phy: amlogic: add MIPI DSI function to analog MIPI+PCIe PHY
v2 cover phy: amlogic: add MIPI DSI function to analog MIPI+PCIe PHY
The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY, thus we need to have inclusive support for both interfaces at runtime.
This fixes the regmap get from parent node, removes cell param to select a mode and implement runtime configuration & power on/off for both functions since they are not exclusive.
Changes since v1 at [1]:
- added description to binding as requested parent
- updated commit log of patch 1
- also update example of patch 1
[1] https://lkml.kernel.org/r/[email protected]
Neil Armstrong (3):
dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: remove reg
attribute
dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: remove phy cell
parameter
phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI
analog
.../amlogic,meson-axg-mipi-pcie-analog.yaml | 21 +- drivers/phy/amlogic/Kconfig | 1 + .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------ 3 files changed, 149 insertions(+), 77 deletions(-)
Signature · 7 lines
2.22.0 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
PATCH v2 1/3 dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: remove reg attribute
The PHY registers happens to be at the beginning of a large zone containing interleaved system registers (mainly clocks, power management, PHY control..), found in all Amlogic SoC so far.
The goal is to model it the same way as the other "features" of this zone, like Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt and Documentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yaml and have a coherent bindings scheme over the Amlogic SoCs.
This update the description, removed the reg attribute then updates the example accordingly.
--- .../phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml +11 -6
@@ -9,27 +9,32 @@ title: Amlogic AXG shared MIPI/PCIE analog PHY maintainers: - Remi Pommarel <[email protected]> +description: |+ + The Everything-Else Power Domains node should be the child of a syscon + node with the required property: + + - compatible: Should be the following: + "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon" + + Refer to the the bindings described in + Documentation/devicetree/bindings/mfd/syscon.yaml + properties: compatible: const: amlogic,axg-mipi-pcie-analog-phy - reg: - maxItems: 1 - "#phy-cells": const: 1 required: - compatible - - reg - "#phy-cells" additionalProperties: false examples: - | - mpphy: phy@0 { + mpphy: phy { compatible = "amlogic,axg-mipi-pcie-analog-phy"; - reg = <0x0 0xc>; #phy-cells = <1>; };
Signature · 7 lines
2.22.0 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
Re: [PATCH v2 1/3] dt-bindings: phy: amlogic, meson-axg-mipi-pcie-analog: remove reg attribute
Quoted 9 lines · Neil Armstrong
The PHY registers happens to be at the beginning of a large zone containing interleaved system registers (mainly clocks, power management, PHY control..), found in all Amlogic SoC so far.
The goal is to model it the same way as the other "features" of this zone, like
Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txtandDocumentation/devicetree/bindings/power/amlogic,meson-ee-pwrc.yamland have a coherent bindings scheme over the Amlogic SoCs.
Quoted 8 lines
This update the description, removed the reg attribute then updates the example accordingly.
Signed-off-by Neil Armstrong <[email protected]>--- .../phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
PATCH v2 2/3 dt-bindings: phy: amlogic,meson-axg-mipi-pcie-analog: remove phy cell parameter
In reply to Neil ArmstrongThe Amlogic AXG MIPI + PCIe Analog PHY provides function for both PCIe and MIPI DSI at the same time, and is not exclusive.
Thus remove the invalid phy cell parameter.
--- .../bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml +2 -2
@@ -24,7 +24,7 @@ properties: const: amlogic,axg-mipi-pcie-analog-phy "#phy-cells": - const: 1 + const: 0 required: - compatible
@@ -36,5 +36,5 @@ examples: - | mpphy: phy { compatible = "amlogic,axg-mipi-pcie-analog-phy"; - #phy-cells = <1>; + #phy-cells = <0>; };
Signature · 7 lines
2.22.0 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
Re: [PATCH v2 2/3] dt-bindings: phy: amlogic, meson-axg-mipi-pcie-analog: remove phy cell parameter
Quoted 10 lines · Neil Armstrong
The Amlogic AXG MIPI + PCIe Analog PHY provides function for both PCIe and MIPI DSI at the same time, and is not exclusive.
