Skip to contentSkip to conversation

arm64: dts: imx8mq-evk: Add MIPI DSI support

PATCH Applied Fabio Estevam 3 participants 5 messages Sep 14, 2020 – Sep 22, 2020

Subsystems (2)
lore
Share & tools
lore

Fabio Estevam

author reviewer
#0 lore raw

PATCH 1/2 arm64: dts: imx8mq-evk: Add MIPI DSI support

imx8mq-evk has a MIPI DSI port that can be used to connect a Raydium RM67191 panel.

Add support for it.

---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 44 ++++++++++++++++++++
 1 file changed, 44 insertions(+)
arch/arm64/boot/dts/freescale/imx8mq-evk.dts +44 -0
index 7c6808814856..2418cca00bc5 100644
@@ -132,6 +132,10 @@
 	};
 };
 
+&dphy {
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -255,6 +259,40 @@
 	};
 };
 
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		pinctrl-0 = <&pinctrl_mipi_dsi>;
+		pinctrl-names = "default";
+		compatible = "raydium,rm67191";
+		reg = <0>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+		dsi-lanes = <4>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
 &pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
@@ -388,6 +426,12 @@
 		>;
 	};
 
+	pinctrl_mipi_dsi: mipidsigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6		0x16
+		>;
+	};
+
 	pinctrl_pcie0: pcie0grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B		0x76
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author reviewer
#1 lore raw

PATCH 2/2 arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers

Select the eLCDIF display controller and Raydium RM67191 panel drivers, so that MIPI DSI can be functional by default on a imx8mq-evk board.

---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
index 63003ec116ee..e5cf51108423 100644
@@ -650,6 +650,7 @@ CONFIG_DRM_MSM=m
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
 CONFIG_DRM_PANEL_SITRONIX_ST7703=m
 CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
 CONFIG_DRM_DISPLAY_CONNECTOR=m
@@ -667,6 +668,7 @@ CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
 CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MXSFB=m
 CONFIG_DRM_MESON=m
 CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Reviewed-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers

Hi Fabio,

Quoted 4 lines · Fabio Estevam

Select the eLCDIF display controller and Raydium RM67191 panel drivers, so that MIPI DSI can be functional by default on a imx8mq-evk board.

-- Guido

Quoted 27 lines
---
 arch/arm64/configs/defconfig | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
index 63003ec116ee..e5cf51108423 100644
@@ -650,6 +650,7 @@ CONFIG_DRM_MSM=m
 CONFIG_DRM_TEGRA=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
 CONFIG_DRM_PANEL_SITRONIX_ST7703=m
 CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
 CONFIG_DRM_DISPLAY_CONNECTOR=m
@@ -667,6 +668,7 @@ CONFIG_DRM_VC4=m
 CONFIG_DRM_ETNAVIV=m
 CONFIG_DRM_HISI_HIBMC=m
 CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MXSFB=m
 CONFIG_DRM_MESON=m
 CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
Signature · 1 line
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Acked-by on v1 1/2
#3 lore raw
In reply to Fabio Estevam

Hi,

Quoted 4 lines · Fabio Estevam

imx8mq-evk has a MIPI DSI port that can be used to connect a Raydium RM67191 panel.

Add support for it.

This looks good regarding the DTS changes but i don't know if this is a reasonable default for the EVK so i'm doing a:

Cheers,
-- Guido

Quoted 78 lines
---
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 44 ++++++++++++++++++++
 1 file changed, 44 insertions(+)
arch/arm64/boot/dts/freescale/imx8mq-evk.dts +44 -0
index 7c6808814856..2418cca00bc5 100644
@@ -132,6 +132,10 @@
 	};
 };
 
+&dphy {
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
@@ -255,6 +259,40 @@
 	};
 };
 
+&lcdif {
+	status = "okay";
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		pinctrl-0 = <&pinctrl_mipi_dsi>;
+		pinctrl-names = "default";
+		compatible = "raydium,rm67191";
+		reg = <0>;
+		reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+		dsi-lanes = <4>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
 &pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie0>;
@@ -388,6 +426,12 @@
 		>;
 	};
 
+	pinctrl_mipi_dsi: mipidsigrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI1_SCLK_GPIO5_IO6		0x16
+		>;
+	};
+
 	pinctrl_pcie0: pcie0grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B		0x76
Signature · 1 line
2.17.1

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel