dax: Fix stack overflow when mounting fsdax pmem device
Subsystems (4)
PATCH 1/1 dax: Fix stack overflow when mounting fsdax pmem device
From: Adrian Huang <[email protected]>
When mounting fsdax pmem device, commit 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices") introduces the stack overflow [1][2]. Here is the call path for mounting ext4 file system:
ext4_fill_super
bdev_dax_supported
__bdev_dax_supported
dax_supported
generic_fsdax_supported
__generic_fsdax_supported
bdev_dax_supported
The call path leads to the infinite calling loop, so we cannot call bdev_dax_supported() in __generic_fsdax_supported(). The sanity checking of the variable 'dax_dev' is moved prior to the two bdev_dax_pgoff() checks [3][4].
To fix the issue triggered by lvm2-testsuite (the issue that the above-mentioned commit wants to fix), this patch does not print the "error: dax access failed" message if the physical disk does not support DAX (dax_dev is NULL). The detail info is described as follows:
1. The dax_dev of the dm devices (dm-0, dm-1..) is always allocated
in alloc_dev() [drivers/md/dm.c].
2. When calling __generic_fsdax_supported() with dm-0 device, the call path is shown as follows (the physical disks of dm-0 do not support DAX):
dax_direct_access (valid dax_dev with dm-0)
dax_dev->ops->direct_access
dm_dax_direct_access
ti->type->direct_access
linear_dax_direct_access (assume the target is linear)
dax_direct_access (dax_dev is NULLL with ram0, or sdaX)
3. The call 'dax_direct_access()' in __generic_fsdax_supported() gets the returned value '-EOPNOTSUPP'.
4. However, the message 'dm-3: error: dax access failed (-5)' is still printed for the dm target 'error' since io_err_dax_direct_access() always returns the status '-EIO'. Cc' device mapper maintainers to see if they have concerns.
[1] https://lists.01.org/hyperkitty/list/[email protected]/thread/BULZHRILK7N2WS2JVISNF2QZNRQK6JU4/
[2] https://lists.01.org/hyperkitty/list/[email protected]/thread/OOZGFY3RNQGTGJJCH52YXCSYIDXMOPXO/
[3] https://lists.01.org/hyperkitty/list/[email protected]/message/SMQW2LY3QHPXOAW76RKNSCGG3QJFO7HT/
[4] https://lists.01.org/hyperkitty/list/[email protected]/message/7E2X6UGX5RQ2ISGYNAF66VLY5BKBFI4M/
--- drivers/dax/super.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)
drivers/dax/super.c +16 -7
@@ -85,6 +85,12 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,return false; } +if (!dax_dev) { +pr_debug ("%s: error: dax unsupported by block device\n" , +bdevname (bdev, buf)); +return false; + } + err =bdev_dax_pgoff (bdev, start,PAGE_SIZE , &pgoff);if (err) { pr_info("%s: error: unaligned partition for dax\n",
@@ -100,19 +106,22 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,return false; } -if (!dax_dev || !bdev_dax_supported (bdev, blocksize)) { -pr_debug ("%s: error: dax unsupported by block device\n" , -bdevname (bdev, buf)); -return false; - } - id =dax_read_lock (); len =dax_direct_access (dax_dev, pgoff,1 , &kaddr, &pfn); len2 =dax_direct_access (dax_dev, pgoff_end,1 , &end_kaddr, &end_pfn);if (len <1 || len2 <1 ) { -pr_info ("%s: error: dax access failed (%ld)\n" , +/* +* Only print the real error message: do not need to print +* the message for the underlying raw disk (physical disk) +* that does not support DAX (dax_dev = NULL). This case +* is observed when physical disks are configured by +* lvm2 (device mapper). +*/ +if (len != -EOPNOTSUPP && len2 != -EOPNOTSUPP ) { +pr_info ("%s: error: dax access failed (%ld)\n" ,bdevname (bdev, buf), len <1 ? len : len2); + }dax_read_unlock (id);return false; }
Signature · 4 lines
2.17.1 _______________________________________________ Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
Jan Kara
reviewerQuoted 19 lines · Adrian Huang
From: Adrian Huang <[email protected]>
When mounting fsdax pmem device, commit
6180bb446ab6("dax: fix detection of dax support for non-persistent memory block devices") introduces the stack overflow [1][2]. Here is the call path for mounting ext4 file system:
ext4_fill_super
bdev_dax_supported
__bdev_dax_supported
dax_supported
generic_fsdax_supported
__generic_fsdax_supported
bdev_dax_supportedThe call path leads to the infinite calling loop, so we cannot call
bdev_dax_supported()in__generic_fsdax_supported(). The sanity checking of the variable 'dax_dev' is moved prior to the twobdev_dax_pgoff()checks [3][4].
