + cfg.peer_delay =0 ; + +if (dpni_set_single_step_cfg (priv->mc_io,0 , priv->mc_token, + &cfg)) +netdev_err (priv->net_dev, +"dpni_set_single_step_cfg failed\n" ); + } }/* Create a frame descriptor based on a fragmented skb */
@@ -820,7 +934,7 @@ static int dpaa2_eth_build_single_fd(struct dpaa2_eth_priv *priv,* This can be called either from dpaa2_eth_tx_conf() or on the error path of * dpaa2_eth_tx(). */ -static void dpaa2_eth_free_tx_fd (const struct dpaa2_eth_priv *priv, +static void dpaa2_eth_free_tx_fd (struct dpaa2_eth_priv *priv,struct dpaa2_eth_fq *fq,const struct dpaa2_fd *fd,bool in_napi) {
@@ -903,6 +1017,8 @@ static void dpaa2_eth_free_tx_fd(const struct dpaa2_eth_priv *priv, ns =DPAA2_PTP_CLK_PERIOD_NS *le64_to_cpup (ts); shhwtstamps.hwtstamp =ns_to_ktime (ns);skb_tstamp_tx (skb, &shhwtstamps); + }else if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +mutex_unlock (&priv->onestep_tstamp_lock); }/* Free SGT buffer allocated on tx */
@@ -922,7 +1038,8 @@ static void dpaa2_eth_free_tx_fd(const struct dpaa2_eth_priv *priv,napi_consume_skb (skb, in_napi); } -static netdev_tx_t dpaa2_eth_tx (struct sk_buff *skb,struct net_device *net_dev) +static netdev_tx_t __dpaa2_eth_tx (struct sk_buff *skb, +struct net_device *net_dev) {struct dpaa2_eth_priv *priv =netdev_priv (net_dev);struct dpaa2_fd fd;
@@ -937,13 +1054,6 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)int err, i;void *swa; -/* Utilize skb->cb[0] for timestamping request per skb */ - skb->cb[0 ] =0 ; - -if (priv->tx_tstamp_type ==HWTSTAMP_TX_ON && -skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) - skb->cb[0 ] =TX_TSTAMP ; - percpu_stats =this_cpu_ptr (priv->percpu_stats); percpu_extras =this_cpu_ptr (priv->percpu_extras);
@@ -981,8 +1091,8 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev) goto err_build_fd; } -if (skb->cb[0 ] ==TX_TSTAMP ) -dpaa2_eth_enable_tx_tstamp (&fd, swa); +if (skb->cb[0 ]) +dpaa2_eth_enable_tx_tstamp (priv, &fd, swa, skb);/* Tracing point */ trace_dpaa2_tx_fd (net_dev, &fd);
@@ -1037,6 +1147,58 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)return NETDEV_TX_OK ; } +static void dpaa2_eth_tx_onestep_tstamp (struct work_struct *work) +{ + struct dpaa2_eth_priv *priv = container_of(work, struct dpaa2_eth_priv, + tx_onestep_tstamp); +struct sk_buff *skb; + +while (true) { + skb =skb_dequeue (&priv->tx_skbs); +if (!skb) +return ; + +mutex_lock (&priv->onestep_tstamp_lock); +__dpaa2_eth_tx (skb, priv->net_dev); + } +} + +static netdev_tx_t dpaa2_eth_tx (struct sk_buff *skb,struct net_device *net_dev) +{ +struct dpaa2_eth_priv *priv =netdev_priv (net_dev); +u8 msg_type, two_step, udp; +u16 offset1, offset2; + +/* Utilize skb->cb[0] for timestamping request per skb */ + skb->cb[0 ] =0 ; + +if (skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) { +if (priv->tx_tstamp_type ==HWTSTAMP_TX_ON ) + skb->cb[0 ] =TX_TSTAMP ; +else if (priv->tx_tstamp_type ==HWTSTAMP_TX_ONESTEP_SYNC ) + skb->cb[0 ] =TX_TSTAMP_ONESTEP_SYNC ; + } + +/* TX for one-step timestamping PTP Sync packet */ +if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +if (!dpaa2_eth_ptp_parse (skb, &msg_type, &two_step, &udp, + &offset1, &offset2)) +if (msg_type ==0 && two_step ==0 ) { +skb_queue_tail (&priv->tx_skbs, skb); +queue_work (priv->dpaa2_ptp_wq, + &priv->tx_onestep_tstamp); +return NETDEV_TX_OK ; + } +/* Use two-step timestamping if not one-step timestamping +* PTP Sync packet +*/ + skb->cb[0 ] =TX_TSTAMP ; + } + +/* TX for other packets */ +return __dpaa2_eth_tx (skb, net_dev); +} +/* Tx confirmation frame processing routine */ static void dpaa2_eth_tx_conf(struct dpaa2_eth_priv *priv, struct dpaa2_eth_channel *ch __always_unused,
@@ -1906,6 +2068,7 @@ static int dpaa2_eth_ts_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)switch (config.tx_type) {case HWTSTAMP_TX_OFF :case HWTSTAMP_TX_ON : +case HWTSTAMP_TX_ONESTEP_SYNC : priv->tx_tstamp_type = config.tx_type;break ;default :
@@ -2731,8 +2894,10 @@ static int dpaa2_eth_set_buffer_layout(struct dpaa2_eth_priv *priv)/* tx buffer */ buf_layout.private_data_size =DPAA2_ETH_SWA_SIZE ; buf_layout.pass_timestamp = true; + buf_layout.pass_frame_status = true; buf_layout.options =DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE | -DPNI_BUF_LAYOUT_OPT_TIMESTAMP ; +DPNI_BUF_LAYOUT_OPT_TIMESTAMP | +DPNI_BUF_LAYOUT_OPT_FRAME_STATUS ; err =dpni_set_buffer_layout (priv->mc_io,0 , priv->mc_token,DPNI_QUEUE_TX , &buf_layout);if (err) {
@@ -2741,7 +2906,8 @@ static int dpaa2_eth_set_buffer_layout(struct dpaa2_eth_priv *priv) }/* tx-confirm buffer */ - buf_layout.options =DPNI_BUF_LAYOUT_OPT_TIMESTAMP ; + buf_layout.options =DPNI_BUF_LAYOUT_OPT_TIMESTAMP | +DPNI_BUF_LAYOUT_OPT_FRAME_STATUS ; err =dpni_set_buffer_layout (priv->mc_io,0 , priv->mc_token,DPNI_QUEUE_TX_CONFIRM , &buf_layout);if (err) {
