Skip to contentSkip to conversation

iio: remaining easy of_match_ptr removal and related.

PATCH In review Jonathan Cameron 6 participants 55 messages Sep 10, 2020 – Sep 29, 2020

Subsystems (5)
lore
Share & tools
lore

Jonathan Cameron

author maintainer
#0 lore raw

cover iio: remaining easy of_match_ptr removal and related.

From: Jonathan Cameron <[email protected]>

This bumper set removes all the remaining cases where of_match_ptr is mostly serving to prevent use of the device via ACPI PRP0001 and complicating the code. The main aim of this set is to reduce the chances of it being used in future drivers.
It also includes some related refactorings, use of generic fw accessors, dropping of CONFIG_OF and lots of header changes inline with the above.

For examples of how to use PRP0001 see https://github.com/westeri/meta-acpi
which is an excellent resource from which to copy snippets of DSDT tables.

It may well not be worth changing the remaining 10 IIO drivers and I certainly don't plan to do so anytime soon.

Jonathan Cameron (38):
iio:potentiometer:ad5272: Drop of_match_ptr and CONFIG_OF protections. iio:potentiometer:ds1803: Drop of_match_ptr and CONFIG_OF protections iio:potentiometer:max5432: Drop of_match_ptr and use generic fw
accessors
iio:potentiometer:max5481: Drop of_match_ptr and CONFIG_OF
protections.
iio:potentiometer:max5481: Drop invalid ACPI binding. iio:potentiometer:mcp4018: Drop of_match_ptr and CONFIG_OF
protections.
iio:potentiometer:mcp4131: Drop of_match_ptr and use generic fw
interfaces.
iio:potentiometer:mcp4531: Drop of_match_ptr and CONFIG_OF
protections.
iio:dac:ad5446: Drop of_match_ptr and CONFIG_OF protections iio:dac:ad5592r: Drop of_match_ptr and ACPI_PTR protections. iio:dac:ad5593r: Drop of_match_ptr and ACPI_PTR protections. iio:dac:ad7303: Drop of_match_ptr protection iio:dac:mcp4725: drop of_match_ptr and use generic fw properties iio:dac:ti-dac082s085: Drop of_match_ptr and CONFIG_OF protections iio:dac:ti-dac5571: Drop of_match_ptr and CONFIG_OF protections iio:potentiostat:lmp91000: Drop of_match_ptr and use generic fw
accessors
iio:pressure:icp10100: Drop of_match_ptr and CONFIG_OF protections iio:pressure:ms5611: Drop of_match_ptr and CONFIG_OF protections iio:pressure:ms5637: Drop of_match_ptr protection iio:pressure:zpa2326: Drop of_match_ptr protection iio:temperature:tsys01: Drop of_match_ptr protection iio:temperature:tmp007: Drop of_match_ptr protection iio:resolver:ad2s1200: Drop of_match_ptr protection iio:chemical:ams-iaq-core: Drop of_match_ptr protection iio:chemical:atlas-sensor: Drop of_match_ptr and use generic fw
accessors
iio:chemical:sgp30: Use local variable dev to simplify code iio:chemical:sgp30: Drop of_match_ptr and use generic fw accessors iio:chemical:vz89x: Introduce local struct device pointer. iio:chemical:vz89x: Drop of_match_ptr protection and use generic fw
accessors
iio:humidity:hdc100x: Drop of_match_ptr protection. iio:proximity:as3935: Use local struct device pointer to simplify
code.
iio:proximity:as3935: Drop of_match_ptr and use generic fw accessors iio:proximity:pulsedlight: Drop of_match_ptr protection iio:magn:ak8975: Drop of_match_ptr and ACPI_PTR protections. iio:magn:ak8974: Drop of_match_ptr protection iio:humidity:htu21: Drop of_match_ptr protection iio:humidity:si7020: Drop of_match_ptr protection iio:health:max30102: Drop of_match_ptr and use generic fw accessors

 drivers/iio/chemical/ams-iaq-core.c           |  3 +-
 drivers/iio/chemical/atlas-sensor.c           | 10 ++---
 drivers/iio/chemical/sgp30.c                  | 28 ++++++------
 drivers/iio/chemical/vz89x.c                  | 18 ++++----
 drivers/iio/dac/ad5446.c                      |  5 +--
 drivers/iio/dac/ad5592r.c                     |  7 ++-
 drivers/iio/dac/ad5593r.c                     |  7 ++-
 drivers/iio/dac/ad7303.c                      |  3 +-
 drivers/iio/dac/mcp4725.c                     | 29 +++---------
 drivers/iio/dac/ti-dac082s085.c               |  5 +--
 drivers/iio/dac/ti-dac5571.c                  |  7 +--
 drivers/iio/health/max30102.c                 | 11 +++--
 drivers/iio/humidity/hdc100x.c                |  3 +-
 drivers/iio/humidity/htu21.c                  |  3 +-
 drivers/iio/humidity/si7020.c                 |  3 +-
 drivers/iio/magnetometer/ak8974.c             |  3 +-
 drivers/iio/magnetometer/ak8975.c             |  8 ++--
 drivers/iio/potentiometer/ad5272.c            |  5 +--
 drivers/iio/potentiometer/ds1803.c            |  6 +--
 drivers/iio/potentiometer/max5432.c           |  8 ++--
 drivers/iio/potentiometer/max5481.c           | 23 ++--------
 drivers/iio/potentiometer/mcp4018.c           | 12 ++---
 drivers/iio/potentiometer/mcp4131.c           |  8 ++--
 drivers/iio/potentiometer/mcp4531.c           | 11 ++---
 drivers/iio/potentiostat/lmp91000.c           | 11 +++--
 drivers/iio/pressure/icp10100.c               |  3 +-
 drivers/iio/pressure/ms5611_i2c.c             |  6 +--
 drivers/iio/pressure/ms5611_spi.c             |  6 +--
 drivers/iio/pressure/ms5637.c                 |  3 +-
 drivers/iio/pressure/zpa2326_i2c.c            |  6 +--
 drivers/iio/pressure/zpa2326_spi.c            |  6 +--
 drivers/iio/proximity/as3935.c                | 44 +++++++++----------
 .../iio/proximity/pulsedlight-lidar-lite-v2.c |  3 +-
 drivers/iio/resolver/ad2s1200.c               |  3 +-
 drivers/iio/temperature/tmp007.c              |  4 +-
 drivers/iio/temperature/tsys01.c              |  3 +-
 36 files changed, 134 insertions(+), 190 deletions(-)
Signature · 1 line
2.28.0
author maintainer
#1 lore raw

PATCH 1/38 iio:potentiometer:ad5272: Drop of_match_ptr and CONFIG_OF protections.

From: Jonathan Cameron <[email protected]>

These prevent use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Drop them to remove this restriction.

Also added mod_devicetable.h include given use of struct of_device_id which is defined in that header.

---
 drivers/iio/potentiometer/ad5272.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/iio/potentiometer/ad5272.c +2 -3
index 933afcf7e925..70c45d346df0 100644
@@ -15,6 +15,7 @@
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 
 #define  AD5272_RDAC_WR  1
 #define  AD5272_RDAC_RD  2
@@ -192,7 +193,6 @@ static int ad5272_probe(struct i2c_client *client,
 	return devm_iio_device_register(dev, indio_dev);
 }
 
-#if defined(CONFIG_OF)
 static const struct of_device_id ad5272_dt_ids[] = {
 	{ .compatible = "adi,ad5272-020", .data = (void *)AD5272_020 },
 	{ .compatible = "adi,ad5272-050", .data = (void *)AD5272_050 },
@@ -202,7 +202,6 @@ static const struct of_device_id ad5272_dt_ids[] = {
 	{}
 };
 MODULE_DEVICE_TABLE(of, ad5272_dt_ids);
-#endif /* CONFIG_OF */
 
 static const struct i2c_device_id ad5272_id[] = {
 	{ "ad5272-020", AD5272_020 },
@@ -217,7 +216,7 @@ MODULE_DEVICE_TABLE(i2c, ad5272_id);
 static struct i2c_driver ad5272_driver = {
 	.driver = {
 		.name	= "ad5272",
-		.of_match_table = of_match_ptr(ad5272_dt_ids),
+		.of_match_table = ad5272_dt_ids,
 	},
 	.probe		= ad5272_probe,
 	.id_table	= ad5272_id,
Signature · 1 line
2.28.0
author maintainer
#2 lore raw

PATCH 2/38 iio:potentiometer:ds1803: Drop of_match_ptr and CONFIG_OF protections

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevent use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Drop them to remove this restriction.

Also switch of.h for mod_devicetable.h include given use of struct of_device_id which is defined in that header.

---
 drivers/iio/potentiometer/ds1803.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/iio/potentiometer/ds1803.c +2 -4
index 5c061ab8f46c..20b45407eaac 100644
@@ -14,7 +14,7 @@
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 
 #define DS1803_MAX_POS		255
 #define DS1803_WRITE(chan)	(0xa8 | ((chan) + 1))
@@ -134,7 +134,6 @@ static int ds1803_probe(struct i2c_client *client,
 	return devm_iio_device_register(dev, indio_dev);
 }
 
-#if defined(CONFIG_OF)
 static const struct of_device_id ds1803_dt_ids[] = {
 	{ .compatible = "maxim,ds1803-010", .data = &ds1803_cfg[DS1803_010] },
 	{ .compatible = "maxim,ds1803-050", .data = &ds1803_cfg[DS1803_050] },
@@ -142,7 +141,6 @@ static const struct of_device_id ds1803_dt_ids[] = {
 	{}
 };
 MODULE_DEVICE_TABLE(of, ds1803_dt_ids);
-#endif /* CONFIG_OF */
 
 static const struct i2c_device_id ds1803_id[] = {
 	{ "ds1803-010", DS1803_010 },
@@ -155,7 +153,7 @@ MODULE_DEVICE_TABLE(i2c, ds1803_id);
 static struct i2c_driver ds1803_driver = {
 	.driver = {
 		.name	= "ds1803",
-		.of_match_table = of_match_ptr(ds1803_dt_ids),
+		.of_match_table = ds1803_dt_ids,
 	},
 	.probe		= ds1803_probe,
 	.id_table	= ds1803_id,
Signature · 1 line
2.28.0
author maintainer
#3 lore raw

PATCH 3/38 iio:potentiometer:max5432: Drop of_match_ptr and use generic fw accessors

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevent use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Drop them to remove this restriction.

Also switch headers to reflect this change.

---
 drivers/iio/potentiometer/max5432.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/potentiometer/max5432.c +4 -4
index 280de9c54471..aed3b6ab82a2 100644
@@ -11,8 +11,8 @@
 #include <linux/iio/iio.h>
 #include <linux/limits.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 
 /* All chip variants have 32 wiper positions. */
 #define MAX5432_MAX_POS 31
@@ -100,7 +100,7 @@ static int max5432_probe(struct i2c_client *client,
 
 	data = iio_priv(indio_dev);
 	data->client = client;
-	data->ohm = (unsigned long)of_device_get_match_data(dev);
+	data->ohm = (unsigned long)device_get_match_data(dev);
 
 	indio_dev->info = &max5432_info;
 	indio_dev->channels = max5432_channels;
@@ -122,7 +122,7 @@ MODULE_DEVICE_TABLE(of, max5432_dt_ids);
 static struct i2c_driver max5432_driver = {
 	.driver = {
 		.name = "max5432",
-		.of_match_table = of_match_ptr(max5432_dt_ids),
+		.of_match_table = max5432_dt_ids,
 	},
 	.probe = max5432_probe,
 };
Signature · 1 line
2.28.0
Reviewed-by on v1 3/38
#4 lore raw

Re: [PATCH 03/38] iio:potentiometer:max5432: Drop of_match_ptr and use generic fw accessors

Thus wrote Jonathan Cameron ([email protected]):

Quoted 49 lines

From: Jonathan Cameron <[email protected]>

These prevent use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Drop them to remove this restriction.

Also switch headers to reflect this change.

---
 drivers/iio/potentiometer/max5432.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/potentiometer/max5432.c +4 -4
index 280de9c54471..aed3b6ab82a2 100644
@@ -11,8 +11,8 @@
 #include <linux/iio/iio.h>
 #include <linux/limits.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 
 /* All chip variants have 32 wiper positions. */
 #define MAX5432_MAX_POS 31
@@ -100,7 +100,7 @@ static int max5432_probe(struct i2c_client *client,
 
 	data = iio_priv(indio_dev);
 	data->client = client;
-	data->ohm = (unsigned long)of_device_get_match_data(dev);
+	data->ohm = (unsigned long)device_get_match_data(dev);
 
 	indio_dev->info = &max5432_info;
 	indio_dev->channels = max5432_channels;
@@ -122,7 +122,7 @@ MODULE_DEVICE_TABLE(of, max5432_dt_ids);
 static struct i2c_driver max5432_driver = {
 	.driver = {
 		.name = "max5432",
-		.of_match_table = of_match_ptr(max5432_dt_ids),
+		.of_match_table = max5432_dt_ids,
 	},
 	.probe = max5432_probe,
 };
Signature · 1 line
2.28.0

Looks good to me.

author maintainer
#5 lore raw

PATCH 4/38 iio:potentiometer:max5481: Drop of_match_ptr and CONFIG_OF protections.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevent use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Whilst this driver has an ACPI binding, it is not of a form that is valid under ACPI so will be dropped shortly.

