Make check_func_arg type checks table driven
Subsystems (7)
v3 cover Make check_func_arg type checks table driven
Another round of review from Martin, thanks!
Changes in v3:
- Fix BTF_ID_LIST_SINGLE if BTF is disabled (Martin)
- Drop incorrect arg_btf_id in bpf_sk_storage.c (Martin)
- Check for arg_btf_id in check_func_proto (Martin)
- Drop incorrect PTR_TO_BTF_ID from fullsock_types (Martin)
- Introduce btf_seq_file_ids in bpf_trace.c to reduce duplication
Changes in v2:
- Make the series stand alone (Martin)
- Drop incorrect BTF_SET_START fix (Andrii)
- Only support a single BTF ID per argument (Martin)
- Introduce BTF_ID_LIST_SINGLE macro (Andrii)
- Skip check_ctx_reg iff register is NULL
- Change output of check_reg_type slightly, to avoid touching tests
Original cover letter:
Currently, check_func_arg has this pretty gnarly if statement that compares the valid arg_type with the actualy reg_type. Sprinkled in-between are checks for register_is_null, to short circuit these tests if we're dealing with a nullable arg_type. There is also some code for later bounds / access checking hidden away in there.
This series of patches refactors the function into something like this:
if (reg_is_null && arg_type_is_nullable)
skip type checkingdo type checking, including BTF validation
do bounds / access checking
The type checking is now table driven, which makes it easy to extend the acceptable types. Maybe more importantly, using a table makes it easy to provide more helpful verifier output (see the last patch).
Lorenz Bauer (11):
btf: make btf_set_contains take a const pointer
bpf: check scalar or invalid register in check_helper_mem_access
btf: Add BTF_ID_LIST_SINGLE macro
bpf: allow specifying a BTF ID per argument in function protos
bpf: make BTF pointer type checking generic
bpf: make reference tracking generic
bpf: make context access check generic
bpf: set meta->raw_mode for pointers close to use
bpf: check ARG_PTR_TO_SPINLOCK register type in check_func_arg
bpf: hoist type checking for nullable arg types
bpf: use a table to drive helper arg type checks
include/linux/bpf.h | 21 +- include/linux/btf_ids.h | 8 + kernel/bpf/bpf_inode_storage.c | 8 +- kernel/bpf/btf.c | 15 +- kernel/bpf/stackmap.c | 5 +- kernel/bpf/verifier.c | 338 ++++++++++++++++++--------------- kernel/trace/bpf_trace.c | 15 +- net/core/bpf_sk_storage.c | 8 +- net/core/filter.c | 31 +-- net/ipv4/bpf_tcp_ca.c | 19 +- tools/include/linux/btf_ids.h | 8 + 11 files changed, 239 insertions(+), 237 deletions(-)
Signature · 1 line
2.25.1
PATCH v3 1/11 btf: make btf_set_contains take a const pointer
bsearch doesn't modify the contents of the array, so we can take a const pointer.
--- include/linux/bpf.h | 2 +- kernel/bpf/btf.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
include/linux/bpf.h +1 -1
@@ -1900,6 +1900,6 @@ int bpf_arch_text_poke(void *ip, enum bpf_text_poke_type t, void *addr1, void *addr2);struct btf_id_set ; -bool btf_id_set_contains (struct btf_id_set *set,u32 id); +bool btf_id_set_contains (const struct btf_id_set *set,u32 id);#endif /* _LINUX_BPF_H */
kernel/bpf/btf.c +1 -1
@@ -4772,7 +4772,7 @@ static int btf_id_cmp_func(const void *a, const void *b)return *pa - *pb; } -bool btf_id_set_contains (struct btf_id_set *set,u32 id) +bool btf_id_set_contains (const struct btf_id_set *set,u32 id) {return bsearch (&id, set->ids, set->cnt,sizeof (u32), btf_id_cmp_func) !=NULL ; }
Signature · 1 line
2.25.1
PATCH v3 2/11 bpf: check scalar or invalid register in check_helper_mem_access
In reply to Lorenz BauerMove the check for a NULL or zero register to check_helper_mem_access. This makes check_stack_boundary easier to understand.
--- kernel/bpf/verifier.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-)
kernel/bpf/verifier.c +11 -13
@@ -3594,18 +3594,6 @@ static int check_stack_boundary(struct bpf_verifier_env *env, int regno,struct bpf_func_state *state =func (env, reg);int err, min_off, max_off, i, j, slot, spi; -if (reg->type !=PTR_TO_STACK ) { -/* Allow zero-byte read from NULL, regardless of pointer type */ -if (zero_size_allowed && access_size ==0 && -register_is_null (reg)) -return 0 ; - -verbose (env,"R%d type=%s expected=%s\n" , regno, - reg_type_str[reg->type], - reg_type_str[PTR_TO_STACK ]); -return -EACCES ; - } -if (tnum_is_const (reg->var_off)) { min_off = max_off = reg->var_off.value + reg->off; err = __check_stack_boundary(env, regno, min_off, access_size,
@@ -3750,9 +3738,19 @@ static int check_helper_mem_access(struct bpf_verifier_env *env, int regno, access_size, zero_size_allowed,"rdwr" , &env->prog->aux->max_rdwr_access); -default :/* scalar_value|ptr_to_stack or invalid ptr */ +case PTR_TO_STACK :return check_stack_boundary (env, regno, access_size, zero_size_allowed, meta); +default :/* scalar_value or invalid ptr */ +/* Allow zero-byte read from NULL, regardless of pointer type */ +if (zero_size_allowed && access_size ==0 && +register_is_null (reg)) +return 0 ; + +verbose (env,"R%d type=%s expected=%s\n" , regno, + reg_type_str[reg->type], + reg_type_str[PTR_TO_STACK ]); +return -EACCES ; } }
Signature · 1 line
2.25.1
PATCH v3 3/11 btf: Add BTF_ID_LIST_SINGLE macro
In reply to Lorenz BauerAdd a convenience macro that allows defining a BTF ID list with a single item. This lets us cut down on repetitive macros.