@@ -3969,6 +4135,16 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) priv->tx_tstamp_type =HWTSTAMP_TX_OFF ; priv->rx_tstamp = false; + priv->dpaa2_ptp_wq =alloc_workqueue ("dpaa2_ptp_wq" ,0 ,0 ); +if (!priv->dpaa2_ptp_wq) { + err = -ENOMEM ; + goto err_wq_alloc; + } + +INIT_WORK (&priv->tx_onestep_tstamp, dpaa2_eth_tx_onestep_tstamp); + +skb_queue_head_init (&priv->tx_skbs); +/* Obtain a MC portal */ err =fsl_mc_portal_allocate (dpni_dev,FSL_MC_IO_ATOMIC_CONTEXT_PORTAL , &priv->mc_io);
@@ -4107,6 +4283,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) err_dpni_setup:fsl_mc_portal_free (priv->mc_io); err_portal_alloc: +destroy_workqueue (priv->dpaa2_ptp_wq); +err_wq_alloc:dev_set_drvdata (dev,NULL );free_netdev (net_dev);
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +31 -1
@@ -195,6 +195,24 @@ struct dpaa2_faead {#define DPAA2_FAEAD_EBDDV 0x00002000#define DPAA2_FAEAD_UPD 0x00000010 +struct ptp_tstamp { +u16 sec_msb; +u32 sec_lsb; +u32 nsec; +}; + +static inline void ns_to_ptp_tstamp (struct ptp_tstamp *tstamp,u64 ns) +{ +u64 sec, nsec; + + sec = ns /1000000000ULL ; + nsec = ns %1000000000ULL ; + + tstamp->sec_lsb = sec &0xFFFFFFFF ; + tstamp->sec_msb = (sec >>32 ) &0xFFFF ; + tstamp->nsec = nsec; +} +/* Accessors for the hardware annotation fields that we use */ static inline void *dpaa2_get_hwa (void *buf_addr,bool swa) {
@@ -474,9 +492,21 @@ struct dpaa2_eth_priv {#endif struct dpaa2_mac *mac; +struct workqueue_struct *dpaa2_ptp_wq; +struct work_struct tx_onestep_tstamp; +struct sk_buff_head tx_skbs; +/* The one-step timestamping configuration on hardware +* registers could only be done when no one-step +* timestamping frames are in flight. So we use a mutex +* lock here to make sure the lock is released by last +* one-step timestamping packet through TX confirmation +* queue before transmit current packet. +*/ +struct mutex onestep_tstamp_lock; };#define TX_TSTAMP 0x1 +#define TX_TSTAMP_ONESTEP_SYNC 0x2#define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN | RXH_L3_PROTO \ | RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \
@@ -580,7 +610,7 @@ static inline unsigned int dpaa2_eth_needed_headroom(struct sk_buff *skb)return 0 ;/* If we have Tx timestamping, need 128B hardware annotation */ -if (skb->cb[0 ] ==TX_TSTAMP ) +if (skb->cb[0 ]) headroom +=DPAA2_ETH_TX_HWA_SIZE ;return headroom;
drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c +3 -1
@@ -1,6 +1,7 @@// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* Copyright 2014-2016 Freescale Semiconductor Inc. * Copyright 2016 NXP +* Copyright 2020 NXP */ #include <linux/net_tstamp.h>
@@ -770,7 +771,8 @@ static int dpaa2_eth_get_ts_info(struct net_device *dev, info->phc_index = dpaa2_phc_index; info->tx_types = (1 <<HWTSTAMP_TX_OFF ) | - (1 <<HWTSTAMP_TX_ON ); + (1 <<HWTSTAMP_TX_ON ) | + (1 <<HWTSTAMP_TX_ONESTEP_SYNC ); info->rx_filters = (1 <<HWTSTAMP_FILTER_NONE ) | (1 <<HWTSTAMP_FILTER_ALL );
Signature · 1 line
2.7.4
Ioana Ciornei
maintainerRE: [v2, 5/5] dpaa2-eth: support PTP Sync packet one-step timestamping
Quoted 103 lines
Subject: [v2, 5/5] dpaa2-eth: support PTP Sync packet one-step timestamping
This patch is to add PTP sync packet one-step timestamping support. Before egress, one-step timestamping enablement needs,
- Enabling timestamp and FAS (Frame Annotation Status) in dpni buffer layout.
- Write timestamp to frame annotation and set PTP bit in FAS to mark as one-step timestamping event.
- Enabling one-step timestamping by
dpni_set_single_step_cfg()API, with offset provided to insert correction time on frame. The offset must respect all MAC headers, VLAN tags and other protocol headers accordingly. The correction field update can consider delays up to one second. So PTP frame needs to be filtered and parsed, and written timestamp into Sync frame originTimestamp field.The operation of API
dpni_set_single_step_cfg()has to be done when no one- step timestamping frames are in flight. So we have to make sure the last one- step timestamping frame has already been transmitted on hardware before starting to send the current one. The resolution is,- Utilize skb->cb[0] to mark timestamping request per packet. If it is one-step timestamping PTP sync packet, queue to skb queue. If not, transmit immediately.
- Schedule a work to transmit skbs in skb queue.
- mutex lock is used to ensure the last one-step timestamping packet has already been transmitted on hardware through TX confirmation queue before transmitting current packet.
