Skip to contentSkip to conversation

ASoC: ti: j721e-evm: Support for j7200 variant

PATCH In review Peter Ujfalusi 2 participants 4 messages Sep 10, 2020 – Sep 14, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v2 cover ASoC: ti: j721e-evm: Support for j7200 variant

Hi,

Changes since v1:
- Suffix the 2359296000 constant with 'u' to silence C90 warning

When j7200 SOM is connected to the CPB, the audio setup is a bit different:
Only 48KHz family have clock path, 44.1KHz is not supported.

Update the binding documentation and add support for the j7200 version of CPB to the driver.

Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: dt-bindings: ti,j721e-cpb-audio: Document support for j7200-cpb
ASoC: ti: j721e-evm: Add support for j7200-cpb audio

 .../bindings/sound/ti,j721e-cpb-audio.yaml    | 92 ++++++++++++++-----
 sound/soc/ti/j721e-evm.c                      | 11 +++
 2 files changed, 81 insertions(+), 22 deletions(-)
Signature · 4 lines
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
#1 lore raw

PATCH v2 1/2 ASoC: dt-bindings: ti,j721e-cpb-audio: Document support for j7200-cpb

j721e or j7200 SOM can be attached to the same Common Processor Board (CPB)

With the j7200 SOM only the 48KHz family parent clock is available and McASP0 is used for the audio.

---
 .../bindings/sound/ti,j721e-cpb-audio.yaml    | 92 ++++++++++++++-----
 1 file changed, 70 insertions(+), 22 deletions(-)
Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml +70 -22
index d52cfbeb2d07..805da4d6a88e 100644
@@ -18,18 +18,25 @@ description: |
   PLL15 (for 44.1KHz). The same PLLs are used for McASP10's AUXCLK clock via
   different HSDIVIDER.
 
-  Clocking setup for 48KHz family:
-  PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
-        |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+  Clocking setup for j721e:
+    48KHz family:
+    PLL4 ---> PLL4_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+          |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
 
-  Clocking setup for 44.1KHz family:
-  PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
-         |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+    44.1KHz family:
+    PLL15 ---> PLL15_HSDIV0 ---> MCASP10_AUXCLK ---> McASP10.auxclk
+           |-> PLL15_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
+
+  Clocking setup for j7200:
+    48KHz family:
+    PLL4 ---> PLL4_HSDIV0 ---> MCASP0_AUXCLK ---> McASP0.auxclk
+          |-> PLL4_HSDIV2 ---> AUDIO_REFCLK2  ---> pcm3168a.SCKI
 
 properties:
   compatible:
-    items:
-      - const: ti,j721e-cpb-audio
+    enum:
+      - ti,j721e-cpb-audio
+      - ti,j7200-cpb-audio
 
   model:
     $ref: /schemas/types.yaml#/definitions/string
@@ -44,22 +51,12 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle
 
   clocks:
-    items:
-      - description: AUXCLK clock for McASP used by CPB audio
-      - description: Parent for CPB_McASP auxclk (for 48KHz)
-      - description: Parent for CPB_McASP auxclk (for 44.1KHz)
-      - description: SCKI clock for the pcm3168a codec on CPB
-      - description: Parent for CPB_SCKI clock (for 48KHz)
-      - description: Parent for CPB_SCKI clock (for 44.1KHz)
+    minItems: 4
+    maxItems: 6
 
   clock-names:
-    items:
-      - const: cpb-mcasp-auxclk
-      - const: cpb-mcasp-auxclk-48000
-      - const: cpb-mcasp-auxclk-44100
-      - const: cpb-codec-scki
-      - const: cpb-codec-scki-48000
-      - const: cpb-codec-scki-44100
+    minItems: 4
+    maxItems: 6
 
 required:
   - compatible
@@ -71,6 +68,57 @@ required:
 
 additionalProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-cpb-audio
+
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          items:
+            - description: AUXCLK clock for McASP used by CPB audio
+            - description: Parent for CPB_McASP auxclk (for 48KHz)
+            - description: Parent for CPB_McASP auxclk (for 44.1KHz)
+            - description: SCKI clock for the pcm3168a codec on CPB
+            - description: Parent for CPB_SCKI clock (for 48KHz)
+            - description: Parent for CPB_SCKI clock (for 44.1KHz)
+
+        clock-names:
+          items:
+            - const: cpb-mcasp-auxclk
+            - const: cpb-mcasp-auxclk-48000
+            - const: cpb-mcasp-auxclk-44100
+            - const: cpb-codec-scki
+            - const: cpb-codec-scki-48000
+            - const: cpb-codec-scki-44100
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j7200-cpb-audio
+
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+          items:
+            - description: AUXCLK clock for McASP used by CPB audio
+            - description: Parent for CPB_McASP auxclk (for 48KHz)
+            - description: SCKI clock for the pcm3168a codec on CPB
+            - description: Parent for CPB_SCKI clock (for 48KHz)
+
+        clock-names:
+          items:
+            - const: cpb-mcasp-auxclk
+            - const: cpb-mcasp-auxclk-48000
+            - const: cpb-codec-scki
+            - const: cpb-codec-scki-48000
+
 examples:
   - |+
     sound {
Signature · 4 lines
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
#2 lore raw

PATCH v2 2/2 ASoC: ti: j721e-evm: Add support for j7200-cpb audio

In reply to Peter Ujfalusi

When j7200 SOM is attached to the CPB we only have parent clock for 48KHz family and the rate of the parent clock is 2359296000Hz.

---
 sound/soc/ti/j721e-evm.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
sound/soc/ti/j721e-evm.c +11 -0
index cb074af47a7d..29b73303f3fc 100644
@@ -525,6 +525,14 @@ static const struct j721e_audio_match_data j721e_cpb_ivi_data = {
 	},
 };
 
+static const struct j721e_audio_match_data j7200_cpb_data = {
+	.board_type = J721E_BOARD_CPB,
+	.num_links = 2, /* CPB pcm3168a */
+	.pll_rates = {
+		[J721E_CLK_PARENT_48000] = 2359296000u, /* PLL4 */
+	},
+};
+
 static const struct of_device_id j721e_audio_of_match[] = {
 	{
 		.compatible = "ti,j721e-cpb-audio",
@@ -532,6 +540,9 @@ static const struct of_device_id j721e_audio_of_match[] = {
 	}, {
 		.compatible = "ti,j721e-cpb-ivi-audio",
 		.data = &j721e_cpb_ivi_data,
+	}, {
+		.compatible = "ti,j7200-cpb-audio",
+		.data = &j7200_cpb_data,
 	},
 	{ },
 };
Signature · 4 lines
Peter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
maintainer
#3 lore raw
In reply to Peter Ujfalusi
Quoted 10 lines · Peter Ujfalusi

Changes since v1:
- Suffix the 2359296000 constant with 'u' to silence C90 warning

When j7200 SOM is connected to the CPB, the audio setup is a bit different:
Only 48KHz family have clock path, 44.1KHz is not supported.

Update the binding documentation and add support for the j7200 version of CPB to the driver.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/2] ASoC: dt-bindings: ti, j721e-cpb-audio: Document support for j7200-cpb

      commit: 18790b1b514a202bae2863a4206b731d95302c85
[2/2] ASoC: ti: j721e-evm: Add support for j7200-cpb audio
      commit: 18c140f4a2de8fa674d52fe522a47133bc124f81

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark