mm/memcg: Miscellaneous cleanups and streamlining
Subsystems (3)
v2 cover mm/memcg: Miscellaneous cleanups and streamlining
v2:
- For patch 2, separate v1 and v2 processing and add back the missing total_swap_pages check.
- For patch 3, use union to merge swap and memsw page counters.
Patch 1 removes an unused enum charge_type.
Patch 2 streamlines mem_cgroup_get_max().
Patch 3 unifies swap and memsw page counters in mem_cgroup.
Waiman Long (3):
mm/memcg: Clean up obsolete enum charge_type
mm/memcg: Simplify mem_cgroup_get_max()
mm/memcg: Unify swap and memsw page counters
include/linux/memcontrol.h | 13 ++++++++----- mm/memcontrol.c | 29 ++++++++--------------------- 2 files changed, 16 insertions(+), 26 deletions(-)
Signature · 1 line
2.18.1
PATCH v2 1/3 mm/memcg: Clean up obsolete enum charge_type
Since commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") and commit 00501b531c47 ("mm: memcontrol: rewrite charge API") in v3.17, the enum charge_type was no longer used anywhere. However, the enum itself was not removed at that time. Remove the obsolete enum charge_type now.
--- mm/memcontrol.c | 8 -------- 1 file changed, 8 deletions(-)
mm/memcontrol.c +0 -8
@@ -197,14 +197,6 @@ static struct move_charge_struct {#define MEM_CGROUP_MAX_RECLAIM_LOOPS 100#define MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS 2 -enum charge_type { -MEM_CGROUP_CHARGE_TYPE_CACHE =0 , -MEM_CGROUP_CHARGE_TYPE_ANON , -MEM_CGROUP_CHARGE_TYPE_SWAPOUT ,/* for accounting swapcache */ -MEM_CGROUP_CHARGE_TYPE_DROP ,/* a page was unused swap cache */ -NR_CHARGE_TYPE , -}; -/* for encoding cft->private value on file */ enum res_type { _MEM,
Signature · 1 line
2.18.1
Re: [PATCH v2 1/3] mm/memcg: Clean up obsolete enum charge_type
Quoted 8 lines · Waiman Long
Since commit
0a31bc97c80c("mm: memcontrol: rewrite uncharge API") and commit00501b531c47("mm: memcontrol: rewrite charge API") in v3.17, the enumcharge_typewas no longer used anywhere. However, the enum itself was not removed at that time. Remove the obsolete enumcharge_typenow.Signed-off-by Waiman Long <[email protected]>Acked-by Johannes Weiner <[email protected]>Reviewed-by Shakeel Butt <[email protected]>
Quoted 26 lines
--- mm/memcontrol.c | 8 -------- 1 file changed, 8 deletions(-)mm/memcontrol.c +0
-8@@ -197,14 +197,6 @@ static struct move_charge_struct {#define MEM_CGROUP_MAX_RECLAIM_LOOPS 100#define MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS 2 -enum charge_type { -MEM_CGROUP_CHARGE_TYPE_CACHE =0 , -MEM_CGROUP_CHARGE_TYPE_ANON , -MEM_CGROUP_CHARGE_TYPE_SWAPOUT ,/* for accounting swapcache */ -MEM_CGROUP_CHARGE_TYPE_DROP ,/* a page was unused swap cache */ -NR_CHARGE_TYPE , -}; -/* for encoding cft->private value on file */ enum res_type { _MEM,Signature · 1 line
2.18.1
Signature · 2 lines
Michal Hocko SUSE Labs
PATCH v2 2/3 mm/memcg: Simplify mem_cgroup_get_max()
In reply to Waiman LongThe mem_cgroup_get_max() function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.