Thus remove the invalid phy cell parameter.
Signed-off-by Neil Armstrong <[email protected]>--- .../bindings/phy/amlogic,meson-axg-mipi-pcie-analog.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
PATCH v2 3/3 phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog
In reply to Neil ArmstrongThe AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY, thus we need to have inclusive support for both interfaces at runtime.
This fixes the regmap get from parent node, removes cell param to select a mode and implement runtime configuration & power on/off for both functions since they are not exclusive.
--- drivers/phy/amlogic/Kconfig | 1 + .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------ 2 files changed, 136 insertions(+), 69 deletions(-)
drivers/phy/amlogic/Kconfig +1 -0
@@ -66,6 +66,7 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG depends on OF && (ARCH_MESON || COMPILE_TEST) select GENERIC_PHY select REGMAP_MMIO + select GENERIC_PHY_MIPI_DPHY help Enable this to support the Meson MIPI + PCIE analog PHY found in Meson AXG SoCs.
drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c +135 -69
289 lines not on this page · raw message
Signature · 7 lines
2.22.0 _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic
Re: [PATCH v2 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog
Hi Kishon,
Gentle ping.
Thanks,
Neil
Quoted 325 lines · Neil Armstrong
The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY, thus we need to have inclusive support for both interfaces at runtime.
This fixes the regmap get from parent node, removes cell param to select a mode and implement runtime configuration & power on/off for both functions since they are not exclusive.
Signed-off-by Neil Armstrong <[email protected]>Reviewed-by Remi Pommarel <[email protected]>--- drivers/phy/amlogic/Kconfig | 1 + .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------ 2 files changed, 136 insertions(+), 69 deletions(-)drivers/phy/amlogic/Kconfig +1
-0@@ -66,6 +66,7 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG depends on OF && (ARCH_MESON || COMPILE_TEST) select GENERIC_PHY select REGMAP_MMIO + select GENERIC_PHY_MIPI_DPHY help Enable this to support the Meson MIPI + PCIE analog PHY found in Meson AXG SoCs.drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c +135
-69@@ -4,9 +4,13 @@* * Copyright (C) 2019 Remi Pommarel <[email protected]> */ +#include <linux/bitfield.h> +#include <linux/bitops.h> #include <linux/module.h> #include <linux/phy/phy.h> #include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/mfd/syscon.h> #include <linux/platform_device.h> #include <dt-bindings/phy/phy.h> @@ -14,10 +18,10 @@#define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)#define HHI_MIPI_CNTL0_ENABLE BIT(29)#define HHI_MIPI_CNTL0_BANDGAP BIT(26) -#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12) -#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3) +#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(25, 16) +#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0) -#define HHI_MIPI_CNTL1 0x01 +#define HHI_MIPI_CNTL1 0x04#define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12)#define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4)#define HHI_MIPI_CNTL1_LP_RESISTER BIT(3)@@ -25,100 +29,170 @@#define HHI_MIPI_CNTL1_INPUT_SEL BIT(1)#define HHI_MIPI_CNTL1_PRBS7_EN BIT(0) -#define HHI_MIPI_CNTL2 0x02 +#define HHI_MIPI_CNTL2 0x08#define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25)#define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19)#define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18)#define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17)#define