Skip to contentSkip to conversation

acl: introduce AVX512 classify method

PATCH Superseded Konstantin Ananyev 8 participants 70 messages Aug 7, 2020 – Oct 16, 2020 Arm/Amlogic Meson SoC support

lore
Share & tools
lore
#0 lore raw

cover acl: introduce AVX512 classify method

These patch series introduce support of AVX512 specific classify implementation for ACL library.
Inside it contains two code-paths –
one uses mostly 256 bit instruction/registers and can process up to 16 flows in parallel.
second uses 512 bit instruction/registers over majority of places and can process up to 32 flows in parallel. These internal code-path selection is done internally based on input burst size and is totally opaque to the user. On my SKX box test-acl shows ~20-65% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512 classify algorithms.

Note that this change introduce a formal ABI incompatibility with previous versions of ACL library.

TODO list:
- Deduplicate 8/16 code paths
- Update default algorithm selection
- Update docs

These patch series depends on:
https://patches.dpdk.org/patch/70429/
to be applied first.

Konstantin Ananyev (7):
acl: fix x86 build when compiler doesn't support AVX2 app/acl: few small improvements
acl: remove of unused enum value
acl: add infrastructure to support AVX512 classify app/acl: add AVX512 classify support
acl: introduce AVX512 classify implementation
acl: enhance AVX512 classify implementation

 app/test-acl/main.c                |  19 +-
 config/x86/meson.build             |   3 +-
 lib/librte_acl/Makefile            |  26 ++
 lib/librte_acl/acl.h               |   4 +
 lib/librte_acl/acl_run_avx512.c    | 140 +++++++
 lib/librte_acl/acl_run_avx512x16.h | 635 +++++++++++++++++++++++++++++
 lib/librte_acl/acl_run_avx512x8.h  | 614 ++++++++++++++++++++++++++++
 lib/librte_acl/meson.build         |  39 ++
 lib/librte_acl/rte_acl.c           |  19 +-
 lib/librte_acl/rte_acl.h           |   2 +-
 10 files changed, 1493 insertions(+), 8 deletions(-)
 create mode 100644 lib/librte_acl/acl_run_avx512.c
 create mode 100644 lib/librte_acl/acl_run_avx512x16.h
 create mode 100644 lib/librte_acl/acl_run_avx512x8.h
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/7 acl: fix x86 build when compiler doesn't support AVX2

Right now we define dummy version of rte_acl_classify_avx2() when both X86 and AVX2 are not detected, though it should be for non-AVX2 case only.

Fixes e53ce4e41379 ("acl: remove use of weak functions")
---
 lib/librte_acl/rte_acl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/librte_acl/rte_acl.c +1 -1
index 777ec4d34..715b02359 100644
@@ -16,7 +16,6 @@ static struct rte_tailq_elem rte_acl_tailq = {
 };
 EAL_REGISTER_TAILQ(rte_acl_tailq)
 
-#ifndef RTE_ARCH_X86
 #ifndef CC_AVX2_SUPPORT
 /*
  * If the compiler doesn't support AVX2 instructions,
@@ -33,6 +32,7 @@ rte_acl_classify_avx2(__rte_unused const struct rte_acl_ctx *ctx,
 }
 #endif
 
+#ifndef RTE_ARCH_X86
 int
 rte_acl_classify_sse(__rte_unused const struct rte_acl_ctx *ctx,
 	__rte_unused const uint8_t **data,
Signature · 1 line
2.17.1
#2 lore raw

PATCH 2/7 app/acl: few small improvements

In reply to Konstantin Ananyev

- enhance output to print extra stats
- use rte_rdtsc_precise() for cycle measurements

---
 app/test-acl/main.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
app/test-acl/main.c +10 -5
index 0a5dfb621..d9b65517c 100644
@@ -862,9 +862,10 @@ search_ip5tuples(__rte_unused void *arg)
 {
 	uint64_t pkt, start, tm;
 	uint32_t i, lcore;
+	long double st;
 
 	lcore = rte_lcore_id();
-	start = rte_rdtsc();
+	start = rte_rdtsc_precise();
 	pkt = 0;
 
 	for (i = 0; i != config.iter_num; i++) {
@@ -872,12 +873,16 @@ search_ip5tuples(__rte_unused void *arg)
 			config.trace_step, config.alg.name);
 	}
 
-	tm = rte_rdtsc() - start;
+	tm = rte_rdtsc_precise() - start;
+
+	st = (long double)tm / rte_get_timer_hz();
 	dump_verbose(DUMP_NONE, stdout,
 		"%s  @lcore %u: %" PRIu32 " iterations, %" PRIu64 " pkts, %"
-		PRIu32 " categories, %" PRIu64 " cycles, %#Lf cycles/pkt\n",
-		__func__, lcore, i, pkt, config.run_categories,
-		tm, (pkt == 0) ? 0 : (long double)tm / pkt);
+		PRIu32 " categories, %" PRIu64 " cycles (%.2Lf sec), "
+		"%.2Lf cycles/pkt, %.2Lf pkt/sec\n",
+		__func__, lcore, i, pkt,
+		config.run_categories, tm, st,
+		(pkt == 0) ? 0 : (long double)tm / pkt, pkt / st);
 
 	return 0;
 }
Signature · 1 line
2.17.1
#3 lore raw

PATCH 3/7 acl: remove of unused enum value

In reply to Konstantin Ananyev

Removal of unused enum value (RTE_ACL_CLASSIFY_NUM). This enum value is not used inside DPDK, while it prevents to add new classify algorithms without causing an ABI breakage.

Note that this change introduce a formal ABI incompatibility with previous versions of ACL library.

---
 lib/librte_acl/rte_acl.h | 1 -
 1 file changed, 1 deletion(-)
lib/librte_acl/rte_acl.h +0 -1
index aa22e70c6..b814423a6 100644
@@ -241,7 +241,6 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
-	RTE_ACL_CLASSIFY_NUM          /* should always be the last one. */
 };
 
 /**
Signature · 1 line
2.17.1
#4 lore raw

PATCH 4/7 acl: add infrastructure to support AVX512 classify

In reply to Konstantin Ananyev

Add necessary changes to support new AVX512 specific ACL classify algorithm:
- changes in meson.build and Makefile to check that build tools (compiler, assembler, etc.) do properly support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512 implementation couldn't be properly supported.

---
 config/x86/meson.build          |  3 ++-
 lib/librte_acl/Makefile         | 26 ++++++++++++++++++++++
 lib/librte_acl/acl.h            |  4 ++++
 lib/librte_acl/acl_run_avx512.c | 17 ++++++++++++++
 lib/librte_acl/meson.build      | 39 +++++++++++++++++++++++++++++++++
 lib/librte_acl/rte_acl.c        | 17 ++++++++++++++
 lib/librte_acl/rte_acl.h        |  1 +
 7 files changed, 106 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512.c
config/x86/meson.build +2 -1
index 6ec020ef6..c5626e914 100644
@@ -23,7 +23,8 @@ foreach f:base_flags
 endforeach
 
 optional_flags = ['AES', 'PCLMUL',
-		'AVX', 'AVX2', 'AVX512F',
+		'AVX', 'AVX2',
+		'AVX512F', 'AVX512VL', 'AVX512CD', 'AVX512BW',
 		'RDRND', 'RDSEED']
 foreach f:optional_flags
 	if cc.get_define('__@0@__'.format(f), args: machine_args) == '1'
lib/librte_acl/Makefile +26 -0
index f4332b044..8bd469c2b 100644
@@ -58,6 +58,32 @@ ifeq ($(CC_AVX2_SUPPORT), 1)
 	CFLAGS_rte_acl.o += -DCC_AVX2_SUPPORT
 endif
 
+# compile AVX512 version if:
+# we are building 64-bit binary AND binutils can generate proper code
+ifeq ($(CONFIG_RTE_ARCH_X86_64),y)
+
+	BINUTIL_OK=$(shell AS=as; \
+		$(RTE_SDK)/buildtools/binutils-avx512-check.sh && \
+		echo 1)
+	ifeq ($(BINUTIL_OK), 1)
+
+		# If the compiler supports AVX512 instructions,
+		# then add support for AVX512 classify method.
+
+		CC_AVX512_FLAGS=$(shell $(CC) \
+		-mavx512f -mavx512vl -mavx512cd -mavx512bw \
+		-dM -E - </dev/null 2>&1 | grep AVX512 | wc -l)
+		ifeq ($(CC_AVX512_FLAGS), 4)
+			CFLAGS_acl_run_avx512.o += -mavx512f
+			CFLAGS_acl_run_avx512.o += -mavx512vl
+			CFLAGS_acl_run_avx512.o += -mavx512cd
+			CFLAGS_acl_run_avx512.o += -mavx512bw
+			SRCS-$(CONFIG_RTE_LIBRTE_ACL) += acl_run_avx512.c
+			CFLAGS_rte_acl.o += -DCC_AVX512_SUPPORT
+		endif
+	endif
+endif
+
 # install this header file
 SYMLINK-$(CONFIG_RTE_LIBRTE_ACL)-include := rte_acl_osdep.h
 SYMLINK-$(CONFIG_RTE_LIBRTE_ACL)-include += rte_acl.h
lib/librte_acl/acl.h +4 -0
index 39d45a0c2..2022cf253 100644
@@ -201,6 +201,10 @@ int
 rte_acl_classify_avx2(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories);
 
+int
+rte_acl_classify_avx512(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories);
+
 int
 rte_acl_classify_neon(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories);
lib/librte_acl/acl_run_avx512.c new file +17 -0
new file mode 100644
index 000000000..67274989d
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#include "acl_run_sse.h"
+
+int
+rte_acl_classify_avx512(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories)
+{
+	if (num >= MAX_SEARCHES_SSE8)
+		return search_sse_8(ctx, data, results, num, categories);
+	if (num >= MAX_SEARCHES_SSE4)
+		return search_sse_4(ctx, data, results, num, categories);
+
+	return rte_acl_classify_scalar(ctx, data, results, num, categories);
+}
lib/librte_acl/meson.build +39 -0
index d1e2c184c..b2fd61cad 100644
@@ -27,6 +27,45 @@ if dpdk_conf.has('RTE_ARCH_X86')
 		cflags += '-DCC_AVX2_SUPPORT'
 	endif
 
+	# compile AVX512 version if:
+	# we are building 64-bit binary AND binutils can generate proper code
+
+	if dpdk_conf.has('RTE_ARCH_X86_64') and binutils_ok.returncode() == 0
+
+		# compile AVX512 version if either:
+		# a. we have AVX512 supported in minimum instruction set
+		#    baseline
+		# b. it's not minimum instruction set, but supported by
+		#    compiler
+		#
+		# in former case, just add avx512 C file to files list
+		# in latter case, compile c file to static lib, using correct
+		# compiler flags, and then have the .o file from static lib
+		# linked into main lib.
+
+		if dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512F') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512VL') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512CD') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512BW')
+
+			sources += files('acl_run_avx512.c')
+			cflags += '-DCC_AVX512_SUPPORT'
+
+		elif cc.has_multi_arguments('-mavx512f', '-mavx512vl',
+					'-mavx512cd', '-mavx512bw')
+
+			avx512_tmplib = static_library('avx512_tmp',
+				'acl_run_avx512.c',
+				dependencies: static_rte_eal,
+				c_args: cflags +
+					['-mavx512f', '-mavx512vl',
+					 '-mavx512cd', '-mavx512bw'])
+			objs += avx512_tmplib.extract_objects(
+					'acl_run_avx512.c')
+			cflags += '-DCC_AVX512_SUPPORT'
+		endif
+	endif
+
 elif dpdk_conf.has('RTE_ARCH_ARM') or dpdk_conf.has('RTE_ARCH_ARM64')
 	cflags += '-flax-vector-conversions'
 	sources += files('acl_run_neon.c')
lib/librte_acl/rte_acl.c +17 -0
index 715b02359..71b4afb08 100644
@@ -16,6 +16,22 @@ static struct rte_tailq_elem rte_acl_tailq = {
 };
 EAL_REGISTER_TAILQ(rte_acl_tailq)
 
+#ifndef CC_AVX512_SUPPORT
+/*
+ * If the compiler doesn't support AVX512 instructions,
+ * then the dummy one would be used instead for AVX512 classify method.
+ */
+int
+rte_acl_classify_avx512(__rte_unused const struct rte_acl_ctx *ctx,
+	__rte_unused const uint8_t **data,
+	__rte_unused uint32_t *results,
+	__rte_unused uint32_t num,
+	__rte_unused uint32_t categories)
+{
+	return -ENOTSUP;
+}
+#endif
+
 #ifndef CC_AVX2_SUPPORT
 /*
  * If the compiler doesn't support AVX2 instructions,
@@ -77,6 +93,7 @@ static const rte_acl_classify_t classify_fns[] = {
 	[RTE_ACL_CLASSIFY_AVX2] = rte_acl_classify_avx2,
 	[RTE_ACL_CLASSIFY_NEON] = rte_acl_classify_neon,
 	[RTE_ACL_CLASSIFY_ALTIVEC] = rte_acl_classify_altivec,
+	[RTE_ACL_CLASSIFY_AVX512] = rte_acl_classify_avx512,
 };
 
 /* by default, use always available scalar code path. */
lib/librte_acl/rte_acl.h +1 -0
index b814423a6..6f39042fc 100644
@@ -241,6 +241,7 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
+	RTE_ACL_CLASSIFY_AVX512 = 6,    /**< requires AVX512 support. */
 };
 
 /**
Signature · 1 line
2.17.1
#5 lore raw

PATCH 5/7 app/acl: add AVX512 classify support

In reply to Konstantin Ananyev

Add ability to use AVX512 classify method.

---
 app/test-acl/main.c | 4 ++++
 1 file changed, 4 insertions(+)
app/test-acl/main.c +4 -0
index d9b65517c..19b714335 100644
@@ -81,6 +81,10 @@ static const struct acl_alg acl_alg[] = {
 		.name = "altivec",
 		.alg = RTE_ACL_CLASSIFY_ALTIVEC,
 	},
+	{
+		.name = "avx512",
+		.alg = RTE_ACL_CLASSIFY_AVX512,
+	},
 };
 
 static struct {
Signature · 1 line
2.17.1
#6 lore raw

PATCH 6/7 acl: introduce AVX512 classify implementation

In reply to Konstantin Ananyev

Add search_avx512x8x2() which uses mostly 256-bit width registers/instructions and is able to process up to 16 flows in parallel.

---
 lib/librte_acl/acl_run_avx512.c   | 120 ++++++
 lib/librte_acl/acl_run_avx512x8.h | 614 ++++++++++++++++++++++++++++++
 2 files changed, 734 insertions(+)
 create mode 100644 lib/librte_acl/acl_run_avx512x8.h
lib/librte_acl/acl_run_avx512.c +120 -0
index 67274989d..8ee996679 100644
@@ -4,10 +4,130 @@
 
 #include "acl_run_sse.h"
 
+/*sizeof(uint32_t) << match_log == sizeof(struct rte_acl_match_results)*/
+static const uint32_t match_log = 5;
+
+struct acl_flow_avx512 {
+	uint32_t num_packets;       /* number of packets processed */
+	uint32_t total_packets;     /* max number of packets to process */
+	uint32_t root_index;        /* current root index */
+	const uint64_t *trans;      /* transition table */
+	const uint32_t *data_index; /* input data indexes */
+	const uint8_t **idata;      /* input data */
+	uint32_t *matches;          /* match indexes */
+};
+
+static inline void
+acl_set_flow_avx512(struct acl_flow_avx512 *flow, const struct rte_acl_ctx *ctx,
+	uint32_t trie, const uint8_t *data[], uint32_t *matches,
+	uint32_t total_packets)
+{
+	flow->num_packets = 0;
+	flow->total_packets = total_packets;
+	flow->root_index = ctx->trie[trie].root_index;
+	flow->trans = ctx->trans_table;
+	flow->data_index = ctx->trie[trie].data_index;
+	flow->idata = data;
+	flow->matches = matches;
+}
+
+/*
+ * Resolve matches for multiple categories (LE 8, use 128b instuctions/regs)
+ */
+static inline void
+resolve_mcle8_avx512x1(uint32_t result[],
+	const struct rte_acl_match_results pr[], const uint32_t match[],
+	uint32_t nb_pkt, uint32_t nb_cat, uint32_t nb_trie)
+{
+	const int32_t *pri;
+	const uint32_t *pm, *res;
+	uint32_t i, j, k, mi, mn;
+	__mmask8 msk;
+	xmm_t cp, cr, np, nr;
+
+	res = pr->results;
+	pri = pr->priority;
+
+	for (k = 0; k != nb_pkt; k++, result += nb_cat) {
+
+		mi = match[k] << match_log;
+
+		for (j = 0; j != nb_cat; j += RTE_ACL_RESULTS_MULTIPLIER) {
+
+			cr = _mm_loadu_si128((const xmm_t *)(res + mi + j));
+			cp = _mm_loadu_si128((const xmm_t *)(pri + mi + j));
+
+			for (i = 1, pm = match + nb_pkt; i != nb_trie;
+				i++, pm += nb_pkt) {
+
+				mn = j + (pm[k] << match_log);
+
+				nr = _mm_loadu_si128((const xmm_t *)(res + mn));
+				np = _mm_loadu_si128((const xmm_t *)(pri + mn));
+
+				msk = _mm_cmpgt_epi32_mask(cp, np);
+				cr = _mm_mask_mov_epi32(nr, msk, cr);
+				cp = _mm_mask_mov_epi32(np, msk, cp);
+			}
+
+			_mm_storeu_si128((xmm_t *)(result + j), cr);
+		}
+	}
+}
+
+/*
+ * Resolve matches for multiple categories (GT 8, use 512b instuctions/regs)
+ */
+static inline void
+resolve_mcgt8_avx512x1(uint32_t result[],
+	const struct rte_acl_match_results pr[], const uint32_t match[],
+	uint32_t nb_pkt, uint32_t nb_cat, uint32_t nb_trie)
+{
+	const int32_t *pri;
+	const uint32_t *pm, *res;
+	uint32_t i, k, mi;
+	__mmask16 cm, sm;
+	__m512i cp, cr, np, nr;
+
+	const uint32_t match_log = 5;
+
+	res = pr->results;
+	pri = pr->priority;
+
+	cm = (1 << nb_cat) - 1;
+
+	for (k = 0; k != nb_pkt; k++, result += nb_cat) {
+
+		mi = match[k] << match_log;
+
+		cr = _mm512_maskz_loadu_epi32(cm, res + mi);
+		cp = _mm512_maskz_loadu_epi32(cm, pri + mi);
+
+		for (i = 1, pm = match + nb_pkt; i != nb_trie;
+				i++, pm += nb_pkt) {
+
+			mi = pm[k] << match_log;
+
+			nr = _mm512_maskz_loadu_epi32(cm, res + mi);
+			np = _mm512_maskz_loadu_epi32(cm, pri + mi);
+
+			sm = _mm512_cmpgt_epi32_mask(cp, np);
+			cr = _mm512_mask_mov_epi32(nr, sm, cr);
+			cp = _mm512_mask_mov_epi32(np, sm, cp);
+		}
+
+		_mm512_mask_storeu_epi32(result, cm, cr);
+	}
+}
+
+#include "acl_run_avx512x8.h"
+
 int
 rte_acl_classify_avx512(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories)
 {
+	if (num >= MAX_SEARCHES_AVX16)
+		return search_avx512x8x2(ctx, data, results, num, categories);
 	if (num >= MAX_SEARCHES_SSE8)
 		return search_sse_8(ctx, data, results, num, categories);
 	if (num >= MAX_SEARCHES_SSE4)
lib/librte_acl/acl_run_avx512x8.h new file +614 -0

614 lines not on this page · raw message

Signature · 1 line
2.17.1
#7 lore raw

PATCH 7/7 acl: enhance AVX512 classify implementation

In reply to Konstantin Ananyev

Add search_avx512x16x2() which uses mostly 512-bit width registers/instructions and is able to process up to 32 flows in parallel.