--- mm/memcontrol.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)
mm/memcontrol.c +9 -11
@@ -1633,17 +1633,15 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages); - max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); + +if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) + max = memcg->memsw.max; }return max; }
Signature · 1 line
2.18.1
Re: [PATCH v2 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Quoted 29 lines · Waiman Long
The
mem_cgroup_get_max()function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.Signed-off-by Waiman Long <[email protected]>--- mm/memcontrol.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)mm/memcontrol.c +0
-10@@ -1633,17 +1633,15 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages);
mm/memcontrol.c void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg) · line 1644
Quoted 10 lines
mm/memcontrol.c +9
-1- max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); + +if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) + max = memcg->memsw.max;
I agree that making v1 vs. v2 distinction here makes the code more obvious. But I do not think your code is correct for v1. In a default state it would lead to max = PAGE_COUNTER_MAX which is not something we want, right?
instead you want
max += min(READ_ONCE(memcg->memsw.max), total_swap_pages);
Quoted 6 lines
mm/memcontrol.c +0
-0}return max; }Signature · 1 line
2.18.1
Signature · 2 lines
Michal Hocko SUSE Labs
Re: [PATCH v2 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Quoted 45 lines · Michal Hocko
Quoted 29 lines · Waiman Long
The
mem_cgroup_get_max()function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.Signed-off-by Waiman Long <[email protected]>--- mm/memcontrol.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)mm/memcontrol.c +0
-10@@ -1633,17 +1633,15 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages);mm/memcontrol.c void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg) · line 1644
Quoted 10 lines
mm/memcontrol.c +9
-1- max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); + +if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) + max = memcg->memsw.max;I agree that making v1 vs. v2 distinction here makes the code more obvious. But I do not think your code is correct for v1. In a default state it would lead to max =
PAGE_COUNTER_MAXwhich is not something we want, right?
Quoted 3 lines
instead you want
max += min(READ_ONCE(memcg->memsw.max), total_swap_pages);
You are right, it is a bit tricky for v1.
I will change it to
max += min(READ_ONCE(memcg->memsw.max) - max, total_swap_pages):
Thanks,
Longman
Johannes Weiner
maintainerRe: [PATCH v2 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Quoted 46 lines · Waiman Long
Quoted 45 lines · Michal Hocko
Quoted 29 lines · Waiman Long
The
mem_cgroup_get_max()function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.Signed-off-by Waiman Long <[email protected]>--- mm/memcontrol.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)mm/memcontrol.c +0
-10@@ -1633,17 +1633,15 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages);mm/memcontrol.c void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg) · line 1644
Quoted 10 lines
mm/memcontrol.c +9
-1- max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); + +if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) + max = memcg->memsw.max;I agree that making v1 vs. v2 distinction here makes the code more obvious. But I do not think your code is correct for v1. In a default state it would lead to max =
PAGE_COUNTER_MAXwhich is not something we want, right?
Quoted 8 lines
Quoted 3 lines
instead you want
max += min(READ_ONCE(memcg->memsw.max), total_swap_pages);You are right, it is a bit tricky for v1.
I will change it to
max +=
min(READ_ONCE(memcg->memsw.max) - max, total_swap_pages):
memsw.max can be smaller than max.
max = min3(max, READ_ONCE(memcg->memsw.max), total_swap_pages)?
Johannes Weiner
maintainerRe: [PATCH v2 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Quoted 52 lines · Johannes Weiner
Quoted 51 lines · Waiman Long
Quoted 45 lines · Michal Hocko
Quoted 29 lines · Waiman Long
The
mem_cgroup_get_max()function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.Signed-off-by Waiman Long <[email protected]>--- mm/memcontrol.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)mm/memcontrol.c +0
-10@@ -1633,17 +1633,15 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages);mm/memcontrol.c void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg) · line 1644
Quoted 10 lines
mm/memcontrol.c +9
-1- max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); + +if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) + max = memcg->memsw.max;I agree that making v1 vs. v2 distinction here makes the code more obvious. But I do not think your code is correct for v1. In a default state it would lead to max =
PAGE_COUNTER_MAXwhich is not something we want, right?Quoted 3 lines
instead you want
max += min(READ_ONCE(memcg->memsw.max), total_swap_pages);You are right, it is a bit tricky for v1.
Quoted 7 lines
Quoted 3 lines
I will change it to
max +=
min(READ_ONCE(memcg->memsw.max) - max, total_swap_pages):memsw.max can be smaller than max.
max =
min3(max, READ_ONCE(memcg->memsw.max), total_swap_pages)?
Nevermind, I saw the follow-up below, and it's indeed not allowed to configure it like that.
PATCH v2 3/3 mm/memcg: Unify swap and memsw page counters
In reply to Waiman LongThe swap page counter is v2 only while memsw is v1 only. As v1 and v2 controllers cannot be active at the same time, there is no point to keep both swap and memsw page counters in mem_cgroup. The previous patch has made sure that memsw page counter is updated and accessed only when in v1 code paths. So it is now safe to alias the v1 memsw page counter to v2 swap page counter. This saves 14 long's in the size of mem_cgroup. This is a saving of 112 bytes for 64-bit archs.
While at it, also document which page counters are used in v1 and/or v2.
--- include/linux/memcontrol.h | 13 ++++++++----- mm/memcontrol.c | 3 --- 2 files changed, 8 insertions(+), 8 deletions(-)
include/linux/memcontrol.h +8 -5
@@ -215,13 +215,16 @@ struct mem_cgroup {struct mem_cgroup_id id;/* Accounted resources */ -struct page_counter memory; -struct page_counter swap; +struct page_counter memory;/* Both v1 & v2 */ + +union { +struct page_counter swap;/* v2 only */ +struct page_counter memsw;/* v1 only */ + };/* Legacy consumer-oriented counters */ -struct page_counter memsw; -struct page_counter kmem; -struct page_counter tcpmem; +struct page_counter kmem;/* v1 only */ +struct page_counter tcpmem;/* v1 only */ /* Range enforcement for interrupt charges */ struct work_struct high_work;
mm/memcontrol.c +0 -3
@@ -5281,13 +5281,11 @@ mem_cgroup_css_alloc(struct cgroup_subsys_state *parent_css) memcg->use_hierarchy = true;page_counter_init (&memcg->memory, &parent->memory);page_counter_init (&memcg->swap, &parent->swap); -page_counter_init (&memcg->memsw, &parent->memsw);page_counter_init (&memcg->kmem, &parent->kmem);page_counter_init (&memcg->tcpmem, &parent->tcpmem); }else {page_counter_init (&memcg->memory,NULL );page_counter_init (&memcg->swap,NULL ); -page_counter_init (&memcg->memsw,NULL );page_counter_init (&memcg->kmem,NULL );page_counter_init (&memcg->tcpmem,NULL );/*
@@ -5416,7 +5414,6 @@ static void mem_cgroup_css_reset(struct cgroup_subsys_state *css)page_counter_set_max (&memcg->memory,PAGE_COUNTER_MAX );page_counter_set_max (&memcg->swap,PAGE_COUNTER_MAX ); -page_counter_set_max (&memcg->memsw,PAGE_COUNTER_MAX );page_counter_set_max (&memcg->kmem,PAGE_COUNTER_MAX );page_counter_set_max (&memcg->tcpmem,PAGE_COUNTER_MAX );page_counter_set_min (&memcg->memory,0 );
Signature · 1 line
2.18.1
Re: [PATCH v2 3/3] mm/memcg: Unify swap and memsw page counters
Quoted 7 lines · Waiman Long
The swap page counter is v2 only while memsw is v1 only. As v1 and v2 controllers cannot be active at the same time, there is no point to keep both swap and memsw page counters in
mem_cgroup. The previous patch has made sure that memsw page counter is updated and accessed only when in v1 code paths. So it is now safe to alias the v1 memsw page counter to v2 swap page counter. This saves 14 long's in the size ofmem_cgroup. This is a saving of 112 bytes for 64-bit archs.
I didn't realize that page_counter is so large.
Quoted 3 lines
While at it, also document which page counters are used in v1 and/or v2.