HHI_MIPI_CNTL2_LPULPS_EN BIT(16) -#define HHI_MIPI_CNTL2_CH_EN (n) BIT(15 - (n)) +#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)#define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1) +#define DSI_LANE_0 (1 << 4) +#define DSI_LANE_1 (1 << 3) +#define DSI_LANE_CLK (1 << 2) +#define DSI_LANE_2 (1 << 1) +#define DSI_LANE_3 (1 << 0) +#define DSI_LANE_MASK (0x1F) +struct phy_axg_mipi_pcie_analog_priv {struct phy *phy; -unsigned int mode;struct regmap *regmap; +bool dsi_configured; +bool dsi_enabled; +bool powered; +struct phy_configure_opts_mipi_dphy config; }; -static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = { - .reg_bits =8 , - .val_bits =32 , - .reg_stride =4 , - .max_register =HHI_MIPI_CNTL2 , -}; +static void phy_bandgap_enable (struct phy_axg_mipi_pcie_analog_priv *priv) +{ +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_BANDGAP ,HHI_MIPI_CNTL0_BANDGAP ); -static int phy_axg_mipi_pcie_analog_power_on (struct phy *phy) +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_ENABLE ,HHI_MIPI_CNTL0_ENABLE ); +} + +static void phy_bandgap_disable (struct phy_axg_mipi_pcie_analog_priv *priv) { -struct phy_axg_mipi_pcie_analog_priv *priv =phy_get_drvdata (phy); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_BANDGAP ,0 ); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_ENABLE ,0 ); +} -/* MIPI not supported yet */ -if (priv->mode !=PHY_TYPE_PCIE ) -return -EINVAL ; +static void phy_dsi_analog_enable (struct phy_axg_mipi_pcie_analog_priv *priv) +{ +u32 reg;regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , -HHI_MIPI_CNTL0_BANDGAP ,HHI_MIPI_CNTL0_BANDGAP ); +HHI_MIPI_CNTL0_DIF_REF_CTL1 , +FIELD_PREP (HHI_MIPI_CNTL0_DIF_REF_CTL1 ,0x1b8 )); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +BIT (31 ),BIT (31 )); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_DIF_REF_CTL0 , +FIELD_PREP (HHI_MIPI_CNTL0_DIF_REF_CTL0 ,0x8 )); + +regmap_write (priv->regmap,HHI_MIPI_CNTL1 ,0x001e ); + +regmap_write (priv->regmap,HHI_MIPI_CNTL2 , + (0x26e0 <<16 ) | (0x459 <<0 )); + + reg =DSI_LANE_CLK ; +switch (priv->config.lanes) { +case 4 : + reg |=DSI_LANE_3 ; + fallthrough; +case 3 : + reg |=DSI_LANE_2 ; + fallthrough; +case 2 : + reg |=DSI_LANE_1 ; + fallthrough; +case 1 : + reg |=DSI_LANE_0 ; +break ; +default : + reg =0 ; + } + +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL2 , +HHI_MIPI_CNTL2_CH_EN , +FIELD_PREP (HHI_MIPI_CNTL2_CH_EN , reg)); + + priv->dsi_enabled = true; +} +static void phy_dsi_analog_disable (struct phy_axg_mipi_pcie_analog_priv *priv) +{regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , -HHI_MIPI_CNTL0_ENABLE ,HHI_MIPI_CNTL0_ENABLE ); -return 0 ; +HHI_MIPI_CNTL0_DIF_REF_CTL1 , +FIELD_PREP (HHI_MIPI_CNTL0_DIF_REF_CTL1 ,0 )); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 ,BIT (31 ),0 ); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_DIF_REF_CTL1 ,0 ); + +regmap_write (priv->regmap,HHI_MIPI_CNTL1 ,0x6 ); + +regmap_write (priv->regmap,HHI_MIPI_CNTL2 ,0x00200000 ); + + priv->dsi_enabled = false; } -static int phy_axg_mipi_pcie_analog_power_off (struct phy *phy) +static int phy_axg_mipi_pcie_analog_configure (struct phy *phy, +union phy_configure_opts *opts) {struct phy_axg_mipi_pcie_analog_priv *priv =phy_get_drvdata (phy); +int ret; -/* MIPI not supported yet */ -if (priv->mode !