Skip to contentSkip to conversation

hwmon: pmbus: max20730: adjust the vout reading given voltage divider

PATCH Superseded Chu Lin 1 participant 2 messages Sep 10, 2020 Hardware monitoring

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Chu Lin

author
#0 lore raw

PATCH 1/1 hwmon: pmbus: max20730: adjust the vout reading given voltage divider

Problem:
We use voltage dividers so that the voltage presented at the voltage sense pins is confusing. We might need to convert these readings to more meaningful readings given the voltage divider.

Solution:
Read the voltage divider resistance from dts and convert the voltage reading to a more meaningful reading.

Testing:
max20730 with voltage divider

---
 drivers/hwmon/pmbus/max20730.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/hwmon/pmbus/max20730.c +16 -0
index c0bb05487e0e..4b56810fa894 100644
@@ -29,6 +29,7 @@ struct max20730_data {
 	struct pmbus_driver_info info;
 	struct mutex lock;	/* Used to protect against parallel writes */
 	u16 mfr_devset1;
+	u32 vout_voltage_divider[2];
 };
 
 #define to_max20730_data(x)  container_of(x, struct max20730_data, info)
@@ -111,6 +112,12 @@ static int max20730_read_word_data(struct i2c_client *client, int page,
 		max_c = max_current[data->id][(data->mfr_devset1 >> 5) & 0x3];
 		ret = val_to_direct(max_c, PSC_CURRENT_OUT, info);
 		break;
+	case PMBUS_READ_VOUT:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (data->vout_voltage_divider[0] && data->vout_voltage_divider[1])
+			ret = DIV_ROUND_CLOSEST(ret * data->vout_voltage_divider[1],
+						data->vout_voltage_divider[0]);
+		break;
 	default:
 		ret = -ENODATA;
 		break;
@@ -329,6 +336,15 @@ static int max20730_probe(struct i2c_client *client,
 	data->id = chip_id;
 	mutex_init(&data->lock);
 	memcpy(&data->info, &max20730_info[chip_id], sizeof(data->info));
+	if (of_property_read_u32_array(client->dev.of_node, "vout-voltage-divider",
+				       data->vout_voltage_divider,
+				       ARRAY_SIZE(data->vout_voltage_divider)) != 0)
+		memset(data->vout_voltage_divider, 0, sizeof(data->vout_voltage_divider));
+	if (data->vout_voltage_divider[1] < data->vout_voltage_divider[0]) {
+		dev_err(dev,
+			"The total resistance of voltage divider is less than output resistance\n");
+		return -ENODEV;
+	}
 
 	ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET1);
 	if (ret < 0)
Signature · 1 line
2.28.0.526.ge36021eeef-goog
author
#1 lore raw

The same patch got sent twice. Please, discard this one.

Thanks,
Chu

Quoted 62 lines · Chu Lin

Problem:
We use voltage dividers so that the voltage presented at the voltage sense pins is confusing. We might need to convert these readings to more meaningful readings given the voltage divider.

Solution:
Read the voltage divider resistance from dts and convert the voltage reading to a more meaningful reading.

Testing:
max20730 with voltage divider

---
 drivers/hwmon/pmbus/max20730.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
drivers/hwmon/pmbus/max20730.c +16 -1
index c0bb05487e0e..4b56810fa894 100644
@@ -29,6 +29,7 @@ struct max20730_data {
        struct pmbus_driver_info info;
        struct mutex lock;      /* Used to protect against parallel writes */
        u16 mfr_devset1;
+       u32 vout_voltage_divider[2];
 };
 
 #define to_max20730_data(x)  container_of(x, struct max20730_data, info)
@@ -111,6 +112,12 @@ static int max20730_read_word_data(struct i2c_client *client, int page,
                max_c = max_current[data->id][(data->mfr_devset1 >> 5) & 0x3];
                ret = val_to_direct(max_c, PSC_CURRENT_OUT, info);
                break;
+       case PMBUS_READ_VOUT:
+               ret = pmbus_read_word_data(client, page, phase, reg);
+               if (data->vout_voltage_divider[0] && data->vout_voltage_divider[1])
+                       ret = DIV_ROUND_CLOSEST(ret * data->vout_voltage_divider[1],
+                                               data->vout_voltage_divider[0]);
+               break;
        default:
                ret = -ENODATA;
                break;
@@ -329,6 +336,15 @@ static int max20730_probe(struct i2c_client *client,
        data->id = chip_id;
        mutex_init(&data->lock);
        memcpy(&data->info, &max20730_info[chip_id], sizeof(data->info));
+       if (of_property_read_u32_array(client->dev.of_node, "vout-voltage-divider",
+                                      data->vout_voltage_divider,
+                                      ARRAY_SIZE(data->vout_voltage_divider)) != 0)
+               memset(data->vout_voltage_divider, 0, sizeof(data->vout_voltage_divider));
+       if (data->vout_voltage_divider[1] < data->vout_voltage_divider[0]) {
+               dev_err(dev,
+                       "The total resistance of voltage divider is less than output resistance\n");
+               return -ENODEV;
+       }
 
        ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET1);
        if (ret < 0)
--

2.28.0.526.ge36021eeef-goog