Signed-off-by Yangbo Lu <[email protected]>---
Changes for v2:
- None.--- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 206 +++++++++++++++++++-- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 32 +++- .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 4 +- 3 files changed, 226 insertions(+), 16 deletions(-)drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +40
-0@@ -15,6 +15,7 @@#include <linux/bpf.h> #include <linux/bpf_trace.h> #include <linux/fsl/ptp_qoriq.h> +#include <linux/ptp_classify.h> #include <net/pkt_cls.h> #include <net/sock.h> @@ -563,11 +564,72 @@ static int dpaa2_eth_consume_frames(structdpaa2_eth_channel *ch, return cleaned; } +static int dpaa2_eth_ptp_parse (struct sk_buff *skb,u8 *msg_type,u8 *two_step, +u8 *udp,u16 *correction_offset, +u16 *origin_timestamp_offset) { +unsigned int ptp_class; +u16 offset =0 ; +u8 *data; + + data =skb_mac_header (skb); + ptp_class =ptp_classify_raw (skb); + +switch (ptp_class &PTP_CLASS_VMASK ) { +case PTP_CLASS_V1 : +case PTP_CLASS_V2 : +break ; +default : +return -ERANGE ; + } + +if (ptp_class &PTP_CLASS_VLAN ) + offset +=VLAN_HLEN ; + +switch (ptp_class &PTP_CLASS_PMASK ) { +case PTP_CLASS_IPV4 : + offset +=ETH_HLEN +IPV4_HLEN (data + offset) +UDP_HLEN ; + *udp =1 ; +break ; +case PTP_CLASS_IPV6 : + offset +=ETH_HLEN +IP6_HLEN +UDP_HLEN ; + *udp =1 ; +break ; +case PTP_CLASS_L2 : + offset +=ETH_HLEN ; + *udp =0 ; +break ; +default : +return -ERANGE ; + } + +/* PTP header is 34 bytes. */
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c static int dpaa2_eth_consume_frames(struct · line 617
Quoted 10 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +10
-0+if (skb->len < offset +34 ) +return -EINVAL ; + + *msg_type = data[offset] &0x0f ; + *two_step = data[offset +6 ] &0x2 ; + *correction_offset = offset +8 ; + *origin_timestamp_offset = offset +34 ; +return 0 ; +} +
Hi Yangbo,
Kurt Kanzenbach just added a generic function, ptp_parse_header, that directly returns a struct ptp_header *.
https://patchwork.ozlabs.org/project/netdev/list/?series=196189&state=*
Maybe use this instead of open-coding it?
Thanks,
Ioana
Quoted 350 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +12
-0/* Configure the egress frame annotation for timestamp update */ -static voiddpaa2_eth_enable_tx_tstamp (struct dpaa2_fd *fd,void *buf_start) +static void dpaa2_eth_enable_tx_tstamp(struct dpaa2_eth_priv *priv, + struct dpaa2_fd *fd, + void *buf_start, + struct sk_buff *skb) { +struct ptp_tstamp origin_timestamp; +struct dpni_single_step_cfg cfg; +u8 msg_type, two_step, udp;struct dpaa2_faead *faead; +struct dpaa2_fas *fas; +struct timespec64 ts; +u16 offset1, offset2;u32 ctrl, frc; +__le64 *ns; +u8 *data;drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +38
-0/* Mark the egress frame annotation area as valid */ frc =dpaa2_fd_get_frc (fd);@@ -583,6 +645,58 @@ static void dpaa2_eth_enable_tx_tstamp(struct dpaa2_fd *fd, void *buf_start) ctrl =DPAA2_FAEAD_A2V |DPAA2_FAEAD_UPDV |DPAA2_FAEAD_UPD ; faead =dpaa2_get_faead (buf_start, true); faead->ctrl =cpu_to_le32 (ctrl); + +if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +if (dpaa2_eth_ptp_parse (skb, &msg_type, &two_step, &udp, + &offset1, &offset2)) { +netdev_err (priv->net_dev, +"bad packet for one-step timestamping\n" ); +return ; + } + +if (msg_type !=0 || two_step) { +netdev_err (priv->net_dev, +"bad packet for one-step timestamping\n" ); +return ; + } + +/* Mark the frame annotation status as valid */ + frc =dpaa2_fd_get_frc (fd); +dpaa2_fd_set_frc (fd, frc |DPAA2_FD_FRC_FASV ); + +/* Mark the PTP flag for one step timestamping */ + fas =dpaa2_get_fas (buf_start, true); + fas->status =cpu_to_le32 (DPAA2_FAS_PTP ); + +/* Write current time to FA timestamp field */ +if (!dpaa2_ptp) { +netdev_err (priv->net_dev, +"ptp driver may not loaded for one-step timestamping\n"); +return ; + } + dpaa2_ptp->caps.gettime64 (&dpaa2_ptp->caps, &ts); + ns =dpaa2_get_ts (buf_start, true); + *ns =cpu_to_le64 (timespec64_to_ns (&ts) / +DPAA2_PTP_CLK_PERIOD_NS ); + +/* Update current time to PTP message originTimestamp field */ +ns_to_ptp_tstamp (&origin_timestamp,le64_to_cpup (ns)); + data =skb_mac_header (skb); + *(__be16 *)(data + offset2) =
htons(origin_timestamp.sec_msb);drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +14
-0+ *(__be32 *)(data + offset2 +2 ) = +htonl (origin_timestamp.sec_lsb); + *(__be32 *)(data + offset2 +6 ) =htonl (origin_timestamp.nsec); + + cfg.en =1 ; + cfg.ch_update = udp; + cfg.offset = offset1; + cfg.peer_delay =0 ; + +if (dpni_set_single_step_cfg (priv->mc_io,0 , priv->mc_token, + &cfg)) +netdev_err (priv->net_dev, +"dpni_set_single_step_cfg failed\n" ); + } } /* Create a frame descriptor based on a fragmented skb */ @@ -820,7 +934,7@@ static int dpaa2_eth_build_single_fd(struct
dpaa2_eth_priv*priv,
* This can be called either fromdpaa2_eth_tx_conf()or on the error path of
*dpaa2_eth_tx().
