Skip to contentSkip to conversation

ARM: dts: am437x: switch to new cpsw switch drv

PATCH In review Grygorii Strashko 1 participant 2 messages Sep 10, 2020 – Sep 11, 2020

lore
Share & tools
lore
#0 lore raw

cover ARM: dts: am437x: switch to new cpsw switch drv

Hi Tony,

Since Kernel v5.5 commits:
111cf1ab4da3 ("net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch") ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
the new CPSW driver with switchdev support has been introduced and one am571x-idk board was converted to use it. And since that time (Nov 2019) no significant issues were reported for the new CPSW driver.

Therefore it's time to switch all am437x boards to use new cpsw switch driver. Those boards have 1 or 2 Ext. ports wired and configured in dual_mac mode by default. The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port, so it's safe to switch drivers.

Grygorii Strashko (3):
ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver
ARM: dts: am437x: switch to new cpsw switch drv
ARM: dts: am437x-l4: drop legacy cpsw dt node

 arch/arm/boot/dts/am4372.dtsi        |  4 +-
 arch/arm/boot/dts/am437x-cm-t43.dts  | 14 +++--
 arch/arm/boot/dts/am437x-gp-evm.dts  | 13 +++--
 arch/arm/boot/dts/am437x-idk-evm.dts | 13 +++--
 arch/arm/boot/dts/am437x-l4.dtsi     | 77 +++++++++++++++-------------
 arch/arm/boot/dts/am437x-sk-evm.dts  | 14 +++--
 arch/arm/boot/dts/am43x-epos-evm.dts | 13 +++--
 7 files changed, 78 insertions(+), 70 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw
Quoted 20 lines · Grygorii Strashko

Hi Tony,

Since Kernel v5.5 commits:
111cf1ab4da3 ("net: ethernet: ti: introduce cpsw switchdev based driver part 2 - switch") ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
the new CPSW driver with switchdev support has been introduced and one am571x-idk board was converted to use it. And since that time (Nov 2019) no significant issues were reported for the new CPSW driver.

Therefore it's time to switch all am437x boards to use new cpsw switch driver. Those boards have 1 or 2 Ext. ports wired and configured in dual_mac mode by default. The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port, so it's safe to switch drivers.

Grygorii Strashko (3):
ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver
ARM: dts: am437x: switch to new cpsw switch drv
ARM: dts: am437x-l4: drop legacy cpsw dt node

Quoted 9 lines
  arch/arm/boot/dts/am4372.dtsi        |  4 +-
  arch/arm/boot/dts/am437x-cm-t43.dts  | 14 +++--
  arch/arm/boot/dts/am437x-gp-evm.dts  | 13 +++--
  arch/arm/boot/dts/am437x-idk-evm.dts | 13 +++--
  arch/arm/boot/dts/am437x-l4.dtsi     | 77 +++++++++++++++-------------
  arch/arm/boot/dts/am437x-sk-evm.dts  | 14 +++--
  arch/arm/boot/dts/am43x-epos-evm.dts | 13 +++--
  7 files changed, 78 insertions(+), 70 deletions(-)

Pls, ignore this mail - double send.

Signature · 2 lines
Best regards,
grygorii