Also switch to device_get_match_data() and switch headers.

Cc Maury Anderson <[email protected]>
Cc Matthew Weber <[email protected]>
Cc Slawomir Stepien <[email protected]>
---
 drivers/iio/potentiometer/max5481.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/iio/potentiometer/max5481.c +4 -6
index 5f5988189796..6d1e1a57cba1 100644
@@ -11,8 +11,8 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 #include <linux/spi/spi.h>
 
 /* write wiper reg */
@@ -117,7 +117,6 @@ static const struct iio_info max5481_info = {
 	.write_raw = max5481_write_raw,
 };
 
-#if defined(CONFIG_OF)
 static const struct of_device_id max5481_match[] = {
 	{ .compatible = "maxim,max5481", .data = &max5481_cfg[max5481] },
 	{ .compatible = "maxim,max5482", .data = &max5481_cfg[max5482] },
@@ -126,7 +125,6 @@ static const struct of_device_id max5481_match[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(of, max5481_match);
-#endif
 
 static int max5481_probe(struct spi_device *spi)
 {
@@ -144,7 +142,7 @@ static int max5481_probe(struct spi_device *spi)
 
 	data->spi = spi;
 
-	data->cfg = of_device_get_match_data(&spi->dev);
+	data->cfg = device_get_match_data(&spi->dev);
 	if (!data->cfg)
 		data->cfg = &max5481_cfg[id->driver_data];
 
@@ -198,7 +196,7 @@ MODULE_DEVICE_TABLE(acpi, max5481_acpi_match);
 static struct spi_driver max5481_driver = {
 	.driver = {
 		.name  = "max5481",
-		.of_match_table = of_match_ptr(max5481_match),
+		.of_match_table = max5481_match,
 		.acpi_match_table = ACPI_PTR(max5481_acpi_match),
 	},
 	.probe = max5481_probe,
Signature · 1 line
2.28.0
author maintainer
#6 lore raw

PATCH 5/38 iio:potentiometer:max5481: Drop invalid ACPI binding.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Given that an ACPI binding must start with 3 or 4 capitals, this cannot represent a valid binding.

It seems unlikely anything out there is using it.

Cc Maury Anderson <[email protected]>
Cc Matthew Weber <[email protected]>
Cc Slawomir Stepien <[email protected]>
---
 drivers/iio/potentiometer/max5481.c | 13 -------------
 1 file changed, 13 deletions(-)
drivers/iio/potentiometer/max5481.c +0 -13
index 6d1e1a57cba1..a88ed0eb3adc 100644
@@ -7,7 +7,6 @@
  * https://datasheets.maximintegrated.com/en/ds/MAX5481-MAX5484.pdf
  */
 
-#include <linux/acpi.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/module.h>
@@ -182,22 +181,10 @@ static const struct spi_device_id max5481_id_table[] = {
 };
 MODULE_DEVICE_TABLE(spi, max5481_id_table);
 
-#if defined(CONFIG_ACPI)
-static const struct acpi_device_id max5481_acpi_match[] = {
-	{ "max5481", max5481 },
-	{ "max5482", max5482 },
-	{ "max5483", max5483 },
-	{ "max5484", max5484 },
-	{ }
-};
-MODULE_DEVICE_TABLE(acpi, max5481_acpi_match);
-#endif
-
 static struct spi_driver max5481_driver = {
 	.driver = {
 		.name  = "max5481",
 		.of_match_table = max5481_match,
-		.acpi_match_table = ACPI_PTR(max5481_acpi_match),
 	},
 	.probe = max5481_probe,
 	.remove = max5481_remove,
Signature · 1 line
2.28.0
#7 lore raw

Re: [PATCH 05/38] iio:potentiometer:max5481: Drop invalid ACPI binding.

Quoted 7 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Given that an ACPI binding must start with 3 or 4 capitals, this cannot represent a valid binding.

It seems unlikely anything out there is using it.

Totally agree.
The names are dictated by the ACPI specification and don't mention small letters.

Quoted 46 lines
Cc Maury Anderson <[email protected]>
Cc Matthew Weber <[email protected]>
Cc Slawomir Stepien <[email protected]>
---
 drivers/iio/potentiometer/max5481.c | 13 -------------
 1 file changed, 13 deletions(-)
drivers/iio/potentiometer/max5481.c +0 -14
index 6d1e1a57cba1..a88ed0eb3adc 100644
@@ -7,7 +7,6 @@
  * https://datasheets.maximintegrated.com/en/ds/MAX5481-MAX5484.pdf
  */
 
-#include <linux/acpi.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 #include <linux/module.h>
@@ -182,22 +181,10 @@ static const struct spi_device_id max5481_id_table[] = {
 };
 MODULE_DEVICE_TABLE(spi, max5481_id_table);
 
-#if defined(CONFIG_ACPI)
-static const struct acpi_device_id max5481_acpi_match[] = {
-       { "max5481", max5481 },
-       { "max5482", max5482 },
-       { "max5483", max5483 },
-       { "max5484", max5484 },
-       { }
-};
-MODULE_DEVICE_TABLE(acpi, max5481_acpi_match);
-#endif
-
 static struct spi_driver max5481_driver = {
        .driver = {
                .name  = "max5481",
                .of_match_table = max5481_match,
-               .acpi_match_table = ACPI_PTR(max5481_acpi_match),
        },
        .probe = max5481_probe,
        .remove = max5481_remove,
--

2.28.0

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#8 lore raw

PATCH 6/38 iio:potentiometer:mcp4018: Drop of_match_ptr and CONFIG_OF protections.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevent use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Also use device_get_match_data() rather than devicetree only version.

---
 drivers/iio/potentiometer/mcp4018.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/iio/potentiometer/mcp4018.c +4 -8
index fd0579ad3c83..c0e171fec062 100644
@@ -16,8 +16,8 @@
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 
 #define MCP4018_WIPER_MAX 127
 
@@ -116,8 +116,6 @@ static const struct i2c_device_id mcp4018_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, mcp4018_id);
 
-#ifdef CONFIG_OF
-
 #define MCP4018_COMPATIBLE(of_compatible, cfg) {	\
 	.compatible = of_compatible,			\
 	.data = &mcp4018_cfg[cfg],			\
@@ -140,8 +138,6 @@ static const struct of_device_id mcp4018_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mcp4018_of_match);
 
-#endif
-
 static int mcp4018_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
@@ -161,7 +157,7 @@ static int mcp4018_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
 
-	data->cfg = of_device_get_match_data(dev);
+	data->cfg = device_get_match_data(dev);
 	if (!data->cfg)
 		data->cfg = &mcp4018_cfg[i2c_match_id(mcp4018_id, client)->driver_data];
 
@@ -176,7 +172,7 @@ static int mcp4018_probe(struct i2c_client *client)
 static struct i2c_driver mcp4018_driver = {
 	.driver = {
 		.name	= "mcp4018",
-		.of_match_table = of_match_ptr(mcp4018_of_match),
+		.of_match_table = mcp4018_of_match,
 	},
 	.probe_new	= mcp4018_probe,
 	.id_table	= mcp4018_id,
Signature · 1 line
2.28.0
author maintainer
#9 lore raw

PATCH 7/38 iio:potentiometer:mcp4131: Drop of_match_ptr and use generic fw interfaces.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This change allows the use of the driver with ACPI via PRP0001 and remove an example of an anti pattern I'm trying to remove from IIO. Also adjust includes to reflect this change.

---
 drivers/iio/potentiometer/mcp4131.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/potentiometer/mcp4131.c +4 -4
index 2923ce250fc3..7c8c18ab8764 100644
@@ -37,9 +37,9 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/types.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/property.h>
 #include <linux/spi/spi.h>
 
 #define MCP4131_WRITE		(0x00 << 2)
@@ -252,7 +252,7 @@ static int mcp4131_probe(struct spi_device *spi)
 	data = iio_priv(indio_dev);
 	spi_set_drvdata(spi, indio_dev);
 	data->spi = spi;
-	data->cfg = of_device_get_match_data(&spi->dev);
+	data->cfg = device_get_match_data(&spi->dev);
 	if (!data->cfg) {
 		devid = spi_get_device_id(spi)->driver_data;
 		data->cfg = &mcp4131_cfg[devid];
@@ -479,7 +479,7 @@ MODULE_DEVICE_TABLE(spi, mcp4131_id);
 static struct spi_driver mcp4131_driver = {
 	.driver = {
 		.name	= "mcp4131",
-		.of_match_table = of_match_ptr(mcp4131_dt_ids),
+		.of_match_table = mcp4131_dt_ids,
 	},
 	.probe		= mcp4131_probe,
 	.id_table	= mcp4131_id,
Signature · 1 line
2.28.0
author maintainer
#10 lore raw

PATCH 8/38 iio:potentiometer:mcp4531: Drop of_match_ptr and CONFIG_OF protections.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevent use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Hence drop them from this driver.

Also switch to device_get_match_data() from of_ variant and adjust headers to reflect the change.

---
 drivers/iio/potentiometer/mcp4531.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/iio/potentiometer/mcp4531.c +4 -7
index 95efc4b40514..c25f84b4a270 100644
@@ -28,8 +28,8 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 
 #include <linux/iio/iio.h>
 
@@ -275,8 +275,6 @@ static const struct i2c_device_id mcp4531_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, mcp4531_id);
 
-#ifdef CONFIG_OF
-
 #define MCP4531_COMPATIBLE(of_compatible, cfg) {	\
 			.compatible = of_compatible,	\
 			.data = &mcp4531_cfg[cfg],	\
@@ -350,7 +348,6 @@ static const struct of_device_id mcp4531_of_match[] = {
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mcp4531_of_match);
-#endif
 
 static int mcp4531_probe(struct i2c_client *client)
 {
@@ -371,7 +368,7 @@ static int mcp4531_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
 
-	data->cfg = of_device_get_match_data(dev);
+	data->cfg = device_get_match_data(dev);
 	if (!data->cfg)
 		data->cfg = &mcp4531_cfg[i2c_match_id(mcp4531_id, client)->driver_data];
 
@@ -386,7 +383,7 @@ static int mcp4531_probe(struct i2c_client *client)
 static struct i2c_driver mcp4531_driver = {
 	.driver = {
 		.name	= "mcp4531",
-		.of_match_table = of_match_ptr(mcp4531_of_match),
+		.of_match_table = mcp4531_of_match,
 	},
 	.probe_new	= mcp4531_probe,
 	.id_table	= mcp4531_id,
Signature · 1 line
2.28.0
author maintainer
#11 lore raw

PATCH 9/38 iio:dac:ad5446: Drop of_match_ptr and CONFIG_OF protections

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevent use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Hence drop them from this driver.

Cc Michael Hennerich <[email protected]>
---
 drivers/iio/dac/ad5446.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/iio/dac/ad5446.c +2 -3
index 935a6177569f..d87e21016863 100644
@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -478,13 +479,11 @@ static const struct spi_device_id ad5446_spi_ids[] = {
 };
 MODULE_DEVICE_TABLE(spi, ad5446_spi_ids);
 
-#ifdef CONFIG_OF
 static const struct of_device_id ad5446_of_ids[] = {
 	{ .compatible = "ti,dac7512" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ad5446_of_ids);
-#endif
 
 static int ad5446_spi_probe(struct spi_device *spi)
 {
@@ -502,7 +501,7 @@ static int ad5446_spi_remove(struct spi_device *spi)
 static struct spi_driver ad5446_spi_driver = {
 	.driver = {
 		.name	= "ad5446",
-		.of_match_table = of_match_ptr(ad5446_of_ids),
+		.of_match_table = ad5446_of_ids,
 	},
 	.probe		= ad5446_spi_probe,
 	.remove		= ad5446_spi_remove,
Signature · 1 line
2.28.0
author maintainer
#12 lore raw

PATCH 10/38 iio:dac:ad5592r: Drop of_match_ptr and ACPI_PTR protections.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These result in a very small reduction in driver size, but at the cost of more complex build and slightly harder to read code. In the case of of_match_ptr it also prevents use of PRP0001 ACPI based identification. In this particular case we have a valid ACPI/PNP ID that I am assuming was issued by Analog Devices. That should be used in preference to PRP0001 but doesn't mean we should prevent that route.