*/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +1
-2-static void dpaa2_eth_free_tx_fd (const struct dpaa2_eth_priv *priv, +static void dpaa2_eth_free_tx_fd (struct dpaa2_eth_priv *priv,struct dpaa2_eth_fq *fq, const struct dpaa2_fd *fd, bool in_napi) { @@ -903,6 +1017,8 @@ static void dpaa2_eth_free_tx_fd(const struct
dpaa2_eth_priv*priv,drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +4
-1ns =DPAA2_PTP_CLK_PERIOD_NS *le64_to_cpup (ts); shhwtstamps.hwtstamp =ns_to_ktime (ns);skb_tstamp_tx (skb, &shhwtstamps); + }else if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +mutex_unlock (&priv->onestep_tstamp_lock); }/* Free SGT buffer allocated on tx */ @@ -922,7 +1038,8 @@ static void dpaa2_eth_free_tx_fd(const structdpaa2_eth_priv *priv,napi_consume_skb (skb ,in_napi ); } -static netdev_tx_t dpaa2_eth_tx (struct sk_buff *skb,struct net_device *net_dev) +static netdev_tx_t __dpaa2_eth_tx (struct sk_buff *skb, +struct net_device *net_dev) {drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +2
-9struct dpaa2_eth_priv *priv =netdev_priv (net_dev);struct dpaa2_fd fd;@@ -937,13 +1054,6 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)int err, i;void *swa; -/* Utilize skb->cb[0] for timestamping request per skb */ - skb->cb[0 ] =0 ; - -if (priv->tx_tstamp_type ==HWTSTAMP_TX_ON && -skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) - skb->cb[0 ] =TX_TSTAMP ; - percpu_stats =this_cpu_ptr (priv->percpu_stats); percpu_extras =this_cpu_ptr (priv->percpu_extras);@@ -981,8 +1091,8 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev) goto err_build_fd; } -if (skb->cb[0 ] ==TX_TSTAMP ) -dpaa2_eth_enable_tx_tstamp (&fd, swa); +if (skb->cb[0 ]) +dpaa2_eth_enable_tx_tstamp (priv, &fd, swa, skb);/* Tracing point */ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +51
-0trace_dpaa2_tx_fd (net_dev, &fd);@@ -1037,6 +1147,58 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff *skb, struct net_device *net_dev)return NETDEV_TX_OK ; } +static void dpaa2_eth_tx_onestep_tstamp (struct work_struct *work) { + struct dpaa2_eth_priv *priv = container_of(work, struct dpaa2_eth_priv, + tx_onestep_tstamp); +struct sk_buff *skb; + +while (true) { + skb =skb_dequeue (&priv->tx_skbs); +if (!skb) +return ; + +mutex_lock (&priv->onestep_tstamp_lock); +__dpaa2_eth_tx (skb, priv->net_dev); + } +} + +static netdev_tx_t dpaa2_eth_tx (struct sk_buff *skb,struct net_device +*net_dev) { +struct dpaa2_eth_priv *priv =netdev_priv (net_dev); +u8 msg_type, two_step, udp; +u16 offset1, offset2; + +/* Utilize skb->cb[0] for timestamping request per skb */ + skb->cb[0 ] =0 ; + +if (skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) { +if (priv->tx_tstamp_type ==HWTSTAMP_TX_ON ) + skb->cb[0 ] =TX_TSTAMP ; +else if (priv->tx_tstamp_type ==HWTSTAMP_TX_ONESTEP_SYNC ) + skb->cb[0 ] =TX_TSTAMP_ONESTEP_SYNC ; + } + +/* TX for one-step timestamping PTP Sync packet */ +if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +if (!dpaa2_eth_ptp_parse (skb, &msg_type, &two_step, &udp, + &offset1, &offset2)) +if (msg_type ==0 && two_step ==0 ) { +skb_queue_tail (&priv->tx_skbs, skb); +queue_work (priv->dpaa2_ptp_wq, + &priv->tx_onestep_tstamp); +return NETDEV_TX_OK ; + } +/* Use two-step timestamping if not one-step timestamping +* PTP Sync packet +*/ + skb->cb[0 ] =TX_TSTAMP ; + } + +/* TX for other packets */ +return __dpaa2_eth_tx (skb, net_dev); +} + /* Tx confirmation frame processing routine */ static voiddpaa2_eth_tx_conf(struct
dpaa2_eth_priv*priv,drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +1
-0struct dpaa2_eth_channel *ch __always_unused,@@ -1906,6 +2068,7 @@ static int dpaa2_eth_ts_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) switch (config.tx_type) {case HWTSTAMP_TX_OFF :case HWTSTAMP_TX_ON : +case HWTSTAMP_TX_ONESTEP_SYNC : priv->tx_tstamp_type = config.tx_type;break ;drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +3
-1default :@@ -2731,8 +2894,10 @@ static int dpaa2_eth_set_buffer_layout(struct dpaa2_eth_priv *priv)/* tx buffer */ buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE; buf_layout.pass_timestamp = true; + buf_layout.pass_frame_status = true; buf_layout.options =DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE | -DPNI_BUF_LAYOUT_OPT_TIMESTAMP ; +DPNI_BUF_LAYOUT_OPT_TIMESTAMP | +DPNI_BUF_LAYOUT_OPT_FRAME_STATUS ; err =dpni_set_buffer_layout (priv->mc_io,0 , priv->mc_token,DPNI_QUEUE_TX , &buf_layout);drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +2
-1if (err) {@@ -2741,7 +2906,8 @@ static int dpaa2_eth_set_buffer_layout(struct dpaa2_eth_priv *priv) }/* tx-confirm buffer */ - buf_layout.options =DPNI_BUF_LAYOUT_OPT_TIMESTAMP ; + buf_layout.options =DPNI_BUF_LAYOUT_OPT_TIMESTAMP | +DPNI_BUF_LAYOUT_OPT_FRAME_STATUS ; err =dpni_set_buffer_layout (priv->mc_io,0 , priv->mc_token,DPNI_QUEUE_TX_CONFIRM , &buf_layout);drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +10