Quoted 4 lines
To fix the issue triggered by lvm2-testsuite (the issue that the above-mentioned commit wants to fix), this patch does not print the "error: dax access failed" message if the physical disk does not support DAX (
dax_devis NULL). The detail info is described as follows:
Thanks for looking into this!
Quoted 12 lines
1. The
dax_devof the dm devices (dm-0, dm-1..) is always allocatedin alloc_dev() [drivers/md/dm.c].2. When calling
__generic_fsdax_supported()with dm-0 device, the call path is shown as follows (the physical disks of dm-0 do not support DAX):
dax_direct_access(validdax_devwith dm-0)
dax_dev->ops->direct_access
dm_dax_direct_access
ti->type->direct_access
linear_dax_direct_access(assume the target is linear)
dax_direct_access(dax_devis NULLL with ram0, or sdaX)
I'm not sure how you can get __generic_fsdax_supported() called for dm-0? Possibly because there's another dm device stacked on top of it and dm_table_supports_dax() calls generic_fsdax_supported()? That actually seems to be a bug in dm_table_supports_dax() (device_supports_dax() in particular). I'd think it should be calling dax_supported() instead of generic_fsdax_supported() so that proper device callback gets called when determining whether a device supports DAX or not.
Quoted 2 lines
3. The call '
dax_direct_access()' in__generic_fsdax_supported()gets the returned value '-EOPNOTSUPP'.
I don't think this should happen under any normal conditions after the above bug is fixed. -EOPNOTSUPP is returned when dax_dev is NULL and that should have been caught earlier... So at this poing I don't think your changes to printing errors after dax_direct_access() are needed.
Honza
Quoted 77 lines
4. However, the message 'dm-3: error: dax access failed (-5)' is still printed for the dm target 'error' since
io_err_dax_direct_access()always returns the status '-EIO'. Cc' device mapper maintainers to see if they have concerns.[1] https://lists.01.org/hyperkitty/list/[email protected]/thread/BULZHRILK7N2WS2JVISNF2QZNRQK6JU4/
[2] https://lists.01.org/hyperkitty/list/[email protected]/thread/OOZGFY3RNQGTGJJCH52YXCSYIDXMOPXO/
[3] https://lists.01.org/hyperkitty/list/[email protected]/message/SMQW2LY3QHPXOAW76RKNSCGG3QJFO7HT/
[4] https://lists.01.org/hyperkitty/list/[email protected]/message/7E2X6UGX5RQ2ISGYNAF66VLY5BKBFI4M/Fixes 6180bb446ab6 ("dax: fix detection of dax support for non-persistent memory block devices")Cc Coly Li <[email protected]>Cc Dan Williams <[email protected]>Cc Vishal Verma <[email protected]>Cc Dave Jiang <[email protected]>Cc Ira Weiny <[email protected]>Cc John Pittman <[email protected]>Cc Mikulas Patocka <[email protected]>Cc Alasdair Kergon <[email protected]>Cc Mike Snitzer <[email protected]>Signed-off-by Adrian Huang <[email protected]>--- drivers/dax/super.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-)drivers/dax/super.c +16
-7@@ -85,6 +85,12 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,return false; } +if (!dax_dev) { +pr_debug ("%s: error: dax unsupported by block device\n" , +bdevname (bdev, buf)); +return false; + } + err =bdev_dax_pgoff (bdev, start,PAGE_SIZE , &pgoff);if (err) { pr_info("%s: error: unaligned partition for dax\n",@@ -100,19 +106,22 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,return false; } -if (!dax_dev || !bdev_dax_supported (bdev, blocksize)) { -pr_debug ("%s: error: dax unsupported by block device\n" , -bdevname (bdev, buf)); -return false; - } - id =dax_read_lock (); len =dax_direct_access (dax_dev, pgoff,1 , &kaddr, &pfn); len2 =dax_direct_access (dax_dev, pgoff_end,1 , &end_kaddr, &end_pfn);if (len <1 || len2 <1 ) { -pr_info ("%s: error: dax access failed (%ld)\n" , +/* +* Only print the real error message: do not need to print +* the message for the underlying raw disk (physical disk) +* that does not support DAX (dax_dev = NULL). This case +* is observed when physical disks are configured by +* lvm2 (device mapper). +*/ +if (len != -EOPNOTSUPP && len2 != -EOPNOTSUPP ) { +pr_info ("%s: error: dax access failed (%ld)\n" ,bdevname (bdev, buf), len <1 ? len : len2); + }dax_read_unlock (id);return false; }Signature · 4 lines