Cc Michael Hennerich <[email protected]>
Cc Lars-Peter Clausen <[email protected]>
---
 drivers/iio/dac/ad5592r.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/iio/dac/ad5592r.c +3 -4
index 49308ad13c4b..41f651500668 100644
@@ -10,9 +10,8 @@
 
 #include <linux/bitops.h>
 #include <linux/module.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
-#include <linux/acpi.h>
 
 #define AD5592R_GPIO_READBACK_EN	BIT(10)
 #define AD5592R_LDAC_READBACK_EN	BIT(6)
@@ -157,8 +156,8 @@ MODULE_DEVICE_TABLE(acpi, ad5592r_acpi_match);
 static struct spi_driver ad5592r_spi_driver = {
 	.driver = {
 		.name = "ad5592r",
-		.of_match_table = of_match_ptr(ad5592r_of_match),
-		.acpi_match_table = ACPI_PTR(ad5592r_acpi_match),
+		.of_match_table = ad5592r_of_match,
+		.acpi_match_table = ad5592r_acpi_match,
 	},
 	.probe = ad5592r_spi_probe,
 	.remove = ad5592r_spi_remove,
Signature · 1 line
2.28.0
author maintainer
#13 lore raw

PATCH 11/38 iio:dac:ad5593r: Drop of_match_ptr and ACPI_PTR protections.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These result in a very small reduction in driver size, but at the cost of more complex build and slightly harder to read code. In the case of of_match_ptr it also prevents use of PRP0001 ACPI based identification. In this particular case we have a valid ACPI/PNP ID that I am assuming was issued by Analog Devices. That should be used in preference to PRP0001 but doesn't mean we should prevent that route.

Cc Michael Hennerich <[email protected]>
Cc Lars-Peter Clausen <[email protected]>
---
 drivers/iio/dac/ad5593r.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/iio/dac/ad5593r.c +3 -4
index 1fbe9c019c7f..5b4df36fdc2a 100644
@@ -11,8 +11,7 @@
 #include <linux/bitops.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
-#include <linux/of.h>
-#include <linux/acpi.h>
+#include <linux/mod_devicetable.h>
 
 #define AD5593R_MODE_CONF		(0 << 4)
 #define AD5593R_MODE_DAC_WRITE		(1 << 4)
@@ -124,8 +123,8 @@ MODULE_DEVICE_TABLE(acpi, ad5593r_acpi_match);
 static struct i2c_driver ad5593r_driver = {
 	.driver = {
 		.name = "ad5593r",
-		.of_match_table = of_match_ptr(ad5593r_of_match),
-		.acpi_match_table = ACPI_PTR(ad5593r_acpi_match),
+		.of_match_table = ad5593r_of_match,
+		.acpi_match_table = ad5593r_acpi_match,
 	},
 	.probe = ad5593r_i2c_probe,
 	.remove = ad5593r_i2c_remove,
Signature · 1 line
2.28.0
author maintainer
#14 lore raw

PATCH 12/38 iio:dac:ad7303: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO.

Also add mod_devicetable.h include given struct of_device_id is declared there.

Cc Michael Hennerich <[email protected]>
Cc Lars-Peter Clausen <[email protected]>
---
 drivers/iio/dac/ad7303.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/dac/ad7303.c +2 -1
index 4460aa57a33f..20c85c2a636c 100644
@@ -7,6 +7,7 @@
 
 #include <linux/err.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/kernel.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
@@ -287,7 +288,7 @@ MODULE_DEVICE_TABLE(spi, ad7303_spi_ids);
 static struct spi_driver ad7303_driver = {
 	.driver = {
 		.name = "ad7303",
-		.of_match_table = of_match_ptr(ad7303_spi_of_match),
+		.of_match_table = ad7303_spi_of_match,
 	},
 	.probe = ad7303_probe,
 	.remove = ad7303_remove,
Signature · 1 line
2.28.0
author maintainer
#15 lore raw

PATCH 13/38 iio:dac:mcp4725: drop of_match_ptr and use generic fw properties

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This enables use of ACPI PRP0001 and removes an antipattern I am trying to stop people copying in IIO.

This particular case is more complex than most because it allowed probing via sysfs with out a fwnode but would presumably always
have then failed. Now the code will assume that properties are
the defaults if not specified or the firmware node is not present. This relaxation of the constraints should not break any existing cases and may enable some new ones.

---
 drivers/iio/dac/mcp4725.c | 29 +++++++----------------------
 1 file changed, 7 insertions(+), 22 deletions(-)
drivers/iio/dac/mcp4725.c +7 -22
index ee174d224110..beb9a15b7c74 100644
@@ -16,8 +16,8 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
-#include <linux/of_device.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <linux/property.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -357,29 +357,16 @@ static const struct iio_info mcp4725_info = {
 	.attrs = &mcp4725_attribute_group,
 };
 
-#ifdef CONFIG_OF
 static int mcp4725_probe_dt(struct device *dev,
 			    struct mcp4725_platform_data *pdata)
 {
-	struct device_node *np = dev->of_node;
-
-	if (!np)
-		return -ENODEV;
-
 	/* check if is the vref-supply defined */
-	pdata->use_vref = of_property_read_bool(np, "vref-supply");
+	pdata->use_vref = device_property_read_bool(dev, "vref-supply");
 	pdata->vref_buffered =
-		of_property_read_bool(np, "microchip,vref-buffered");
+		device_property_read_bool(dev, "microchip,vref-buffered");
 
 	return 0;
 }
-#else
-static int mcp4725_probe_dt(struct device *dev,
-			    struct mcp4725_platform_data *platform_data)
-{
-	return -ENODEV;
-}
-#endif
 
 static int mcp4725_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
@@ -398,8 +385,8 @@ static int mcp4725_probe(struct i2c_client *client,
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
-	if (client->dev.of_node)
-		data->id = (enum chip_id)of_device_get_match_data(&client->dev);
+	if (dev_fwnode(&client->dev))
+		data->id = (enum chip_id)device_get_match_data(&client->dev);
 	else
 		data->id = id->driver_data;
 	pdata = dev_get_platdata(&client->dev);
@@ -519,7 +506,6 @@ static const struct i2c_device_id mcp4725_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, mcp4725_id);
 
-#ifdef CONFIG_OF
 static const struct of_device_id mcp4725_of_match[] = {
 	{
 		.compatible = "microchip,mcp4725",
@@ -532,12 +518,11 @@ static const struct of_device_id mcp4725_of_match[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mcp4725_of_match);
-#endif
 
 static struct i2c_driver mcp4725_driver = {
 	.driver = {
 		.name	= MCP4725_DRV_NAME,
-		.of_match_table = of_match_ptr(mcp4725_of_match),
+		.of_match_table = mcp4725_of_match,
 		.pm	= &mcp4725_pm_ops,
 	},
 	.probe		= mcp4725_probe,
Signature · 1 line
2.28.0
author maintainer
#16 lore raw

PATCH 14/38 iio:dac:ti-dac082s085: Drop of_match_ptr and CONFIG_OF protections

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevent the use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Hence drop them from this driver.

---
 drivers/iio/dac/ti-dac082s085.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/iio/dac/ti-dac082s085.c +2 -3
index 86bfb1c3f9b9..de33c1fc6e0b 100644
@@ -14,6 +14,7 @@
 
 #include <linux/iio/iio.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spi/spi.h>
 
@@ -324,7 +325,6 @@ static int ti_dac_remove(struct spi_device *spi)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id ti_dac_of_id[] = {
 	{ .compatible = "ti,dac082s085" },
 	{ .compatible = "ti,dac102s085" },
@@ -335,7 +335,6 @@ static const struct of_device_id ti_dac_of_id[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ti_dac_of_id);
-#endif
 
 static const struct spi_device_id ti_dac_spi_id[] = {
 	{ "dac082s085", dual_8bit  },
@@ -351,7 +350,7 @@ MODULE_DEVICE_TABLE(spi, ti_dac_spi_id);
 static struct spi_driver ti_dac_driver = {
 	.driver = {
 		.name		= "ti-dac082s085",
-		.of_match_table	= of_match_ptr(ti_dac_of_id),
+		.of_match_table	= ti_dac_of_id,
 	},
 	.probe	  = ti_dac_probe,
 	.remove   = ti_dac_remove,
Signature · 1 line
2.28.0
author maintainer
#17 lore raw

PATCH 15/38 iio:dac:ti-dac5571: Drop of_match_ptr and CONFIG_OF protections

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevent the use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Hence drop them from this driver.

---
 drivers/iio/dac/ti-dac5571.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/iio/dac/ti-dac5571.c +2 -5
index d303b19814e7..d3295767a079 100644
@@ -18,8 +18,7 @@
 #include <linux/iio/iio.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/regulator/consumer.h>
 
 enum chip_id {
@@ -384,7 +383,6 @@ static int dac5571_remove(struct i2c_client *i2c)
 	return 0;
 }
 
-#ifdef CONFIG_OF
 static const struct of_device_id dac5571_of_id[] = {
 	{.compatible = "ti,dac5571"},
 	{.compatible = "ti,dac6571"},
@@ -398,7 +396,6 @@ static const struct of_device_id dac5571_of_id[] = {
 	{}
 };
 MODULE_DEVICE_TABLE(of, dac5571_of_id);
-#endif
 
 static const struct i2c_device_id dac5571_id[] = {
 	{"dac5571", single_8bit},
@@ -417,7 +414,7 @@ MODULE_DEVICE_TABLE(i2c, dac5571_id);
 static struct i2c_driver dac5571_driver = {
 	.driver = {
 		   .name = "ti-dac5571",
-		   .of_match_table = of_match_ptr(dac5571_of_id),
+		   .of_match_table = dac5571_of_id,
 	},
 	.probe	  = dac5571_probe,
 	.remove   = dac5571_remove,
Signature · 1 line
2.28.0
author maintainer
#18 lore raw

PATCH 16/38 iio:potentiostat:lmp91000: Drop of_match_ptr and use generic fw accessors

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This change allows use of this driver with ACPI via PRP0001 and removes an example of an anti pattern I'm trying to remove from IIO.

---
 drivers/iio/potentiostat/lmp91000.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/iio/potentiostat/lmp91000.c +5 -6
index 67ae635a05f3..f34ca769dc20 100644
@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -205,13 +205,12 @@ static const struct iio_info lmp91000_info = {
 static int lmp91000_read_config(struct lmp91000_data *data)
 {
 	struct device *dev = data->dev;
-	struct device_node *np = dev->of_node;
 	unsigned int reg, val;
 	int i, ret;
 
-	ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val);
+	ret = device_property_read_u32(dev, "ti,tia-gain-ohm", &val);
 	if (ret) {
-		if (!of_property_read_bool(np, "ti,external-tia-resistor")) {
+		if (!device_property_read_bool(dev, "ti,external-tia-resistor")) {
 			dev_err(dev, "no ti,tia-gain-ohm defined and external resistor not specified\n");
 			return ret;
 		}
@@ -232,7 +231,7 @@ static int lmp91000_read_config(struct lmp91000_data *data)
 		return ret;
 	}
 
-	ret = of_property_read_u32(np, "ti,rload-ohm", &val);
+	ret = device_property_read_u32(dev, "ti,rload-ohm", &val);
 	if (ret) {
 		val = 100;
 		dev_info(dev, "no ti,rload-ohm defined, default to %d\n", val);
@@ -422,7 +421,7 @@ MODULE_DEVICE_TABLE(i2c, lmp91000_id);
 static struct i2c_driver lmp91000_driver = {
 	.driver = {
 		.name = LMP91000_DRV_NAME,
-		.of_match_table = of_match_ptr(lmp91000_of_match),
+		.of_match_table = lmp91000_of_match,
 	},
 	.probe = lmp91000_probe,
 	.remove = lmp91000_remove,
Signature · 1 line
2.28.0
Acked-by on v1 16/38
#19 lore raw

Re: [PATCH 16/38] iio:potentiostat:lmp91000: Drop of_match_ptr and use generic fw accessors

Quoted 8 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This change allows use of this driver with ACPI via PRP0001 and removes an example of an anti pattern I'm trying to remove from IIO.

Quoted 54 lines
---
 drivers/iio/potentiostat/lmp91000.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/iio/potentiostat/lmp91000.c +5 -7
index 67ae635a05f3..f34ca769dc20 100644
@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -205,13 +205,12 @@ static const struct iio_info lmp91000_info = {
 static int lmp91000_read_config(struct lmp91000_data *data)
 {
        struct device *dev = data->dev;
-       struct device_node *np = dev->of_node;
        unsigned int reg, val;
        int i, ret;
 
-       ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val);
+       ret = device_property_read_u32(dev, "ti,tia-gain-ohm", &val);
        if (ret) {
-               if (!of_property_read_bool(np, "ti,external-tia-resistor")) {
+               if (!device_property_read_bool(dev, "ti,external-tia-resistor")) {
                        dev_err(dev, "no ti,tia-gain-ohm defined and external resistor not specified\n");
                        return ret;
                }
@@ -232,7 +231,7 @@ static int lmp91000_read_config(struct lmp91000_data *data)
                return ret;
        }
 
-       ret = of_property_read_u32(np, "ti,rload-ohm", &val);
+       ret = device_property_read_u32(dev, "ti,rload-ohm", &val);
        if (ret) {
                val = 100;
                dev_info(dev, "no ti,rload-ohm defined, default to %d\n", val);
@@ -422,7 +421,7 @@ MODULE_DEVICE_TABLE(i2c, lmp91000_id);
 static struct i2c_driver lmp91000_driver = {
        .driver = {
                .name = LMP91000_DRV_NAME,
-               .of_match_table = of_match_ptr(lmp91000_of_match),
+               .of_match_table = lmp91000_of_match,
        },
        .probe = lmp91000_probe,
        .remove = lmp91000_remove,
--

2.28.0

author maintainer
#20 lore raw

PATCH 17/38 iio:pressure:icp10100: Drop of_match_ptr and CONFIG_OF protections

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevents use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Hence drop them from this driver.