-0if (err) {@@ -3969,6 +4135,16 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) priv->tx_tstamp_type =HWTSTAMP_TX_OFF ; priv->rx_tstamp = false; + priv->dpaa2_ptp_wq =alloc_workqueue ("dpaa2_ptp_wq" ,0 ,0 ); +if (!priv->dpaa2_ptp_wq) { + err = -ENOMEM ; + goto err_wq_alloc; + } + +INIT_WORK (&priv->tx_onestep_tstamp, dpaa2_eth_tx_onestep_tstamp); + +skb_queue_head_init (&priv->tx_skbs); +/* Obtain a MC portal */ err = fsl_mc_portal_allocate(dpni_dev,
FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +2
-0&priv->mc_io);@@ -4107,6 +4283,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) err_dpni_setup:fsl_mc_portal_free (priv->mc_io); err_portal_alloc: +destroy_workqueue (priv->dpaa2_ptp_wq); +err_wq_alloc:dev_set_drvdata (dev,NULL );free_netdev (net_dev);drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +18
-0@@ -195,6 +195,24 @@ struct dpaa2_faead {#define DPAA2_FAEAD_EBDDV 0x00002000#define DPAA2_FAEAD_UPD 0x00000010 +struct ptp_tstamp { +u16 sec_msb; +u32 sec_lsb; +u32 nsec; +}; + +static inline void ns_to_ptp_tstamp (struct ptp_tstamp *tstamp,u64 ns) +{ +u64 sec, nsec; + + sec = ns /1000000000ULL ; + nsec = ns %1000000000ULL ; + + tstamp->sec_lsb = sec &0xFFFFFFFF ; + tstamp->sec_msb = (sec >>32 ) &0xFFFF ; + tstamp->nsec = nsec; +} +/* Accessors for the hardware annotation fields that we use */ static inline void *dpaa2_get_hwa(void *buf_addr, bool swa) { @@ -474,9 +492,21 @@ struct
dpaa2_eth_priv{ #endifdrivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +12
-0struct dpaa2_mac *mac; +struct workqueue_struct *dpaa2_ptp_wq; +struct work_struct tx_onestep_tstamp; +struct sk_buff_head tx_skbs; +/* The one-step timestamping configuration on hardware +* registers could only be done when no one-step +* timestamping frames are in flight. So we use a mutex +* lock here to make sure the lock is released by last +* one-step timestamping packet through TX confirmation +* queue before transmit current packet. +*/ +struct mutex onestep_tstamp_lock; };#define TX_TSTAMP 0x1 +#define TX_TSTAMP_ONESTEP_SYNC 0x2#define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN |
RXH_L3_PROTO\drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +1
-1| RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \@@ -580,7 +610,7 @@ static inline unsigned int dpaa2_eth_needed_headroom(struct sk_buff *skb) return 0;/* If we have Tx timestamping, need 128B hardware annotation */ -if (skb->cb[0 ] ==TX_TSTAMP ) +if (skb->cb[0 ]) headroom +=DPAA2_ETH_TX_HWA_SIZE ;drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +0
-0return headroom;drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c +3
-1@@ -1,6 +1,7 @@// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* Copyright 2014-2016 Freescale Semiconductor Inc. * Copyright 2016 NXP +* Copyright 2020 NXP */ #include <linux/net_tstamp.h> @@ -770,7 +771,8 @@ static int dpaa2_eth_get_ts_info(struct net_device *dev, info->phc_index = dpaa2_phc_index; info->tx_types = (1 <<HWTSTAMP_TX_OFF ) | - (1 <<HWTSTAMP_TX_ON ); + (1 <<HWTSTAMP_TX_ON ) | + (1 <<HWTSTAMP_TX_ONESTEP_SYNC ); info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |(1 <<
HWTSTAMP_FILTER_ALL);
--
2.7.4
Y.b. Lu
maintainerRE: [v2, 5/5] dpaa2-eth: support PTP Sync packet one-step timestamping
Hi Ioana,
Quoted 128 lines
-----Original Message-----
From: Ioana Ciornei <[email protected]>
Sent: Thursday, September 10, 2020 6:30 PM
To: Y.b. Lu <[email protected]>; [email protected]
Cc: Y.b. Lu <[email protected]>; David S . Miller <[email protected]>; Jakub Kicinski <[email protected]>; Richard Cochran <[email protected]>
Subject: RE: [v2, 5/5] dpaa2-eth: support PTP Sync packet one-step timestampingQuoted 1 line
Subject: [v2, 5/5] dpaa2-eth: support PTP Sync packet one-step
timestamping
Quoted 23 lines
This patch is to add PTP sync packet one-step timestamping support. Before egress, one-step timestamping enablement needs,
- Enabling timestamp and FAS (Frame Annotation Status) in dpni buffer layout.
- Write timestamp to frame annotation and set PTP bit in FAS to mark as one-step timestamping event.
- Enabling one-step timestamping by
dpni_set_single_step_cfg()API, with offset provided to insert correction time on frame. The offset must respect all MAC headers, VLAN tags and other protocol headers accordingly. The correction field update can consider delays up to one second. So PTP frame needs to be filtered and parsed, and written timestamp into Sync frame originTimestamp field.The operation of API
dpni_set_single_step_cfg()has to be done when no one- step timestamping frames are in flight. So we have to make sure the last one- step timestamping frame has already been transmitted on hardware before starting to send the current one. The resolution is,Quoted 8 lines
- Utilize skb->cb[0] to mark timestamping request per packet. If it is one-step timestamping PTP sync packet, queue to skb queue. If not, transmit immediately.
- Schedule a work to transmit skbs in skb queue.
- mutex lock is used to ensure the last one-step timestamping packet has already been transmitted on hardware through TX confirmation
queue
Quoted 71 lines
before transmitting current packet.