---

These patch depends on:
https://patches.dpdk.org/patch/70429/
to be applied first.

 lib/librte_acl/acl_run_avx512.c    |   3 +
 lib/librte_acl/acl_run_avx512x16.h | 635 +++++++++++++++++++++++++++++
 2 files changed, 638 insertions(+)
 create mode 100644 lib/librte_acl/acl_run_avx512x16.h
lib/librte_acl/acl_run_avx512.c +3 -0
index 8ee996679..332e359fb 100644
@@ -121,11 +121,14 @@ resolve_mcgt8_avx512x1(uint32_t result[],
 }
 
 #include "acl_run_avx512x8.h"
+#include "acl_run_avx512x16.h"
 
 int
 rte_acl_classify_avx512(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories)
 {
+	if (num >= 2 * MAX_SEARCHES_AVX16)
+		return search_avx512x16x2(ctx, data, results, num, categories);
 	if (num >= MAX_SEARCHES_AVX16)
 		return search_avx512x8x2(ctx, data, results, num, categories);
 	if (num >= MAX_SEARCHES_SSE8)
lib/librte_acl/acl_run_avx512x16.h new file +635 -0

635 lines not on this page · raw message

Signature · 1 line
2.17.1
#8 lore raw

v2 cover acl: introduce AVX512 classify method

In reply to Konstantin Ananyev

These patch series introduce support of AVX512 specific classify implementation for ACL library.
Inside it contains two code-paths –
one uses mostly 256 bit instruction/registers and can process up to 16 flows in parallel.
second uses 512 bit instruction/registers over majority of places and can process up to 32 flows in parallel.
This runtime code-path selection is done internally based on input burst size and is totally opaque to the user. On my SKX box test-acl shows ~20-65% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512 classify algorithms. ICX and CLX testing showed similar level of speedup: up to ~50-60%. Current AVX512 classify implementation is only supported on x86_64. Note that this series introduce a formal ABI incompatibility with previous versions of ACL library.

v1 -> v2:
Deduplicated 8/16 code paths as much as possible Updated default algorithm selection
Removed library constructor to make it easier integrate with
https://patches.dpdk.org/project/dpdk/list/?series=11831
Updated docs

These patch series depends on:
https://patches.dpdk.org/patch/73922/mbox/
to be applied first.

Konstantin Ananyev (12):
acl: fix x86 build when compiler doesn't support AVX2
doc: fix mixing classify methods in ACL guide
acl: remove of unused enum value
acl: remove library constructor
app/acl: few small improvements
test/acl: expand classify test coverage
acl: add infrastructure to support AVX512 classify
acl: introduce AVX512 classify implementation
acl: enhance AVX512 classify implementation
acl: for AVX512 classify use 4B load whenever possible test/acl: add AVX512 classify support app/acl: add AVX512 classify support

 app/test-acl/main.c                           |  19 +-
 app/test/test_acl.c                           | 104 ++--
 config/x86/meson.build                        |   3 +-
 .../prog_guide/packet_classif_access_ctrl.rst |  15 +
 doc/guides/rel_notes/deprecation.rst          |   4 -
 doc/guides/rel_notes/release_20_11.rst        |   9 +
 lib/librte_acl/acl.h                          |  12 +
 lib/librte_acl/acl_bld.c                      |  34 ++
 lib/librte_acl/acl_gen.c                      |   2 +-
 lib/librte_acl/acl_run_avx512.c               | 331 +++++++++++
 lib/librte_acl/acl_run_avx512x16.h            | 526 ++++++++++++++++++
 lib/librte_acl/acl_run_avx512x8.h             | 439 +++++++++++++++
 lib/librte_acl/meson.build                    |  39 ++
 lib/librte_acl/rte_acl.c                      | 198 +++++--
 lib/librte_acl/rte_acl.h                      |   3 +-
 15 files changed, 1638 insertions(+), 100 deletions(-)
 create mode 100644 lib/librte_acl/acl_run_avx512.c
 create mode 100644 lib/librte_acl/acl_run_avx512x16.h
 create mode 100644 lib/librte_acl/acl_run_avx512x8.h
Signature · 1 line
2.17.1
#9 lore raw

PATCH v2 1/12 acl: fix x86 build when compiler doesn't support AVX2

Right now we define dummy version of rte_acl_classify_avx2() when both X86 and AVX2 are not detected, though it should be for non-AVX2 case only.

Fixes e53ce4e41379 ("acl: remove use of weak functions")
---
 lib/librte_acl/rte_acl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/librte_acl/rte_acl.c +1 -1
index 777ec4d34..715b02359 100644
@@ -16,7 +16,6 @@ static struct rte_tailq_elem rte_acl_tailq = {
 };
 EAL_REGISTER_TAILQ(rte_acl_tailq)
 
-#ifndef RTE_ARCH_X86
 #ifndef CC_AVX2_SUPPORT
 /*
  * If the compiler doesn't support AVX2 instructions,
@@ -33,6 +32,7 @@ rte_acl_classify_avx2(__rte_unused const struct rte_acl_ctx *ctx,
 }
 #endif
 
+#ifndef RTE_ARCH_X86
 int
 rte_acl_classify_sse(__rte_unused const struct rte_acl_ctx *ctx,
 	__rte_unused const uint8_t **data,
Signature · 1 line
2.17.1
#10 lore raw

PATCH v2 2/12 doc: fix mixing classify methods in ACL guide

In reply to Konstantin Ananyev

Add brief description for missing ACL classify algorithms:
RTE_ACL_CLASSIFY_NEON and RTE_ACL_CLASSIFY_ALTIVEC.

Fixes 34fa6c27c156 ("acl: add NEON optimization for ARMv8")
Fixes 1d73135f9f1c ("acl: add AltiVec for ppc64")
---
 doc/guides/prog_guide/packet_classif_access_ctrl.rst | 6 ++++++
 1 file changed, 6 insertions(+)
doc/guides/prog_guide/packet_classif_access_ctrl.rst +6 -0
index 0345512b9..daf03e6d7 100644
@@ -373,6 +373,12 @@ There are several implementations of classify algorithm:
 
 *   **RTE_ACL_CLASSIFY_AVX2**: vector implementation, can process up to 16 flows in parallel. Requires AVX2 support.
 
+*   **RTE_ACL_CLASSIFY_NEON**: vector implementation, can process up to 8 flows
+    in parallel. Requires NEON support.
+
+*   **RTE_ACL_CLASSIFY_ALTIVEC**: vector implementation, can process up to 8
+    flows in parallel. Requires ALTIVEC support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
Signature · 1 line
2.17.1
#11 lore raw

PATCH v2 3/12 acl: remove of unused enum value

In reply to Konstantin Ananyev

Removal of unused enum value (RTE_ACL_CLASSIFY_NUM). This enum value is not used inside DPDK, while it prevents to add new classify algorithms without causing an ABI breakage.

Note that this change introduce a formal ABI incompatibility with previous versions of ACL library.

---
 doc/guides/rel_notes/deprecation.rst   | 4 ----
 doc/guides/rel_notes/release_20_11.rst | 4 ++++
 lib/librte_acl/rte_acl.h               | 1 -
 3 files changed, 4 insertions(+), 5 deletions(-)
doc/guides/rel_notes/deprecation.rst +0 -4
index 52168f775..3279a01ef 100644
@@ -288,10 +288,6 @@ Deprecation Notices
   - https://patches.dpdk.org/patch/71457/
   - https://patches.dpdk.org/patch/71456/
 
-* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value will be removed.
-  This enum value is not used inside DPDK, while it prevents to add new
-  classify algorithms without causing an ABI breakage.
-
 * sched: To allow more traffic classes, flexible mapping of pipe queues to
   traffic classes, and subport level configuration of pipes and queues
   changes will be made to macros, data structures and API functions defined
doc/guides/rel_notes/release_20_11.rst +4 -0
index b729bdf20..a9a1b0305 100644
@@ -97,6 +97,10 @@ API Changes
   and the function ``rte_rawdev_queue_conf_get()``
   from ``void`` to ``int`` allowing the return of error codes from drivers.
 
+* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value has been removed.
+  This enum value was not used inside DPDK, while it prevented to add new
+  classify algorithms without causing an ABI breakage.
+
 
 ABI Changes
 -----------
lib/librte_acl/rte_acl.h +0 -1
index aa22e70c6..b814423a6 100644
@@ -241,7 +241,6 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
-	RTE_ACL_CLASSIFY_NUM          /* should always be the last one. */
 };
 
 /**
Signature · 1 line
2.17.1
Reviewed-by on v2 3/12
#12 lore raw

Re: [dpdk-dev] [PATCH v2 03/12] acl: remove of unused enum value

Quoted 69 lines

-----Original Message-----
From: Konstantin Ananyev <[email protected]>
Sent: Wednesday, September 16, 2020 12:50 AM
To: [email protected]
Cc: [email protected]; Ruifeng Wang <[email protected]>; [email protected]; Konstantin Ananyev <[email protected]>
Subject: [PATCH v2 03/12] acl: remove of unused enum value

Removal of unused enum value (RTE_ACL_CLASSIFY_NUM).
This enum value is not used inside DPDK, while it prevents to add new classify algorithms without causing an ABI breakage.

Note that this change introduce a formal ABI incompatibility with previous versions of ACL library.