--- include/linux/btf_ids.h | 8 ++++++++ tools/include/linux/btf_ids.h | 8 ++++++++ 2 files changed, 16 insertions(+)
include/linux/btf_ids.h +8 -0
@@ -76,6 +76,13 @@ extern u32 name[];#define BTF_ID_LIST_GLOBAL (name) \ __BTF_ID_LIST(name, globl) +/* The BTF_ID_LIST_SINGLE macro defines a BTF_ID_LIST with +* a single entry. +*/ +#define BTF_ID_LIST_SINGLE (name, prefix, typename) \ + BTF_ID_LIST(name) \ + BTF_ID(prefix, typename) +/* * The BTF_ID_UNUSED macro defines 4 zero bytes. * It's used when we want to define 'unused' entry
@@ -140,6 +147,7 @@ extern struct btf_id_set name;#define BTF_ID (prefix, name)#define BTF_ID_UNUSED #define BTF_ID_LIST_GLOBAL (name) u32 name[1]; +#define BTF_ID_LIST_SINGLE (name, prefix, typename) static u32 name[1];#define BTF_SET_START (name) static struct btf_id_set name = { 0 };#define BTF_SET_START_GLOBAL (name) static struct btf_id_set name = { 0 };#define BTF_SET_END (name)
tools/include/linux/btf_ids.h +8 -0
@@ -76,6 +76,13 @@ extern u32 name[];#define BTF_ID_LIST_GLOBAL (name) \ __BTF_ID_LIST(name, globl) +/* The BTF_ID_LIST_SINGLE macro defines a BTF_ID_LIST with +* a single entry. +*/ +#define BTF_ID_LIST_SINGLE (name, prefix, typename) \ + BTF_ID_LIST(name) \ + BTF_ID(prefix, typename) +/* * The BTF_ID_UNUSED macro defines 4 zero bytes. * It's used when we want to define 'unused' entry
@@ -140,6 +147,7 @@ extern struct btf_id_set name;#define BTF_ID (prefix, name)#define BTF_ID_UNUSED #define BTF_ID_LIST_GLOBAL (name) u32 name[1]; +#define BTF_ID_LIST_SINGLE (name, prefix, typename) static u32 name[1];#define BTF_SET_START (name) static struct btf_id_set name = { 0 };#define BTF_SET_START_GLOBAL (name) static struct btf_id_set name = { 0 };#define BTF_SET_END (name)
Signature · 1 line
2.25.1
Re: [PATCH bpf-next v3 03/11] btf: Add BTF_ID_LIST_SINGLE macro
Quoted 2 lines · Lorenz Bauer
Add a convenience macro that allows defining a BTF ID list with a single item. This lets us cut down on repetitive macros.
PATCH v3 4/11 bpf: allow specifying a BTF ID per argument in function protos
In reply to Lorenz BauerFunction prototypes using ARG_PTR_TO_BTF_ID currently use two ways to signal which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of IDs, one for each argument. This array is only accessed up to the highest numbered argument that uses ARG_PTR_TO_BTF_ID and may therefore be less than five arguments long. It usually points at a BTF_ID_LIST. Second, check_btf_id is a function pointer that is called by the verifier if present. It gets the actual BTF ID of the register, and the argument number we're currently checking. It turns out that the only user check_arg_btf_id ignores the argument, and is simply used to check whether the BTF ID has a struct sock_common at it's start.
Replace both of these mechanisms with an explicit BTF ID for each argument in a function proto. Thanks to btf_struct_ids_match this is very flexible:check_arg_btf_id can be replaced by requiring struct sock_common.
--- include/linux/bpf.h | 18 +++++++------- kernel/bpf/bpf_inode_storage.c | 8 +++---- kernel/bpf/btf.c | 13 ---------- kernel/bpf/stackmap.c | 5 ++-- kernel/bpf/verifier.c | 44 +++++++++++++++++----------------- kernel/trace/bpf_trace.c | 15 ++++-------- net/core/bpf_sk_storage.c | 8 ++----- net/core/filter.c | 31 +++++++----------------- net/ipv4/bpf_tcp_ca.c | 19 ++++----------- 9 files changed, 58 insertions(+), 103 deletions(-)
include/linux/bpf.h +10 -8
@@ -326,12 +326,16 @@ struct bpf_func_proto { };enum bpf_arg_type arg_type[5 ]; }; -int *btf_id;/* BTF ids of arguments */ -bool (*check_btf_id)(u32 btf_id,u32 arg);/* if the argument btf_id is -* valid. Often used if more -* than one btf id is permitted -* for this argument. -*/ +union { +struct { +u32 *arg1_btf_id; +u32 *arg2_btf_id; +u32 *arg3_btf_id; +u32 *arg4_btf_id; +u32 *arg5_btf_id; + }; +u32 *arg_btf_id[5 ]; + };int *ret_btf_id;/* return value btf_id */ bool (*allowed)(const struct bpf_prog *prog); };
@@ -1380,8 +1384,6 @@ int btf_struct_access(struct bpf_verifier_log *log, u32 *next_btf_id);bool btf_struct_ids_match (struct bpf_verifier_log *log,int off,u32 id,u32 need_type_id); -int btf_resolve_helper_id (struct bpf_verifier_log *log, -const struct bpf_func_proto *fn,int ); int btf_distill_func_proto(struct bpf_verifier_log *log, struct btf *btf,
kernel/bpf/bpf_inode_storage.c +3 -5
@@ -249,9 +249,7 @@ const struct bpf_map_ops inode_storage_map_ops = { .map_owner_storage_ptr = inode_storage_ptr, }; -BTF_ID_LIST (bpf_inode_storage_btf_ids) -BTF_ID_UNUSED -BTF_ID(struct, inode) +BTF_ID_LIST_SINGLE(bpf_inode_storage_btf_ids, struct, inode)const struct bpf_func_proto bpf_inode_storage_get_proto = { .func = bpf_inode_storage_get,
@@ -259,9 +257,9 @@ const struct bpf_func_proto bpf_inode_storage_get_proto = { .ret_type = RET_PTR_TO_MAP_VALUE_OR_NULL, .arg1_type = ARG_CONST_MAP_PTR, .arg2_type = ARG_PTR_TO_BTF_ID, + .arg2_btf_id = &bpf_inode_storage_btf_ids[0], .arg3_type = ARG_PTR_TO_MAP_VALUE_OR_NULL, .arg4_type = ARG_ANYTHING, - .btf_id = bpf_inode_storage_btf_ids, };const struct bpf_func_proto bpf_inode_storage_delete_proto = {
@@ -270,5 +268,5 @@ const struct bpf_func_proto bpf_inode_storage_delete_proto = { .ret_type = RET_INTEGER, .arg1_type = ARG_CONST_MAP_PTR, .arg2_type = ARG_PTR_TO_BTF_ID, - .btf_id = bpf_inode_storage_btf_ids, + .arg2_btf_id = &bpf_inode_storage_btf_ids[0], };
kernel/bpf/btf.c +0 -13
@@ -4193,19 +4193,6 @@ bool btf_struct_ids_match(struct bpf_verifier_log *log,return true; } -int btf_resolve_helper_id (struct bpf_verifier_log *log, -const struct bpf_func_proto *fn,int arg) -{ -int id; - -if (fn->arg_type[arg] !=ARG_PTR_TO_BTF_ID || !btf_vmlinux) -return -EINVAL ; - id = fn->btf_id[arg]; -if (!id || id > btf_vmlinux->nr_types) -return -EINVAL ; -return id; -} -static int __get_type_size (struct btf *btf,u32 btf_id,const struct btf_type **bad_type) {
kernel/bpf/stackmap.c +2 -3
@@ -665,18 +665,17 @@ BPF_CALL_4(bpf_get_task_stack, struct task_struct *, task, void *, buf,return __bpf_get_stack (regs, task,NULL , buf, size, flags); } -BTF_ID_LIST (bpf_get_task_stack_btf_ids) -BTF_ID(struct, task_struct) +BTF_ID_LIST_SINGLE(bpf_get_task_stack_btf_ids, struct, task_struct)const struct bpf_func_proto bpf_get_task_stack_proto = { .func = bpf_get_task_stack, .gpl_only = false, .ret_type =RET_INTEGER , .arg1_type =ARG_PTR_TO_BTF_ID , + .arg1_btf_id = &bpf_get_task_stack_btf_ids[0 ], .arg2_type =ARG_PTR_TO_UNINIT_MEM , .arg3_type =ARG_CONST_SIZE_OR_ZERO , .arg4_type =ARG_ANYTHING , - .btf_id = bpf_get_task_stack_btf_ids, }; BPF_CALL_4(bpf_get_stack_pe, struct bpf_perf_event_data_kern *, ctx,
kernel/bpf/verifier.c +22 -22
79 lines not on this page · raw message
kernel/trace/bpf_trace.c +5 -10
@@ -743,19 +743,18 @@ BPF_CALL_5(bpf_seq_printf, struct seq_file *, m, char *, fmt, u32, fmt_size,return err; } -BTF_ID_LIST (bpf_seq_printf_btf_ids) -BTF_ID(struct, seq_file) +BTF_ID_LIST_SINGLE(btf_seq_file_ids, struct, seq_file)static const struct bpf_func_proto bpf_seq_printf_proto = { .func = bpf_seq_printf, .gpl_only = true, .ret_type =RET_INTEGER , .arg1_type =ARG_PTR_TO_BTF_ID , + .arg1_btf_id = &btf_seq_file_ids[0 ], .arg2_type =ARG_PTR_TO_MEM , .arg3_type =ARG_CONST_SIZE , .arg4_type =ARG_PTR_TO_MEM_OR_NULL , .arg5_type =ARG_CONST_SIZE_OR_ZERO , - .btf_id = bpf_seq_printf_btf_ids, }; BPF_CALL_3(bpf_seq_write, struct seq_file *, m, const void *, data, u32, len)
@@ -763,17 +762,14 @@ BPF_CALL_3(bpf_seq_write, struct seq_file *, m, const void *, data, u32, len)return seq_write (m, data, len) ? -EOVERFLOW :0 ; } -BTF_ID_LIST (bpf_seq_write_btf_ids) -BTF_ID(struct, seq_file) -static const struct bpf_func_proto bpf_seq_write_proto = { .func = bpf_seq_write, .gpl_only = true, .ret_type =RET_INTEGER , .arg1_type =ARG_PTR_TO_BTF_ID , + .arg1_btf_id = &btf_seq_file_ids[0 ], .arg2_type =ARG_PTR_TO_MEM , .arg3_type =ARG_CONST_SIZE_OR_ZERO , - .btf_id = bpf_seq_write_btf_ids, };static __always_inline int
@@ -1130,17 +1126,16 @@ static bool bpf_d_path_allowed(const struct bpf_prog *prog)return btf_id_set_contains (&btf_allowlist_d_path, prog->aux->attach_btf_id); } -BTF_ID_LIST (bpf_d_path_btf_ids) -BTF_ID(struct, path) +BTF_ID_LIST_SINGLE(bpf_d_path_btf_ids, struct, path)static const struct bpf_func_proto bpf_d_path_proto = { .func = bpf_d_path, .gpl_only = false, .ret_type =RET_INTEGER , .arg1_type =ARG_PTR_TO_BTF_ID , + .arg1_btf_id = &bpf_d_path_btf_ids[0 ], .arg2_type =ARG_PTR_TO_MEM , .arg3_type =ARG_CONST_SIZE_OR_ZERO , - .btf_id = bpf_d_path_btf_ids, .allowed = bpf_d_path_allowed, };
net/core/bpf_sk_storage.c +2 -6
@@ -379,19 +379,15 @@ const struct bpf_func_proto bpf_sk_storage_delete_proto = { .arg2_type = ARG_PTR_TO_SOCKET, }; -BTF_ID_LIST (sk_storage_btf_ids) -BTF_ID_UNUSED -BTF_ID(struct, sock) -const struct bpf_func_proto sk_storage_get_btf_proto = { .func = bpf_sk_storage_get, .gpl_only = false, .ret_type =RET_PTR_TO_MAP_VALUE_OR_NULL , .arg1_type =ARG_CONST_MAP_PTR , .arg2_type =ARG_PTR_TO_BTF_ID , + .arg2_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK ], .arg3_type =ARG_PTR_TO_MAP_VALUE_OR_NULL , .arg4_type =ARG_ANYTHING , - .btf_id = sk_storage_btf_ids, };const struct bpf_func_proto sk_storage_delete_btf_proto = {