Signed-off-by Yangbo Lu <[email protected]>---
Changes for v2:
- None.--- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 206 +++++++++++++++++++-- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 32 +++- .../net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 4 +- 3 files changed, 226 insertions(+), 16 deletions(-)drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +40
-0@@ -15,6 +15,7 @@#include <linux/bpf.h> #include <linux/bpf_trace.h> #include <linux/fsl/ptp_qoriq.h> +#include <linux/ptp_classify.h> #include <net/pkt_cls.h> #include <net/sock.h> @@ -563,11 +564,72 @@ static int dpaa2_eth_consume_frames(structdpaa2_eth_channel *ch, return cleaned; } +static int dpaa2_eth_ptp_parse (struct sk_buff *skb,u8 *msg_type,u8 *two_step, +u8 *udp,u16 *correction_offset, +u16 *origin_timestamp_offset) { +unsigned int ptp_class; +u16 offset =0 ; +u8 *data; + + data =skb_mac_header (skb); + ptp_class =ptp_classify_raw (skb); + +switch (ptp_class &PTP_CLASS_VMASK ) { +case PTP_CLASS_V1 : +case PTP_CLASS_V2 : +break ; +default : +return -ERANGE ; + } + +if (ptp_class &PTP_CLASS_VLAN ) + offset +=VLAN_HLEN ; + +switch (ptp_class &PTP_CLASS_PMASK ) { +case PTP_CLASS_IPV4 : + offset +=ETH_HLEN +IPV4_HLEN (data + offset) +UDP_HLEN ; + *udp =1 ; +break ; +case PTP_CLASS_IPV6 : + offset +=ETH_HLEN +IP6_HLEN +UDP_HLEN ; + *udp =1 ; +break ; +case PTP_CLASS_L2 : + offset +=ETH_HLEN ; + *udp =0 ; +break ; +default : +return -ERANGE ; + } + +/* PTP header is 34 bytes. */ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c static int dpaa2_eth_consume_frames(struct · line 617
Quoted 10 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +10
-0+if (skb->len < offset +34 ) +return -EINVAL ; + + *msg_type = data[offset] &0x0f ; + *two_step = data[offset +6 ] &0x2 ; + *correction_offset = offset +8 ; + *origin_timestamp_offset = offset +34 ; +return 0 ; +} +Hi Yangbo,
Quoted 5 lines
Kurt Kanzenbach just added a generic function,
ptp_parse_header, that directly returns a structptp_header*.
https://patchwork.ozlabs.org/project/netdev/list/?series=196189&state=*Maybe use this instead of open-coding it?
Thanks for suggestion. I will use it in next version.
Quoted 363 lines
Thanks,
Ioanadrivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c static int dpaa2_eth_consume_frames(struct · line 618
Quoted 1 line
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +0
-0/* Configure the egress frame annotation for timestamp update */ -staticvoid
Quoted 72 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +12
-0dpaa2_eth_enable_tx_tstamp(struct dpaa2_fd *fd, void *buf_start) +static void dpaa2_eth_enable_tx_tstamp(struct dpaa2_eth_priv *priv, + struct dpaa2_fd *fd, + void *buf_start, + struct sk_buff *skb) { + struct ptp_tstamp origin_timestamp; +struct dpni_single_step_cfg cfg; +u8 msg_type, two_step, udp;struct dpaa2_faead *faead; +struct dpaa2_fas *fas; +struct timespec64 ts; +u16 offset1, offset2;u32 ctrl, frc; +__le64 *ns; +u8 *data;drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +38
-0/* Mark the egress frame annotation area as valid */ frc =dpaa2_fd_get_frc (fd);@@ -583,6 +645,58 @@ static void dpaa2_eth_enable_tx_tstamp(struct dpaa2_fd *fd, void *buf_start) ctrl =DPAA2_FAEAD_A2V |DPAA2_FAEAD_UPDV |DPAA2_FAEAD_UPD ; faead =dpaa2_get_faead (buf_start, true); faead->ctrl =cpu_to_le32 (ctrl); + +if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +if (dpaa2_eth_ptp_parse (skb, &msg_type, &two_step, &udp, + &offset1, &offset2)) { +netdev_err (priv->net_dev, +"bad packet for one-step timestamping\n" ); +return ; + } + +if (msg_type !=0 || two_step) { +netdev_err (priv->net_dev, +"bad packet for one-step timestamping\n" ); +return ; + } + +/* Mark the frame annotation status as valid */ + frc =dpaa2_fd_get_frc (fd); +dpaa2_fd_set_frc (fd, frc |DPAA2_FD_FRC_FASV ); + +/* Mark the PTP flag for one step timestamping */ + fas =dpaa2_get_fas (buf_start, true); + fas->status =cpu_to_le32 (DPAA2_FAS_PTP ); + +/* Write current time to FA timestamp field */ +if (!dpaa2_ptp) { +netdev_err (priv->net_dev, +"ptp driver may not loaded for one-step timestamping\n"); +return ; + } + dpaa2_ptp->caps.gettime64 (&dpaa2_ptp->caps, &ts); + ns =dpaa2_get_ts (buf_start, true); + *ns =cpu_to_le64 (timespec64_to_ns (&ts) / +DPAA2_PTP_CLK_PERIOD_NS ); + +/* Update current time to PTP message originTimestamp field */ +ns_to_ptp_tstamp (&origin_timestamp,le64_to_cpup (ns)); + data =skb_mac_header (skb); + *(__be16 *)(data + offset2) =
htons(origin_timestamp.sec_msb);drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +7
-0+ *(__be32 *)(data + offset2 +2 ) = +htonl (origin_timestamp.sec_lsb); + *(__be32 *)(data + offset2 +6 ) =htonl (origin_timestamp.nsec); + + cfg.en =1 ; + cfg.ch_update = udp; + cfg.offset = offset1;drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c static void dpaa2_eth_enable_tx_tstamp(struct dpaa2_fd *fd, void *buf_start)
Quoted 10 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +7
-0+ cfg.peer_delay =0 ; + +if (dpni_set_single_step_cfg (priv->mc_io,0 , priv->mc_token, + &cfg)) +netdev_err (priv->net_dev, +"dpni_set_single_step_cfg failed\n" ); + } } /* Create a frame descriptor based on a fragmented skb */ @@ -820,7+934,7
Quoted 2 lines
@@ static int dpaa2_eth_build_single_fd(struct
dpaa2_eth_priv*priv,
* This can be called either fromdpaa2_eth_tx_conf()or on the error pathof
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c static netdev_tx_t dpaa2_eth_tx(struct sk_buff
Quoted 29 lines
*
dpaa2_eth_tx().
