i2c: i2c-gpio: Convert to use APIs which support live DT
PATCH 1/1 i2c: i2c-gpio: Convert to use APIs which support live DT
Use ofnode_ or dev_ APIs instead of fdt_ and fdtdec_ APIs so that the driver can support live DT.
Signed-off-by Patrick Delaunay <[email protected]>
---
drivers/i2c/i2c-gpio.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
drivers/i2c/i2c-gpio.c +3 -7
@@ -18,8 +18,6 @@#define I2C_ACK 0#define I2C_NOACK 1 -DECLARE_GLOBAL_DATA_PTR ; -enum {PIN_SDA =0 ,PIN_SCL ,
@@ -334,8 +332,6 @@ static int i2c_gpio_drv_probe(struct udevice *dev)static int i2c_gpio_ofdata_to_platdata (struct udevice *dev) {struct i2c_gpio_bus *bus =dev_get_priv (dev); -const void *blob = gd->fdt_blob; -int node =dev_of_offset (dev);int ret; ret = gpio_request_list_by_name(dev, "gpios", bus->gpios,
@@ -343,12 +339,12 @@ static int i2c_gpio_ofdata_to_platdata(struct udevice *dev)if (ret <0 ) goto error; - bus->udelay =fdtdec_get_int (blob, node,"i2c-gpio,delay-us" , -DEFAULT_UDELAY ); + bus->udelay =dev_read_u32_default (dev,"i2c-gpio,delay-us" , +DEFAULT_UDELAY ); bus->get_sda = i2c_gpio_sda_get; bus->set_sda = i2c_gpio_sda_set; -if (fdtdec_get_bool (blob, node,"i2c-gpio,scl-output-only" )) +if (dev_read_bool (dev,"i2c-gpio,scl-output-only" )) bus->set_scl = i2c_gpio_scl_set_output_only;else bus->set_scl = i2c_gpio_scl_set;
Signature · 1 line
2.17.1
PATCH 1/1 i2c: i2c-gpio: Convert to use APIs which support live DT
Hello Patrick,
Am 10.09.2020 um 18:25 schrieb Patrick Delaunay:
Quoted 8 lines
Use
ofnode_ordev_APIs instead offdt_andfdtdec_APIs so that the driver can support live DT.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/i2c/i2c-gpio.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-)
Reviewed-by Heiko Schocher <[email protected]>
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 1/1 i2c: i2c-gpio: Convert to use APIs which support live DT
In reply to Patrick DelaunayQuoted 5 lines · Patrick Delaunay
Use
ofnode_ordev_APIs instead offdt_andfdtdec_APIs so that the driver can support live DT.Signed-off-by Patrick Delaunay <[email protected]>Reviewed-by Heiko Schocher <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 659 bytes Desc: not available URL: <https://lists.denx.de/pipermail/u-boot/attachments/20201024/83ba47f6/attachment.sig>