2.17.1 _______________________________________________ Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
Signature · 5 lines
Jan Kara <[email protected]> SUSE Labs, CR _______________________________________________ Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
Quoted 11 lines
-----Original Message-----
From: Jan Kara <[email protected]>I'm not sure how you can get
__generic_fsdax_supported()called for dm-0? Possibly because there's another dm device stacked on top of it anddm_table_supports_dax()callsgeneric_fsdax_supported()? That actually seems to be a bug indm_table_supports_dax()(device_supports_dax()in particular). I'd think it should be callingdax_supported()instead ofgeneric_fsdax_supported()so that proper device callback gets called when determining whether a device supports DAX or not.
Yes, you're right. There's another dm device stacked on top of it.
When applying the following patch and running 'lvm2-testsuite --only activate-minor.sh', the following error messages are observed.
dm-3: error: dax access failed (-95)
dm-3: error: dax access failed (-95)
dm-3: error: dax access failed (-95)
The commands 'lvchange $vg/foo -My --major=255 --minor=123' and 'lvchange $vg/foo -a y' in activate-minor.sh (https://fossies.org/linux/LVM2/test/shell/activate-minor.sh) create another dm device (dm-123) on top of dm-3. Please see the following command output.
# ls -l /dev/mapper total 0 lrwxrwxrwx. 1 root root 7 Sep 16 02:12 LVMTEST14781pv1 -> ../dm-3 lrwxrwxrwx. 1 root root 9 Sep 16 02:12 LVMTEST14781vg-foo -> ../dm-123 crw-------. 1 root root 10, 236 Sep 16 01:41 control lrwxrwxrwx. 1 root root 7 Sep 16 01:41 rhel-home -> ../dm-2 lrwxrwxrwx. 1 root root 7 Sep 16 01:41 rhel-root -> ../dm-0 lrwxrwxrwx. 1 root root 7 Sep 16 01:41 rhel-swap -> ../dm-1
# ls -l /dev/dm* brw-rw----. 1 root disk 253, 0 Sep 16 01:41 /dev/dm-0 brw-rw----. 1 root disk 253, 1 Sep 16 01:41 /dev/dm-1 brw-rw----. 1 root disk 253, 123 Sep 16 02:12 /dev/dm-123 brw-rw----. 1 root disk 253, 2 Sep 16 01:41 /dev/dm-2 brw-rw----. 1 root disk 253, 3 Sep 16 02:12 /dev/dm-3
# dmsetup table rhel-home: 0 344326144 linear 8:19 16345088 LVMTEST14781vg-foo: 0 1024 linear 253:3 2048 rhel-swap: 0 16343040 linear 8:19 2048 rhel-root: 0 104857600 linear 8:19 360671232 LVMTEST14781pv1: 0 69632 linear 1:0 0
I also use trace-cmd tool (command: trace-cmd record -p function -l '*dax*' -l '*dm_*' -l 'linear_*') to record the whole call path:
dm_get_md_type
dm_table_supports_dax
linear_iterate_devices
device_supports_dax
__generic_fsdax_supported (dax_dev is valid for dm-3)
dm_dax_direct_access
dax_get_private
dm_dax_get_live_target
dm_table_find_target
linear_dax_direct_access
bdev_dax_pgoff
dax_direct_access (dax_dev is NULL for physical device. Return -EOPNOTSUPP)
dm_dax_direct_access
dax_get_private
dm_dax_get_live_target
dm_table_find_target
linear_dax_direct_access
bdev_dax_pgoff
dax_direct_access (dax_dev is NULL for physical device. Return -EOPNOTSUPP)
Please find the attachment for the full log. You can see three dm_table_supports_dax() calls in the attachment, which aligns with the dmesg output (three dax error messages).
