Skip to contentSkip to conversation

armv7R: K3: am654: U-Boot

DISCUSSION Michal Simek 3 participants 7 messages Sep 14, 2020 – Sep 29, 2020

lore
Share & tools
lore
#0 lore raw

Hi Tom and Lokesh,

I have been validating R5 on ZynqMP if u-boot is still working with latest u-boot.
I found that you have added support for platform in subject. Can you please tell me how you use u-boot on R5s?
Have you tried to run Linux on it too?

Thanks,
Michal

#1 lore raw
Quoted 7 lines · Michal Simek

Hi Tom and Lokesh,

I have been validating R5 on ZynqMP if u-boot is still working with latest u-boot.
I found that you have added support for platform in subject. Can you please tell me how you use u-boot on R5s?
Have you tried to run Linux on it too?

I'll let Lokesh point to where the design of the am65x platform has been talked about. But I can confirm that the combination of am65x_evm_r5 + am65x_evm_a53 are part of my regular HW testing cycle that I do for each PR.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200914/56185a73/attachment.sig>
#2 lore raw

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Tom,

Quoted 9 lines · Tom Rini
Quoted 6 lines · Michal Simek

Hi Tom and Lokesh,

I have been validating R5 on ZynqMP if u-boot is still working with latest u-boot. I found that you have added support for platform in subject. Can you please tell me how you use u-boot on R5s? Have you tried to run Linux on it too?

Quoted 4 lines

I'll let Lokesh point to where the design of the am65x platform has been talked about. But I can confirm that the combination of am65x_evm_r5 + am65x_evm_a53 are part of my regular HW testing cycle that I do for each PR.

Do you have any logs from that?
I see that you use SPL and also enabling booting Linux. Are you also testing booting to OS?
Are you also supporting booting R5 from A53 and vice versa?

Thanks,
Michal
-----BEGIN PGP SIGNATURE-----

iF0EARECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX1+FSQAKCRDKSWXLKUoM ITiyAJ9M52U2LBBxXRnOYj/LWlhACV7lLgCePxQsoElEN2Qqp8F5CDjVbRhnhmc= =pOxX
-----END PGP SIGNATURE-----

#3 lore raw
Quoted 15 lines · Michal Simek

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Tom,

Quoted 9 lines · Tom Rini
Quoted 6 lines · Michal Simek

Hi Tom and Lokesh,

I have been validating R5 on ZynqMP if u-boot is still working with latest u-boot. I found that you have added support for platform in subject. Can you please tell me how you use u-boot on R5s? Have you tried to run Linux on it too?

Quoted 6 lines
Quoted 4 lines

I'll let Lokesh point to where the design of the am65x platform has been talked about. But I can confirm that the combination of am65x_evm_r5 + am65x_evm_a53 are part of my regular HW testing cycle that I do for each PR.

Do you have any logs from that?

I'll fire off a boot up off-list, sure.

Quoted 3 lines

I see that you use SPL and also enabling booting Linux. Are you also testing booting to OS?
Are you also supporting booting R5 from A53 and vice versa?

The general (and only?) flow is R5 starts A53. There's no Linux for the R5 side.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200914/70ad7022/attachment.sig>
#4 lore raw
In reply to Michal Simek

Hi Michal,

Quoted 14 lines · Michal Simek

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Tom,

Quoted 8 lines · Tom Rini
Quoted 6 lines · Michal Simek

Hi Tom and Lokesh,

I have been validating R5 on ZynqMP if u-boot is still working with latest u-boot. I found that you have added support for platform in subject. Can you please tell me how you use u-boot on R5s? Have you tried to run Linux on it too?

The whole boot flow is captured here[0]. See if it helps

[0] https://gitlab.denx.de/u-boot/u-boot/-/blob/master/board/ti/am65x/README

No, we never tried Linux on R5. But I did verify U-Boot(non-SPL) on R5 just for experimentation sake, and it works well. One hurdle I faced was that by default any region above 0x8000_0000 is marked as execute never. Need to setup right MPU configurations before jumping to U-Boot/Linux.

Quoted 7 lines
Quoted 5 lines

I'll let Lokesh point to where the design of the am65x platform has been talked about. But I can confirm that the combination of am65x_evm_r5 + am65x_evm_a53 are part of my regular HW testing cycle that I do for each PR.

Do you have any logs from that?

I don't think anything interesting will be obtained from R5 SPL logs. Just the SPL banner and boot device. Anything specific you are looking for? I am on a vacation. If you insist, I can get logs once I am back from vacation (i.e.next week).

Quoted 2 lines

I see that you use SPL and also enabling booting Linux. Are you also testing booting to OS?

No.

Quoted 1 line

Are you also supporting booting R5 from A53 and vice versa?

Yes, R5 starting A53 and A53 starting R5 are supported.

Thanks and regards,
Lokesh

Quoted 10 lines

Thanks,
Michal
-----BEGIN PGP SIGNATURE-----

iF0EARECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX1+FSQAKCRDKSWXLKUoM ITiyAJ9M52U2LBBxXRnOYj/LWlhACV7lLgCePxQsoElEN2Qqp8F5CDjVbRhnhmc= =pOxX
-----END PGP SIGNATURE-----

#5 lore raw

Hi Lokesh,

Quoted 18 lines · Lokesh Vutla

Hi Michal,

On 14/09/20 8:29 pm, Michal Simek wrote:
Hi Tom,

Quoted 12 lines · Tom Rini
Quoted 8 lines
Quoted 8 lines · Michal Simek
Quoted 7 lines

Hi Tom and Lokesh,

I have been validating R5 on ZynqMP if u-boot is still working with latest u-boot. I found that you have added support for platform in subject. Can you please tell me how you use u-boot on R5s? Have you tried to run Linux on it too?

The whole boot flow is captured here[0]. See if it helps

[0] https://gitlab.denx.de/u-boot/u-boot/-/blob/master/board/ti/am65x/README

thanks.

Quoted 5 lines
Quoted 5 lines

No, we never tried Linux on R5. But I did verify U-Boot(non-SPL) on R5 just for experimentation sake, and it works well. One hurdle I faced was that by default any region above 0x8000_0000 is marked as execute never. Need to setup right MPU configurations before jumping to U-Boot/Linux.

I wanted to always run Linux on it. Was talking to Nicolas Pitre about it in past but never really had time to run it but should be possible to do so.

Quoted 14 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

I'll let Lokesh point to where the design of the am65x platform has been talked about. But I can confirm that the combination of am65x_evm_r5 + am65x_evm_a53 are part of my regular HW testing cycle that I do for each PR.

Do you have any logs from that?

Quoted 4 lines

I don't think anything interesting will be obtained from R5 SPL logs. Just the SPL banner and boot device. Anything specific you are looking for? I am on a vacation. If you insist, I can get logs once I am back from vacation (i.e.next week).

Quoted 8 lines

I see that you use SPL and also enabling booting Linux. Are you also testing booting to OS?

Quoted 1 line

No.

Are you also supporting booting R5 from A53 and vice versa?

Quoted 1 line

Yes, R5 starting A53 and A53 starting R5 are supported.

ok. As I see you have remoteproc driver for it.
Is that DT binding which you are using approved via dt mailing list? Just curious because I can't see dt binding document.

Thanks,
Michal

#6 lore raw
In reply to Tom Rini

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Lokesh,

Quoted 9 lines · Tom Rini
Quoted 6 lines · Michal Simek

Hi Tom and Lokesh,

I have been validating R5 on ZynqMP if u-boot is still working with latest u-boot. I found that you have added support for platform in subject. Can you please tell me how you use u-boot on R5s? Have you tried to run Linux on it too?

Quoted 5 lines

I'll let Lokesh point to where the design of the am65x platform has been talked about. But I can confirm that the combination of am65x_evm_r5 + am65x_evm_a53 are part of my regular HW testing cycle that I do for each PR.

Can you send me some links?

Thanks,
Michal
-----BEGIN PGP SIGNATURE-----

iF0EARECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCX2yD/QAKCRDKSWXLKUoM IZYTAJ9adyyFsqU507szGHn82srRadC1tQCfYrwJSJQUab03M1qLHlHczRY3y2k= =fIL1
-----END PGP SIGNATURE-----