@@ -400,7 +396,7 @@ const struct bpf_func_proto sk_storage_delete_btf_proto = { .ret_type = RET_INTEGER, .arg1_type = ARG_CONST_MAP_PTR, .arg2_type = ARG_PTR_TO_BTF_ID, - .btf_id = sk_storage_btf_ids, + .arg2_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK], };struct bpf_sk_storage_diag {
net/core/filter.c +9 -22
@@ -3803,19 +3803,18 @@ static const struct bpf_func_proto bpf_skb_event_output_proto = { .arg5_type = ARG_CONST_SIZE_OR_ZERO, }; -BTF_ID_LIST (bpf_skb_output_btf_ids) -BTF_ID(struct, sk_buff) +BTF_ID_LIST_SINGLE(bpf_skb_output_btf_ids, struct, sk_buff)const struct bpf_func_proto bpf_skb_output_proto = { .func = bpf_skb_event_output, .gpl_only = true, .ret_type =RET_INTEGER , .arg1_type =ARG_PTR_TO_BTF_ID , + .arg1_btf_id = &bpf_skb_output_btf_ids[0 ], .arg2_type =ARG_CONST_MAP_PTR , .arg3_type =ARG_ANYTHING , .arg4_type =ARG_PTR_TO_MEM , .arg5_type =ARG_CONST_SIZE_OR_ZERO , - .btf_id = bpf_skb_output_btf_ids, };static unsigned short bpf_tunnel_key_af (u64 flags)
@@ -4199,19 +4198,18 @@ static const struct bpf_func_proto bpf_xdp_event_output_proto = { .arg5_type = ARG_CONST_SIZE_OR_ZERO, }; -BTF_ID_LIST (bpf_xdp_output_btf_ids) -BTF_ID(struct, xdp_buff) +BTF_ID_LIST_SINGLE(bpf_xdp_output_btf_ids, struct, xdp_buff)const struct bpf_func_proto bpf_xdp_output_proto = { .func = bpf_xdp_event_output, .gpl_only = true, .ret_type =RET_INTEGER , .arg1_type =ARG_PTR_TO_BTF_ID , + .arg1_btf_id = &bpf_xdp_output_btf_ids[0 ], .arg2_type =ARG_CONST_MAP_PTR , .arg3_type =ARG_ANYTHING , .arg4_type =ARG_PTR_TO_MEM , .arg5_type =ARG_CONST_SIZE_OR_ZERO , - .btf_id = bpf_xdp_output_btf_ids, }; BPF_CALL_1(bpf_get_socket_cookie, struct sk_buff *, skb)
@@ -9907,17 +9905,6 @@ BTF_SOCK_TYPE_xxxu32 btf_sock_ids[MAX_BTF_SOCK_TYPE ];#endif -static bool check_arg_btf_id (u32 btf_id,u32 arg) -{ -int i; - -/* only one argument, no need to check arg */ -for (i =0 ; i <MAX_BTF_SOCK_TYPE ; i++) -if (btf_sock_ids[i] == btf_id) -return true; -return false; -} - BPF_CALL_1(bpf_skc_to_tcp6_sock, struct sock *, sk) {/* tcp6_sock type is not generated in dwarf and hence btf,
@@ -9936,7 +9923,7 @@ const struct bpf_func_proto bpf_skc_to_tcp6_sock_proto = { .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, .arg1_type = ARG_PTR_TO_BTF_ID, - .check_btf_id = check_arg_btf_id, + .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_TCP6], };
@@ -9953,7 +9940,7 @@ const struct bpf_func_proto bpf_skc_to_tcp_sock_proto = { .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, .arg1_type = ARG_PTR_TO_BTF_ID, - .check_btf_id = check_arg_btf_id, + .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_TCP], };
@@ -9977,7 +9964,7 @@ const struct bpf_func_proto bpf_skc_to_tcp_timewait_sock_proto = { .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, .arg1_type = ARG_PTR_TO_BTF_ID, - .check_btf_id = check_arg_btf_id, + .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_TCP_TW], };
@@ -10001,7 +9988,7 @@ const struct bpf_func_proto bpf_skc_to_tcp_request_sock_proto = { .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, .arg1_type = ARG_PTR_TO_BTF_ID, - .check_btf_id = check_arg_btf_id, + .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_TCP_REQ], };
@@ -10023,6 +10010,6 @@ const struct bpf_func_proto bpf_skc_to_udp6_sock_proto = { .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, .arg1_type = ARG_PTR_TO_BTF_ID, - .check_btf_id = check_arg_btf_id, + .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_UDP6], };
net/ipv4/bpf_tcp_ca.c +5 -14
@@ -28,23 +28,18 @@ static u32 unsupported_ops[] = {static const struct btf_type *tcp_sock_type;static u32 tcp_sock_id, sock_id; -static int btf_sk_storage_get_ids[5 ];static struct bpf_func_proto btf_sk_storage_get_proto__read_mostly ; - -static int btf_sk_storage_delete_ids[5 ];static struct bpf_func_proto btf_sk_storage_delete_proto__read_mostly ; -static void convert_sk_func_proto (struct bpf_func_proto *to,int *to_btf_ids, -const struct bpf_func_proto *from) +static void convert_sk_func_proto (struct bpf_func_proto *to,const struct bpf_func_proto *from) {int i; *to = *from; - to->btf_id = to_btf_ids;for (i =0 ; i <ARRAY_SIZE (to->arg_type); i++) {if (to->arg_type[i] ==ARG_PTR_TO_SOCKET ) { to->arg_type[i] =ARG_PTR_TO_BTF_ID ; - to->btf_id[i] = tcp_sock_id; + to->arg_btf_id[i] = &tcp_sock_id; } } }