Signed-off-by Waiman Long <[email protected]>
Quoted 59 lines
--- include/linux/memcontrol.h | 13 ++++++++----- mm/memcontrol.c | 3 --- 2 files changed, 8 insertions(+), 8 deletions(-)include/linux/memcontrol.h +8
-5@@ -215,13 +215,16 @@ struct mem_cgroup {struct mem_cgroup_id id;/* Accounted resources */ -struct page_counter memory; -struct page_counter swap; +struct page_counter memory;/* Both v1 & v2 */ + +union { +struct page_counter swap;/* v2 only */ +struct page_counter memsw;/* v1 only */ + };/* Legacy consumer-oriented counters */ -struct page_counter memsw; -struct page_counter kmem; -struct page_counter tcpmem; +struct page_counter kmem;/* v1 only */ +struct page_counter tcpmem;/* v1 only */ /* Range enforcement for interrupt charges */ struct work_struct high_work;mm/memcontrol.c +0
-3@@ -5281,13 +5281,11 @@ mem_cgroup_css_alloc(struct cgroup_subsys_state *parent_css) memcg->use_hierarchy = true;page_counter_init (&memcg->memory, &parent->memory);page_counter_init (&memcg->swap, &parent->swap); -page_counter_init (&memcg->memsw, &parent->memsw);page_counter_init (&memcg->kmem, &parent->kmem);page_counter_init (&memcg->tcpmem, &parent->tcpmem); }else {page_counter_init (&memcg->memory,NULL );page_counter_init (&memcg->swap,NULL ); -page_counter_init (&memcg->memsw,NULL );page_counter_init (&memcg->kmem,NULL );page_counter_init (&memcg->tcpmem,NULL );/* @@ -5416,7 +5414,6 @@ static void mem_cgroup_css_reset(struct cgroup_subsys_state *css)page_counter_set_max (&memcg->memory,PAGE_COUNTER_MAX );page_counter_set_max (&memcg->swap,PAGE_COUNTER_MAX ); -page_counter_set_max (&memcg->memsw,PAGE_COUNTER_MAX );page_counter_set_max (&memcg->kmem,PAGE_COUNTER_MAX );page_counter_set_max (&memcg->tcpmem,PAGE_COUNTER_MAX );page_counter_set_min (&memcg->memory,0 );Signature · 1 line
2.18.1
Signature · 2 lines
Michal Hocko SUSE Labs
Re: [PATCH v2 3/3] mm/memcg: Unify swap and memsw page counters
In reply to Waiman LongQuoted 9 lines · Waiman Long
The swap page counter is v2 only while memsw is v1 only. As v1 and v2 controllers cannot be active at the same time, there is no point to keep both swap and memsw page counters in
mem_cgroup. The previous patch has made sure that memsw page counter is updated and accessed only when in v1 code paths. So it is now safe to alias the v1 memsw page counter to v2 swap page counter. This saves 14 long's in the size ofmem_cgroup. This is a saving of 112 bytes for 64-bit archs.
Quoted 3 lines
While at it, also document which page counters are used in v1 and/or v2.
Signed-off-by Waiman Long <[email protected]>
PATCH v3 2/3 mm/memcg: Simplify mem_cgroup_get_max()
In reply to Waiman LongThe mem_cgroup_get_max() function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.