Cc Jean-Baptiste Maneyrol <[email protected]>
---
 drivers/iio/pressure/icp10100.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/pressure/icp10100.c +2 -1
index 90c0df068bbb..48759fc4bf18 100644
@@ -10,6 +10,7 @@
 
 #include <linux/device.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/i2c.h>
 #include <linux/pm_runtime.h>
 #include <linux/crc8.h>
@@ -645,7 +646,7 @@ static struct i2c_driver icp10100_driver = {
 	.driver = {
 		.name = "icp10100",
 		.pm = &icp10100_pm,
-		.of_match_table = of_match_ptr(icp10100_of_match),
+		.of_match_table = icp10100_of_match,
 	},
 	.probe = icp10100_probe,
 	.id_table = icp10100_id,
Signature · 1 line
2.28.0
author maintainer
#21 lore raw

PATCH 18/38 iio:pressure:ms5611: Drop of_match_ptr and CONFIG_OF protections

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

These prevents use of this driver with ACPI via PRP0001 and are an example of an anti pattern I'm trying to remove from IIO. Hence drop them from this driver.

---
 drivers/iio/pressure/ms5611_i2c.c | 6 ++----
 drivers/iio/pressure/ms5611_spi.c | 6 ++----
 2 files changed, 4 insertions(+), 8 deletions(-)
drivers/iio/pressure/ms5611_i2c.c +2 -4
index 072c106dd66d..7c04f730430c 100644
@@ -14,7 +14,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 
 #include <asm/unaligned.h>
 
@@ -113,14 +113,12 @@ static int ms5611_i2c_remove(struct i2c_client *client)
 	return ms5611_remove(i2c_get_clientdata(client));
 }
 
-#if defined(CONFIG_OF)
 static const struct of_device_id ms5611_i2c_matches[] = {
 	{ .compatible = "meas,ms5611" },
 	{ .compatible = "meas,ms5607" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ms5611_i2c_matches);
-#endif
 
 static const struct i2c_device_id ms5611_id[] = {
 	{ "ms5611", MS5611 },
@@ -132,7 +130,7 @@ MODULE_DEVICE_TABLE(i2c, ms5611_id);
 static struct i2c_driver ms5611_driver = {
 	.driver = {
 		.name = "ms5611",
-		.of_match_table = of_match_ptr(ms5611_i2c_matches)
+		.of_match_table = ms5611_i2c_matches,
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_i2c_probe,
drivers/iio/pressure/ms5611_spi.c +2 -4
index 4799aa57135e..45d3a7d5be8e 100644
@@ -9,7 +9,7 @@
 #include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/spi/spi.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 
 #include <asm/unaligned.h>
 
@@ -115,14 +115,12 @@ static int ms5611_spi_remove(struct spi_device *spi)
 	return ms5611_remove(spi_get_drvdata(spi));
 }
 
-#if defined(CONFIG_OF)
 static const struct of_device_id ms5611_spi_matches[] = {
 	{ .compatible = "meas,ms5611" },
 	{ .compatible = "meas,ms5607" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, ms5611_spi_matches);
-#endif
 
 static const struct spi_device_id ms5611_id[] = {
 	{ "ms5611", MS5611 },
@@ -134,7 +132,7 @@ MODULE_DEVICE_TABLE(spi, ms5611_id);
 static struct spi_driver ms5611_driver = {
 	.driver = {
 		.name = "ms5611",
-		.of_match_table = of_match_ptr(ms5611_spi_matches)
+		.of_match_table = ms5611_spi_matches
 	},
 	.id_table = ms5611_id,
 	.probe = ms5611_spi_probe,
Signature · 1 line
2.28.0
author maintainer
#22 lore raw

PATCH 19/38 iio:pressure:ms5637: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/pressure/ms5637.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/pressure/ms5637.c +2 -1
index 05e0ef7260d5..5b59a4137d32 100644
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/stat.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -192,7 +193,7 @@ static struct i2c_driver ms5637_driver = {
 	.id_table = ms5637_id,
 	.driver = {
 		   .name = "ms5637",
-		   .of_match_table = of_match_ptr(ms5637_of_match),
+		   .of_match_table = ms5637_of_match,
 		   },
 };
 
Signature · 1 line
2.28.0
author maintainer
#23 lore raw

PATCH 20/38 iio:pressure:zpa2326: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/pressure/zpa2326_i2c.c | 6 ++----
 drivers/iio/pressure/zpa2326_spi.c | 6 ++----
 2 files changed, 4 insertions(+), 8 deletions(-)
drivers/iio/pressure/zpa2326_i2c.c +2 -4
index 1a65791ba279..95d9739444c4 100644
@@ -10,7 +10,7 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/i2c.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include "zpa2326.h"
 
 /*
@@ -66,18 +66,16 @@ static const struct i2c_device_id zpa2326_i2c_ids[] = {
 };
 MODULE_DEVICE_TABLE(i2c, zpa2326_i2c_ids);
 
-#if defined(CONFIG_OF)
 static const struct of_device_id zpa2326_i2c_matches[] = {
 	{ .compatible = "murata,zpa2326" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, zpa2326_i2c_matches);
-#endif
 
 static struct i2c_driver zpa2326_i2c_driver = {
 	.driver = {
 		.name           = "zpa2326-i2c",
-		.of_match_table = of_match_ptr(zpa2326_i2c_matches),
+		.of_match_table = zpa2326_i2c_matches,
 		.pm             = ZPA2326_PM_OPS,
 	},
 	.probe    = zpa2326_probe_i2c,
drivers/iio/pressure/zpa2326_spi.c +2 -4
index f37a4c738c75..85201a4bae44 100644
@@ -10,7 +10,7 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/spi/spi.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include "zpa2326.h"
 
 /*
@@ -70,18 +70,16 @@ static const struct spi_device_id zpa2326_spi_ids[] = {
 };
 MODULE_DEVICE_TABLE(spi, zpa2326_spi_ids);
 
-#if defined(CONFIG_OF)
 static const struct of_device_id zpa2326_spi_matches[] = {
 	{ .compatible = "murata,zpa2326" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, zpa2326_spi_matches);
-#endif
 
 static struct spi_driver zpa2326_spi_driver = {
 	.driver = {
 		.name           = "zpa2326-spi",
-		.of_match_table = of_match_ptr(zpa2326_spi_matches),
+		.of_match_table = zpa2326_spi_matches,
 		.pm             = ZPA2326_PM_OPS,
 	},
 	.probe    = zpa2326_probe_spi,
Signature · 1 line
2.28.0
author maintainer
#24 lore raw

PATCH 21/38 iio:temperature:tsys01: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/temperature/tsys01.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/temperature/tsys01.c +2 -1
index 2c631a1ca33b..bbfbad9a8767 100644
@@ -13,6 +13,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/stat.h>
@@ -222,7 +223,7 @@ static struct i2c_driver tsys01_driver = {
 	.id_table = tsys01_id,
 	.driver = {
 		   .name = "tsys01",
-		   .of_match_table = of_match_ptr(tsys01_of_match),
+		   .of_match_table = tsys01_of_match,
 		   },
 };
 
Signature · 1 line
2.28.0
author maintainer
#25 lore raw

PATCH 22/38 iio:temperature:tmp007: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

Cc Manivannan Sadhasivam <[email protected]>
---
 drivers/iio/temperature/tmp007.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/iio/temperature/tmp007.c +2 -2
index f90fe9e5617b..ad2b35c65548 100644
@@ -20,7 +20,7 @@
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/bitops.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
@@ -578,7 +578,7 @@ MODULE_DEVICE_TABLE(i2c, tmp007_id);
 static struct i2c_driver tmp007_driver = {
 	.driver = {
 		.name	= "tmp007",
-		.of_match_table = of_match_ptr(tmp007_of_match),
+		.of_match_table = tmp007_of_match,
 		.pm	= &tmp007_pm_ops,
 	},
 	.probe		= tmp007_probe,
Signature · 1 line
2.28.0
author maintainer
#26 lore raw

PATCH 23/38 iio:resolver:ad2s1200: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/resolver/ad2s1200.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/resolver/ad2s1200.c +2 -1
index 6007abad116b..9746bd935628 100644
@@ -12,6 +12,7 @@
 #include <linux/device.h>
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/mutex.h>
 #include <linux/spi/spi.h>
 #include <linux/sysfs.h>
@@ -192,7 +193,7 @@ MODULE_DEVICE_TABLE(spi, ad2s1200_id);
 static struct spi_driver ad2s1200_driver = {
 	.driver = {
 		.name = DRV_NAME,
-		.of_match_table = of_match_ptr(ad2s1200_of_match),
+		.of_match_table = ad2s1200_of_match,
 	},
 	.probe = ad2s1200_probe,
 	.id_table = ad2s1200_id,
Signature · 1 line
2.28.0
author maintainer
#27 lore raw

PATCH 24/38 iio:chemical:ams-iaq-core: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/chemical/ams-iaq-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/chemical/ams-iaq-core.c +2 -1
index 8c1b64fd424a..97be3669c554 100644
@@ -7,6 +7,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/mutex.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
@@ -177,7 +178,7 @@ MODULE_DEVICE_TABLE(of, ams_iaqcore_dt_ids);
 static struct i2c_driver ams_iaqcore_driver = {
 	.driver = {
 		.name	= "ams-iaq-core",
-		.of_match_table = of_match_ptr(ams_iaqcore_dt_ids),
+		.of_match_table = ams_iaqcore_dt_ids,
 	},
 	.probe = ams_iaqcore_probe,
 	.id_table = ams_iaqcore_id,
Signature · 1 line
2.28.0
Acked-by on v1 24/38
#28 lore raw

Re: [PATCH 24/38] iio:chemical:ams-iaq-core: Drop of_match_ptr protection

Quoted 9 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

Quoted 28 lines
---
 drivers/iio/chemical/ams-iaq-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/chemical/ams-iaq-core.c +2 -2
index 8c1b64fd424a..97be3669c554 100644
@@ -7,6 +7,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/mutex.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
@@ -177,7 +178,7 @@ MODULE_DEVICE_TABLE(of, ams_iaqcore_dt_ids);
 static struct i2c_driver ams_iaqcore_driver = {
        .driver = {
                .name   = "ams-iaq-core",
-               .of_match_table = of_match_ptr(ams_iaqcore_dt_ids),
+               .of_match_table = ams_iaqcore_dt_ids,
        },
        .probe = ams_iaqcore_probe,
        .id_table = ams_iaqcore_id,
--

2.28.0

author maintainer
#29 lore raw

PATCH 25/38 iio:chemical:atlas-sensor: Drop of_match_ptr and use generic fw accessors

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

of_match_ptr() prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver and use generic fw accessors to check if there is a fw_node and get the id.

It might be neater to use pointers rather than indexes for the device_data but that is another issue and should be handled separately.

---
 drivers/iio/chemical/atlas-sensor.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/iio/chemical/atlas-sensor.c +4 -6
index 43069636fcd5..cdab9d04dedd 100644
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <linux/irq_work.h>
 #include <linux/i2c.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -620,7 +620,6 @@ static int atlas_probe(struct i2c_client *client,
 {
 	struct atlas_data *data;
 	struct atlas_device *chip;
-	const struct of_device_id *of_id;
 	struct iio_trigger *trig;
 	struct iio_dev *indio_dev;
 	int ret;
@@ -629,11 +628,10 @@ static int atlas_probe(struct i2c_client *client,
 	if (!indio_dev)
 		return -ENOMEM;
 
-	of_id = of_match_device(atlas_dt_ids, &client->dev);
-	if (!of_id)
+	if (!dev_fwnode(&client->dev))
 		chip = &atlas_devices[id->driver_data];
 	else
-		chip = &atlas_devices[(unsigned long)of_id->data];
+		chip = &atlas_devices[(unsigned long)device_get_match_data(&client->dev)];
 
 	indio_dev->info = &atlas_info;
 	indio_dev->name = ATLAS_DRV_NAME;
@@ -775,7 +773,7 @@ static const struct dev_pm_ops atlas_pm_ops = {
 static struct i2c_driver atlas_driver = {
 	.driver = {
 		.name	= ATLAS_DRV_NAME,
-		.of_match_table	= of_match_ptr(atlas_dt_ids),
+		.of_match_table	= atlas_dt_ids,
 		.pm	= &atlas_pm_ops,
 	},
 	.probe		= atlas_probe,
Signature · 1 line
2.28.0
Acked-by on v1 25/38
#30 lore raw

Re: [PATCH 25/38] iio:chemical:atlas-sensor: Drop of_match_ptr and use generic fw accessors

Quoted 8 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

of_match_ptr() prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver and use generic fw accessors to check if there is a fw_node and get the id.

Quoted 6 lines

It might be neater to use pointers rather than indexes for the device_data but that is another issue and should be handled separately.