@@ -64,12 +59,8 @@ static int bpf_tcp_ca_init(struct btf *btf) tcp_sock_id = type_id; tcp_sock_type =btf_type_by_id (btf, tcp_sock_id); -convert_sk_func_proto (&btf_sk_storage_get_proto, - btf_sk_storage_get_ids, - &bpf_sk_storage_get_proto); -convert_sk_func_proto (&btf_sk_storage_delete_proto, - btf_sk_storage_delete_ids, - &bpf_sk_storage_delete_proto); +convert_sk_func_proto (&btf_sk_storage_get_proto, &bpf_sk_storage_get_proto); +convert_sk_func_proto (&btf_sk_storage_delete_proto, &bpf_sk_storage_delete_proto);return 0 ; }
@@ -185,8 +176,8 @@ static const struct bpf_func_proto bpf_tcp_send_ack_proto = {/* In case we want to report error later */ .ret_type = RET_INTEGER, .arg1_type = ARG_PTR_TO_BTF_ID, + .arg1_btf_id = &tcp_sock_id, .arg2_type = ARG_ANYTHING, - .btf_id = &tcp_sock_id, }; static const struct bpf_func_proto *
Signature · 1 line
2.25.1
Re: [PATCH bpf-next v3 04/11] bpf: allow specifying a BTF ID per argument in function protos
Quoted 14 lines · Lorenz Bauer
Function prototypes using
ARG_PTR_TO_BTF_IDcurrently use two ways to signal which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of IDs, one for each argument. This array is only accessed up to the highest numbered argument that usesARG_PTR_TO_BTF_IDand may therefore be less than five arguments long. It usually points at aBTF_ID_LIST. Second,check_btf_idis a function pointer that is called by the verifier if present. It gets the actual BTF ID of the register, and the argument number we're currently checking. It turns out that the only usercheck_arg_btf_idignores the argument, and is simply used to check whether the BTF ID has a structsock_commonat it's start.Replace both of these mechanisms with an explicit BTF ID for each argument in a function proto. Thanks to
btf_struct_ids_matchthis is very flexible:check_arg_btf_idcan be replaced by requiring structsock_common.
[ ... ]
Quoted 23 lines
kernel/bpf/verifier.c +1
-14@@ -4002,29 +4001,23 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, goto err_type; } }else if (arg_type ==ARG_PTR_TO_BTF_ID ) { -bool ids_match = false; +const u32 *btf_id = fn->arg_btf_id[arg]; expected_type =PTR_TO_BTF_ID ;if (type != expected_type) goto err_type; -if (!fn->check_btf_id) { -if (reg->btf_id != meta->btf_id) { - ids_match =btf_struct_ids_match (&env->log, reg->off, reg->btf_id, - meta->btf_id); -if (!ids_match) { -verbose (env,"Helper has type %s got %s in R%d\n" , -kernel_type_name (meta->btf_id), -kernel_type_name (reg->btf_id), regno); -return -EACCES ; - } - } - }else if (!fn->check_btf_id (reg->btf_id, arg)) { - verbose(env, "Helper does not support %s in R%d\n",
kernel/bpf/verifier.c static int check_func_arg(struct bpf_verifier_env *env, u32 arg, · line 4017
Quoted 10 lines
kernel/bpf/verifier.c +8
-1- kernel_type_name(reg->btf_id), regno); +if (!btf_id) { +verbose (env,"verifier internal error: missing BTF ID\n" ); +return -EFAULT ; + } + +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *btf_id)) { +verbose (env,"R%d has incompatible type %s\n" , regno, +kernel_type_name (reg->btf_id));
The original log has the expected kernel type also which will be a useful info. It could be a follow up.
Re: [PATCH bpf-next v3 04/11] bpf: allow specifying a BTF ID per argument in function protos
Quoted 1 line · Martin KaFai Lau
[...]
Quoted 8 lines
kernel/bpf/verifier.c static int check_func_arg(struct bpf_verifier_env *env, u32 arg, · line 4017
Quoted 4 lines
kernel/bpf/verifier.c +4
-0+ +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *btf_id)) { +verbose (env,"R%d has incompatible type %s\n" , regno, +kernel_type_name (reg->btf_id));The original log has the expected kernel type also which will be a useful info. It could be a follow up.
Acked-by Martin KaFai Lau <[email protected]>
Good idea. I'll way for feedback from Daniel or Alexei, and roll it into a v4 or do a follow up.
Signature · 4 lines
Lorenz Bauer | Systems Engineer 6th Floor, County Hall/The Riverside Building, SE1 7PB, UK www.cloudflare.com
PATCH v3 5/11 bpf: make BTF pointer type checking generic
In reply to Lorenz BauerPerform BTF type checks if the register we're working on contains a BTF pointer, rather than if the argument is for a BTF pointer. This is easier to understand, and allows removing the code from the arg_type checking section of the function.