drivers/dax/super.c +6 -6
@@ -85,6 +85,12 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,return false; } +if (!dax_dev) { +pr_debug ("%s: error: dax unsupported by block device\n" , +bdevname (bdev, buf)); +return false; + } + err =bdev_dax_pgoff (bdev, start,PAGE_SIZE , &pgoff);if (err) { pr_info("%s: error: unaligned partition for dax\n",
@@ -100,12 +106,6 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,return false; } -if (!dax_dev || !bdev_dax_supported (bdev, blocksize)) { -pr_debug ("%s: error: dax unsupported by block device\n" , -bdevname (bdev, buf)); -return false; - } - id =dax_read_lock (); len =dax_direct_access (dax_dev, pgoff,1 , &kaddr, &pfn); len2 =dax_direct_access (dax_dev, pgoff_end,1 , &end_kaddr, &end_pfn);
-- Adrian
_______________________________________________
Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
Jan Kara
reviewerQuoted 12 lines · On Wed 16-09-20 07:02:12, Adrian Huang12 wrote:
Quoted 11 lines
-----Original Message-----
From: Jan Kara <[email protected]>I'm not sure how you can get
__generic_fsdax_supported()called for dm-0? Possibly because there's another dm device stacked on top of it anddm_table_supports_dax()callsgeneric_fsdax_supported()? That actually seems to be a bug indm_table_supports_dax()(device_supports_dax()in particular). I'd think it should be callingdax_supported()instead ofgeneric_fsdax_supported()so that proper device callback gets called when determining whether a device supports DAX or not.
Quoted 7 lines
Yes, you're right. There's another dm device stacked on top of it.
When applying the following patch and running 'lvm2-testsuite --only
activate-minor.sh', the following error messages are observed.dm-3: error: dax access failed (-95)
dm-3: error: dax access failed (-95)
dm-3: error: dax access failed (-95)
Right, and that's result of the problem I also describe above. Attached patch should fix these errors.
Honza
Signature · 2 lines
Jan Kara <[email protected]> SUSE Labs, CR
From edb67c5b213526a169c13cefbebc26b3ce8ad959 Mon Sep 17 00:00:00 2001
From: Jan Kara <[email protected]>
Date: Wed, 16 Sep 2020 13:08:44 +0200
Subject: [PATCH] dm: Call proper helper to determine dax support
DM was calling generic_fsdax_supported() to determine whether a device
referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that they don't have to duplicate common generic checks. High level code
should call dax_supported() helper which that calls into appropriate
helper for the particular device. This problem manifested itself as
kernel messages:
dm-3: error: dax access failed (-95)
when lvm2-testsuite run in cases where a DM device was stacked on top of another DM device.
--- drivers/dax/super.c | 1 + drivers/md/dm-table.c | 3 +-- include/linux/dax.h | 11 +++++++++-- 3 files changed, 11 insertions(+), 4 deletions(-)
drivers/dax/super.c +1 -0
@@ -330,6 +330,7 @@ bool dax_supported(struct dax_device *dax_dev, struct block_device *bdev,return dax_dev->ops->dax_supported (dax_dev, bdev, blocksize, start, len); } +EXPORT_SYMBOL_GPL (dax_supported);size_t dax_copy_from_iter (struct dax_device *dax_dev,pgoff_t pgoff,void *addr,size_t bytes,struct iov_iter *i)
drivers/md/dm-table.c +1 -2
@@ -862,8 +862,7 @@ int device_supports_dax(struct dm_target *ti, struct dm_dev *dev, {int blocksize = *(int *) data; -return generic_fsdax_supported (dev->dax_dev, dev->bdev, blocksize, - start, len); +return dax_supported (dev->dax_dev, dev->bdev, blocksize, start, len); }/* Check devices support synchronous DAX */
include/linux/dax.h +9 -2