---
 doc/guides/rel_notes/deprecation.rst   | 4 ----
 doc/guides/rel_notes/release_20_11.rst | 4 ++++
 lib/librte_acl/rte_acl.h               | 1 -
 3 files changed, 4 insertions(+), 5 deletions(-)
doc/guides/rel_notes/deprecation.rst +0 -4
index 52168f775..3279a01ef 100644
@@ -288,10 +288,6 @@ Deprecation Notices
   - https://patches.dpdk.org/patch/71457/
   - https://patches.dpdk.org/patch/71456/
 
-* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value will be removed.
-  This enum value is not used inside DPDK, while it prevents to add new
-  classify algorithms without causing an ABI breakage.
-
 * sched: To allow more traffic classes, flexible mapping of pipe queues to
   traffic classes, and subport level configuration of pipes and queues
   changes will be made to macros, data structures and API functions defined
doc/guides/rel_notes/release_20_11.rst +5 -0
index b729bdf20..a9a1b0305 100644
@@ -97,6 +97,10 @@ API Changes
   and the function ``rte_rawdev_queue_conf_get()``
   from ``void`` to ``int`` allowing the return of error codes from drivers.
 
+* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value has been removed.
+  This enum value was not used inside DPDK, while it prevented to add
+new
+  classify algorithms without causing an ABI breakage.
+
 
 ABI Changes
 -----------
lib/librte_acl/rte_acl.h index renamed from lib/librte_acl/rte_acl.h +0 -0

aa22e70c6..b814423a6 100644

lib/librte_acl/rte_acl.h +0 -2
@@ -241,7 +241,6 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
-	RTE_ACL_CLASSIFY_NUM          /* should always be the last one. */
 };
 
 /**
--
Quoted 1 line

2.17.1

Looks good from ABI perspective.

#13 lore raw

PATCH v2 4/12 acl: remove library constructor

In reply to Konstantin Ananyev

Right now ACL library determines best possible (default) classify method on a given platform with specilal constructor function rte_acl_init(). This patch makes the following changes:
- Move selection of default classify method into a separate private function and call it for each ACL context creation (rte_acl_create()).
- Remove library constructor function
- Make rte_acl_set_ctx_classify() to check that requested algorithm is supported on given platform.

The purpose of these changes to improve and simplify algorithm selection process and prepare ACL library to be integrated with:
add max SIMD bitwidth to EAL
(https://patches.dpdk.org/project/dpdk/list/?series=11831)
patch-set

---
 lib/librte_acl/rte_acl.c | 166 ++++++++++++++++++++++++++++++---------
 lib/librte_acl/rte_acl.h |   1 +
 2 files changed, 132 insertions(+), 35 deletions(-)
lib/librte_acl/rte_acl.c +131 -35
index 715b02359..fbcf45fdc 100644
@@ -79,57 +79,153 @@ static const rte_acl_classify_t classify_fns[] = {
 	[RTE_ACL_CLASSIFY_ALTIVEC] = rte_acl_classify_altivec,
 };
 
-/* by default, use always available scalar code path. */
-static enum rte_acl_classify_alg rte_acl_default_classify =
-	RTE_ACL_CLASSIFY_SCALAR;
+/*
+ * Helper function for acl_check_alg.
+ * Check support for ARM specific classify methods.
+ */
+static int
+acl_check_alg_arm(enum rte_acl_classify_alg alg)
+{
+	if (alg == RTE_ACL_CLASSIFY_NEON) {
+#if defined(RTE_ARCH_ARM64)
+		return 0;
+#elif defined(RTE_ARCH_ARM)
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON))
+			return 0;
+		return -ENOTSUP;
+#else
+		return -ENOTSUP;
+#endif
+	}
+
+	return -EINVAL;
+}
 
-static void
-rte_acl_set_default_classify(enum rte_acl_classify_alg alg)
+/*
+ * Helper function for acl_check_alg.
+ * Check support for PPC specific classify methods.
+ */
+static int
+acl_check_alg_ppc(enum rte_acl_classify_alg alg)
 {
-	rte_acl_default_classify = alg;
+	if (alg == RTE_ACL_CLASSIFY_ALTIVEC) {
+#if defined(RTE_ARCH_PPC_64)
+		return 0;
+#else
+		return -ENOTSUP;
+#endif
+	}
+
+	return -EINVAL;
 }
 
-extern int
-rte_acl_set_ctx_classify(struct rte_acl_ctx *ctx, enum rte_acl_classify_alg alg)
+/*
+ * Helper function for acl_check_alg.
+ * Check support for x86 specific classify methods.
+ */
+static int
+acl_check_alg_x86(enum rte_acl_classify_alg alg)
 {
-	if (ctx == NULL || (uint32_t)alg >= RTE_DIM(classify_fns))
-		return -EINVAL;
+	if (alg == RTE_ACL_CLASSIFY_AVX2) {
+#ifdef CC_AVX2_SUPPORT
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
+			return 0;
+#endif
+		return -ENOTSUP;
+	}
 
-	ctx->alg = alg;
-	return 0;
+	if (alg == RTE_ACL_CLASSIFY_SSE) {
+#ifdef RTE_ARCH_X86
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
+			return 0;
+#endif
+		return -ENOTSUP;
+	}
+
+	return -EINVAL;
 }
 
 /*
- * Select highest available classify method as default one.
- * Note that CLASSIFY_AVX2 should be set as a default only
- * if both conditions are met:
- * at build time compiler supports AVX2 and target cpu supports AVX2.
+ * Check if input alg is supported by given platform/binary.
+ * Note that both conditions should be met:
+ * - at build time compiler supports ISA used by given methos
+ *   at run time target cpu supports necessary ISA.
  */
-RTE_INIT(rte_acl_init)
+static int
+acl_check_alg(enum rte_acl_classify_alg alg)
 {
-	enum rte_acl_classify_alg alg = RTE_ACL_CLASSIFY_DEFAULT;
+	switch (alg) {
+	case RTE_ACL_CLASSIFY_NEON:
+		return acl_check_alg_arm(alg);
+	case RTE_ACL_CLASSIFY_ALTIVEC:
+		return acl_check_alg_ppc(alg);
+	case RTE_ACL_CLASSIFY_AVX2:
+	case RTE_ACL_CLASSIFY_SSE:
+		return acl_check_alg_x86(alg);
+	/* scalar method is supported on all platforms */
+	case RTE_ACL_CLASSIFY_SCALAR:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
 
-#if defined(RTE_ARCH_ARM64)
-	alg =  RTE_ACL_CLASSIFY_NEON;
-#elif defined(RTE_ARCH_ARM)
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON))
-		alg =  RTE_ACL_CLASSIFY_NEON;
+/*
+ * Get preferred alg for given platform.
+ */
+static enum rte_acl_classify_alg
+acl_get_best_alg(void)
+{
+	/*
+	 * array of supported methods for each platform.
+	 * Note that order is important - from most to less preferable.
+	 */
+	static const enum rte_acl_classify_alg alg[] = {
+#if defined(RTE_ARCH_ARM)
+		RTE_ACL_CLASSIFY_NEON,
 #elif defined(RTE_ARCH_PPC_64)
-	alg = RTE_ACL_CLASSIFY_ALTIVEC;
-#else
-#ifdef CC_AVX2_SUPPORT
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
-		alg = RTE_ACL_CLASSIFY_AVX2;
-	else if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
-#else
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
+		RTE_ACL_CLASSIFY_ALTIVEC,
+#elif defined(RTE_ARCH_X86)
+		RTE_ACL_CLASSIFY_AVX2,
+		RTE_ACL_CLASSIFY_SSE,
 #endif
-		alg = RTE_ACL_CLASSIFY_SSE;
+		RTE_ACL_CLASSIFY_SCALAR,
+	};
 
-#endif
-	rte_acl_set_default_classify(alg);
+	uint32_t i;
+
+	/* find best possible alg */
+	for (i = 0; i != RTE_DIM(alg) && acl_check_alg(alg[i]) != 0; i++)
+		;
+
+	/* we always have to find something suitable */
+	RTE_VERIFY(i != RTE_DIM(alg));
+	return alg[i];
+}
+
+extern int
+rte_acl_set_ctx_classify(struct rte_acl_ctx *ctx, enum rte_acl_classify_alg alg)
+{
+	int32_t rc;
+
+	/* formal parameters check */
+	if (ctx == NULL || (uint32_t)alg >= RTE_DIM(classify_fns))
+		return -EINVAL;
+
+	/* user asked us to select the *best* one */
+	if (alg == RTE_ACL_CLASSIFY_DEFAULT)
+		alg = acl_get_best_alg();
+
+	/* check that given alg is supported */
+	rc = acl_check_alg(alg);
+	if (rc != 0)
+		return rc;
+
+	ctx->alg = alg;
+	return 0;
 }
 
+
 int
 rte_acl_classify_alg(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories,
@@ -262,7 +358,7 @@ rte_acl_create(const struct rte_acl_param *param)
 		ctx->max_rules = param->max_rule_num;
 		ctx->rule_sz = param->rule_size;
 		ctx->socket_id = param->socket_id;
-		ctx->alg = rte_acl_default_classify;
+		ctx->alg = acl_get_best_alg();
 		strlcpy(ctx->name, param->name, sizeof(ctx->name));
 
 		te->data = (void *) ctx;
lib/librte_acl/rte_acl.h +1 -0
index b814423a6..3999f15de 100644
@@ -329,6 +329,7 @@ rte_acl_classify_alg(const struct rte_acl_ctx *ctx,
  *   existing algorithm, and that it could be run on the given CPU.
  * @return
  *   - -EINVAL if the parameters are invalid.
+ *   - -ENOTSUP requested algorithm is not supported by given platform.
  *   - Zero if operation completed successfully.
  */
 extern int
Signature · 1 line
2.17.1
#14 lore raw

PATCH v2 5/12 app/acl: few small improvements

In reply to Konstantin Ananyev

- enhance output to print extra stats
- use rte_rdtsc_precise() for cycle measurements

---
 app/test-acl/main.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
app/test-acl/main.c +10 -5
index 0a5dfb621..d9b65517c 100644
@@ -862,9 +862,10 @@ search_ip5tuples(__rte_unused void *arg)
 {
 	uint64_t pkt, start, tm;
 	uint32_t i, lcore;
+	long double st;
 
 	lcore = rte_lcore_id();
-	start = rte_rdtsc();
+	start = rte_rdtsc_precise();
 	pkt = 0;
 
 	for (i = 0; i != config.iter_num; i++) {
@@ -872,12 +873,16 @@ search_ip5tuples(__rte_unused void *arg)
 			config.trace_step, config.alg.name);
 	}
 
-	tm = rte_rdtsc() - start;
+	tm = rte_rdtsc_precise() - start;
+
+	st = (long double)tm / rte_get_timer_hz();
 	dump_verbose(DUMP_NONE, stdout,
 		"%s  @lcore %u: %" PRIu32 " iterations, %" PRIu64 " pkts, %"
-		PRIu32 " categories, %" PRIu64 " cycles, %#Lf cycles/pkt\n",
-		__func__, lcore, i, pkt, config.run_categories,
-		tm, (pkt == 0) ? 0 : (long double)tm / pkt);
+		PRIu32 " categories, %" PRIu64 " cycles (%.2Lf sec), "
+		"%.2Lf cycles/pkt, %.2Lf pkt/sec\n",
+		__func__, lcore, i, pkt,
+		config.run_categories, tm, st,
+		(pkt == 0) ? 0 : (long double)tm / pkt, pkt / st);
 
 	return 0;
 }
Signature · 1 line
2.17.1
#15 lore raw

PATCH v2 6/12 test/acl: expand classify test coverage

In reply to Konstantin Ananyev

Make classify test to run for all supported methods.

