NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
Subsystems (7)
Sasha Levin
maintainerPATCH 1/8 NFSv4.1 handle ERR_DELAY error reclaiming locking state on delegation recall
From: Olga Kornievskaia <[email protected]>
[ Upstream commit 3d7a9520f0c3e6a68b6de8c5812fc8b6d7a52626 ]
A client should be able to handle getting an ERR_DELAY error while doing a LOCK call to reclaim state due to delegation being recalled. This is a transient error that can happen due to server moving its volumes and invalidating its file location cache and upon reference to it during the LOCK call needing to do an expensive lookup (leading to an ERR_DELAY error on a PUTFH).
--- fs/nfs/nfs4proc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
fs/nfs/nfs4proc.c +6 -1
@@ -6171,7 +6171,12 @@ int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state, err =nfs4_set_lock_state (state, fl);if (err !=0 )return err; - err =_nfs4_do_setlk (state,F_SETLK , fl,NFS_LOCK_NEW ); +do { + err =_nfs4_do_setlk (state,F_SETLK , fl,NFS_LOCK_NEW ); +if (err != -NFS4ERR_DELAY ) +break ; +ssleep (1 ); + }while (err == -NFS4ERR_DELAY );return nfs4_handle_delegation_recall_error (server, state, stateid, fl, err); }
Signature · 1 line
2.25.1
Sasha Levin
maintainerPATCH 2/8 scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort
From: Dinghao Liu <[email protected]>
[ Upstream commit ea403fde7552bd61bad6ea45e3feb99db77cb31e ]
When pm8001_tag_alloc() fails, task should be freed just like it is done in the subsequent error paths.
--- drivers/scsi/pm8001/pm8001_sas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/pm8001/pm8001_sas.c +1 -1
@@ -792,7 +792,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, res =pm8001_tag_alloc (pm8001_ha, &ccb_tag);if (res) -return res; + goto ex_err; ccb = &pm8001_ha->ccb_info[ccb_tag]; ccb->device = pm8001_dev; ccb->ccb_tag = ccb_tag;
Signature · 1 line
2.25.1
Sasha Levin
maintainerPATCH 3/8 scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery
In reply to Sasha LevinFrom: James Smart <[email protected]>
[ Upstream commit 7b08e89f98cee9907895fabb64cf437bc505ce9a ]
The driver is unable to successfully login with remote device. During pt2pt login, the driver completes its FLOGI request with the remote device having WWN precedence. The remote device issues its own (delayed) FLOGI after accepting the driver's and, upon transmitting the FLOGI, immediately recognizes it has already processed the driver's FLOGI thus it transitions to sending a PLOGI before waiting for an ACC to its FLOGI.
In the driver, the FLOGI is received and an ACC sent, followed by the PLOGI being received and an ACC sent. The issue is that the PLOGI reception occurs before the response from the adapter from the FLOGI ACC is received. Processing of the PLOGI sets state flags to perform the REG_RPI mailbox command and proceed with the rest of discovery on the port. The same completion routine used by both FLOGI and PLOGI is generic in nature. One of the things it does is clear flags, and those flags happen to drive the rest of discovery. So what happened was the PLOGI processing set the flags, the FLOGI ACC completion cleared them, thus when the PLOGI ACC completes it doesn't see the flags and stops.
Fix by modifying the generic completion routine to not clear the rest of discovery flag (NLP_ACC_REGLOGIN) unless the completion is also associated with performing a mailbox command as part of its handling. For things such as FLOGI ACC, there isn't a subsequent action to perform with the adapter, thus there is no mailbox cmd ptr. PLOGI ACC though will perform REG_RPI upon completion, thus there is a mailbox cmd ptr.
--- drivers/scsi/lpfc/lpfc_els.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/lpfc/lpfc_els.c +3 -1
@@ -3841,7 +3841,9 @@ lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb, out:if (ndlp &&NLP_CHK_NODE_ACT (ndlp) && shost) {spin_lock_irq (shost->host_lock); - ndlp->nlp_flag &= ~(NLP_ACC_REGLOGIN |NLP_RM_DFLT_RPI ); +if (mbox) + ndlp->nlp_flag &= ~NLP_ACC_REGLOGIN ; + ndlp->nlp_flag &= ~NLP_RM_DFLT_RPI ;spin_unlock_irq (shost->host_lock);/* If the node is not being used by another discovery thread,
Signature · 1 line
2.25.1
Sasha Levin
maintainerPATCH 4/8 SUNRPC: stop printk reading past end of string
In reply to Sasha LevinFrom: "J. Bruce Fields" <[email protected]>
[ Upstream commit 8c6b6c793ed32b8f9770ebcdf1ba99af423c303b ]
Since p points at raw xdr data, there's no guarantee that it's NULL terminated, so we should give a length. And probably escape any special characters too.