--- kernel/bpf/verifier.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-)
kernel/bpf/verifier.c +20 -18
@@ -4001,27 +4001,9 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, goto err_type; } }else if (arg_type ==ARG_PTR_TO_BTF_ID ) { -const u32 *btf_id = fn->arg_btf_id[arg]; - expected_type =PTR_TO_BTF_ID ;if (type != expected_type) goto err_type; - -if (!btf_id) { -verbose (env,"verifier internal error: missing BTF ID\n" ); -return -EFAULT ; - } - -if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *btf_id)) { -verbose (env,"R%d has incompatible type %s\n" , regno, -kernel_type_name (reg->btf_id)); -return -EACCES ; - } -if (!tnum_is_const (reg->var_off) || reg->var_off.value) { -verbose (env,"R%d is a pointer to in-kernel struct with non-zero offset\n" , - regno); -return -EACCES ; - } }else if (arg_type ==ARG_PTR_TO_SPIN_LOCK ) {if (meta->func_id == BPF_FUNC_spin_lock) {if (process_spin_lock (env, regno, true))
@@ -4076,6 +4058,26 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,return -EFAULT ; } +if (type ==PTR_TO_BTF_ID ) { +const u32 *btf_id = fn->arg_btf_id[arg]; + +if (!btf_id) { +verbose (env,"verifier internal error: missing BTF ID\n" ); +return -EFAULT ; + } + +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *btf_id)) { +verbose (env,"R%d has incompatible type %s\n" , regno, +kernel_type_name (reg->btf_id)); +return -EACCES ; + } +if (!tnum_is_const (reg->var_off) || reg->var_off.value) { +verbose (env,"R%d is a pointer to in-kernel struct with non-zero offset\n" , + regno); +return -EACCES ; + } + } +if (arg_type ==ARG_CONST_MAP_PTR ) {/* bpf_map_xxx(map_ptr) call: remember that map_ptr */ meta->map_ptr = reg->map_ptr;
Signature · 1 line
2.25.1
PATCH v3 6/11 bpf: make reference tracking generic
In reply to Lorenz BauerInstead of dealing with reg->ref_obj_id individually for every arg type that needs it, rely on the fact that ref_obj_id is zero if the register is not reference tracked.
--- kernel/bpf/verifier.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-)
kernel/bpf/verifier.c +10 -16
@@ -3983,15 +3983,6 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,/* Any sk pointer can be ARG_PTR_TO_SOCK_COMMON */ if (!type_is_sk_pointer (type)) goto err_type; -if (reg->ref_obj_id) { -if (meta->ref_obj_id) { -verbose (env,"verifier internal error: more than one arg with ref_obj_id R%d %u %u\n" , - regno, reg->ref_obj_id, - meta->ref_obj_id); -return -EFAULT ; - } - meta->ref_obj_id = reg->ref_obj_id; - } }else if (arg_type ==ARG_PTR_TO_SOCKET || arg_type ==ARG_PTR_TO_SOCKET_OR_NULL ) { expected_type =PTR_TO_SOCKET ;
@@ -4040,13 +4031,6 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,/* final test in check_stack_boundary() */ ; else if (type != expected_type) goto err_type; -if (meta->ref_obj_id) { -verbose (env,"verifier internal error: more than one arg with ref_obj_id R%d %u %u\n" , - regno, reg->ref_obj_id, - meta->ref_obj_id); -return -EFAULT ; - } - meta->ref_obj_id = reg->ref_obj_id; }else if (arg_type_is_int_ptr (arg_type)) { expected_type =PTR_TO_STACK ; if (!type_is_pkt_pointer(type) &&
@@ -4078,6 +4062,16 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, } } +if (reg->ref_obj_id) { +if (meta->ref_obj_id) { +verbose (env,"verifier internal error: more than one arg with ref_obj_id R%d %u %u\n" , + regno, reg->ref_obj_id, + meta->ref_obj_id); +return -EFAULT ; + } + meta->ref_obj_id = reg->ref_obj_id; + } +if (arg_type ==ARG_CONST_MAP_PTR ) {/* bpf_map_xxx(map_ptr) call: remember that map_ptr */ meta->map_ptr = reg->map_ptr;
Signature · 1 line
2.25.1
PATCH v3 7/11 bpf: make context access check generic
In reply to Lorenz BauerAlways check context access if the register we're operating on is PTR_TO_CTX, rather than relying on ARG_PTR_TO_CTX. This allows simplifying the arg_type checking section of the function.
--- kernel/bpf/verifier.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
kernel/bpf/verifier.c +4 -3
@@ -3974,9 +3974,6 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, arg_type == ARG_PTR_TO_CTX_OR_NULL)) {if (type != expected_type) goto err_type; - err =check_ctx_reg (env, reg, regno); -if (err <0 ) -return err; } }else if (arg_type ==ARG_PTR_TO_SOCK_COMMON ) { expected_type =PTR_TO_SOCK_COMMON ;
@@ -4060,6 +4057,10 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, regno);return -EACCES ; } + }else if (type ==PTR_TO_CTX ) { + err =check_ctx_reg (env, reg, regno); +if (err <0 ) +return err; }if (reg->ref_obj_id) {
Signature · 1 line
2.25.1
PATCH v3 8/11 bpf: set meta->raw_mode for pointers close to use
In reply to Lorenz BauerIf we encounter a pointer to memory, we set meta->raw_mode depending on the type of memory we point at. What isn't obvious is that this information is only used when the next memory size argument is encountered.
Move the assignment closer to where it's used, and add a comment that explains what is going on.
--- kernel/bpf/verifier.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
kernel/bpf/verifier.c +5 -1
@@ -4020,7 +4020,6 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, type != PTR_TO_RDWR_BUF && type != expected_type) goto err_type; - meta->raw_mode = arg_type ==ARG_PTR_TO_UNINIT_MEM ; }else if (arg_type_is_alloc_mem_ptr (arg_type)) { expected_type =PTR_TO_MEM ; if (register_is_null(reg) &&
@@ -4109,6 +4108,11 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, err =check_helper_mem_access (env, regno, meta->map_ptr->value_size, false, meta); + }else if (arg_type_is_mem_ptr (arg_type)) { +/* The access to this pointer is only checked when we hit the +* next is_mem_size argument below. +*/ + meta->raw_mode = (arg_type ==ARG_PTR_TO_UNINIT_MEM ); }else if (arg_type_is_mem_size (arg_type)) {bool zero_size_allowed = (arg_type ==ARG_CONST_SIZE_OR_ZERO );
Signature · 1 line
2.25.1
PATCH v3 9/11 bpf: check ARG_PTR_TO_SPINLOCK register type in check_func_arg
In reply to Lorenz BauerMove the check for PTR_TO_MAP_VALUE to check_func_arg, where all other checking is done as well. Move the invocation of process_spin_lock away from the register type checking, to allow a future refactoring.