=PHY_TYPE_PCIE ) -return -EINVAL ; + ret =phy_mipi_dphy_config_validate (&opts->mipi_dphy); +if (ret) +return ret; + +memcpy (&priv->config, opts,sizeof (priv->config)); + + priv->dsi_configured = true; + +/* If PHY was already powered on, setup the DSI analog part */ +if (priv->powered) { +/* If reconfiguring, disable & reconfigure */ +if (priv->dsi_enabled) +phy_dsi_analog_disable (priv); + +usleep_range (100 ,200 ); + +phy_dsi_analog_enable (priv); + } -regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , -HHI_MIPI_CNTL0_BANDGAP ,0 ); -regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , -HHI_MIPI_CNTL0_ENABLE ,0 );return 0 ; } -static int phy_axg_mipi_pcie_analog_init (struct phy *phy) +static int phy_axg_mipi_pcie_analog_power_on (struct phy *phy) { +struct phy_axg_mipi_pcie_analog_priv *priv =phy_get_drvdata (phy); + +phy_bandgap_enable (priv); + +if (priv->dsi_configured) +phy_dsi_analog_enable (priv); + + priv->powered = true; +return 0 ; } -static int phy_axg_mipi_pcie_analog_exit (struct phy *phy) +static int phy_axg_mipi_pcie_analog_power_off (struct phy *phy) { +struct phy_axg_mipi_pcie_analog_priv *priv =phy_get_drvdata (phy); + +phy_bandgap_disable (priv); + +if (priv->dsi_enabled) +phy_dsi_analog_disable (priv); + + priv->powered = false; +return 0 ; }static const struct phy_ops phy_axg_mipi_pcie_analog_ops = { - .init = phy_axg_mipi_pcie_analog_init, - .exit = phy_axg_mipi_pcie_analog_exit, + .configure = phy_axg_mipi_pcie_analog_configure, .power_on = phy_axg_mipi_pcie_analog_power_on, .power_off = phy_axg_mipi_pcie_analog_power_off, .owner =THIS_MODULE , }; -static struct phy *phy_axg_mipi_pcie_analog_xlate (struct device *dev, -struct of_phandle_args *args) -{ -struct phy_axg_mipi_pcie_analog_priv *priv =dev_get_drvdata (dev); -unsigned int mode; - -if (args->args_count !=1 ) { -dev_err (dev,"invalid number of arguments\n" ); -return ERR_PTR (-EINVAL ); - } - - mode = args->args[0 ]; - -/* MIPI mode is not supported yet */ -if (mode !=PHY_TYPE_PCIE ) { -dev_err (dev,"invalid phy mode select argument\n" ); -return ERR_PTR (-EINVAL ); - } - - priv->mode = mode; -return priv->phy; -} -static int phy_axg_mipi_pcie_analog_probe (struct platform_device *pdev) {struct phy_provider *phy;@@ -126,27 +200,20 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)struct phy_axg_mipi_pcie_analog_priv *priv;struct device_node *np = dev->of_node;struct regmap *map; -struct resource *res; -void __iomem *base;int ret; priv =devm_kmalloc (dev,sizeof (*priv),GFP_KERNEL );if (!priv)return -ENOMEM ; - res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); - base =devm_ioremap_resource (dev, res); -if (IS_ERR (base)) { -dev_err (dev,"failed to get regmap base\n" ); -return PTR_ERR (base); - } - - map =devm_regmap_init_mmio (dev, base, - &phy_axg_mipi_pcie_analog_regmap_conf); +/* Get the hhi system controller node */ + map =syscon_node_to_regmap (of_get_parent (dev->of_node));if (IS_ERR (map)) { -dev_err (dev,"failed to get HHI regmap\n" ); +dev_err (dev, +"failed to get HHI regmap\n" );return PTR_ERR (map); } + priv->regmap = map; priv->phy =devm_phy_create (dev, np, &phy_axg_mipi_pcie_analog_ops);@@ -160,8 +227,7 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)phy_set_drvdata (priv->phy, priv);dev_set_drvdata (dev, priv); - phy =devm_of_phy_provider_register (dev, - phy_axg_mipi_pcie_analog_xlate); + phy =devm_of_phy_provider_register (dev, of_phy_simple_xlate);return PTR_ERR_OR_ZERO (phy); }
Kevin Hilman
maintainerRe: [PATCH v2 3/3] phy: amlogic: phy-meson-axg-mipi-pcie-analog: add support for MIPI DSI analog
Hi Kishon,
It's been another few weeks, so another slightly less gentle ping. :)
Kevin
Quoted 333 lines · Neil Armstrong
Hi Kishon,
Gentle ping.
