Skip to contentSkip to conversation

docs/bpf: fix ringbuf documentation

PATCH Applied Andrii Nakryiko 3 participants 3 messages Sep 10, 2020 – Sep 11, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 docs/bpf: fix ringbuf documentation

Remove link to litmus tests that didn't make it to upstream. Fix ringbuf benchmark link.

I wasn't able to test this with make htmldocs, unfortunately, because of Sphinx dependencies. But bench_ringbufs.c path is certainly correct now.

Fixes 97abb2b39682 ("docs/bpf: Add BPF ring buffer design notes")
---
 Documentation/bpf/ringbuf.rst | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
Documentation/bpf/ringbuf.rst +1 -4
index 75f943f0009d..4d4f3bcb1477 100644
@@ -182,9 +182,6 @@ in the order of reservations, but only after all previous records where
 already committed. It is thus possible for slow producers to temporarily hold
 off submitted records, that were reserved later.
 
-Reservation/commit/consumer protocol is verified by litmus tests in
-Documentation/litmus_tests/bpf-rb/_.
-
 One interesting implementation bit, that significantly simplifies (and thus
 speeds up as well) implementation of both producers and consumers is how data
 area is mapped twice contiguously back-to-back in the virtual memory. This
@@ -200,7 +197,7 @@ a self-pacing notifications of new data being availability.
 being available after commit only if consumer has already caught up right up to
 the record being committed. If not, consumer still has to catch up and thus
 will see new data anyways without needing an extra poll notification.
-Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c_) show that
+Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbufs.c_) show that
 this allows to achieve a very high throughput without having to resort to
 tricks like "notify only every Nth sample", which are necessary with perf
 buffer. For extreme cases, when BPF program wants more manual control of
Signature · 1 line
2.24.1
#1 lore raw
Quoted 10 lines · Andrii Nakryiko

Remove link to litmus tests that didn't make it to upstream. Fix ringbuf benchmark link.

I wasn't able to test this with make htmldocs, unfortunately, because of Sphinx dependencies. But bench_ringbufs.c path is certainly correct now.

Fixes 97abb2b39682 ("docs/bpf: Add BPF ring buffer design notes")

Applied to bpf tree. Thanks

#2 lore raw
In reply to Andrii Nakryiko

Hi Andrii,

Em Thu, 10 Sep 2020 15:52:45 -0700
Andrii Nakryiko <[email protected]> escreveu:

Quoted 2 lines

Remove link to litmus tests that didn't make it to upstream. Fix ringbuf benchmark link.

That work, thanks!

Quoted 2 lines

I wasn't able to test this with make htmldocs, unfortunately, because of Sphinx dependencies.

Weird. "make htmldocs" should be calling ./scripts/sphinx-pre-install, which tells what's needed to install Sphinx:

	$ make htmldocs
	Documentation/Makefile:30: The 'sphinx-build' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the 'sphinx-build' executable.

Detected OS: Ubuntu 19.10.
Warning: It is recommended at least Sphinx version 1.7.9.
If you want pdf, you need at least 2.4.4.
Note: It is recommended at least Sphinx version 2.4.4 if you need PDF support.
/usr/bin/python3 -m venv sphinx_2.4.4
. sphinx_2.4.4/bin/activate
pip install -r ./Documentation/sphinx/requirements.txt

By default, it recommends installing LaTeX, as this is needed by some books that use LaTeX markup for formulas (and also to make pdfdocs). That would require installing lots of things. You can get a lightweight dependency chain by calling:

	./scripts/sphinx-pre-install --no-pdf

Please let me know if you find any troubles with that.

Quoted 1 line

But bench_ringbufs.c path is certainly correct now.

It still produces this warning for bench_ringbufs.c:

/devel/v4l/docs/Documentation/bpf/ringbuf.rst:194: WARNING: Unknown target name: "bench_ringbufs.c".

That's said, I'm not sure if it is possible to do a cross-reference like this:

tools/testing/selftests/bpf/benchs/bench_ringbufs.c_

The thing is that bench_ringbufs.c won't be at the doc output directory (Documentation/output, by default), so Sphinx won't be able to solve the reference.

Maybe it could still be possible to use that without including the file at the documentation output dir, but with some extension like:

https://www.sphinx-doc.org/en/master/usage/extensions/intersphinx.html

Such extension creates "external" cross-references to some website.

There were some inconclusive discussions about using it at linux-doc ML, but nobody so far tested doing it or sent any patches moving toward such direction.

Another possibility would be to include bench_ringbufs.c inside the documentation book, using kernel-include::, literalinclude:: or include:: tags.

Se, for example:

Documentation/kbuild/issues.rst
Documentation/netlabel/draft_ietf.rst

Regards,
Mauro

Quoted 23 lines
Fixes 97abb2b39682 ("docs/bpf: Add BPF ring buffer design notes")
---
 Documentation/bpf/ringbuf.rst | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
Documentation/bpf/ringbuf.rst +0 -3
index 75f943f0009d..4d4f3bcb1477 100644
@@ -182,9 +182,6 @@ in the order of reservations, but only after all previous records where
 already committed. It is thus possible for slow producers to temporarily hold
 off submitted records, that were reserved later.
 
-Reservation/commit/consumer protocol is verified by litmus tests in
-Documentation/litmus_tests/bpf-rb/_.
-
 One interesting implementation bit, that significantly simplifies (and thus
 speeds up as well) implementation of both producers and consumers is how data
 area is mapped twice contiguously back-to-back in the virtual memory. This

Documentation/bpf/ringbuf.rst a self-pacing notifications of new data being availability. · line 203

Quoted 8 lines
Documentation/bpf/ringbuf.rst +1 -1
@@ -200,7 +197,7 @@ a self-pacing notifications of new data being availability.
 being available after commit only if consumer has already caught up right up to
 the record being committed. If not, consumer still has to catch up and thus
 will see new data anyways without needing an extra poll notification.
-Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbuf.c_) show that
+Benchmarks (see tools/testing/selftests/bpf/benchs/bench_ringbufs.c_) show that
 this allows to achieve a very high throughput without having to resort to
 tricks like "notify only every Nth sample", which are necessary with perf
 buffer. For extreme cases, when BPF program wants more manual control of

Thanks,
Mauro