--- net/sunrpc/rpcb_clnt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/sunrpc/rpcb_clnt.c +2 -2
@@ -977,8 +977,8 @@ static int rpcb_dec_getaddr(struct rpc_rqst *req, struct xdr_stream *xdr, p =xdr_inline_decode (xdr, len);if (unlikely (p ==NULL )) goto out_fail; -dprintk ("RPC: %5u RPCB_%s reply: %s\n" , req->rq_task->tk_pid, - req->rq_task->tk_msg.rpc_proc->p_name, (char *)p); +dprintk ("RPC: %5u RPCB_%s reply: %*pE\n" , req->rq_task->tk_pid, + req->rq_task->tk_msg.rpc_proc->p_name, len, (char *)p);if (rpc_uaddr2sockaddr (req->rq_xprt->xprt_net, (char *)p, len, sap,sizeof (address)) ==0 )
Signature · 1 line
2.25.1
Sasha Levin
maintainerPATCH 5/8 rapidio: Replace 'select' DMAENGINES 'with depends on'
In reply to Sasha LevinFrom: Laurent Pinchart <[email protected]>
[ Upstream commit d2b86100245080cfdf1e95e9e07477474c1be2bd ]
Enabling a whole subsystem from a single driver 'select' is frowned upon and won't be accepted in new drivers, that need to use 'depends on' instead. Existing selection of DMAENGINES will then cause circular dependencies. Replace them with a dependency.
--- drivers/rapidio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rapidio/Kconfig +1 -1
@@ -25,7 +25,7 @@ config RAPIDIO_ENABLE_RX_TX_PORTS config RAPIDIO_DMA_ENGINE bool "DMA Engine support for RapidIO" depends on RAPIDIO - select DMADEVICES + depends on DMADEVICES select DMA_ENGINE help Say Y here if you want to use DMA Engine frameork for RapidIO data
Signature · 1 line
2.25.1
Sasha Levin
maintainerPATCH 6/8 kobject: Drop unneeded conditional in __kobject_del()
In reply to Sasha LevinFrom: Andy Shevchenko <[email protected]>
[ Upstream commit 07ecc6693f9157cf293da5d165c73fb28fd69bf4 ]
__kobject_del() is called from two places, in one where kobj is dereferenced before and thus can't be NULL, and in the other the NULL check is done before call. Drop unneeded conditional in __kobject_del().
--- lib/kobject.c | 3 --- 1 file changed, 3 deletions(-)
lib/kobject.c +0 -3
@@ -568,9 +568,6 @@ void kobject_del(struct kobject *kobj) {struct kernfs_node *sd; -if (!kobj) -return ; - sd = kobj->sd;sysfs_remove_dir (kobj);sysfs_put (sd);
Signature · 1 line
2.25.1
Sasha Levin
maintainerPATCH 7/8 i2c: algo: pca: Reapply i2c bus settings after reset
In reply to Sasha LevinFrom: Evan Nimmo <[email protected]>
[ Upstream commit 0a355aeb24081e4538d4d424cd189f16c0bbd983 ]
If something goes wrong (such as the SCL being stuck low) then we need to reset the PCA chip. The issue with this is that on reset we lose all config settings and the chip ends up in a disabled state which results in a lock up/high CPU usage. We need to re-apply any configuration that had previously been set and re-enable the chip.