Quoted 51 lines
---
 drivers/iio/chemical/atlas-sensor.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/iio/chemical/atlas-sensor.c +4 -7
index 43069636fcd5..cdab9d04dedd 100644
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <linux/irq_work.h>
 #include <linux/i2c.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -620,7 +620,6 @@ static int atlas_probe(struct i2c_client *client,
 {
        struct atlas_data *data;
        struct atlas_device *chip;
-       const struct of_device_id *of_id;
        struct iio_trigger *trig;
        struct iio_dev *indio_dev;
        int ret;
@@ -629,11 +628,10 @@ static int atlas_probe(struct i2c_client *client,
        if (!indio_dev)
                return -ENOMEM;
 
-       of_id = of_match_device(atlas_dt_ids, &client->dev);
-       if (!of_id)
+       if (!dev_fwnode(&client->dev))
                chip = &atlas_devices[id->driver_data];
        else
-               chip = &atlas_devices[(unsigned long)of_id->data];
+               chip = &atlas_devices[(unsigned long)device_get_match_data(&client->dev)];
 
        indio_dev->info = &atlas_info;
        indio_dev->name = ATLAS_DRV_NAME;
@@ -775,7 +773,7 @@ static const struct dev_pm_ops atlas_pm_ops = {
 static struct i2c_driver atlas_driver = {
        .driver = {
                .name   = ATLAS_DRV_NAME,
-               .of_match_table = of_match_ptr(atlas_dt_ids),
+               .of_match_table = atlas_dt_ids,
                .pm     = &atlas_pm_ops,
        },
        .probe          = atlas_probe,
--

2.28.0

author maintainer
#31 lore raw

PATCH 26/38 iio:chemical:sgp30: Use local variable dev to simplify code

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This cleans up the code at bit, but is primarily here as a precusor to the next patch. I've only done this for the two functions which use the dev pointer repeatedly.

---
 drivers/iio/chemical/sgp30.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/iio/chemical/sgp30.c +10 -10
index 2c4086c48136..410565aa20b6 100644
@@ -409,6 +409,7 @@ static int sgp_read_raw(struct iio_dev *indio_dev,
 static int sgp_check_compat(struct sgp_data *data,
 			    unsigned int product_id)
 {
+	struct device *dev = &data->client->dev;
 	const struct sgp_version *supported_versions;
 	u16 ix, num_fs;
 	u16 product, generation, major, minor;
@@ -416,21 +417,20 @@ static int sgp_check_compat(struct sgp_data *data,
 	/* driver does not match product */
 	generation = SGP_VERS_GEN(data);
 	if (generation != 0) {
-		dev_err(&data->client->dev,
+		dev_err(dev,
 			"incompatible product generation %d != 0", generation);
 		return -ENODEV;
 	}
 
 	product = SGP_VERS_PRODUCT(data);
 	if (product != product_id) {
-		dev_err(&data->client->dev,
-			"sensor reports a different product: 0x%04hx\n",
+		dev_err(dev, "sensor reports a different product: 0x%04hx\n",
 			product);
 		return -ENODEV;
 	}
 
 	if (SGP_VERS_RESERVED(data))
-		dev_warn(&data->client->dev, "reserved bit is set\n");
+		dev_warn(dev, "reserved bit is set\n");
 
 	/* engineering samples are not supported: no interface guarantees */
 	if (SGP_VERS_ENG_BIT(data))
@@ -456,8 +456,7 @@ static int sgp_check_compat(struct sgp_data *data,
 		    minor >= supported_versions[ix].minor)
 			return 0;
 	}
-	dev_err(&data->client->dev, "unsupported sgp version: %d.%d\n",
-		major, minor);
+	dev_err(dev, "unsupported sgp version: %d.%d\n", major, minor);
 
 	return -ENODEV;
 }
@@ -499,17 +498,18 @@ static const struct of_device_id sgp_dt_ids[] = {
 static int sgp_probe(struct i2c_client *client,
 		     const struct i2c_device_id *id)
 {
+	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	struct sgp_data *data;
 	const struct of_device_id *of_id;
 	unsigned long product_id;
 	int ret;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
-	of_id = of_match_device(sgp_dt_ids, &client->dev);
+	of_id = of_match_device(sgp_dt_ids, dev);
 	if (of_id)
 		product_id = (unsigned long)of_id->data;
 	else
@@ -541,9 +541,9 @@ static int sgp_probe(struct i2c_client *client,
 
 	sgp_init(data);
 
-	ret = devm_iio_device_register(&client->dev, indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret) {
-		dev_err(&client->dev, "failed to register iio device\n");
+		dev_err(dev, "failed to register iio device\n");
 		return ret;
 	}
 
Signature · 1 line
2.28.0
author maintainer
#32 lore raw

PATCH 27/38 iio:chemical:sgp30: Drop of_match_ptr and use generic fw accessors

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This change allow the driver to be used with ACPI PRP0001 and removes an antipattern that I want to avoid being copied into new IIO drivers.

The handling of match_data uses a different approach as device_get_match_data doesn't distinguish between no match, and a match but with NULL data.

---
 drivers/iio/chemical/sgp30.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
drivers/iio/chemical/sgp30.c +4 -6
index 410565aa20b6..c2d93b9796ce 100644
@@ -20,9 +20,9 @@
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/mutex.h>
 #include <linux/i2c.h>
-#include <linux/of_device.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
@@ -501,7 +501,6 @@ static int sgp_probe(struct i2c_client *client,
 	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	struct sgp_data *data;
-	const struct of_device_id *of_id;
 	unsigned long product_id;
 	int ret;
 
@@ -509,9 +508,8 @@ static int sgp_probe(struct i2c_client *client,
 	if (!indio_dev)
 		return -ENOMEM;
 
-	of_id = of_match_device(sgp_dt_ids, dev);
-	if (of_id)
-		product_id = (unsigned long)of_id->data;
+	if (dev_fwnode(dev))
+		product_id = (unsigned long)device_get_match_data(dev);
 	else
 		product_id = id->driver_data;
 
@@ -576,7 +574,7 @@ MODULE_DEVICE_TABLE(of, sgp_dt_ids);
 static struct i2c_driver sgp_driver = {
 	.driver = {
 		.name = "sgp30",
-		.of_match_table = of_match_ptr(sgp_dt_ids),
+		.of_match_table = sgp_dt_ids,
 	},
 	.probe = sgp_probe,
 	.remove = sgp_remove,
Signature · 1 line
2.28.0
author maintainer
#33 lore raw

PATCH 28/38 iio:chemical:vz89x: Introduce local struct device pointer.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Avoids lots of repition of &client->dev and will make the next patch tidier.

---
 drivers/iio/chemical/vz89x.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/iio/chemical/vz89x.c +5 -4
index 5586eb8e12cd..3cd469578590 100644
@@ -352,12 +352,13 @@ MODULE_DEVICE_TABLE(of, vz89x_dt_ids);
 static int vz89x_probe(struct i2c_client *client,
 		       const struct i2c_device_id *id)
 {
+	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	struct vz89x_data *data;
 	const struct of_device_id *of_id;
 	int chip_id;
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 	data = iio_priv(indio_dev);
@@ -370,7 +371,7 @@ static int vz89x_probe(struct i2c_client *client,
 	else
 		return -EOPNOTSUPP;
 
-	of_id = of_match_device(vz89x_dt_ids, &client->dev);
+	of_id = of_match_device(vz89x_dt_ids, dev);
 	if (!of_id)
 		chip_id = id->driver_data;
 	else
@@ -383,13 +384,13 @@ static int vz89x_probe(struct i2c_client *client,
 	mutex_init(&data->lock);
 
 	indio_dev->info = &vz89x_info;
-	indio_dev->name = dev_name(&client->dev);
+	indio_dev->name = dev_name(dev);
 	indio_dev->modes = INDIO_DIRECT_MODE;
 
 	indio_dev->channels = data->chip->channels;
 	indio_dev->num_channels = data->chip->num_channels;
 
-	return devm_iio_device_register(&client->dev, indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
 
 static const struct i2c_device_id vz89x_id[] = {
Signature · 1 line
2.28.0
Acked-by on v1 28/38
#34 lore raw

Re: [PATCH 28/38] iio:chemical:vz89x: Introduce local struct device pointer.

Quoted 5 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Avoids lots of repition of &client->dev and will make the next patch tidier.

Typo of repetition.

Quoted 3 lines
Quoted 51 lines
---
 drivers/iio/chemical/vz89x.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
drivers/iio/chemical/vz89x.c +5 -5
index 5586eb8e12cd..3cd469578590 100644
@@ -352,12 +352,13 @@ MODULE_DEVICE_TABLE(of, vz89x_dt_ids);
 static int vz89x_probe(struct i2c_client *client,
                       const struct i2c_device_id *id)
 {
+       struct device *dev = &client->dev;
        struct iio_dev *indio_dev;
        struct vz89x_data *data;
        const struct of_device_id *of_id;
        int chip_id;
 
-       indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+       indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
        if (!indio_dev)
                return -ENOMEM;
        data = iio_priv(indio_dev);
@@ -370,7 +371,7 @@ static int vz89x_probe(struct i2c_client *client,
        else
                return -EOPNOTSUPP;
 
-       of_id = of_match_device(vz89x_dt_ids, &client->dev);
+       of_id = of_match_device(vz89x_dt_ids, dev);
        if (!of_id)
                chip_id = id->driver_data;
        else
@@ -383,13 +384,13 @@ static int vz89x_probe(struct i2c_client *client,
        mutex_init(&data->lock);
 
        indio_dev->info = &vz89x_info;
-       indio_dev->name = dev_name(&client->dev);
+       indio_dev->name = dev_name(dev);
        indio_dev->modes = INDIO_DIRECT_MODE;
 
        indio_dev->channels = data->chip->channels;
        indio_dev->num_channels = data->chip->num_channels;
 
-       return devm_iio_device_register(&client->dev, indio_dev);
+       return devm_iio_device_register(dev, indio_dev);
 }
 
 static const struct i2c_device_id vz89x_id[] = {
--

2.28.0

author maintainer
#35 lore raw

PATCH 29/38 iio:chemical:vz89x: Drop of_match_ptr protection and use generic fw accessors

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This change allow the driver to be used with ACPI PRP0001 and removes an antipattern that I want to avoid being copied into new IIO drivers.

The handling of match_data uses a different approach as device_get_match_data() doesn't distinguish between no match, and a match but with NULL data.

---
 drivers/iio/chemical/vz89x.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/iio/chemical/vz89x.c +4 -7
index 3cd469578590..23b22a5f5c1c 100644
@@ -10,8 +10,7 @@
 #include <linux/mutex.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -355,7 +354,6 @@ static int vz89x_probe(struct i2c_client *client,
 	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	struct vz89x_data *data;
-	const struct of_device_id *of_id;
 	int chip_id;
 
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
@@ -371,11 +369,10 @@ static int vz89x_probe(struct i2c_client *client,
 	else
 		return -EOPNOTSUPP;
 
-	of_id = of_match_device(vz89x_dt_ids, dev);
-	if (!of_id)
+	if (!dev_fwnode(dev))
 		chip_id = id->driver_data;
 	else
-		chip_id = (unsigned long)of_id->data;
+		chip_id = (unsigned long)device_get_match_data(dev);
 
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
@@ -403,7 +400,7 @@ MODULE_DEVICE_TABLE(i2c, vz89x_id);
 static struct i2c_driver vz89x_driver = {
 	.driver = {
 		.name	= "vz89x",
-		.of_match_table = of_match_ptr(vz89x_dt_ids),
+		.of_match_table = vz89x_dt_ids,
 	},
 	.probe = vz89x_probe,
 	.id_table = vz89x_id,
Signature · 1 line
2.28.0
Acked-by on v1 29/38
#36 lore raw

Re: [PATCH 29/38] iio:chemical:vz89x: Drop of_match_ptr protection and use generic fw accessors

Quoted 6 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This change allow the driver to be used with ACPI PRP0001 and removes an antipattern that I want to avoid being copied into new IIO drivers.

Quoted 6 lines

The handling of match_data uses a different approach as device_get_match_data() doesn't distinguish between no match, and a match but with NULL data.

Quoted 52 lines
---
 drivers/iio/chemical/vz89x.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/iio/chemical/vz89x.c +4 -8
index 3cd469578590..23b22a5f5c1c 100644
@@ -10,8 +10,7 @@
 #include <linux/mutex.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
+#include <linux/mod_devicetable.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -355,7 +354,6 @@ static int vz89x_probe(struct i2c_client *client,
        struct device *dev = &client->dev;
        struct iio_dev *indio_dev;
        struct vz89x_data *data;
-       const struct of_device_id *of_id;
        int chip_id;
 
        indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
@@ -371,11 +369,10 @@ static int vz89x_probe(struct i2c_client *client,
        else
                return -EOPNOTSUPP;
 
-       of_id = of_match_device(vz89x_dt_ids, dev);
-       if (!of_id)
+       if (!dev_fwnode(dev))
                chip_id = id->driver_data;
        else
-               chip_id = (unsigned long)of_id->data;
+               chip_id = (unsigned long)device_get_match_data(dev);
 
        i2c_set_clientdata(client, indio_dev);
        data->client = client;
@@ -403,7 +400,7 @@ MODULE_DEVICE_TABLE(i2c, vz89x_id);
 static struct i2c_driver vz89x_driver = {
        .driver = {
                .name   = "vz89x",
-               .of_match_table = of_match_ptr(vz89x_dt_ids),
+               .of_match_table = vz89x_dt_ids,
        },
        .probe = vz89x_probe,
        .id_table = vz89x_id,
--

2.28.0

author maintainer
#37 lore raw

PATCH 30/38 iio:humidity:hdc100x: Drop of_match_ptr protection.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/humidity/hdc100x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/humidity/hdc100x.c +2 -1
index 071cb2b12bb6..2a957f19048e 100644
@@ -15,6 +15,7 @@
 
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
 
@@ -417,7 +418,7 @@ MODULE_DEVICE_TABLE(of, hdc100x_dt_ids);
 static struct i2c_driver hdc100x_driver = {
 	.driver = {
 		.name	= "hdc100x",
-		.of_match_table = of_match_ptr(hdc100x_dt_ids),
+		.of_match_table = hdc100x_dt_ids,
 	},
 	.probe = hdc100x_probe,
 	.id_table = hdc100x_id,
Signature · 1 line
2.28.0
Acked-by on v1 30/38
#38 lore raw

Re: [PATCH 30/38] iio:humidity:hdc100x: Drop of_match_ptr protection.