*/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +1
-2-static void dpaa2_eth_free_tx_fd (const struct dpaa2_eth_priv *priv, +static void dpaa2_eth_free_tx_fd (struct dpaa2_eth_priv *priv,struct dpaa2_eth_fq *fq, const struct dpaa2_fd *fd, bool in_napi) { @@ -903,6 +1017,8 @@ static void dpaa2_eth_free_tx_fd(const struct
dpaa2_eth_priv*priv,drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +4
-1ns =DPAA2_PTP_CLK_PERIOD_NS *le64_to_cpup (ts); shhwtstamps.hwtstamp =ns_to_ktime (ns);skb_tstamp_tx (skb, &shhwtstamps); + }else if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +mutex_unlock (&priv->onestep_tstamp_lock); }/* Free SGT buffer allocated on tx */ @@ -922,7 +1038,8 @@ static void dpaa2_eth_free_tx_fd(const structdpaa2_eth_priv *priv,napi_consume_skb (skb ,in_napi ); } -static netdev_tx_t dpaa2_eth_tx (struct sk_buff *skb,struct net_device *net_dev) +static netdev_tx_t __dpaa2_eth_tx (struct sk_buff *skb, +struct net_device *net_dev) {drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +0
-0struct dpaa2_eth_priv *priv =netdev_priv (net_dev);struct dpaa2_fd fd;@@ -937,13 +1054,6 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff*skb,
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c static netdev_tx_t dpaa2_eth_tx(struct sk_buff
Quoted 15 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +0
-7struct net_device *net_dev)int err, i;void *swa; -/* Utilize skb->cb[0] for timestamping request per skb */ - skb->cb[0 ] =0 ; - -if (priv->tx_tstamp_type ==HWTSTAMP_TX_ON && -skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) - skb->cb[0 ] =TX_TSTAMP ; - percpu_stats =this_cpu_ptr (priv->percpu_stats); percpu_extras =this_cpu_ptr (priv->percpu_extras);@@ -981,8 +1091,8 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff*skb,
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c static netdev_tx_t dpaa2_eth_tx(struct sk_buff
Quoted 12 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +2
-2struct net_device *net_dev) goto err_build_fd; } -if (skb->cb[0 ] ==TX_TSTAMP ) -dpaa2_eth_enable_tx_tstamp (&fd, swa); +if (skb->cb[0 ]) +dpaa2_eth_enable_tx_tstamp (priv, &fd, swa, skb);/* Tracing point */ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +0
-0trace_dpaa2_tx_fd (net_dev, &fd);@@ -1037,6 +1147,58 @@ static netdev_tx_t dpaa2_eth_tx(struct sk_buff*skb,
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c static int dpaa2_eth_ts_ioctl(struct net_device
Quoted 60 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +51
-0struct net_device *net_dev)return NETDEV_TX_OK ; } +static void dpaa2_eth_tx_onestep_tstamp (struct work_struct *work) { + struct dpaa2_eth_priv *priv = container_of(work, struct dpaa2_eth_priv, + tx_onestep_tstamp); +struct sk_buff *skb; + +while (true) { + skb =skb_dequeue (&priv->tx_skbs); +if (!skb) +return ; + +mutex_lock (&priv->onestep_tstamp_lock); +__dpaa2_eth_tx (skb, priv->net_dev); + } +} + +static netdev_tx_t dpaa2_eth_tx (struct sk_buff *skb,struct net_device +*net_dev) { +struct dpaa2_eth_priv *priv =netdev_priv (net_dev); +u8 msg_type, two_step, udp; +u16 offset1, offset2; + +/* Utilize skb->cb[0] for timestamping request per skb */ + skb->cb[0 ] =0 ; + +if (skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) { +if (priv->tx_tstamp_type ==HWTSTAMP_TX_ON ) + skb->cb[0 ] =TX_TSTAMP ; +else if (priv->tx_tstamp_type ==HWTSTAMP_TX_ONESTEP_SYNC ) + skb->cb[0 ] =TX_TSTAMP_ONESTEP_SYNC ; + } + +/* TX for one-step timestamping PTP Sync packet */ +if (skb->cb[0 ] ==TX_TSTAMP_ONESTEP_SYNC ) { +if (!dpaa2_eth_ptp_parse (skb, &msg_type, &two_step, &udp, + &offset1, &offset2)) +if (msg_type ==0 && two_step ==0 ) { +skb_queue_tail (&priv->tx_skbs, skb); +queue_work (priv->dpaa2_ptp_wq, + &priv->tx_onestep_tstamp); +return NETDEV_TX_OK ; + } +/* Use two-step timestamping if not one-step timestamping +* PTP Sync packet +*/ + skb->cb[0 ] =TX_TSTAMP ; + } + +/* TX for other packets */ +return __dpaa2_eth_tx (skb, net_dev); +} + /* Tx confirmation frame processing routine */ static voiddpaa2_eth_tx_conf(struct
dpaa2_eth_priv*priv,drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +0
-0struct dpaa2_eth_channel *ch __always_unused,@@ -1906,6 +2068,7 @@ static int dpaa2_eth_ts_ioctl(struct net_device*dev,
Quoted 80 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +1
-0struct ifreq *rq, int cmd) switch (config.tx_type) {case HWTSTAMP_TX_OFF :case HWTSTAMP_TX_ON : +case HWTSTAMP_TX_ONESTEP_SYNC : priv->tx_tstamp_type = config.tx_type;break ;drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +3