--- mm/memcontrol.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)
mm/memcontrol.c +13 -11
@@ -1633,17 +1633,19 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages); - max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); + +if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) { +unsigned long memsw =READ_ONCE (memcg->memsw.max); + +if (memsw > max) + max +=min (memsw - max, (unsigned long )total_swap_pages); + } }return max; }
Signature · 1 line
2.18.1
Re: [PATCH v3 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Quoted 32 lines · Waiman Long
The
mem_cgroup_get_max()function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.Signed-off-by Waiman Long <[email protected]>--- mm/memcontrol.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)mm/memcontrol.c +2
-11@@ -1633,17 +1633,19 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages); - max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); +
mm/memcontrol.c void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg) · line 1647
Quoted 10 lines
mm/memcontrol.c +10
-0+if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) { +unsigned long memsw =READ_ONCE (memcg->memsw.max); + +if (memsw > max) + max +=min (memsw - max, (unsigned long )total_swap_pages);
Yes this looks better. But, memsw can never be smaller than the hard limit (mem_cgroup_resize_max). I would find it slightly easier to understand if you did
/* calculate swap excess capacity from memsw limit*/ unsigned long memsw = READ_ONCE(memcg->memsw.max) - max; max += min (memsw, total_swap_pages);
Quoted 6 lines
mm/memcontrol.c +1
-0+ } }return max; }Signature · 1 line
2.18.1
Signature · 2 lines
Michal Hocko SUSE Labs
Re: [PATCH v3 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Quoted 46 lines · Michal Hocko
Quoted 32 lines · Waiman Long
The
mem_cgroup_get_max()function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.Signed-off-by Waiman Long <[email protected]>--- mm/memcontrol.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)mm/memcontrol.c +2
-11@@ -1633,17 +1633,19 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages); - max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); +mm/memcontrol.c void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg) · line 1647
Quoted 10 lines
mm/memcontrol.c +10
-0+if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) { +unsigned long memsw =READ_ONCE (memcg->memsw.max); + +if (memsw > max) + max +=min (memsw - max, (unsigned long )total_swap_pages);Yes this looks better. But, memsw can never be smaller than the hard limit (
mem_cgroup_resize_max). I would find it slightly easier to understand if you did
Quoted 3 lines
/* calculate swap excess capacity from memsw limit*/ unsigned long memsw = READ_ONCE(memcg->memsw.max) - max; max += min (memsw, total_swap_pages);
Right, I thought it was possible to set memsw lower than mem. It was not allowed. So the extra check is unnecessary. Will fix that.
Cheers,
Longman
PATCH v4 2/3 mm/memcg: Simplify mem_cgroup_get_max()
In reply to Waiman LongThe mem_cgroup_get_max() function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.
--- mm/memcontrol.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)
mm/memcontrol.c +13 -11
@@ -1633,17 +1633,19 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages); - max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); + +if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) { +/* Calculate swap excess capacity from memsw limit */ +unsigned long swap =READ_ONCE (memcg->memsw.max) - max; + + max +=min (swap, (unsigned long )total_swap_pages); + } }return max; }
Signature · 1 line
2.18.1
Re: [PATCH v4 2/3] mm/memcg: Simplify mem_cgroup_get_max()
Quoted 7 lines · Waiman Long
The
mem_cgroup_get_max()function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.Signed-off-by Waiman Long <[email protected]>
Thanks!
Quoted 41 lines
--- mm/memcontrol.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)mm/memcontrol.c +13
-11@@ -1633,17 +1633,19 @@ void mem_cgroup_print_oom_meminfo(struct mem_cgroup *memcg)*/ unsigned long mem_cgroup_get_max (struct mem_cgroup *memcg) { -unsigned long max; - - max =READ_ONCE (memcg->memory.max); -if (mem_cgroup_swappiness (memcg)) { -unsigned long memsw_max; -unsigned long swap_max; - - memsw_max = memcg->memsw.max; - swap_max =READ_ONCE (memcg->swap.max); - swap_max =min (swap_max, (unsigned long )total_swap_pages); - max =min (max + swap_max, memsw_max); +unsigned long max =READ_ONCE (memcg->memory.max); + +if (cgroup_subsys_on_dfl (memory_cgrp_subsys)) { +if (mem_cgroup_swappiness (memcg)) + max +=min (READ_ONCE (memcg->swap.max), + (unsigned long )total_swap_pages); + }else {/* v1 */ +if (mem_cgroup_swappiness (memcg)) { +/* Calculate swap excess capacity from memsw limit */ +unsigned long swap =READ_ONCE (memcg->memsw.max) - max; + + max +=min (swap, (unsigned long )total_swap_pages); + } }return max; }Signature · 1 line
2.18.1
Signature · 2 lines
Michal Hocko SUSE Labs
Re: [PATCH v4 2/3] mm/memcg: Simplify mem_cgroup_get_max()
In reply to Waiman LongQuoted 8 lines · Waiman Long
The
mem_cgroup_get_max()function used to get memory+swap max from both the v1 memsw and v2 memory+swap page counters & return the maximum of these 2 values. This is redundant and it is more efficient to just get either the v1 or the v2 values depending on which one is currently in use.Signed-off-by Waiman Long <[email protected]>