Quoted 9 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

Quoted 28 lines
---
 drivers/iio/humidity/hdc100x.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/humidity/hdc100x.c +2 -2
index 071cb2b12bb6..2a957f19048e 100644
@@ -15,6 +15,7 @@
 
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
 
@@ -417,7 +418,7 @@ MODULE_DEVICE_TABLE(of, hdc100x_dt_ids);
 static struct i2c_driver hdc100x_driver = {
        .driver = {
                .name   = "hdc100x",
-               .of_match_table = of_match_ptr(hdc100x_dt_ids),
+               .of_match_table = hdc100x_dt_ids,
        },
        .probe = hdc100x_probe,
        .id_table = hdc100x_id,
--

2.28.0

author maintainer
#39 lore raw

PATCH 31/38 iio:proximity:as3935: Use local struct device pointer to simplify code.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This makes the existing code easier to read and will make the following patch a little simpler.

---
 drivers/iio/proximity/as3935.c | 38 ++++++++++++++++------------------
 1 file changed, 18 insertions(+), 20 deletions(-)
drivers/iio/proximity/as3935.c +18 -20
index c339e7339ec8..4df8d53d65fb 100644
@@ -352,19 +352,20 @@ static void as3935_stop_work(void *data)
 
 static int as3935_probe(struct spi_device *spi)
 {
+	struct device *dev = &spi->dev;
 	struct iio_dev *indio_dev;
 	struct iio_trigger *trig;
 	struct as3935_state *st;
-	struct device_node *np = spi->dev.of_node;
+	struct device_node *np = dev->of_node;
 	int ret;
 
 	/* Be sure lightning event interrupt is specified */
 	if (!spi->irq) {
-		dev_err(&spi->dev, "unable to get event interrupt\n");
+		dev_err(dev, "unable to get event interrupt\n");
 		return -EINVAL;
 	}
 
-	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -378,14 +379,12 @@ static int as3935_probe(struct spi_device *spi)
 			"ams,tuning-capacitor-pf", &st->tune_cap);
 	if (ret) {
 		st->tune_cap = 0;
-		dev_warn(&spi->dev,
-			"no tuning-capacitor-pf set, defaulting to %d",
+		dev_warn(dev, "no tuning-capacitor-pf set, defaulting to %d",
 			st->tune_cap);
 	}
 
 	if (st->tune_cap > MAX_PF_CAP) {
-		dev_err(&spi->dev,
-			"wrong tuning-capacitor-pf setting of %d\n",
+		dev_err(dev, "wrong tuning-capacitor-pf setting of %d\n",
 			st->tune_cap);
 		return -EINVAL;
 	}
@@ -393,8 +392,7 @@ static int as3935_probe(struct spi_device *spi)
 	ret = of_property_read_u32(np,
 			"ams,nflwdth", &st->nflwdth_reg);
 	if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
-		dev_err(&spi->dev,
-			"invalid nflwdth setting of %d\n",
+		dev_err(dev, "invalid nflwdth setting of %d\n",
 			st->nflwdth_reg);
 		return -EINVAL;
 	}
@@ -405,7 +403,7 @@ static int as3935_probe(struct spi_device *spi)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &as3935_info;
 
-	trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
+	trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
 				      indio_dev->name, indio_dev->id);
 
 	if (!trig)
@@ -417,42 +415,42 @@ static int as3935_probe(struct spi_device *spi)
 	iio_trigger_set_drvdata(trig, indio_dev);
 	trig->ops = &iio_interrupt_trigger_ops;
 
-	ret = devm_iio_trigger_register(&spi->dev, trig);
+	ret = devm_iio_trigger_register(dev, trig);
 	if (ret) {
-		dev_err(&spi->dev, "failed to register trigger\n");
+		dev_err(dev, "failed to register trigger\n");
 		return ret;
 	}
 
-	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
 					      iio_pollfunc_store_time,
 					      as3935_trigger_handler, NULL);
 
 	if (ret) {
-		dev_err(&spi->dev, "cannot setup iio trigger\n");
+		dev_err(dev, "cannot setup iio trigger\n");
 		return ret;
 	}
 
 	calibrate_as3935(st);
 
 	INIT_DELAYED_WORK(&st->work, as3935_event_work);
-	ret = devm_add_action(&spi->dev, as3935_stop_work, indio_dev);
+	ret = devm_add_action(dev, as3935_stop_work, indio_dev);
 	if (ret)
 		return ret;
 
-	ret = devm_request_irq(&spi->dev, spi->irq,
+	ret = devm_request_irq(dev, spi->irq,
 				&as3935_interrupt_handler,
 				IRQF_TRIGGER_RISING,
-				dev_name(&spi->dev),
+				dev_name(dev),
 				indio_dev);
 
 	if (ret) {
-		dev_err(&spi->dev, "unable to request irq\n");
+		dev_err(dev, "unable to request irq\n");
 		return ret;
 	}
 
-	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	ret = devm_iio_device_register(dev, indio_dev);
 	if (ret < 0) {
-		dev_err(&spi->dev, "unable to register device\n");
+		dev_err(dev, "unable to register device\n");
 		return ret;
 	}
 	return 0;
Signature · 1 line
2.28.0
Acked-by on v1 31/38
#40 lore raw

Re: [PATCH 31/38] iio:proximity:as3935: Use local struct device pointer to simplify code.

Quoted 8 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This makes the existing code easier to read and will make the following patch a little simpler.

Quoted 124 lines
---
 drivers/iio/proximity/as3935.c | 38 ++++++++++++++++------------------
 1 file changed, 18 insertions(+), 20 deletions(-)
drivers/iio/proximity/as3935.c +18 -21
index c339e7339ec8..4df8d53d65fb 100644
@@ -352,19 +352,20 @@ static void as3935_stop_work(void *data)
 
 static int as3935_probe(struct spi_device *spi)
 {
+       struct device *dev = &spi->dev;
        struct iio_dev *indio_dev;
        struct iio_trigger *trig;
        struct as3935_state *st;
-       struct device_node *np = spi->dev.of_node;
+       struct device_node *np = dev->of_node;
        int ret;
 
        /* Be sure lightning event interrupt is specified */
        if (!spi->irq) {
-               dev_err(&spi->dev, "unable to get event interrupt\n");
+               dev_err(dev, "unable to get event interrupt\n");
                return -EINVAL;
        }
 
-       indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+       indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
        if (!indio_dev)
                return -ENOMEM;
 
@@ -378,14 +379,12 @@ static int as3935_probe(struct spi_device *spi)
                        "ams,tuning-capacitor-pf", &st->tune_cap);
        if (ret) {
                st->tune_cap = 0;
-               dev_warn(&spi->dev,
-                       "no tuning-capacitor-pf set, defaulting to %d",
+               dev_warn(dev, "no tuning-capacitor-pf set, defaulting to %d",
                        st->tune_cap);
        }
 
        if (st->tune_cap > MAX_PF_CAP) {
-               dev_err(&spi->dev,
-                       "wrong tuning-capacitor-pf setting of %d\n",
+               dev_err(dev, "wrong tuning-capacitor-pf setting of %d\n",
                        st->tune_cap);
                return -EINVAL;
        }
@@ -393,8 +392,7 @@ static int as3935_probe(struct spi_device *spi)
        ret = of_property_read_u32(np,
                        "ams,nflwdth", &st->nflwdth_reg);
        if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
-               dev_err(&spi->dev,
-                       "invalid nflwdth setting of %d\n",
+               dev_err(dev, "invalid nflwdth setting of %d\n",
                        st->nflwdth_reg);
                return -EINVAL;
        }
@@ -405,7 +403,7 @@ static int as3935_probe(struct spi_device *spi)
        indio_dev->modes = INDIO_DIRECT_MODE;
        indio_dev->info = &as3935_info;
 
-       trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
+       trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
                                      indio_dev->name, indio_dev->id);
 
        if (!trig)
@@ -417,42 +415,42 @@ static int as3935_probe(struct spi_device *spi)
        iio_trigger_set_drvdata(trig, indio_dev);
        trig->ops = &iio_interrupt_trigger_ops;
 
-       ret = devm_iio_trigger_register(&spi->dev, trig);
+       ret = devm_iio_trigger_register(dev, trig);
        if (ret) {
-               dev_err(&spi->dev, "failed to register trigger\n");
+               dev_err(dev, "failed to register trigger\n");
                return ret;
        }
 
-       ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+       ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
                                              iio_pollfunc_store_time,
                                              as3935_trigger_handler, NULL);
 
        if (ret) {
-               dev_err(&spi->dev, "cannot setup iio trigger\n");
+               dev_err(dev, "cannot setup iio trigger\n");
                return ret;
        }
 
        calibrate_as3935(st);
 
        INIT_DELAYED_WORK(&st->work, as3935_event_work);
-       ret = devm_add_action(&spi->dev, as3935_stop_work, indio_dev);
+       ret = devm_add_action(dev, as3935_stop_work, indio_dev);
        if (ret)
                return ret;
 
-       ret = devm_request_irq(&spi->dev, spi->irq,
+       ret = devm_request_irq(dev, spi->irq,
                                &as3935_interrupt_handler,
                                IRQF_TRIGGER_RISING,
-                               dev_name(&spi->dev),
+                               dev_name(dev),
                                indio_dev);
 
        if (ret) {
-               dev_err(&spi->dev, "unable to request irq\n");
+               dev_err(dev, "unable to request irq\n");
                return ret;
        }
 
-       ret = devm_iio_device_register(&spi->dev, indio_dev);
+       ret = devm_iio_device_register(dev, indio_dev);
        if (ret < 0) {
-               dev_err(&spi->dev, "unable to register device\n");
+               dev_err(dev, "unable to register device\n");
                return ret;
        }
        return 0;
--

2.28.0

author maintainer
#41 lore raw

PATCH 32/38 iio:proximity:as3935: Drop of_match_ptr and use generic fw accessors

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This change allows the driver to be used with ACPI PRP0001 and removes an antipattern that I want to avoid being copied into new IIO drivers.

---
 drivers/iio/proximity/as3935.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/proximity/as3935.c +4 -4
index 4df8d53d65fb..b79ada839e01 100644
@@ -7,6 +7,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
@@ -356,7 +357,6 @@ static int as3935_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	struct iio_trigger *trig;
 	struct as3935_state *st;
-	struct device_node *np = dev->of_node;
 	int ret;
 
 	/* Be sure lightning event interrupt is specified */
@@ -375,7 +375,7 @@ static int as3935_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, indio_dev);
 	mutex_init(&st->lock);
 
-	ret = of_property_read_u32(np,
+	ret = device_property_read_u32(dev,
 			"ams,tuning-capacitor-pf", &st->tune_cap);
 	if (ret) {
 		st->tune_cap = 0;
@@ -389,7 +389,7 @@ static int as3935_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	ret = of_property_read_u32(np,
+	ret = device_property_read_u32(dev,
 			"ams,nflwdth", &st->nflwdth_reg);
 	if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
 		dev_err(dev, "invalid nflwdth setting of %d\n",
@@ -471,7 +471,7 @@ MODULE_DEVICE_TABLE(spi, as3935_id);
 static struct spi_driver as3935_driver = {
 	.driver = {
 		.name	= "as3935",
-		.of_match_table = of_match_ptr(as3935_of_match),
+		.of_match_table = as3935_of_match,
 		.pm	= AS3935_PM_OPS,
 	},
 	.probe		= as3935_probe,
Signature · 1 line
2.28.0
Acked-by on v1 32/38
#42 lore raw

Re: [PATCH 32/38] iio:proximity:as3935: Drop of_match_ptr and use generic fw accessors

Quoted 8 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This change allows the driver to be used with ACPI PRP0001 and removes an antipattern that I want to avoid being copied into new IIO drivers.