--- kernel/bpf/verifier.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
kernel/bpf/verifier.c +14 -14
@@ -3781,10 +3781,6 @@ static int process_spin_lock(struct bpf_verifier_env *env, int regno,struct bpf_map *map = reg->map_ptr;u64 val = reg->var_off.value; -if (reg->type !=PTR_TO_MAP_VALUE ) { -verbose (env,"R%d is not a pointer to map_value\n" , regno); -return -EINVAL ; - }if (!is_const) { verbose(env, "R%d doesn't have constant offset. bpf_spin_lock has to be at the constant offset\n",
@@ -3993,16 +3989,9 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,if (type != expected_type) goto err_type; }else if (arg_type ==ARG_PTR_TO_SPIN_LOCK ) { -if (meta->func_id == BPF_FUNC_spin_lock) { -if (process_spin_lock (env, regno, true)) -return -EACCES ; - }else if (meta->func_id == BPF_FUNC_spin_unlock) { -if (process_spin_lock (env, regno, false)) -return -EACCES ; - }else { -verbose (env,"verifier internal error\n" ); -return -EFAULT ; - } + expected_type =PTR_TO_MAP_VALUE ; +if (type != expected_type) + goto err_type; }else if (arg_type_is_mem_ptr (arg_type)) { expected_type =PTR_TO_STACK ;/* One exception here. In case function allows for NULL to be
@@ -4108,6 +4097,17 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, err =check_helper_mem_access (env, regno, meta->map_ptr->value_size, false, meta); + }else if (arg_type ==ARG_PTR_TO_SPIN_LOCK ) { +if (meta->func_id == BPF_FUNC_spin_lock) { +if (process_spin_lock (env, regno, true)) +return -EACCES ; + }else if (meta->func_id == BPF_FUNC_spin_unlock) { +if (process_spin_lock (env, regno, false)) +return -EACCES ; + }else { +verbose (env,"verifier internal error\n" ); +return -EFAULT ; + } }else if (arg_type_is_mem_ptr (arg_type)) {/* The access to this pointer is only checked when we hit the * next is_mem_size argument below.
Signature · 1 line
2.25.1
PATCH v3 10/11 bpf: hoist type checking for nullable arg types
In reply to Lorenz Bauercheck_func_arg has a plethora of weird if statements with empty branches. They work around the fact that *_OR_NULL argument types should accept a SCALAR_VALUE register, as long as it's value is 0. These statements make it difficult to reason about the type checking logic.
Instead, skip more detailed type checking logic iff the register is 0, and the function expects a nullable type. This allows simplifying the type checking itself.
--- kernel/bpf/verifier.c | 64 ++++++++++++++++++++----------------------- 1 file changed, 30 insertions(+), 34 deletions(-)
kernel/bpf/verifier.c +30 -34
@@ -435,6 +435,15 @@ static bool arg_type_may_be_refcounted(enum bpf_arg_type type)return type ==ARG_PTR_TO_SOCK_COMMON ; } +static bool arg_type_may_be_null (enum bpf_arg_type type) +{ +return type ==ARG_PTR_TO_MAP_VALUE_OR_NULL || + type ==ARG_PTR_TO_MEM_OR_NULL || + type ==ARG_PTR_TO_CTX_OR_NULL || + type ==ARG_PTR_TO_SOCKET_OR_NULL || + type ==ARG_PTR_TO_ALLOC_MEM_OR_NULL ; +} +/* Determine whether the function releases some resources allocated by another * function call. The first reference type argument will be assumed to be * released by release_reference().
@@ -3941,17 +3950,20 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,return err; } +if (register_is_null (reg) &&arg_type_may_be_null (arg_type)) +/* A NULL register has a SCALAR_VALUE type, so skip +* type checking. +*/ + goto skip_type_check; +if (arg_type ==ARG_PTR_TO_MAP_KEY || arg_type ==ARG_PTR_TO_MAP_VALUE || arg_type ==ARG_PTR_TO_UNINIT_MAP_VALUE || arg_type ==ARG_PTR_TO_MAP_VALUE_OR_NULL ) { expected_type =PTR_TO_STACK ; -if (register_is_null (reg) && - arg_type ==ARG_PTR_TO_MAP_VALUE_OR_NULL ) -/* final test in check_stack_boundary() */ ; -else if (!type_is_pkt_pointer (type) && - type !=PTR_TO_MAP_VALUE && - type != expected_type) +if (!type_is_pkt_pointer (type) && + type !=PTR_TO_MAP_VALUE && + type != expected_type) goto err_type; } else if (arg_type == ARG_CONST_SIZE || arg_type == ARG_CONST_SIZE_OR_ZERO ||
@@ -3966,11 +3978,8 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, }else if (arg_type ==ARG_PTR_TO_CTX || arg_type ==ARG_PTR_TO_CTX_OR_NULL ) { expected_type =PTR_TO_CTX ; -if (!(register_is_null (reg) && - arg_type ==ARG_PTR_TO_CTX_OR_NULL )) { -if (type != expected_type) - goto err_type; - } +if (type != expected_type) + goto err_type; }else if (arg_type ==ARG_PTR_TO_SOCK_COMMON ) { expected_type =PTR_TO_SOCK_COMMON ;/* Any sk pointer can be ARG_PTR_TO_SOCK_COMMON */
@@ -3979,11 +3988,8 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, }else if (arg_type ==ARG_PTR_TO_SOCKET || arg_type ==ARG_PTR_TO_SOCKET_OR_NULL ) { expected_type =PTR_TO_SOCKET ; -if (!(register_is_null (reg) && - arg_type ==ARG_PTR_TO_SOCKET_OR_NULL )) { -if (type != expected_type) - goto err_type; - } +if (type != expected_type) + goto err_type; }else if (arg_type ==ARG_PTR_TO_BTF_ID ) { expected_type =PTR_TO_BTF_ID ;if (type != expected_type)