---
 app/test/test_acl.c | 103 ++++++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 52 deletions(-)
app/test/test_acl.c +51 -52
index 316bf4d06..333b34757 100644
@@ -266,22 +266,20 @@ rte_acl_ipv4vlan_build(struct rte_acl_ctx *ctx,
 }
 
 /*
- * Test scalar and SSE ACL lookup.
+ * Test ACL lookup (selected alg).
  */
 static int
-test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
-	size_t dim)
+test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
+	const uint8_t *data[], size_t dim, enum rte_acl_classify_alg alg)
 {
-	int ret, i;
-	uint32_t result, count;
+	int32_t ret;
+	uint32_t i, result, count;
 	uint32_t results[dim * RTE_ACL_MAX_CATEGORIES];
-	const uint8_t *data[dim];
-	/* swap all bytes in the data to network order */
-	bswap_test_data(test_data, dim, 1);
 
-	/* store pointers to test data */
-	for (i = 0; i < (int) dim; i++)
-		data[i] = (uint8_t *)&test_data[i];
+	/* set given classify alg, skip test if alg is not supported */
+	ret = rte_acl_set_ctx_classify(acx, alg);
+	if (ret == -ENOTSUP)
+		return 0;
 
 	/**
 	 * these will run quite a few times, it's necessary to test code paths
@@ -291,12 +289,13 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 		ret = rte_acl_classify(acx, data, results,
 				count, RTE_ACL_MAX_CATEGORIES);
 		if (ret != 0) {
-			printf("Line %i: SSE classify failed!\n", __LINE__);
-			goto err;
+			printf("Line %i: classify(alg=%d) failed!\n",
+				__LINE__, alg);
+			return ret;
 		}
 
 		/* check if we allow everything we should allow */
-		for (i = 0; i < (int) count; i++) {
+		for (i = 0; i < count; i++) {
 			result =
 				results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW];
 			if (result != test_data[i].allow) {
@@ -304,63 +303,63 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 					"(expected %"PRIu32" got %"PRIu32")!\n",
 					__LINE__, i, test_data[i].allow,
 					result);
-				ret = -EINVAL;
-				goto err;
+				return -EINVAL;
 			}
 		}
 
 		/* check if we deny everything we should deny */
-		for (i = 0; i < (int) count; i++) {
+		for (i = 0; i < count; i++) {
 			result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY];
 			if (result != test_data[i].deny) {
 				printf("Line %i: Error in deny results at %i "
 					"(expected %"PRIu32" got %"PRIu32")!\n",
 					__LINE__, i, test_data[i].deny,
 					result);
-				ret = -EINVAL;
-				goto err;
+				return -EINVAL;
 			}
 		}
 	}
 
-	/* make a quick check for scalar */
-	ret = rte_acl_classify_alg(acx, data, results,
-			dim, RTE_ACL_MAX_CATEGORIES,
-			RTE_ACL_CLASSIFY_SCALAR);
-	if (ret != 0) {
-		printf("Line %i: scalar classify failed!\n", __LINE__);
-		goto err;
-	}
+	/* restore default classify alg */
+	return rte_acl_set_ctx_classify(acx, RTE_ACL_CLASSIFY_DEFAULT);
+}
 
-	/* check if we allow everything we should allow */
-	for (i = 0; i < (int) dim; i++) {
-		result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW];
-		if (result != test_data[i].allow) {
-			printf("Line %i: Error in allow results at %i "
-					"(expected %"PRIu32" got %"PRIu32")!\n",
-					__LINE__, i, test_data[i].allow,
-					result);
-			ret = -EINVAL;
-			goto err;
-		}
-	}
+/*
+ * Test ACL lookup (all possible methods).
+ */
+static int
+test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
+	size_t dim)
+{
+	int32_t ret;
+	uint32_t i;
+	const uint8_t *data[dim];
 
-	/* check if we deny everything we should deny */
-	for (i = 0; i < (int) dim; i++) {
-		result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY];
-		if (result != test_data[i].deny) {
-			printf("Line %i: Error in deny results at %i "
-					"(expected %"PRIu32" got %"PRIu32")!\n",
-					__LINE__, i, test_data[i].deny,
-					result);
-			ret = -EINVAL;
-			goto err;
-		}
-	}
+	static const enum rte_acl_classify_alg alg[] = {
+		RTE_ACL_CLASSIFY_SCALAR,
+		RTE_ACL_CLASSIFY_SSE,
+		RTE_ACL_CLASSIFY_AVX2,
+		RTE_ACL_CLASSIFY_NEON,
+		RTE_ACL_CLASSIFY_ALTIVEC,
+	};
+
+	/* swap all bytes in the data to network order */
+	bswap_test_data(test_data, dim, 1);
+
+	/* store pointers to test data */
+	for (i = 0; i < dim; i++)
+		data[i] = (uint8_t *)&test_data[i];
 
 	ret = 0;
+	for (i = 0; i != RTE_DIM(alg); i++) {
+		ret = test_classify_alg(acx, test_data, data, dim, alg[i]);
+		if (ret < 0) {
+			printf("Line %i: %s() for alg=%d failed, errno=%d\n",
+				__LINE__, __func__, alg[i], -ret);
+			break;
+		}
+	}
 
-err:
 	/* swap data back to cpu order so that next time tests don't fail */
 	bswap_test_data(test_data, dim, 0);
 	return ret;
Signature · 1 line
2.17.1
#16 lore raw

PATCH v2 7/12 acl: add infrastructure to support AVX512 classify

In reply to Konstantin Ananyev

Add necessary changes to support new AVX512 specific ACL classify algorithm:
- changes in meson.build to check that build tools (compiler, assembler, etc.) do properly support AVX512.
- run-time checks to make sure target platform does support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512 implementation couldn't be properly supported.

---
 config/x86/meson.build          |  3 ++-
 lib/librte_acl/acl.h            |  4 ++++
 lib/librte_acl/acl_run_avx512.c | 17 ++++++++++++++
 lib/librte_acl/meson.build      | 39 +++++++++++++++++++++++++++++++++
 lib/librte_acl/rte_acl.c        | 29 ++++++++++++++++++++++++
 lib/librte_acl/rte_acl.h        |  1 +
 6 files changed, 92 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512.c
config/x86/meson.build +2 -1
index 6ec020ef6..c5626e914 100644
@@ -23,7 +23,8 @@ foreach f:base_flags
 endforeach
 
 optional_flags = ['AES', 'PCLMUL',
-		'AVX', 'AVX2', 'AVX512F',
+		'AVX', 'AVX2',
+		'AVX512F', 'AVX512VL', 'AVX512CD', 'AVX512BW',
 		'RDRND', 'RDSEED']
 foreach f:optional_flags
 	if cc.get_define('__@0@__'.format(f), args: machine_args) == '1'
lib/librte_acl/acl.h +4 -0
index 39d45a0c2..2022cf253 100644
@@ -201,6 +201,10 @@ int
 rte_acl_classify_avx2(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories);
 
+int
+rte_acl_classify_avx512(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories);
+
 int
 rte_acl_classify_neon(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories);
lib/librte_acl/acl_run_avx512.c new file +17 -0
new file mode 100644
index 000000000..67274989d
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#include "acl_run_sse.h"
+
+int
+rte_acl_classify_avx512(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories)
+{
+	if (num >= MAX_SEARCHES_SSE8)
+		return search_sse_8(ctx, data, results, num, categories);
+	if (num >= MAX_SEARCHES_SSE4)
+		return search_sse_4(ctx, data, results, num, categories);
+
+	return rte_acl_classify_scalar(ctx, data, results, num, categories);
+}
lib/librte_acl/meson.build +39 -0
index d1e2c184c..b2fd61cad 100644
@@ -27,6 +27,45 @@ if dpdk_conf.has('RTE_ARCH_X86')
 		cflags += '-DCC_AVX2_SUPPORT'
 	endif
 