--- drivers/i2c/algos/i2c-algo-pca.c | 35 +++++++++++++++++++++----------- include/linux/i2c-algo-pca.h | 15 ++++++++++++++ 2 files changed, 38 insertions(+), 12 deletions(-)
drivers/i2c/algos/i2c-algo-pca.c +23 -12
@@ -50,8 +50,22 @@ static void pca_reset(struct i2c_algo_pca_data *adap)pca_outw (adap,I2C_PCA_INDPTR ,I2C_PCA_IPRESET );pca_outw (adap,I2C_PCA_IND ,0xA5 );pca_outw (adap,I2C_PCA_IND ,0x5A ); + +/* +* After a reset we need to re-apply any configuration +* (calculated in pca_init) to get the bus in a working state. +*/ +pca_outw (adap,I2C_PCA_INDPTR ,I2C_PCA_IMODE ); +pca_outw (adap,I2C_PCA_IND , adap->bus_settings.mode); +pca_outw (adap,I2C_PCA_INDPTR ,I2C_PCA_ISCLL ); +pca_outw (adap,I2C_PCA_IND , adap->bus_settings.tlow); +pca_outw (adap,I2C_PCA_INDPTR ,I2C_PCA_ISCLH ); +pca_outw (adap,I2C_PCA_IND , adap->bus_settings.thi); + +pca_set_con (adap,I2C_PCA_CON_ENSIO ); }else { adap->reset_chip (adap->data); +pca_set_con (adap,I2C_PCA_CON_ENSIO | adap->bus_settings.clock_freq); } }
@@ -435,13 +449,14 @@ static int pca_init(struct i2c_adapter *adap) " Use the nominal frequency.\n", adap->name); } -pca_reset (pca_data); - clock =pca_clock (pca_data);printk (KERN_INFO "%s: Clock frequency is %dkHz\n" , adap->name, freqs[clock]); -pca_set_con (pca_data,I2C_PCA_CON_ENSIO | clock); +/* Store settings as these will be needed when the PCA chip is reset */ + pca_data->bus_settings.clock_freq = clock; + +pca_reset (pca_data); }else {int clock;int mode;
@@ -508,19 +523,15 @@ static int pca_init(struct i2c_adapter *adap) thi = tlow * min_thi / min_tlow; } +/* Store settings as these will be needed when the PCA chip is reset */ + pca_data->bus_settings.mode = mode; + pca_data->bus_settings.tlow = tlow; + pca_data->bus_settings.thi = thi; +pca_reset (pca_data);printk (KERN_INFO "%s: Clock frequency is %dHz\n" , adap->name, clock *100 ); - -pca_outw (pca_data,I2C_PCA_INDPTR ,I2C_PCA_IMODE ); -pca_outw (pca_data,I2C_PCA_IND , mode); -pca_outw (pca_data,I2C_PCA_INDPTR ,I2C_PCA_ISCLL ); -pca_outw (pca_data,I2C_PCA_IND , tlow); -pca_outw (pca_data,I2C_PCA_INDPTR ,I2C_PCA_ISCLH ); -pca_outw (pca_data,I2C_PCA_IND , thi); - -pca_set_con (pca_data,I2C_PCA_CON_ENSIO ); }udelay (500 );/* 500 us for oscillator to stabilise */
include/linux/i2c-algo-pca.h +15 -0
@@ -52,6 +52,20 @@#define I2C_PCA_CON_SI 0x08/* Serial Interrupt */ #define I2C_PCA_CON_CR 0x07/* Clock Rate (MASK) */ +/** +* struct pca_i2c_bus_settings - The configured PCA i2c bus settings +* @mode: Configured i2c bus mode +* @tlow: Configured SCL LOW period +* @thi: Configured SCL HIGH period +* @clock_freq: The configured clock frequency +*/ +struct pca_i2c_bus_settings { +int mode; +int tlow; +int thi; +int clock_freq; +}; +struct i2c_algo_pca_data {void *data;/* private low level data */ void (*write_byte) (void *data,int reg,int val);
@@ -63,6 +77,7 @@ struct i2c_algo_pca_data {* For PCA9665, use the frequency you want here. */ unsigned int i2c_clock;unsigned int chip; +struct pca_i2c_bus_settings bus_settings; };int i2c_pca_add_bus (struct i2c_adapter *);
Signature · 1 line
2.25.1
Sasha Levin
maintainerPATCH 8/8 gcov: add support for GCC 10.1
In reply to Sasha LevinFrom: Peter Oberparleiter <[email protected]>
[ Upstream commit 40249c6962075c040fd071339acae524f18bfac9 ]
Using gcov to collect coverage data for kernels compiled with GCC 10.1 causes random malfunctions and kernel crashes. This is the result of a changed GCOV_COUNTERS value in GCC 10.1 that causes a mismatch between the layout of the gcov_info structure created by GCC profiling code and the related structure used by the kernel.
Fix this by updating the in-kernel GCOV_COUNTERS value. Also re-enable config GCOV_KERNEL for use with GCC 10.
--- kernel/gcov/gcc_4_7.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
kernel/gcov/gcc_4_7.c +3 -1
@@ -18,7 +18,9 @@#include <linux/vmalloc.h> #include "gcov.h" -#if (__GNUC__ >=7 ) +#if (__GNUC__ >=10 ) +#define GCOV_COUNTERS 8 +#elif (__GNUC__ >=7 )#define GCOV_COUNTERS 9#elif (__GNUC__ >5 ) || (__GNUC__ ==5 && __GNUC_MINOR__ >=1 )#define GCOV_COUNTERS 10
Signature · 1 line
2.25.1