Quoted 54 lines
---
 drivers/iio/proximity/as3935.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/iio/proximity/as3935.c +4 -5
index 4df8d53d65fb..b79ada839e01 100644
@@ -7,6 +7,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
@@ -356,7 +357,6 @@ static int as3935_probe(struct spi_device *spi)
        struct iio_dev *indio_dev;
        struct iio_trigger *trig;
        struct as3935_state *st;
-       struct device_node *np = dev->of_node;
        int ret;
 
        /* Be sure lightning event interrupt is specified */
@@ -375,7 +375,7 @@ static int as3935_probe(struct spi_device *spi)
        spi_set_drvdata(spi, indio_dev);
        mutex_init(&st->lock);
 
-       ret = of_property_read_u32(np,
+       ret = device_property_read_u32(dev,
                        "ams,tuning-capacitor-pf", &st->tune_cap);
        if (ret) {
                st->tune_cap = 0;
@@ -389,7 +389,7 @@ static int as3935_probe(struct spi_device *spi)
                return -EINVAL;
        }
 
-       ret = of_property_read_u32(np,
+       ret = device_property_read_u32(dev,
                        "ams,nflwdth", &st->nflwdth_reg);
        if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
                dev_err(dev, "invalid nflwdth setting of %d\n",
@@ -471,7 +471,7 @@ MODULE_DEVICE_TABLE(spi, as3935_id);
 static struct spi_driver as3935_driver = {
        .driver = {
                .name   = "as3935",
-               .of_match_table = of_match_ptr(as3935_of_match),
+               .of_match_table = as3935_of_match,
                .pm     = AS3935_PM_OPS,
        },
        .probe          = as3935_probe,
--

2.28.0

author maintainer
#43 lore raw

PATCH 33/38 iio:proximity:pulsedlight: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +2 -1
index a8e716dbd24e..c685f10b5ae4 100644
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/pm_runtime.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -360,7 +361,7 @@ static const struct dev_pm_ops lidar_pm_ops = {
 static struct i2c_driver lidar_driver = {
 	.driver = {
 		.name	= LIDAR_DRV_NAME,
-		.of_match_table	= of_match_ptr(lidar_dt_ids),
+		.of_match_table	= lidar_dt_ids,
 		.pm	= &lidar_pm_ops,
 	},
 	.probe		= lidar_probe,
Signature · 1 line
2.28.0
Acked-by on v1 33/38
#44 lore raw

Re: [PATCH 33/38] iio:proximity:pulsedlight: Drop of_match_ptr protection

Quoted 9 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

Quoted 28 lines
---
 drivers/iio/proximity/pulsedlight-lidar-lite-v2.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/proximity/pulsedlight-lidar-lite-v2.c +2 -2
index a8e716dbd24e..c685f10b5ae4 100644
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/pm_runtime.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -360,7 +361,7 @@ static const struct dev_pm_ops lidar_pm_ops = {
 static struct i2c_driver lidar_driver = {
        .driver = {
                .name   = LIDAR_DRV_NAME,
-               .of_match_table = of_match_ptr(lidar_dt_ids),
+               .of_match_table = lidar_dt_ids,
                .pm     = &lidar_pm_ops,
        },
        .probe          = lidar_probe,
--

2.28.0

author maintainer
#45 lore raw

PATCH 34/38 iio:magn:ak8975: Drop of_match_ptr and ACPI_PTR protections.

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Both would result in only a small size saving. For simplicity it is best to remove them. I also wish to remove both these antipatterns from IIO.

Cc Jonathan Albrieux <[email protected]>
---
 drivers/iio/magnetometer/ak8975.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/iio/magnetometer/ak8975.c +3 -5
index 03d71f796177..0141ef3b6476 100644
@@ -8,6 +8,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
@@ -17,7 +18,6 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/gpio/consumer.h>
-#include <linux/acpi.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 
@@ -773,7 +773,6 @@ static const struct iio_info ak8975_info = {
 	.read_raw = &ak8975_read_raw,
 };
 
-#ifdef CONFIG_ACPI
 static const struct acpi_device_id ak_acpi_match[] = {
 	{"AK8975", AK8975},
 	{"AK8963", AK8963},
@@ -785,7 +784,6 @@ static const struct acpi_device_id ak_acpi_match[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
-#endif
 
 static void ak8975_fill_buffer(struct iio_dev *indio_dev)
 {
@@ -1075,8 +1073,8 @@ static struct i2c_driver ak8975_driver = {
 	.driver = {
 		.name	= "ak8975",
 		.pm = &ak8975_dev_pm_ops,
-		.of_match_table = of_match_ptr(ak8975_of_match),
-		.acpi_match_table = ACPI_PTR(ak_acpi_match),
+		.of_match_table = ak8975_of_match,
+		.acpi_match_table = ak_acpi_match,
 	},
 	.probe		= ak8975_probe,
 	.remove		= ak8975_remove,
Signature · 1 line
2.28.0
Acked-by Tested-by on v1 34/38
#46 lore raw

Re: [PATCH 34/38] iio:magn:ak8975: Drop of_match_ptr and ACPI_PTR protections.

Quoted 6 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

Both would result in only a small size saving. For simplicity it is best to remove them. I also wish to remove both these antipatterns from IIO.

Hi Jonathan and thank you!

I compiled and tested this patch on ak09911 so, for what is worth,

Best regards,
Jonathan

Quoted 56 lines
Cc Jonathan Albrieux <[email protected]>
---
 drivers/iio/magnetometer/ak8975.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/iio/magnetometer/ak8975.c +3 -5
index 03d71f796177..0141ef3b6476 100644
@@ -8,6 +8,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
@@ -17,7 +18,6 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/gpio/consumer.h>
-#include <linux/acpi.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 
@@ -773,7 +773,6 @@ static const struct iio_info ak8975_info = {
 	.read_raw = &ak8975_read_raw,
 };
 
-#ifdef CONFIG_ACPI
 static const struct acpi_device_id ak_acpi_match[] = {
 	{"AK8975", AK8975},
 	{"AK8963", AK8963},
@@ -785,7 +784,6 @@ static const struct acpi_device_id ak_acpi_match[] = {
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
-#endif
 
 static void ak8975_fill_buffer(struct iio_dev *indio_dev)
 {
@@ -1075,8 +1073,8 @@ static struct i2c_driver ak8975_driver = {
 	.driver = {
 		.name	= "ak8975",
 		.pm = &ak8975_dev_pm_ops,
-		.of_match_table = of_match_ptr(ak8975_of_match),
-		.acpi_match_table = ACPI_PTR(ak_acpi_match),
+		.of_match_table = ak8975_of_match,
+		.acpi_match_table = ak_acpi_match,
 	},
 	.probe		= ak8975_probe,
 	.remove		= ak8975_remove,
Signature · 1 line
2.28.0
author maintainer
#47 lore raw

PATCH 35/38 iio:magn:ak8974: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/magnetometer/ak8974.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/magnetometer/ak8974.c +2 -1
index 7cd9768fbcb2..df5131cf28a9 100644
@@ -12,6 +12,7 @@
  * Author: Linus Walleij <[email protected]>
  */
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@@ -1051,7 +1052,7 @@ static struct i2c_driver ak8974_driver = {
 	.driver	 = {
 		.name	= "ak8974",
 		.pm = &ak8974_dev_pm_ops,
-		.of_match_table = of_match_ptr(ak8974_of_match),
+		.of_match_table = ak8974_of_match,
 	},
 	.probe	  = ak8974_probe,
 	.remove	  = ak8974_remove,
Signature · 1 line
2.28.0
Reviewed-by on v1 35/38
#48 lore raw

Re: [PATCH 35/38] iio:magn:ak8974: Drop of_match_ptr protection

Quoted 8 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

Yours,
Linus Walleij

author maintainer
#49 lore raw

PATCH 36/38 iio:humidity:htu21: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/humidity/htu21.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/humidity/htu21.c +2 -1
index 4f5d9d1c05ab..36df2a102ca4 100644
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/stat.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
@@ -247,7 +248,7 @@ static struct i2c_driver htu21_driver = {
 	.id_table = htu21_id,
 	.driver = {
 		   .name = "htu21",
-		   .of_match_table = of_match_ptr(htu21_of_match),
+		   .of_match_table = htu21_of_match,
 		   },
 };
 
Signature · 1 line
2.28.0
author maintainer
#50 lore raw

PATCH 37/38 iio:humidity:si7020: Drop of_match_ptr protection

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This prevents use of this driver with ACPI via PRP0001 and is an example of an anti pattern I'm trying to remove from IIO. Hence drop from this driver.

---
 drivers/iio/humidity/si7020.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/iio/humidity/si7020.c +2 -1
index a09b5773d377..ab6537f136ba 100644
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
 
@@ -153,7 +154,7 @@ MODULE_DEVICE_TABLE(of, si7020_dt_ids);
 static struct i2c_driver si7020_driver = {
 	.driver = {
 		.name = "si7020",
-		.of_match_table = of_match_ptr(si7020_dt_ids),
+		.of_match_table = si7020_dt_ids,
 	},
 	.probe		= si7020_probe,
 	.id_table	= si7020_id,
Signature · 1 line
2.28.0
author maintainer
#51 lore raw

PATCH 38/38 iio:health:max30102: Drop of_match_ptr and use generic fw accessors

In reply to Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This enables use of the driver with ACPI PRP0001 and also removes an antipattern that I am trying to clear out of IIO to avoid it being coppied into new drivers.

---
 drivers/iio/health/max30102.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/iio/health/max30102.c +5 -6
index bb504e993f19..543021d8df34 100644
@@ -19,7 +19,7 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -323,11 +323,10 @@ static int max30102_get_current_idx(unsigned int val, int *reg)
 static int max30102_led_init(struct max30102_data *data)
 {
 	struct device *dev = &data->client->dev;
-	struct device_node *np = dev->of_node;
 	unsigned int val;
 	int reg, ret;
 
-	ret = of_property_read_u32(np, "maxim,red-led-current-microamp", &val);
+	ret = device_property_read_u32(dev, "maxim,red-led-current-microamp", &val);
 	if (ret) {
 		dev_info(dev, "no red-led-current-microamp set\n");
 
@@ -346,7 +345,7 @@ static int max30102_led_init(struct max30102_data *data)
 		return ret;
 
 	if (data->chip_id == max30105) {
-		ret = of_property_read_u32(np,
+		ret = device_property_read_u32(dev,
 			"maxim,green-led-current-microamp", &val);
 		if (ret) {
 			dev_info(dev, "no green-led-current-microamp set\n");
@@ -368,7 +367,7 @@ static int max30102_led_init(struct max30102_data *data)
 			return ret;
 	}
 
-	ret = of_property_read_u32(np, "maxim,ir-led-current-microamp", &val);
+	ret = device_property_read_u32(dev, "maxim,ir-led-current-microamp", &val);
 	if (ret) {
 		dev_info(dev, "no ir-led-current-microamp set\n");
 
@@ -624,7 +623,7 @@ MODULE_DEVICE_TABLE(of, max30102_dt_ids);
 static struct i2c_driver max30102_driver = {
 	.driver = {
 		.name	= MAX30102_DRV_NAME,
-		.of_match_table	= of_match_ptr(max30102_dt_ids),
+		.of_match_table	= max30102_dt_ids,
 	},
 	.probe		= max30102_probe,
 	.remove		= max30102_remove,
Signature · 1 line
2.28.0
Acked-by on v1 38/38
#52 lore raw

Re: [PATCH 38/38] iio:health:max30102: Drop of_match_ptr and use generic fw accessors

Quoted 6 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This enables use of the driver with ACPI PRP0001 and also removes an antipattern that I am trying to clear out of IIO to avoid it being coppied into new drivers.

Typo, should be copied.

Quoted 3 lines
Quoted 60 lines
---
 drivers/iio/health/max30102.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/iio/health/max30102.c +5 -7
index bb504e993f19..543021d8df34 100644
@@ -19,7 +19,7 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/mutex.h>
-#include <linux/of.h>
+#include <linux/mod_devicetable.h>
 #include <linux/regmap.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
@@ -323,11 +323,10 @@ static int max30102_get_current_idx(unsigned int val, int *reg)
 static int max30102_led_init(struct max30102_data *data)
 {
        struct device *dev = &data->client->dev;
-       struct device_node *np = dev->of_node;
        unsigned int val;
        int reg, ret;
 
-       ret = of_property_read_u32(np, "maxim,red-led-current-microamp", &val);
+       ret = device_property_read_u32(dev, "maxim,red-led-current-microamp", &val);
        if (ret) {
                dev_info(dev, "no red-led-current-microamp set\n");
 
@@ -346,7 +345,7 @@ static int max30102_led_init(struct max30102_data *data)
                return ret;
 
        if (data->chip_id == max30105) {
-               ret = of_property_read_u32(np,
+               ret = device_property_read_u32(dev,
                        "maxim,green-led-current-microamp", &val);
                if (ret) {
                        dev_info(dev, "no green-led-current-microamp set\n");
@@ -368,7 +367,7 @@ static int max30102_led_init(struct max30102_data *data)
                        return ret;
        }
 
-       ret = of_property_read_u32(np, "maxim,ir-led-current-microamp", &val);
+       ret = device_property_read_u32(dev, "maxim,ir-led-current-microamp", &val);
        if (ret) {
                dev_info(dev, "no ir-led-current-microamp set\n");
 
@@ -624,7 +623,7 @@ MODULE_DEVICE_TABLE(of, max30102_dt_ids);
 static struct i2c_driver max30102_driver = {
        .driver = {
                .name   = MAX30102_DRV_NAME,
-               .of_match_table = of_match_ptr(max30102_dt_ids),
+               .of_match_table = max30102_dt_ids,
        },
        .probe          = max30102_probe,
        .remove         = max30102_remove,
--

2.28.0

Reviewed-by on the v1 series
#53 lore raw
In reply to Jonathan Cameron
Quoted 10 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This bumper set removes all the remaining cases where of_match_ptr is mostly serving to prevent use of the device via ACPI PRP0001 and complicating the code. The main aim of this set is to reduce the chances of it being used in future drivers.
It also includes some related refactorings, use of generic fw accessors, dropping of CONFIG_OF and lots of header changes inline with the above.