+	# compile AVX512 version if:
+	# we are building 64-bit binary AND binutils can generate proper code
+
+	if dpdk_conf.has('RTE_ARCH_X86_64') and binutils_ok.returncode() == 0
+
+		# compile AVX512 version if either:
+		# a. we have AVX512 supported in minimum instruction set
+		#    baseline
+		# b. it's not minimum instruction set, but supported by
+		#    compiler
+		#
+		# in former case, just add avx512 C file to files list
+		# in latter case, compile c file to static lib, using correct
+		# compiler flags, and then have the .o file from static lib
+		# linked into main lib.
+
+		if dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512F') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512VL') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512CD') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512BW')
+
+			sources += files('acl_run_avx512.c')
+			cflags += '-DCC_AVX512_SUPPORT'
+
+		elif cc.has_multi_arguments('-mavx512f', '-mavx512vl',
+					'-mavx512cd', '-mavx512bw')
+
+			avx512_tmplib = static_library('avx512_tmp',
+				'acl_run_avx512.c',
+				dependencies: static_rte_eal,
+				c_args: cflags +
+					['-mavx512f', '-mavx512vl',
+					 '-mavx512cd', '-mavx512bw'])
+			objs += avx512_tmplib.extract_objects(
+					'acl_run_avx512.c')
+			cflags += '-DCC_AVX512_SUPPORT'
+		endif
+	endif
+
 elif dpdk_conf.has('RTE_ARCH_ARM') or dpdk_conf.has('RTE_ARCH_ARM64')
 	cflags += '-flax-vector-conversions'
 	sources += files('acl_run_neon.c')
lib/librte_acl/rte_acl.c +29 -0
index fbcf45fdc..fdcb7a798 100644
@@ -16,6 +16,22 @@ static struct rte_tailq_elem rte_acl_tailq = {
 };
 EAL_REGISTER_TAILQ(rte_acl_tailq)
 
+#ifndef CC_AVX512_SUPPORT
+/*
+ * If the compiler doesn't support AVX512 instructions,
+ * then the dummy one would be used instead for AVX512 classify method.
+ */
+int
+rte_acl_classify_avx512(__rte_unused const struct rte_acl_ctx *ctx,
+	__rte_unused const uint8_t **data,
+	__rte_unused uint32_t *results,
+	__rte_unused uint32_t num,
+	__rte_unused uint32_t categories)
+{
+	return -ENOTSUP;
+}
+#endif
+
 #ifndef CC_AVX2_SUPPORT
 /*
  * If the compiler doesn't support AVX2 instructions,
@@ -77,6 +93,7 @@ static const rte_acl_classify_t classify_fns[] = {
 	[RTE_ACL_CLASSIFY_AVX2] = rte_acl_classify_avx2,
 	[RTE_ACL_CLASSIFY_NEON] = rte_acl_classify_neon,
 	[RTE_ACL_CLASSIFY_ALTIVEC] = rte_acl_classify_altivec,
+	[RTE_ACL_CLASSIFY_AVX512] = rte_acl_classify_avx512,
 };
 
 /*
@@ -126,6 +143,17 @@ acl_check_alg_ppc(enum rte_acl_classify_alg alg)
 static int
 acl_check_alg_x86(enum rte_acl_classify_alg alg)
 {
+	if (alg == RTE_ACL_CLASSIFY_AVX512) {
+#ifdef CC_AVX512_SUPPORT
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512F) &&
+			rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512VL) &&
+			rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512CD) &&
+			rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX512BW))
+			return 0;
+#endif
+		return -ENOTSUP;
+	}
+
 	if (alg == RTE_ACL_CLASSIFY_AVX2) {
 #ifdef CC_AVX2_SUPPORT
 		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
@@ -159,6 +187,7 @@ acl_check_alg(enum rte_acl_classify_alg alg)
 		return acl_check_alg_arm(alg);
 	case RTE_ACL_CLASSIFY_ALTIVEC:
 		return acl_check_alg_ppc(alg);
+	case RTE_ACL_CLASSIFY_AVX512:
 	case RTE_ACL_CLASSIFY_AVX2:
 	case RTE_ACL_CLASSIFY_SSE:
 		return acl_check_alg_x86(alg);
lib/librte_acl/rte_acl.h +1 -0
index 3999f15de..d243a1c84 100644
@@ -241,6 +241,7 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
+	RTE_ACL_CLASSIFY_AVX512 = 6,    /**< requires AVX512 support. */
 };
 
 /**
Signature · 1 line
2.17.1
Acked-by on v2 7/12
#17 lore raw

Re: [dpdk-dev] [PATCH v2 07/12] acl: add infrastructure to support AVX512 classify

Quoted 10 lines · Konstantin Ananyev

Add necessary changes to support new AVX512 specific ACL classify algorithm:
- changes in meson.build to check that build tools (compiler, assembler, etc.) do properly support AVX512.
- run-time checks to make sure target platform does support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512 implementation couldn't be properly supported.

---

This all looks correct, though I wonder do you really need to check all those AVX512 flags in each case? Since "F" is always present in any AVX512 implementation perhaps it can be checked, though if the other three always need to be checked I can understand if you want to keep it there for completeness. [Are all the other 3 used in your code?]

#18 lore raw

Re: [dpdk-dev] [PATCH v2 07/12] acl: add infrastructure to support AVX512 classify

Hi Bruce,

Quoted 9 lines · Bruce Richardson
Quoted 8 lines · Konstantin Ananyev

Add necessary changes to support new AVX512 specific ACL classify algorithm:
- changes in meson.build to check that build tools (compiler, assembler, etc.) do properly support AVX512.
- run-time checks to make sure target platform does support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512 implementation couldn't be properly supported.

Quoted 9 lines
Quoted 2 lines

---

This all looks correct, though I wonder do you really need to check all those AVX512 flags in each case? Since "F" is always present in any AVX512 implementation perhaps it can be checked, though if the other three always need to be checked I can understand if you want to keep it there for completeness. [Are all the other 3 used in your code?]

As for me it is good to check all the flags supported by compiler. Some old (but still supported by dpdk) gcc can't compile the code in some circumstances. For example:

gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12) <-- pretty old but still supported, right?

gcc -march=native -dM -E - < /dev/null | grep "AVX512" #define __AVX512F__ 1
#define __AVX512BW__ 1
#define __AVX512CD__ 1
#define __AVX512DQ__ 1

Does not support __AVX512VL__

from acl_run_avx512x8.h in first_trans8 there is _mm256_mmask_i32gather_epi32 which requires this flag, so compilation will fail.

Quoted 2 lines
Signature · 2 lines
Regards,
Vladimir
#19 lore raw

Re: [dpdk-dev] [PATCH v2 07/12] acl: add infrastructure to support AVX512 classify

Quoted 29 lines · Vladimir

Hi Bruce,

Quoted 9 lines · Bruce Richardson
Quoted 8 lines · Konstantin Ananyev

Add necessary changes to support new AVX512 specific ACL classify algorithm:
- changes in meson.build to check that build tools (compiler, assembler, etc.) do properly support AVX512.
- run-time checks to make sure target platform does support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512 implementation couldn't be properly supported.

Quoted 9 lines
Quoted 2 lines

---

This all looks correct, though I wonder do you really need to check all those AVX512 flags in each case? Since "F" is always present in any AVX512 implementation perhaps it can be checked, though if the other three always need to be checked I can understand if you want to keep it there for completeness. [Are all the other 3 used in your code?]

As for me it is good to check all the flags supported by compiler. Some old (but still supported by dpdk) gcc can't compile the code in some circumstances. For example:

gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12) <-- pretty old
but still supported, right?

Quoted 8 lines

gcc -march=native -dM -E - < /dev/null | grep "AVX512" #define __AVX512F__ 1
#define __AVX512BW__ 1
#define __AVX512CD__ 1
#define __AVX512DQ__ 1

Does not support __AVX512VL__

Interesting, seems like checking them all to be sure is the right approach so.
My ack stands so, and ignore the comment.

#20 lore raw

Re: [dpdk-dev] [PATCH v2 07/12] acl: add infrastructure to support AVX512 classify

Quoted 14 lines · Vladimir
Quoted 12 lines

Hi Bruce,

Quoted 9 lines · Bruce Richardson
Quoted 8 lines · Konstantin Ananyev

Add necessary changes to support new AVX512 specific ACL classify algorithm:
- changes in meson.build to check that build tools (compiler, assembler, etc.) do properly support AVX512.
- run-time checks to make sure target platform does support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512 implementation couldn't be properly supported.

Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines

---

This all looks correct, though I wonder do you really need to check all those AVX512 flags in each case? Since "F" is always present in any AVX512 implementation perhaps it can be checked, though if the other three always need to be checked I can understand if you want to keep it there for completeness. [Are all the other 3 used in your code?]

Yep, ACL uses all of them.
Thanks
Konstantin

Quoted 20 lines
Quoted 9 lines
Quoted 1 line

As for me it is good to check all the flags supported by compiler. Some old (but still supported by dpdk) gcc can't compile the code in some circumstances. For example:

gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12) <-- pretty old
but still supported, right?

Quoted 8 lines

gcc -march=native -dM -E - < /dev/null | grep "AVX512" #define __AVX512F__ 1
#define __AVX512BW__ 1
#define __AVX512CD__ 1
#define __AVX512DQ__ 1

Does not support __AVX512VL__

Interesting, seems like checking them all to be sure is the right approach so.
My ack stands so, and ignore the comment.

#21 lore raw

PATCH v2 8/12 acl: introduce AVX512 classify implementation

In reply to Konstantin Ananyev

Introduce classify implementation that uses AVX512 specific ISA. Current approach uses mix of 256i/512-bit width registers/instructions and is able to process up to 16 flows in parallel.
Note that for now only 64-bit version of rte_acl_classify_avx512() is available.