@@ -130,6 +130,8 @@ static inline bool generic_fsdax_supported(struct dax_device *dax_dev,return __generic_fsdax_supported (dax_dev, bdev, blocksize, start, sectors); } +bool dax_supported (struct dax_device *dax_dev,struct block_device *bdev, +int blocksize,sector_t start,sector_t len);static inline void fs_put_dax (struct dax_device *dax_dev) {
@@ -157,6 +159,13 @@ static inline bool generic_fsdax_supported(struct dax_device *dax_dev,return false; } +static inline bool dax_supported (struct dax_device *dax_dev, +struct block_device *bdev,int blocksize,sector_t start, +sector_t len) +{ +return false; +} +static inline void fs_put_dax (struct dax_device *dax_dev) { }
@@ -195,8 +204,6 @@ bool dax_alive(struct dax_device *dax_dev);void *dax_get_private (struct dax_device *dax_dev);long dax_direct_access (struct dax_device *dax_dev,pgoff_t pgoff,long nr_pages,void **kaddr,pfn_t *pfn); -bool dax_supported (struct dax_device *dax_dev,struct block_device *bdev, -int blocksize,sector_t start,sector_t len);size_t dax_copy_from_iter (struct dax_device *dax_dev,pgoff_t pgoff,void *addr,size_t bytes,struct iov_iter *i); size_t dax_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
Signature · 1 line
2.16.4
_______________________________________________
Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
Adrian Huang12
Tested-byQuoted 10 lines
-----Original Message-----
From: Jan Kara <[email protected]>
Sent: Wednesday, September 16, 2020 7:19 PMQuoted 4 lines
dm-3: error: dax access failed (-95)
dm-3: error: dax access failed (-95)
dm-3: error: dax access failed (-95)Right, and that's result of the problem I also describe above. Attached patch should fix these errors.
The patch introduces the following panic during boot. Apparently, the dax_dev is NULL in dax_supported(). So, the address 0x00000000000002d0 is offset of the member 'flags' in struct dax_device (the member 'flags' is referenced in dax_alive()):
crash> struct dax_device -xo
struct dax_device {
[0x0] struct hlist_node list; [0x10] struct inode inode;
[0x258] struct cdev cdev;
[0x2c0] const char *host;
[0x2c8] void *private;
[0x2d0] unsigned long flags;
[0x2d8] const struct dax_operations *ops;
}
[ 30.551352] BUG: kernel NULL pointer dereference, address: 00000000000002d0 [ 30.568869] #PF: supervisor read access in kernel mode [ 30.588569] #PF: error_code(0x0000) - not-present page [ 30.602591] PGD 0 P4D 0 [ 30.612924] Oops: 0000 [#1] SMP NOPTI [ 30.627707] CPU: 198 PID: 2133 Comm: lvm Not tainted 5.9.0-rc5+ #21 [ 30.645862] Hardware name: Lenovo ThinkSystem SR665 MB/7D2WRCZ000, BIOS D8E105P-1.00 05/08/2020 [ 30.666245] RIP: 0010:dax_supported+0x5/0x30 [ 30.690943] Code: c7 50 49 7f 83 4c 0f 44 f0 4c 89 f2 e8 b4 ec e6 ff 48 c7 c2 ea ff ff ff e9 e8 fd ff ff e8 53 e2 2e 00 0f 1f 00 0f 1f 44 00 00 <48> 8b 87 d0 02 00 00 a8 01 74 10 48 8b 87 d8 02 00 00 48 8b 40 08 [ 30.737769] RSP: 0018:ffffaf660803bc98 EFLAGS: 00010246 [ 30.757840] RAX: ffffaf660803bcd8 RBX: 0000000000000000 RCX: 00000000157f6800 [ 30.776039] RDX: 0000000000001000 RSI: ffff8b862f677840 RDI: 0000000000000000 [ 30.800314] RBP: ffffffffc009c740 R08: 0000000006400000 R09: ffffffffc009c740 [ 30.818598] R10: ffffaf660471e0a0 R11: ffff8b8714d376ef R12: ffffaf660803bcd8 [ 30.835971] R13: ffff8b8ae0cb6800 R14: ffff8b8ad9a3c000 R15: 0000000000000001 [ 30.856943] FS: 00007f17e3c4c980(0000) GS:ffff8b8afeb80000(0000) knlGS:0000000000000000 [ 30.875594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 30.894763] CR2: 00000000000002d0 CR3: 00000008142dc000 CR4: 0000000000350ee0 [ 30.919656] Call Trace: [ 30.933808] device_supports_dax+0x1c/0x20 [dm_mod] [ 30.950784] dm_table_supports_dax+0x8d/0xb0 [dm_mod] [ 30.968326] dm_table_complete+0x309/0x670 [dm_mod] [ 30.984310] table_load+0x15b/0x2e0 [dm_mod] [ 31.001171] ? dev_status+0x40/0x40 [dm_mod] [ 31.018840] ctl_ioctl+0x1af/0x420 [dm_mod] [ 31.043825] dm_ctl_ioctl+0xa/0x10 [dm_mod] [ 31.059381] __x64_sys_ioctl+0x84/0xb1 [ 31.074755] do_syscall_64+0x33/0x40 [ 31.091368] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 31.111434] RIP: 0033:0x7f17e1e2987b [ 31.125175] Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48 [ 31.170194] RSP: 002b:00007ffca2dbcf88 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 31.193668] RAX: ffffffffffffffda RBX: 0000563b00467260 RCX: 00007f17e1e2987b [ 31.214773] RDX: 0000563b01b17290 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 31.236570] RBP: 0000563b005154fe R08: 0000000000000000 R09: 00007ffca2dbcdf0 [ 31.259426] R10: 0000563b00581ea3 R11: 0000000000000206 R12: 0000000000000000 [ 31.277578] R13: 0000563b01b172c0 R14: 0000563b01b17290 R15: 0000563b01311970 [ 31.302167] Modules linked in: sd_mod t10_pi sg crc32c_intel igb ahci libahci i2c_algo_bit libata dca pinctrl_amd dm_mirror dm_region_hash dm_log dm_mod [ 31.347549] CR2: 00000000000002d0
The following patch solves the panic. Feel free to add it to your patch.
BTW, feel free to add my tested-by to your patch after including the following patch to your patch (I don't see any dax error messages when running lvm2-testsuite).
Thanks for looking into the issue triggered by lvm2-testsuite.
drivers/dax/super.c +3 -0
@@ -325,6 +325,9 @@ EXPORT_SYMBOL_GPL(dax_direct_access);bool dax_supported (struct dax_device *dax_dev,struct block_device *bdev,int blocksize,sector_t start,sector_t len) { +if (!dax_dev) +return false; +if (!dax_alive (dax_dev))return false;
BTW, I just submitted the v2 version: https://lore.kernel.org/linux-nvdimm/[email protected]/T/#u
Hopefully/ideally, your patch and mine can be merged at the same rc release.
-- Adrian
_______________________________________________
Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]
Jan Kara
reviewerQuoted 8 lines · On Wed 16-09-20 14:02:19, Adrian Huang12 wrote:
Quoted 8 lines
-----Original Message-----
From: Jan Kara <[email protected]>
Sent: Wednesday, September 16, 2020 7:19 PMQuoted 4 lines
dm-3: error: dax access failed (-95)
dm-3: error: dax access failed (-95)
dm-3: error: dax access failed (-95)
Quoted 7 lines
Quoted 2 lines
Right, and that's result of the problem I also describe above. Attached patch should fix these errors.
The patch introduces the following panic during boot. Apparently, the
dax_devis NULL indax_supported(). So, the address0x00000000000002d0is offset of the member 'flags' in structdax_device(the member 'flags' is referenced indax_alive()):
Thanks for testing!
Quoted 1 line
The following patch solves the panic. Feel free to add it to your patch.
I've added you fixup to the patch. Thanks for it.
Quoted 22 lines
BTW, feel free to add my tested-by to your patch after including the following patch to your patch (I don't see any dax error messages when running lvm2-testsuite).
Tested-by Adrian Huang <[email protected]>Thanks for looking into the issue triggered by lvm2-testsuite.
drivers/dax/super.c +3
-0@@ -325,6 +325,9 @@ EXPORT_SYMBOL_GPL(dax_direct_access);bool dax_supported (struct dax_device *dax_dev,struct block_device *bdev,int blocksize,sector_t start,sector_t len) { +if (!dax_dev) +return false; +if (!dax_alive (dax_dev))return false;BTW, I just submitted the v2 version:
https://lore.kernel.org/linux-nvdimm/[email protected]/T/#u
Quoted 1 line
Hopefully/ideally, your patch and mine can be merged at the same rc release.
Yup, I'll send it rightaway.
Honza
Signature · 5 lines
Jan Kara <[email protected]> SUSE Labs, CR _______________________________________________ Linux-nvdimm mailing list -- [email protected] To unsubscribe send an email to [email protected]