Quoted 6 lines

For examples of how to use PRP0001 see https://github.com/westeri/meta-acpi
which is an excellent resource from which to copy snippets of DSDT tables.

It may well not be worth changing the remaining 10 IIO drivers and I certainly don't plan to do so anytime soon.

I briefly looked at the series and didn't see anything wrong with it (esp. taking into consideration that you are already familiar with the topic).

Quoted 90 lines

Jonathan Cameron (38):
iio:potentiometer:ad5272: Drop of_match_ptr and CONFIG_OF protections. iio:potentiometer:ds1803: Drop of_match_ptr and CONFIG_OF protections iio:potentiometer:max5432: Drop of_match_ptr and use generic fw
accessors
iio:potentiometer:max5481: Drop of_match_ptr and CONFIG_OF
protections.
iio:potentiometer:max5481: Drop invalid ACPI binding. iio:potentiometer:mcp4018: Drop of_match_ptr and CONFIG_OF
protections.
iio:potentiometer:mcp4131: Drop of_match_ptr and use generic fw
interfaces.
iio:potentiometer:mcp4531: Drop of_match_ptr and CONFIG_OF
protections.
iio:dac:ad5446: Drop of_match_ptr and CONFIG_OF protections iio:dac:ad5592r: Drop of_match_ptr and ACPI_PTR protections. iio:dac:ad5593r: Drop of_match_ptr and ACPI_PTR protections. iio:dac:ad7303: Drop of_match_ptr protection iio:dac:mcp4725: drop of_match_ptr and use generic fw properties iio:dac:ti-dac082s085: Drop of_match_ptr and CONFIG_OF protections iio:dac:ti-dac5571: Drop of_match_ptr and CONFIG_OF protections iio:potentiostat:lmp91000: Drop of_match_ptr and use generic fw
accessors
iio:pressure:icp10100: Drop of_match_ptr and CONFIG_OF protections iio:pressure:ms5611: Drop of_match_ptr and CONFIG_OF protections iio:pressure:ms5637: Drop of_match_ptr protection iio:pressure:zpa2326: Drop of_match_ptr protection iio:temperature:tsys01: Drop of_match_ptr protection iio:temperature:tmp007: Drop of_match_ptr protection iio:resolver:ad2s1200: Drop of_match_ptr protection iio:chemical:ams-iaq-core: Drop of_match_ptr protection iio:chemical:atlas-sensor: Drop of_match_ptr and use generic fw
accessors
iio:chemical:sgp30: Use local variable dev to simplify code iio:chemical:sgp30: Drop of_match_ptr and use generic fw accessors iio:chemical:vz89x: Introduce local struct device pointer. iio:chemical:vz89x: Drop of_match_ptr protection and use generic fw
accessors
iio:humidity:hdc100x: Drop of_match_ptr protection. iio:proximity:as3935: Use local struct device pointer to simplify
code.
iio:proximity:as3935: Drop of_match_ptr and use generic fw accessors iio:proximity:pulsedlight: Drop of_match_ptr protection iio:magn:ak8975: Drop of_match_ptr and ACPI_PTR protections. iio:magn:ak8974: Drop of_match_ptr protection iio:humidity:htu21: Drop of_match_ptr protection iio:humidity:si7020: Drop of_match_ptr protection iio:health:max30102: Drop of_match_ptr and use generic fw accessors

 drivers/iio/chemical/ams-iaq-core.c           |  3 +-
 drivers/iio/chemical/atlas-sensor.c           | 10 ++---
 drivers/iio/chemical/sgp30.c                  | 28 ++++++------
 drivers/iio/chemical/vz89x.c                  | 18 ++++----
 drivers/iio/dac/ad5446.c                      |  5 +--
 drivers/iio/dac/ad5592r.c                     |  7 ++-
 drivers/iio/dac/ad5593r.c                     |  7 ++-
 drivers/iio/dac/ad7303.c                      |  3 +-
 drivers/iio/dac/mcp4725.c                     | 29 +++---------
 drivers/iio/dac/ti-dac082s085.c               |  5 +--
 drivers/iio/dac/ti-dac5571.c                  |  7 +--
 drivers/iio/health/max30102.c                 | 11 +++--
 drivers/iio/humidity/hdc100x.c                |  3 +-
 drivers/iio/humidity/htu21.c                  |  3 +-
 drivers/iio/humidity/si7020.c                 |  3 +-
 drivers/iio/magnetometer/ak8974.c             |  3 +-
 drivers/iio/magnetometer/ak8975.c             |  8 ++--
 drivers/iio/potentiometer/ad5272.c            |  5 +--
 drivers/iio/potentiometer/ds1803.c            |  6 +--
 drivers/iio/potentiometer/max5432.c           |  8 ++--
 drivers/iio/potentiometer/max5481.c           | 23 ++--------
 drivers/iio/potentiometer/mcp4018.c           | 12 ++---
 drivers/iio/potentiometer/mcp4131.c           |  8 ++--
 drivers/iio/potentiometer/mcp4531.c           | 11 ++---
 drivers/iio/potentiostat/lmp91000.c           | 11 +++--
 drivers/iio/pressure/icp10100.c               |  3 +-
 drivers/iio/pressure/ms5611_i2c.c             |  6 +--
 drivers/iio/pressure/ms5611_spi.c             |  6 +--
 drivers/iio/pressure/ms5637.c                 |  3 +-
 drivers/iio/pressure/zpa2326_i2c.c            |  6 +--
 drivers/iio/pressure/zpa2326_spi.c            |  6 +--
 drivers/iio/proximity/as3935.c                | 44 +++++++++----------
 .../iio/proximity/pulsedlight-lidar-lite-v2.c |  3 +-
 drivers/iio/resolver/ad2s1200.c               |  3 +-
 drivers/iio/temperature/tmp007.c              |  4 +-
 drivers/iio/temperature/tsys01.c              |  3 +-
 36 files changed, 134 insertions(+), 190 deletions(-)

--
2.28.0

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#54 lore raw
Quoted 14 lines · On Mon, 14 Sep 2020 11:04:43 +0300 Andy Shevchenko <[email protected]>…
Quoted 13 lines · Jonathan Cameron

From: Jonathan Cameron <[email protected]>

This bumper set removes all the remaining cases where of_match_ptr is mostly serving to prevent use of the device via ACPI PRP0001 and complicating the code. The main aim of this set is to reduce the chances of it being used in future drivers.
It also includes some related refactorings, use of generic fw accessors, dropping of CONFIG_OF and lots of header changes inline with the above.

For examples of how to use PRP0001 see https://github.com/westeri/meta-acpi
which is an excellent resource from which to copy snippets of DSDT tables.

Quoted 8 lines
Quoted 3 lines

It may well not be worth changing the remaining 10 IIO drivers and I certainly don't plan to do so anytime soon.

I briefly looked at the series and didn't see anything wrong with it (esp. taking into consideration that you are already familiar with the topic).

Thanks Andy + others that reviewed. I've fixed the typo's in descriptions Matt highlighted and applied the lot.

If anyone want to add tags, it will be a few days before I push this out as a non rebasing tree.

Thanks,

Jonathan

Quoted 93 lines
Quoted 91 lines

Jonathan Cameron (38):
iio:potentiometer:ad5272: Drop of_match_ptr and CONFIG_OF protections. iio:potentiometer:ds1803: Drop of_match_ptr and CONFIG_OF protections iio:potentiometer:max5432: Drop of_match_ptr and use generic fw
accessors
iio:potentiometer:max5481: Drop of_match_ptr and CONFIG_OF
protections.
iio:potentiometer:max5481: Drop invalid ACPI binding. iio:potentiometer:mcp4018: Drop of_match_ptr and CONFIG_OF
protections.
iio:potentiometer:mcp4131: Drop of_match_ptr and use generic fw
interfaces.
iio:potentiometer:mcp4531: Drop of_match_ptr and CONFIG_OF
protections.
iio:dac:ad5446: Drop of_match_ptr and CONFIG_OF protections iio:dac:ad5592r: Drop of_match_ptr and ACPI_PTR protections. iio:dac:ad5593r: Drop of_match_ptr and ACPI_PTR protections. iio:dac:ad7303: Drop of_match_ptr protection iio:dac:mcp4725: drop of_match_ptr and use generic fw properties iio:dac:ti-dac082s085: Drop of_match_ptr and CONFIG_OF protections iio:dac:ti-dac5571: Drop of_match_ptr and CONFIG_OF protections iio:potentiostat:lmp91000: Drop of_match_ptr and use generic fw
accessors
iio:pressure:icp10100: Drop of_match_ptr and CONFIG_OF protections iio:pressure:ms5611: Drop of_match_ptr and CONFIG_OF protections iio:pressure:ms5637: Drop of_match_ptr protection iio:pressure:zpa2326: Drop of_match_ptr protection iio:temperature:tsys01: Drop of_match_ptr protection iio:temperature:tmp007: Drop of_match_ptr protection iio:resolver:ad2s1200: Drop of_match_ptr protection iio:chemical:ams-iaq-core: Drop of_match_ptr protection iio:chemical:atlas-sensor: Drop of_match_ptr and use generic fw
accessors
iio:chemical:sgp30: Use local variable dev to simplify code iio:chemical:sgp30: Drop of_match_ptr and use generic fw accessors iio:chemical:vz89x: Introduce local struct device pointer. iio:chemical:vz89x: Drop of_match_ptr protection and use generic fw
accessors
iio:humidity:hdc100x: Drop of_match_ptr protection. iio:proximity:as3935: Use local struct device pointer to simplify
code.
iio:proximity:as3935: Drop of_match_ptr and use generic fw accessors iio:proximity:pulsedlight: Drop of_match_ptr protection iio:magn:ak8975: Drop of_match_ptr and ACPI_PTR protections. iio:magn:ak8974: Drop of_match_ptr protection iio:humidity:htu21: Drop of_match_ptr protection iio:humidity:si7020: Drop of_match_ptr protection iio:health:max30102: Drop of_match_ptr and use generic fw accessors

 drivers/iio/chemical/ams-iaq-core.c           |  3 +-
 drivers/iio/chemical/atlas-sensor.c           | 10 ++---
 drivers/iio/chemical/sgp30.c                  | 28 ++++++------
 drivers/iio/chemical/vz89x.c                  | 18 ++++----
 drivers/iio/dac/ad5446.c                      |  5 +--
 drivers/iio/dac/ad5592r.c                     |  7 ++-
 drivers/iio/dac/ad5593r.c                     |  7 ++-
 drivers/iio/dac/ad7303.c                      |  3 +-
 drivers/iio/dac/mcp4725.c                     | 29 +++---------
 drivers/iio/dac/ti-dac082s085.c               |  5 +--
 drivers/iio/dac/ti-dac5571.c                  |  7 +--
 drivers/iio/health/max30102.c                 | 11 +++--
 drivers/iio/humidity/hdc100x.c                |  3 +-
 drivers/iio/humidity/htu21.c                  |  3 +-
 drivers/iio/humidity/si7020.c                 |  3 +-
 drivers/iio/magnetometer/ak8974.c             |  3 +-
 drivers/iio/magnetometer/ak8975.c             |  8 ++--
 drivers/iio/potentiometer/ad5272.c            |  5 +--
 drivers/iio/potentiometer/ds1803.c            |  6 +--
 drivers/iio/potentiometer/max5432.c           |  8 ++--
 drivers/iio/potentiometer/max5481.c           | 23 ++--------
 drivers/iio/potentiometer/mcp4018.c           | 12 ++---
 drivers/iio/potentiometer/mcp4131.c           |  8 ++--
 drivers/iio/potentiometer/mcp4531.c           | 11 ++---
 drivers/iio/potentiostat/lmp91000.c           | 11 +++--
 drivers/iio/pressure/icp10100.c               |  3 +-
 drivers/iio/pressure/ms5611_i2c.c             |  6 +--
 drivers/iio/pressure/ms5611_spi.c             |  6 +--
 drivers/iio/pressure/ms5637.c                 |  3 +-
 drivers/iio/pressure/zpa2326_i2c.c            |  6 +--
 drivers/iio/pressure/zpa2326_spi.c            |  6 +--
 drivers/iio/proximity/as3935.c                | 44 +++++++++----------
 .../iio/proximity/pulsedlight-lidar-lite-v2.c |  3 +-
 drivers/iio/resolver/ad2s1200.c               |  3 +-
 drivers/iio/temperature/tmp007.c              |  4 +-
 drivers/iio/temperature/tsys01.c              |  3 +-
 36 files changed, 134 insertions(+), 190 deletions(-)

--
2.28.0