---
 lib/librte_acl/acl.h              |   7 +
 lib/librte_acl/acl_gen.c          |   2 +-
 lib/librte_acl/acl_run_avx512.c   | 145 +++++++
 lib/librte_acl/acl_run_avx512x8.h | 620 ++++++++++++++++++++++++++++++
 4 files changed, 773 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512x8.h
lib/librte_acl/acl.h +7 -0
index 2022cf253..3f0719f33 100644
@@ -76,6 +76,13 @@ struct rte_acl_bitset {
  * input_byte - ((uint8_t *)&transition)[4 + input_byte / 64].
  */
 
+/*
+ * Each ACL RT contains an idle nomatch node:
+ * a SINGLE node at predefined position (RTE_ACL_DFA_SIZE)
+ * that points to itself.
+ */
+#define RTE_ACL_IDLE_NODE	(RTE_ACL_DFA_SIZE | RTE_ACL_NODE_SINGLE)
+
 /*
  * Structure of a node is a set of ptrs and each ptr has a bit map
  * of values associated with this transition.
lib/librte_acl/acl_gen.c +1 -1
index f1b9d12f1..e759a2ca1 100644
@@ -496,7 +496,7 @@ rte_acl_gen(struct rte_acl_ctx *ctx, struct rte_acl_trie *trie,
 	 * highest index, that points to itself)
 	 */
 
-	node_array[RTE_ACL_DFA_SIZE] = RTE_ACL_DFA_SIZE | RTE_ACL_NODE_SINGLE;
+	node_array[RTE_ACL_DFA_SIZE] = RTE_ACL_IDLE_NODE;
 
 	for (n = 0; n < RTE_ACL_DFA_SIZE; n++)
 		node_array[n] = no_match;
lib/librte_acl/acl_run_avx512.c +145 -0

155 lines not on this page · raw message

lib/librte_acl/acl_run_avx512x8.h new file +620 -0

620 lines not on this page · raw message

Signature · 1 line
2.17.1
#22 lore raw

PATCH v2 9/12 acl: enhance AVX512 classify implementation

In reply to Konstantin Ananyev

Add search_avx512x16x2() which uses mostly 512-bit width registers/instructions and is able to process up to 32 flows in parallel. That allows to futher speedup rte_acl_classify_avx512() for bursts with 32+ requests.
Run-time code-path selection is done internally based on input burst size and is totally opaque to the user.

---

These patch depends on:
https://patches.dpdk.org/patch/73922/mbox/
to be applied first.

 .../prog_guide/packet_classif_access_ctrl.rst |   9 +
 doc/guides/rel_notes/release_20_11.rst        |   5 +
 lib/librte_acl/acl_run_avx512.c               | 162 ++++++
 lib/librte_acl/acl_run_avx512x16.h            | 526 ++++++++++++++++++
 lib/librte_acl/acl_run_avx512x8.h             | 195 +------
 5 files changed, 709 insertions(+), 188 deletions(-)
 create mode 100644 lib/librte_acl/acl_run_avx512x16.h
doc/guides/prog_guide/packet_classif_access_ctrl.rst +9 -0
index daf03e6d7..f6c64fbd9 100644
@@ -379,10 +379,19 @@ There are several implementations of classify algorithm:
 *   **RTE_ACL_CLASSIFY_ALTIVEC**: vector implementation, can process up to 8
     flows in parallel. Requires ALTIVEC support.
 
+*   **RTE_ACL_CLASSIFY_AVX512**: vector implementation, can process up to 32
+    flows in parallel. Requires AVX512 support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
 
+.. note::
+
+     Right now ``RTE_ACL_CLASSIFY_AVX512`` is not selected by default
+     (due to possible frequency level change), but it can be selected at
+     runtime by apps through the use of ACL API: ``rte_acl_set_ctx_classify``.
+
 Application Programming Interface (API) Usage
 ---------------------------------------------
 
doc/guides/rel_notes/release_20_11.rst +5 -0
index a9a1b0305..acdd12ef9 100644
@@ -55,6 +55,11 @@ New Features
      Also, make sure to start the actual text at the margin.
      =======================================================
 
+* **Add new AVX512 specific classify algorithm for ACL library.**
+
+  Added new ``RTE_ACL_CLASSIFY_AVX512`` vector implementation,
+  which can processup to 32 flows in parallel. Requires AVX512 support.
+
 
 Removed Items
 -------------
lib/librte_acl/acl_run_avx512.c +162 -0

187 lines not on this page · raw message

lib/librte_acl/acl_run_avx512x16.h new file +526 -0

526 lines not on this page · raw message

lib/librte_acl/acl_run_avx512x8.h +7 -188

241 lines not on this page · raw message

Signature · 1 line
2.17.1
#23 lore raw

PATCH v2 10/12 acl: for AVX512 classify use 4B load whenever possible

In reply to Konstantin Ananyev

With current ACL implementation first field in the rule definition has always to be one byte long. Though for optimising classify implementation it might be useful to be able to use 4B reads (as we do for rest of the fields).
So at build phase, check user provided field definitions to determine is it safe to do 4B loads for first ACL field.
Then at run-time this information can be used to choose classify behavior.

---
 lib/librte_acl/acl.h               |  1 +
 lib/librte_acl/acl_bld.c           | 34 ++++++++++++++++++++++++++++++
 lib/librte_acl/acl_run_avx512.c    |  7 ++++++
 lib/librte_acl/acl_run_avx512x16.h |  8 +++----
 lib/librte_acl/acl_run_avx512x8.h  |  8 +++----
 lib/librte_acl/rte_acl.c           |  1 +
 6 files changed, 51 insertions(+), 8 deletions(-)
lib/librte_acl/acl.h +1 -0
index 3f0719f33..493dec2a2 100644
@@ -169,6 +169,7 @@ struct rte_acl_ctx {
 	int32_t             socket_id;
 	/** Socket ID to allocate memory from. */
 	enum rte_acl_classify_alg alg;
+	uint32_t           first_load_sz;
 	void               *rules;
 	uint32_t            max_rules;
 	uint32_t            rule_sz;
lib/librte_acl/acl_bld.c +34 -0
index d1f920b09..da10864cd 100644
@@ -1581,6 +1581,37 @@ acl_check_bld_param(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 	return 0;
 }
 
+/*
+ * With current ACL implementation first field in the rule definition
+ * has always to be one byte long. Though for optimising *classify*
+ * implementation it might be useful to be able to use 4B reads
+ * (as we do for rest of the fields).
+ * This function checks input config to determine is it safe to do 4B
+ * loads for first ACL field. For that we need to make sure that
+ * first field in our rule definition doesn't have the biggest offset,
+ * i.e. we still do have other fields located after the first one.
+ * Contrary if first field has the largest offset, then it means
+ * first field can occupy the very last byte in the input data buffer,
+ * and we have to do single byte load for it.
+ */
+static uint32_t
+get_first_load_size(const struct rte_acl_config *cfg)
+{
+	uint32_t i, max_ofs, ofs;
+
+	ofs = 0;
+	max_ofs = 0;
+
+	for (i = 0; i != cfg->num_fields; i++) {
+		if (cfg->defs[i].field_index == 0)
+			ofs = cfg->defs[i].offset;
+		else if (max_ofs < cfg->defs[i].offset)
+			max_ofs = cfg->defs[i].offset;
+	}
+
+	return (ofs < max_ofs) ? sizeof(uint32_t) : sizeof(uint8_t);
+}
+
 int
 rte_acl_build(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 {
@@ -1618,6 +1649,9 @@ rte_acl_build(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 				/* set data indexes. */
 				acl_set_data_indexes(ctx);
 
+				/* determine can we always do 4B load */
+				ctx->first_load_sz = get_first_load_size(cfg);
+
 				/* copy in build config. */
 				ctx->config = *cfg;
 			}
lib/librte_acl/acl_run_avx512.c +7 -0
index 60762b7d6..51bfa6a3b 100644
@@ -16,6 +16,7 @@ struct acl_flow_avx512 {
 	uint32_t num_packets;       /* number of packets processed */
 	uint32_t total_packets;     /* max number of packets to process */
 	uint32_t root_index;        /* current root index */
+	uint32_t first_load_sz;     /* first load size for new packet */
 	const uint64_t *trans;      /* transition table */
 	const uint32_t *data_index; /* input data indexes */
 	const uint8_t **idata;      /* input data */
@@ -29,6 +30,7 @@ acl_set_flow_avx512(struct acl_flow_avx512 *flow, const struct rte_acl_ctx *ctx,
 {
 	flow->num_packets = 0;
 	flow->total_packets = total_packets;
+	flow->first_load_sz = ctx->first_load_sz;
 	flow->root_index = ctx->trie[trie].root_index;
 	flow->trans = ctx->trans_table;
 	flow->data_index = ctx->trie[trie].data_index;
@@ -155,6 +157,11 @@ resolve_mcgt8_avx512x1(uint32_t result[],
 	}
 }
 
+/*
+ * unfortunately current AVX512 ISA doesn't provide ability for
+ * gather load on a byte quantity. So we have to mimic it in SW,
+ * by doing 8x1B scalar loads.
+ */
 static inline ymm_t
 _m512_mask_gather_epi8x8(__m512i pdata, __mmask8 mask)
 {
lib/librte_acl/acl_run_avx512x16.h +4 -4
index 45b0b4db6..df5f6135f 100644
@@ -413,7 +413,7 @@ match_check_process_avx512x16x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[0] != 0) {
 			inp[0] = get_next_bytes_avx512x16(flow, &pdata[0],
-				rm[0], &di[0], sizeof(uint8_t));
+				rm[0], &di[0], flow->first_load_sz);
 			first_trans16(flow, inp[0], rm[0], &tr_lo[0],
 				&tr_hi[0]);
 			rm[0] = _mm512_test_epi32_mask(tr_lo[0],
@@ -422,7 +422,7 @@ match_check_process_avx512x16x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[1] != 0) {
 			inp[1] = get_next_bytes_avx512x16(flow, &pdata[2],
-				rm[1], &di[1], sizeof(uint8_t));
+				rm[1], &di[1], flow->first_load_sz);
 			first_trans16(flow, inp[1], rm[1], &tr_lo[1],
 				&tr_hi[1]);
 			rm[1] = _mm512_test_epi32_mask(tr_lo[1],
@@ -447,9 +447,9 @@ search_trie_avx512x16x2(struct acl_flow_avx512 *flow)
 	start_flow16(flow, MASK16_BIT, UINT16_MAX, &pdata[2], &idx[1], &di[1]);
 
 	in[0] = get_next_bytes_avx512x16(flow, &pdata[0], UINT16_MAX, &di[0],
-		sizeof(uint8_t));
+			flow->first_load_sz);
 	in[1] = get_next_bytes_avx512x16(flow, &pdata[2], UINT16_MAX, &di[1],
-		sizeof(uint8_t));
+			flow->first_load_sz);
 