Thanks,
NeilQuoted 325 lines · Neil Armstrong
The AXG Analog MIPI-DSI PHY also provides functions to the PCIe PHY, thus we need to have inclusive support for both interfaces at runtime.
This fixes the regmap get from parent node, removes cell param to select a mode and implement runtime configuration & power on/off for both functions since they are not exclusive.
Signed-off-by Neil Armstrong <[email protected]>Reviewed-by Remi Pommarel <[email protected]>--- drivers/phy/amlogic/Kconfig | 1 + .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 204 ++++++++++++------ 2 files changed, 136 insertions(+), 69 deletions(-)drivers/phy/amlogic/Kconfig +1
-0@@ -66,6 +66,7 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG depends on OF && (ARCH_MESON || COMPILE_TEST) select GENERIC_PHY select REGMAP_MMIO + select GENERIC_PHY_MIPI_DPHY help Enable this to support the Meson MIPI + PCIE analog PHY found in Meson AXG SoCs.drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c +135
-69@@ -4,9 +4,13 @@* * Copyright (C) 2019 Remi Pommarel <[email protected]> */ +#include <linux/bitfield.h> +#include <linux/bitops.h> #include <linux/module.h> #include <linux/phy/phy.h> #include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/mfd/syscon.h> #include <linux/platform_device.h> #include <dt-bindings/phy/phy.h> @@ -14,10 +18,10 @@#define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)#define HHI_MIPI_CNTL0_ENABLE BIT(29)#define HHI_MIPI_CNTL0_BANDGAP BIT(26) -#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12) -#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3) +#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(25, 16) +#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0) -#define HHI_MIPI_CNTL1 0x01 +#define HHI_MIPI_CNTL1 0x04#define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12)#define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4)#define HHI_MIPI_CNTL1_LP_RESISTER BIT(3)@@ -25,100 +29,170 @@#define HHI_MIPI_CNTL1_INPUT_SEL BIT(1)#define HHI_MIPI_CNTL1_PRBS7_EN BIT(0) -#define HHI_MIPI_CNTL2 0x02 +#define HHI_MIPI_CNTL2 0x08#define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25)#define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19)#define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18)#define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17)#define HHI_MIPI_CNTL2_LPULPS_EN BIT(16) -#define HHI_MIPI_CNTL2_CH_EN (n) BIT(15 - (n)) +#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)#define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1) +#define DSI_LANE_0 (1 << 4) +#define DSI_LANE_1 (1 << 3) +#define DSI_LANE_CLK (1 << 2) +#define DSI_LANE_2 (1 << 1) +#define DSI_LANE_3 (1 << 0) +#define DSI_LANE_MASK (0x1F) +struct phy_axg_mipi_pcie_analog_priv {struct phy *phy; -unsigned int mode;struct regmap *regmap; +bool dsi_configured; +bool dsi_enabled; +bool powered; +struct phy_configure_opts_mipi_dphy config; }; -static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = { - .reg_bits =8 , - .val_bits =32 , - .reg_stride =4 , - .max_register =HHI_MIPI_CNTL2 , -}; +static void phy_bandgap_enable (struct phy_axg_mipi_pcie_analog_priv *priv) +{ +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_BANDGAP ,HHI_MIPI_CNTL0_BANDGAP ); -static int phy_axg_mipi_pcie_analog_power_on (struct phy *phy) +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_ENABLE ,HHI_MIPI_CNTL0_ENABLE ); +} + +static void phy_bandgap_disable (struct phy_axg_mipi_pcie_analog_priv *priv) { -struct phy_axg_mipi_pcie_analog_priv *priv =phy_get_drvdata (phy); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_BANDGAP ,0 ); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_ENABLE ,0 ); +} -/* MIPI not supported yet */ -if (priv->mode !=PHY_TYPE_PCIE ) -return -EINVAL ; +static void phy_dsi_analog_enable (struct phy_axg_mipi_pcie_analog_priv *priv) +{ +u32 reg;regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , -HHI_MIPI_CNTL0_BANDGAP ,HHI_MIPI_CNTL0_BANDGAP ); +HHI_MIPI_CNTL0_DIF_REF_CTL1 , +FIELD_PREP (HHI_MIPI_CNTL0_DIF_REF_CTL1 ,0x1b8 )); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +BIT (31 ),BIT (31 )); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_DIF_REF_CTL0 , +FIELD_PREP (HHI_MIPI_CNTL0_DIF_REF_CTL0 ,0x8 )); + +regmap_write (priv->regmap,HHI_MIPI_CNTL1 ,0x001e ); + +regmap_write (priv->regmap,HHI_MIPI_CNTL2 , + (0x26e0 <<16 ) | (0x459 <<0 )); + + reg =DSI_LANE_CLK ; +switch (priv->config.lanes) { +case 4 : + reg |=DSI_LANE_3 ; + fallthrough; +case 3 : + reg |=DSI_LANE_2 ; + fallthrough; +case 2 : + reg |=DSI_LANE_1 ; + fallthrough; +case 1 : + reg |=DSI_LANE_0 ; +break ; +default : + reg =0 ; + } + +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL2 , +HHI_MIPI_CNTL2_CH_EN , +FIELD_PREP (HHI_MIPI_CNTL2_CH_EN , reg)); + + priv->dsi_enabled = true; +} +static void phy_dsi_analog_disable (struct phy_axg_mipi_pcie_analog_priv *priv) +{regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , -HHI_MIPI_CNTL0_ENABLE ,HHI_MIPI_CNTL0_ENABLE ); -return 0 ; +HHI_MIPI_CNTL0_DIF_REF_CTL1 , +FIELD_PREP (HHI_MIPI_CNTL0_DIF_REF_CTL1 ,0 )); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 ,BIT (31 ),0 ); +regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , +HHI_MIPI_CNTL0_DIF_REF_CTL1 ,0 ); + +regmap_write (priv->regmap,HHI_MIPI_CNTL1 ,0x6 ); + +regmap_write (priv->regmap,HHI_MIPI_CNTL2 ,0x00200000 ); + + priv->dsi_enabled = false; } -static int phy_axg_mipi_pcie_analog_power_off (struct phy *phy) +static int phy_axg_mipi_pcie_analog_configure (struct phy *phy, +union phy_configure_opts *opts) {struct phy_axg_mipi_pcie_analog_priv *priv =phy_get_drvdata (phy); +int ret; -/* MIPI not supported yet */ -if (priv->mode !