arm64: dts: qcom: msm8996: Add VFE1_GDSC power domain to camss node
PATCH 1/1 arm64: dts: qcom: msm8996: Add VFE1_GDSC power domain to camss node
As the MSM8996 has two VFE IP-blocks, and each has a power domain, both of them have to be enabled. Previously only the power domain of VFE0 was enabled, but not the domain for VFE1.
This patch adds the VFE1_GDSC power domain to the camss device tree node of the MSM8996 soc.
Signed-off-by Robert Foss <[email protected]>
--- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/msm8996.dtsi +2 -1
@@ -1009,7 +1009,8 @@ camss: camss@a00000 { "ispif", "vfe0", "vfe1"; - power-domains = <&mmcc VFE0_GDSC>; + power-domains = <&mmcc VFE0_GDSC>, + <&mmcc VFE1_GDSC>; clocks = <&mmcc CAMSS_TOP_AHB_CLK>, <&mmcc CAMSS_ISPIF_AHB_CLK>, <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
Signature · 1 line
2.25.1
Quoted 17 lines · Robert Foss
As the MSM8996 has two VFE IP-blocks, and each has a power domain, both of them have to be enabled. Previously only the power domain of VFE0 was enabled, but not the domain for VFE1.
This patch adds the
VFE1_GDSCpower domain to the camss device tree node of the MSM8996 soc.Signed-off-by Robert Foss <[email protected]>--- arch/arm64/boot/dts/qcom/msm8996.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)arch/arm64/boot/dts/qcom/msm8996.dtsi +0
-0
arch/arm64/boot/dts/qcom/msm8996.dtsi camss: camss@a00000 { · line 1013
Quoted 6 lines
arch/arm64/boot/dts/qcom/msm8996.dtsi +2
-1@@ -1009,7 +1009,8 @@ camss: camss@a00000 { "ispif", "vfe0", "vfe1"; - power-domains = <&mmcc VFE0_GDSC>; + power-domains = <&mmcc VFE0_GDSC>, + <&mmcc VFE1_GDSC>;
Fixed the indentation and applied this.
Thanks,
Bjorn
Quoted 6 lines
arch/arm64/boot/dts/qcom/msm8996.dtsi +0
-0clocks = <&mmcc CAMSS_TOP_AHB_CLK>, <&mmcc CAMSS_ISPIF_AHB_CLK>, <&mmcc CAMSS_CSI0PHYTIMER_CLK>,Signature · 1 line
2.25.1