Add PHY USB3 drivers for Hikey 970

This patch series add the PHY layer needed in order to support the USB functionality on Hikey 970 boards.

v3:
- split a namespace patch on two (one with code changes and another one with dt-bindings changes);
- placed just the PHY driver on this series. Another series will add the USB HUB driver and the DTS changes required to enable USB support for this board.

Mauro Carvalho Chehab (6):
phy: hisilicon: phy-hi3670-usb3: use a consistent namespace
dts: phy: phy-hi3670-usb3.txt: use a consistent namespace
phy: hisilicon: phy-hi3670-usb3: fix coding style
phy: hisilicon: phy-hi3670-usb3: change some DT properties
dt-bindings: phy: convert phy-kirin970-usb3.txt to yaml
MAINTAINERS: add myself as maintainer for Kirin 970 USB PHY

Yu Chen (2):
phy: hisilicon: add USB physical layer for Kirin 3670
phy: hisilicon: phy-hi3670-usb3: fix some issues at the init code

 .../bindings/phy/hisilicon,hi3670-usb3.yaml   |  72 ++
 MAINTAINERS                                   |   9 +-
 drivers/phy/hisilicon/Kconfig                 |  10 +
 drivers/phy/hisilicon/Makefile                |   1 +
 drivers/phy/hisilicon/phy-hi3670-usb3.c       | 671 ++++++++++++++++++
 5 files changed, 762 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
 create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c

2.26.2

I have only cover in my inbox, no other patches. Even lore doesn't show the series, not sure what happened here

~Vinod

Em Fri, 11 Sep 2020 17:17:11 +0530
Vinod Koul <[email protected]> escreveu:

Gah, it sounds that my scripts did something really weird there.

I changed it while sending some docs patches, as, by adding all maintainers and MLs for each patch on that series to the cover letter would produce around ~100 e-mail addresses, which would hardly be accepted by most of the email servers.

It sounds that I ended breaking it :-(

I'll re-send this patch series.

Thanks,
Mauro