Skip to contentSkip to conversation

MSI/MSIX for VFIO platform

DISCUSSION Alex Williamson 3 participants 3 messages Sep 10, 2020 – Sep 14, 2020 1 message not in the archive KVM

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 5 lines · On Thu, 10 Sep 2020 16:15:27 +0530 Vikas Gupta <[email protected]> wrote:

Hi Alex/Cornelia,

We are looking for MSI interrupts for platform devices in user-space applications via event/poll mechanism using VFIO.

Quoted 8 lines

Since there is no support for MSI/MSIX handling in VFIO-platform in kernel, it may not possible to get this feature in user-space.

Is there any other way we can get this feature in user-space OR can you please suggest if any patch or feature is in progress for same in VFIO platform?

Any suggestions would be helpful.

Eric (Cc'd) is the maintainer of vfio-platform.

vfio-platform devices don't have IRQ indexes dedicated to MSI and MSI-X like vfio-pci devices do (technically these are PCI concepts, but I assume we're referring generically to message signaled interrupts), but that's simply due to the lack of standardization in platform devices. Logically these are simply collections of edge triggered interrupts, which the vfio device API supports generically, it's simply a matter that the vfio bus driver exposing a vfio-platform device create an IRQ index exposing these vectors. Thanks,

Alex

#2 lore raw

Hi Vikas,

Quoted 19 lines · Alex Williamson
Quoted 5 lines · On Thu, 10 Sep 2020 16:15:27 +0530 Vikas Gupta <[email protected]> wrote:

Hi Alex/Cornelia,

We are looking for MSI interrupts for platform devices in user-space applications via event/poll mechanism using VFIO.

Quoted 8 lines

Since there is no support for MSI/MSIX handling in VFIO-platform in kernel, it may not possible to get this feature in user-space.

Is there any other way we can get this feature in user-space OR can you please suggest if any patch or feature is in progress for same in VFIO platform?

Any suggestions would be helpful.

Eric (Cc'd) is the maintainer of vfio-platform.

Quoted 8 lines

vfio-platform devices don't have IRQ indexes dedicated to MSI and MSI-X like vfio-pci devices do (technically these are PCI concepts, but I assume we're referring generically to message signaled interrupts), but that's simply due to the lack of standardization in platform devices. Logically these are simply collections of edge triggered interrupts, which the vfio device API supports generically, it's simply a matter that the vfio bus driver exposing a vfio-platform device create an IRQ index exposing these vectors. Thanks,

I have not worked on MSI support and I am not aware of any work happening in this area.

First I would recommend to look at IRQ related uapis exposed by VFIO:
VFIO_DEVICE_GET_IRQ_INFO
VFIO_DEVICE_SET_IRQS

and try to understand if they can be implemented for MSIs in a generic way in the vfio_platform driver using platform-msi helpers.

For instance VFIO_DEVICE_GET_IRQ_INFO would need to return the number of requested vectors. On init I guess we should allocate vectors using platform_msi_domain_alloc_irqs/ devm_request_irq and in the handler trigger the eventfd provided through VFIO_DEVICE_SET_IRQS.

On userspace where you have to trap the MSI setup to call the above functions and setup irqfd injection. This would be device specific as opposed to PCI. That's just rough ideas at the moment.

Thanks

Eric

Quoted 3 lines

Alex

#3 lore raw

Hi Eric/Alex,
Thanks for your valuable suggestions and get back to you if anything is required.

Thanks,
Vikas

Quoted 59 lines · Auger Eric

Hi Vikas,

Quoted 19 lines · Alex Williamson
Quoted 5 lines · On Thu, 10 Sep 2020 16:15:27 +0530 Vikas Gupta <[email protected]> wrote:

Hi Alex/Cornelia,

We are looking for MSI interrupts for platform devices in user-space applications via event/poll mechanism using VFIO.

Quoted 8 lines

Since there is no support for MSI/MSIX handling in VFIO-platform in kernel, it may not possible to get this feature in user-space.

Is there any other way we can get this feature in user-space OR can you please suggest if any patch or feature is in progress for same in VFIO platform?

Any suggestions would be helpful.

Eric (Cc'd) is the maintainer of vfio-platform.

Quoted 8 lines

vfio-platform devices don't have IRQ indexes dedicated to MSI and MSI-X like vfio-pci devices do (technically these are PCI concepts, but I assume we're referring generically to message signaled interrupts), but that's simply due to the lack of standardization in platform devices. Logically these are simply collections of edge triggered interrupts, which the vfio device API supports generically, it's simply a matter that the vfio bus driver exposing a vfio-platform device create an IRQ index exposing these vectors. Thanks,

I have not worked on MSI support and I am not aware of any work happening in this area.

First I would recommend to look at IRQ related uapis exposed by VFIO:
VFIO_DEVICE_GET_IRQ_INFO
VFIO_DEVICE_SET_IRQS

and try to understand if they can be implemented for MSIs in a generic way in the vfio_platform driver using platform-msi helpers.

For instance VFIO_DEVICE_GET_IRQ_INFO would need to return the number of requested vectors. On init I guess we should allocate vectors using platform_msi_domain_alloc_irqs/ devm_request_irq and in the handler trigger the eventfd provided through VFIO_DEVICE_SET_IRQS.

On userspace where you have to trap the MSI setup to call the above functions and setup irqfd injection. This would be device specific as opposed to PCI. That's just rough ideas at the moment.

Thanks

Eric

Quoted 3 lines

Alex