-1default :@@ -2731,8 +2894,10 @@ static int dpaa2_eth_set_buffer_layout(struct dpaa2_eth_priv *priv)/* tx buffer */ buf_layout.private_data_size = DPAA2_ETH_SWA_SIZE; buf_layout.pass_timestamp = true; + buf_layout.pass_frame_status = true; buf_layout.options =DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE | -DPNI_BUF_LAYOUT_OPT_TIMESTAMP ; +DPNI_BUF_LAYOUT_OPT_TIMESTAMP | +DPNI_BUF_LAYOUT_OPT_FRAME_STATUS ; err =dpni_set_buffer_layout (priv->mc_io,0 , priv->mc_token,DPNI_QUEUE_TX , &buf_layout);drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +2
-1if (err) {@@ -2741,7 +2906,8 @@ static int dpaa2_eth_set_buffer_layout(struct dpaa2_eth_priv *priv) }/* tx-confirm buffer */ - buf_layout.options =DPNI_BUF_LAYOUT_OPT_TIMESTAMP ; + buf_layout.options =DPNI_BUF_LAYOUT_OPT_TIMESTAMP | +DPNI_BUF_LAYOUT_OPT_FRAME_STATUS ; err =dpni_set_buffer_layout (priv->mc_io,0 , priv->mc_token,DPNI_QUEUE_TX_CONFIRM , &buf_layout);drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +10
-0if (err) {@@ -3969,6 +4135,16 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) priv->tx_tstamp_type =HWTSTAMP_TX_OFF ; priv->rx_tstamp = false; + priv->dpaa2_ptp_wq =alloc_workqueue ("dpaa2_ptp_wq" ,0 ,0 ); +if (!priv->dpaa2_ptp_wq) { + err = -ENOMEM ; + goto err_wq_alloc; + } + +INIT_WORK (&priv->tx_onestep_tstamp, dpaa2_eth_tx_onestep_tstamp); + +skb_queue_head_init (&priv->tx_skbs); +/* Obtain a MC portal */ err = fsl_mc_portal_allocate(dpni_dev,
FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +2
-0&priv->mc_io);@@ -4107,6 +4283,8 @@ static int dpaa2_eth_probe(struct fsl_mc_device *dpni_dev) err_dpni_setup:fsl_mc_portal_free (priv->mc_io); err_portal_alloc: +destroy_workqueue (priv->dpaa2_ptp_wq); +err_wq_alloc:dev_set_drvdata (dev,NULL );free_netdev (net_dev);drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +9
-0@@ -195,6 +195,24 @@ struct dpaa2_faead {#define DPAA2_FAEAD_EBDDV 0x00002000#define DPAA2_FAEAD_UPD 0x00000010 +struct ptp_tstamp { +u16 sec_msb; +u32 sec_lsb; +u32 nsec; +}; + +static inline void ns_to_ptp_tstamp (struct ptp_tstamp *tstamp,u64 ns) +{ +u64 sec, nsec;drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h struct dpaa2_faead { · line 216
Quoted 10 lines
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +9
-0+ + sec = ns /1000000000ULL ; + nsec = ns %1000000000ULL ; + + tstamp->sec_lsb = sec &0xFFFFFFFF ; + tstamp->sec_msb = (sec >>32 ) &0xFFFF ; + tstamp->nsec = nsec; +} + /* Accessors for the hardware annotation fields that we use */ staticinline void
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h struct dpaa2_faead { · line 217
Quoted 1 line
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +0
-0*dpaa2_get_hwa(void *buf_addr, bool swa) { @@ -474,9 +492,21 @@struct
Quoted 58 lines
dpaa2_eth_priv{ #endifdrivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +12
-0struct dpaa2_mac *mac; +struct workqueue_struct *dpaa2_ptp_wq; +struct work_struct tx_onestep_tstamp; +struct sk_buff_head tx_skbs; +/* The one-step timestamping configuration on hardware +* registers could only be done when no one-step +* timestamping frames are in flight. So we use a mutex +* lock here to make sure the lock is released by last +* one-step timestamping packet through TX confirmation +* queue before transmit current packet. +*/ +struct mutex onestep_tstamp_lock; };#define TX_TSTAMP 0x1 +#define TX_TSTAMP_ONESTEP_SYNC 0x2#define DPAA2_RXH_SUPPORTED (RXH_L2DA | RXH_VLAN |
RXH_L3_PROTO\drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +1
-1| RXH_IP_SRC | RXH_IP_DST | RXH_L4_B_0_1 \@@ -580,7 +610,7 @@ static inline unsigned int dpaa2_eth_needed_headroom(struct sk_buff *skb) return 0;/* If we have Tx timestamping, need 128B hardware annotation */ -if (skb->cb[0 ] ==TX_TSTAMP ) +if (skb->cb[0 ]) headroom +=DPAA2_ETH_TX_HWA_SIZE ;drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h +0
-0return headroom;drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c +3
-1@@ -1,6 +1,7 @@// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* Copyright 2014-2016 Freescale Semiconductor Inc. * Copyright 2016 NXP +* Copyright 2020 NXP */ #include <linux/net_tstamp.h> @@ -770,7 +771,8 @@ static int dpaa2_eth_get_ts_info(struct net_device *dev, info->phc_index = dpaa2_phc_index; info->tx_types = (1 <<HWTSTAMP_TX_OFF ) | - (1 <<HWTSTAMP_TX_ON ); + (1 <<HWTSTAMP_TX_ON ) | + (1 <<HWTSTAMP_TX_ONESTEP_SYNC ); info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |(1 <<
HWTSTAMP_FILTER_ALL);
--
2.7.4
Jakub Kicinski
maintainerQuoted 2 lines · On Thu, 10 Sep 2020 18:16:50 +0800 Yangbo Lu wrote:
Change for v2:
- Removed unused variable priv indpaa2_eth_xdp_create_fd().
Ah, just saw this. Please fix all the other warnings and errors from v1, too.