@@ -3994,27 +4000,16 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg, goto err_type; }else if (arg_type_is_mem_ptr (arg_type)) { expected_type =PTR_TO_STACK ; -/* One exception here. In case function allows for NULL to be -* passed in as argument, it's a SCALAR_VALUE type. Final test -* happens during stack boundary checking. -*/ -if (register_is_null (reg) && - (arg_type ==ARG_PTR_TO_MEM_OR_NULL || - arg_type ==ARG_PTR_TO_ALLOC_MEM_OR_NULL )) -/* final test in check_stack_boundary() */ ; -else if (!type_is_pkt_pointer (type) && - type !=PTR_TO_MAP_VALUE && - type !=PTR_TO_MEM && - type !=PTR_TO_RDONLY_BUF && - type !=PTR_TO_RDWR_BUF && - type != expected_type) +if (!type_is_pkt_pointer (type) && + type !=PTR_TO_MAP_VALUE && + type !=PTR_TO_MEM && + type !=PTR_TO_RDONLY_BUF && + type !=PTR_TO_RDWR_BUF && + type != expected_type) goto err_type; }else if (arg_type_is_alloc_mem_ptr (arg_type)) { expected_type =PTR_TO_MEM ; -if (register_is_null (reg) && - arg_type ==ARG_PTR_TO_ALLOC_MEM_OR_NULL ) -/* final test in check_stack_boundary() */ ; -else if (type != expected_type) +if (type != expected_type) goto err_type; }else if (arg_type_is_int_ptr (arg_type)) { expected_type =PTR_TO_STACK ;
@@ -4051,6 +4046,7 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,return err; } +skip_type_check:if (reg->ref_obj_id) {if (meta->ref_obj_id) { verbose(env, "verifier internal error: more than one arg with ref_obj_id R%d %u %u\n",
Signature · 1 line
2.25.1
PATCH v3 11/11 bpf: use a table to drive helper arg type checks
In reply to Lorenz BauerThe mapping between bpf_arg_type and bpf_reg_type is encoded in a big hairy if statement that is hard to follow. The debug output also leaves to be desired: if a reg_type doesn't match we only print one of the options, instead printing all the valid ones.
Convert the if statement into a table which is then used to drive type checking. If none of the reg_types match we print all options, e.g.:
R2 type=rdonly_buf expected=fp, pkt, pkt_meta, map_value
--- include/linux/bpf.h | 1 + kernel/bpf/verifier.c | 183 +++++++++++++++++++++++++----------------- 2 files changed, 110 insertions(+), 74 deletions(-)
include/linux/bpf.h +1 -0
@@ -292,6 +292,7 @@ enum bpf_arg_type {ARG_PTR_TO_ALLOC_MEM ,/* pointer to dynamically allocated memory */ ARG_PTR_TO_ALLOC_MEM_OR_NULL ,/* pointer to dynamically allocated memory or NULL */ ARG_CONST_ALLOC_SIZE_OR_ZERO ,/* number of allocated bytes requested */ + __BPF_ARG_TYPE_MAX, };/* type of values returned from helper functions */
kernel/bpf/verifier.c +109 -74
217 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH bpf-next v3 11/11] bpf: use a table to drive helper arg type checks
Quoted 9 lines · Lorenz Bauer
The mapping between
bpf_arg_typeandbpf_reg_typeis encoded in a big hairy if statement that is hard to follow. The debug output also leaves to be desired: if areg_typedoesn't match we only print one of the options, instead printing all the valid ones.Convert the if statement into a table which is then used to drive type checking. If none of the
reg_typesmatch we print all options, e.g.:R2 type=rdonly_buf expected=fp, pkt,
pkt_meta,map_value
Quoted 30 lines · Lorenz Bauer
Another round of review from Martin, thanks!
Changes in v3:
- FixBTF_ID_LIST_SINGLEif BTF is disabled (Martin)
- Drop incorrectarg_btf_idinbpf_sk_storage.c(Martin)
- Check forarg_btf_idincheck_func_proto(Martin)
- Drop incorrectPTR_TO_BTF_IDfromfullsock_types(Martin)
- Introducebtf_seq_file_idsinbpf_trace.cto reduce duplicationChanges in v2:
- Make the series stand alone (Martin)
- Drop incorrectBTF_SET_STARTfix (Andrii)
- Only support a single BTF ID per argument (Martin)
- IntroduceBTF_ID_LIST_SINGLEmacro (Andrii)
- Skipcheck_ctx_regiff register is NULL
- Change output ofcheck_reg_typeslightly, to avoid touching testsOriginal cover letter:
Currently,
check_func_arghas this pretty gnarly if statement that compares the validarg_typewith the actualyreg_type. Sprinkled in-between are checks forregister_is_null, to short circuit these tests if we're dealing with a nullablearg_type. There is also some code for later bounds / access checking hidden away in there.This series of patches refactors the function into something like this:
if (reg_is_null && arg_type_is_nullable) skip type checking
Quoted 7 lines
do type checking, including BTF validation
do bounds / access checking
The type checking is now table driven, which makes it easy to extend the acceptable types. Maybe more importantly, using a table makes it easy to provide more helpful verifier output (see the last patch).
This set is currently marked as "Changes Requested". Since there is no other comment since then, can you respin v4?
Quoted 3 lines · Martin KaFai Lau
This set is currently marked as "Changes Requested". Since there is no other comment since then, can you respin v4?
I guess that explains why I was waiting for review :) Thanks for nudging me.
Signature · 4 lines
Lorenz Bauer | Systems Engineer 6th Floor, County Hall/The Riverside Building, SE1 7PB, UK www.cloudflare.com