=PHY_TYPE_PCIE ) -return -EINVAL ; + ret =phy_mipi_dphy_config_validate (&opts->mipi_dphy); +if (ret) +return ret; + +memcpy (&priv->config, opts,sizeof (priv->config)); + + priv->dsi_configured = true; + +/* If PHY was already powered on, setup the DSI analog part */ +if (priv->powered) { +/* If reconfiguring, disable & reconfigure */ +if (priv->dsi_enabled) +phy_dsi_analog_disable (priv); + +usleep_range (100 ,200 ); + +phy_dsi_analog_enable (priv); + } -regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , -HHI_MIPI_CNTL0_BANDGAP ,0 ); -regmap_update_bits (priv->regmap,HHI_MIPI_CNTL0 , -HHI_MIPI_CNTL0_ENABLE ,0 );return 0 ; } -static int phy_axg_mipi_pcie_analog_init (struct phy *phy) +static int phy_axg_mipi_pcie_analog_power_on (struct phy *phy) { +struct phy_axg_mipi_pcie_analog_priv *priv =phy_get_drvdata (phy); + +phy_bandgap_enable (priv); + +if (priv->dsi_configured) +phy_dsi_analog_enable (priv); + + priv->powered = true; +return 0 ; } -static int phy_axg_mipi_pcie_analog_exit (struct phy *phy) +static int phy_axg_mipi_pcie_analog_power_off (struct phy *phy) { +struct phy_axg_mipi_pcie_analog_priv *priv =phy_get_drvdata (phy); + +phy_bandgap_disable (priv); + +if (priv->dsi_enabled) +phy_dsi_analog_disable (priv); + + priv->powered = false; +return 0 ; }static const struct phy_ops phy_axg_mipi_pcie_analog_ops = { - .init = phy_axg_mipi_pcie_analog_init, - .exit = phy_axg_mipi_pcie_analog_exit, + .configure = phy_axg_mipi_pcie_analog_configure, .power_on = phy_axg_mipi_pcie_analog_power_on, .power_off = phy_axg_mipi_pcie_analog_power_off, .owner =THIS_MODULE , }; -static struct phy *phy_axg_mipi_pcie_analog_xlate (struct device *dev, -struct of_phandle_args *args) -{ -struct phy_axg_mipi_pcie_analog_priv *priv =dev_get_drvdata (dev); -unsigned int mode; - -if (args->args_count !=1 ) { -dev_err (dev,"invalid number of arguments\n" ); -return ERR_PTR (-EINVAL ); - } - - mode = args->args[0 ]; - -/* MIPI mode is not supported yet */ -if (mode !=PHY_TYPE_PCIE ) { -dev_err (dev,"invalid phy mode select argument\n" ); -return ERR_PTR (-EINVAL ); - } - - priv->mode = mode; -return priv->phy; -} -static int phy_axg_mipi_pcie_analog_probe (struct platform_device *pdev) {struct phy_provider *phy;@@ -126,27 +200,20 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)struct phy_axg_mipi_pcie_analog_priv *priv;struct device_node *np = dev->of_node;struct regmap *map; -struct resource *res; -void __iomem *base;int ret; priv =devm_kmalloc (dev,sizeof (*priv),GFP_KERNEL );if (!priv)return -ENOMEM ; - res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); - base =devm_ioremap_resource (dev, res); -if (IS_ERR (base)) { -dev_err (dev,"failed to get regmap base\n" ); -return PTR_ERR (base); - } - - map =devm_regmap_init_mmio (dev, base, - &phy_axg_mipi_pcie_analog_regmap_conf); +/* Get the hhi system controller node */ + map =syscon_node_to_regmap (of_get_parent (dev->of_node));if (IS_ERR (map)) { -dev_err (dev,"failed to get HHI regmap\n" ); +dev_err (dev, +"failed to get HHI regmap\n" );return PTR_ERR (map); } + priv->regmap = map; priv->phy =devm_phy_create (dev, np, &phy_axg_mipi_pcie_analog_ops);@@ -160,8 +227,7 @@ static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)phy_set_drvdata (priv->phy, priv);dev_set_drvdata (dev, priv); - phy =devm_of_phy_provider_register (dev, - phy_axg_mipi_pcie_analog_xlate); + phy =devm_of_phy_provider_register (dev, of_phy_simple_xlate);return PTR_ERR_OR_ZERO (phy); }