 	first_trans16(flow, in[0], UINT16_MAX, &tr_lo[0], &tr_hi[0]);
 	first_trans16(flow, in[1], UINT16_MAX, &tr_lo[1], &tr_hi[1]);
lib/librte_acl/acl_run_avx512x8.h +4 -4
index 82171e8e0..777451973 100644
@@ -325,7 +325,7 @@ match_check_process_avx512x8x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[0] != 0) {
 			inp[0] = get_next_bytes_avx512x8(flow, pdata[0], rm[0],
-				&di[0], sizeof(uint8_t));
+				&di[0], flow->first_load_sz);
 			first_trans8(flow, inp[0], rm[0], &tr_lo[0], &tr_hi[0]);
 
 			rm[0] = _mm256_test_epi32_mask(tr_lo[0],
@@ -334,7 +334,7 @@ match_check_process_avx512x8x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[1] != 0) {
 			inp[1] = get_next_bytes_avx512x8(flow, pdata[1], rm[1],
-				&di[1], sizeof(uint8_t));
+				&di[1], flow->first_load_sz);
 			first_trans8(flow, inp[1], rm[1], &tr_lo[1], &tr_hi[1]);
 
 			rm[1] = _mm256_test_epi32_mask(tr_lo[1],
@@ -360,9 +360,9 @@ search_trie_avx512x8x2(struct acl_flow_avx512 *flow)
 	start_flow8(flow, CHAR_BIT, UINT8_MAX, &pdata[1], &idx[1], &di[1]);
 
 	inp[0] = get_next_bytes_avx512x8(flow, pdata[0], UINT8_MAX, &di[0],
-		sizeof(uint8_t));
+			flow->first_load_sz);
 	inp[1] = get_next_bytes_avx512x8(flow, pdata[1], UINT8_MAX, &di[1],
-		sizeof(uint8_t));
+			flow->first_load_sz);
 
 	first_trans8(flow, inp[0], UINT8_MAX, &tr_lo[0], &tr_hi[0]);
 	first_trans8(flow, inp[1], UINT8_MAX, &tr_lo[1], &tr_hi[1]);
lib/librte_acl/rte_acl.c +1 -0
index fdcb7a798..9f16d28ea 100644
@@ -486,6 +486,7 @@ rte_acl_dump(const struct rte_acl_ctx *ctx)
 	printf("acl context <%s>@%p\n", ctx->name, ctx);
 	printf("  socket_id=%"PRId32"\n", ctx->socket_id);
 	printf("  alg=%"PRId32"\n", ctx->alg);
+	printf("  first_load_sz=%"PRIu32"\n", ctx->first_load_sz);
 	printf("  max_rules=%"PRIu32"\n", ctx->max_rules);
 	printf("  rule_size=%"PRIu32"\n", ctx->rule_sz);
 	printf("  num_rules=%"PRIu32"\n", ctx->num_rules);
Signature · 1 line
2.17.1
#24 lore raw

PATCH v2 11/12 test/acl: add AVX512 classify support

In reply to Konstantin Ananyev

Add AVX512 classify to the test coverage.

---
 app/test/test_acl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
app/test/test_acl.c +3 -2
index 333b34757..11d69d2d5 100644
@@ -278,8 +278,8 @@ test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 
 	/* set given classify alg, skip test if alg is not supported */
 	ret = rte_acl_set_ctx_classify(acx, alg);
-	if (ret == -ENOTSUP)
-		return 0;
+	if (ret != 0)
+		return (ret == -ENOTSUP) ? 0 : ret;
 
 	/**
 	 * these will run quite a few times, it's necessary to test code paths
@@ -341,6 +341,7 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 		RTE_ACL_CLASSIFY_AVX2,
 		RTE_ACL_CLASSIFY_NEON,
 		RTE_ACL_CLASSIFY_ALTIVEC,
+		RTE_ACL_CLASSIFY_AVX512,
 	};
 
 	/* swap all bytes in the data to network order */
Signature · 1 line
2.17.1
#25 lore raw

PATCH v2 12/12 app/acl: add AVX512 classify support

In reply to Konstantin Ananyev

Add ability to use AVX512 classify method.

---
 app/test-acl/main.c | 4 ++++
 1 file changed, 4 insertions(+)
app/test-acl/main.c +4 -0
index d9b65517c..19b714335 100644
@@ -81,6 +81,10 @@ static const struct acl_alg acl_alg[] = {
 		.name = "altivec",
 		.alg = RTE_ACL_CLASSIFY_ALTIVEC,
 	},
+	{
+		.name = "avx512",
+		.alg = RTE_ACL_CLASSIFY_AVX512,
+	},
 };
 
 static struct {
Signature · 1 line
2.17.1
#26 lore raw

v3 cover acl: introduce AVX512 classify methods

In reply to Konstantin Ananyev

These patch series introduce support of AVX512 specific classify implementation for ACL library.
It adds two new algorithms:
- RTE_ACL_CLASSIFY_AVX512X16 - can process up to 16 flows in parallel. It uses 256-bit width instructions/registers only
(to avoid frequency level change).
On my SKX box test-acl shows ~15-30% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X16 classify algorithms.
- RTE_ACL_CLASSIFY_AVX512X32 - can process up to 32 flows in parallel. It uses 512-bit width instructions/registers and provides higher performance then AVX512X16, but can cause frequency level change. On my SKX box test-acl shows ~50-70% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X32 classify algorithms. ICX and CLX testing showed similar level of speedup.

Current AVX512 classify implementation is only supported on x86_64. Note that this series introduce a formal ABI incompatibility with previous versions of ACL library.

v2 -> v3:
Fix checkpatch warnings
Split AVX512 algorithm into two and deduplicate common code
v1 -> v2:
Deduplicated 8/16 code paths as much as possible Updated default algorithm selection
Removed library constructor to make it easier integrate with
https://patches.dpdk.org/project/dpdk/list/?series=11831
Updated docs

These patch series depends on:
https://patches.dpdk.org/patch/79310/
to be applied first.

Konstantin Ananyev (14):
acl: fix x86 build when compiler doesn't support AVX2
doc: fix missing classify methods in ACL guide
acl: remove of unused enum value
acl: remove library constructor
app/acl: few small improvements
test/acl: expand classify test coverage
acl: add infrastructure to support AVX512 classify
acl: introduce 256-bit width AVX512 classify implementation
acl: update default classify algorithm selection
acl: introduce 512-bit width AVX512 classify implementation
acl: for AVX512 classify use 4B load whenever possible
acl: deduplicate AVX512 code paths
test/acl: add AVX512 classify support
app/acl: add AVX512 classify support

 app/test-acl/main.c                           |  23 +-
 app/test/test_acl.c                           | 105 ++--
 config/x86/meson.build                        |   3 +-
 .../prog_guide/packet_classif_access_ctrl.rst |  20 +
 doc/guides/rel_notes/deprecation.rst          |   4 -
 doc/guides/rel_notes/release_20_11.rst        |  12 +
 lib/librte_acl/acl.h                          |  16 +
 lib/librte_acl/acl_bld.c                      |  34 ++
 lib/librte_acl/acl_gen.c                      |   2 +-
 lib/librte_acl/acl_run_avx512.c               | 164 ++++++
 lib/librte_acl/acl_run_avx512_common.h        | 477 ++++++++++++++++++
 lib/librte_acl/acl_run_avx512x16.h            | 341 +++++++++++++
 lib/librte_acl/acl_run_avx512x8.h             | 253 ++++++++++
 lib/librte_acl/meson.build                    |  39 ++
 lib/librte_acl/rte_acl.c                      | 212 ++++++--
 lib/librte_acl/rte_acl.h                      |   4 +-
 16 files changed, 1609 insertions(+), 100 deletions(-)
 create mode 100644 lib/librte_acl/acl_run_avx512.c
 create mode 100644 lib/librte_acl/acl_run_avx512_common.h
 create mode 100644 lib/librte_acl/acl_run_avx512x16.h
 create mode 100644 lib/librte_acl/acl_run_avx512x8.h
Signature · 1 line
2.17.1
#27 lore raw

PATCH v3 1/14 acl: fix x86 build when compiler doesn't support AVX2

Right now we define dummy version of rte_acl_classify_avx2() when both X86 and AVX2 are not detected, though it should be for non-AVX2 case only.

Fixes e53ce4e41379 ("acl: remove use of weak functions")
---
 lib/librte_acl/rte_acl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/librte_acl/rte_acl.c +1 -1
index 777ec4d340..715b023592 100644
@@ -16,7 +16,6 @@ static struct rte_tailq_elem rte_acl_tailq = {
 };
 EAL_REGISTER_TAILQ(rte_acl_tailq)
 
-#ifndef RTE_ARCH_X86
 #ifndef CC_AVX2_SUPPORT
 /*
  * If the compiler doesn't support AVX2 instructions,
@@ -33,6 +32,7 @@ rte_acl_classify_avx2(__rte_unused const struct rte_acl_ctx *ctx,
 }
 #endif
 
+#ifndef RTE_ARCH_X86
 int
 rte_acl_classify_sse(__rte_unused const struct rte_acl_ctx *ctx,
 	__rte_unused const uint8_t **data,
Signature · 1 line
2.17.1
#28 lore raw

PATCH v3 2/14 doc: fix missing classify methods in ACL guide

In reply to Konstantin Ananyev

Add brief description for missing ACL classify algorithms:
RTE_ACL_CLASSIFY_NEON and RTE_ACL_CLASSIFY_ALTIVEC.

Fixes 34fa6c27c156 ("acl: add NEON optimization for ARMv8")
Fixes 1d73135f9f1c ("acl: add AltiVec for ppc64")
---
 doc/guides/prog_guide/packet_classif_access_ctrl.rst | 6 ++++++
 1 file changed, 6 insertions(+)
doc/guides/prog_guide/packet_classif_access_ctrl.rst +6 -0
index 0345512b9e..daf03e6d7a 100644
@@ -373,6 +373,12 @@ There are several implementations of classify algorithm:
 
 *   **RTE_ACL_CLASSIFY_AVX2**: vector implementation, can process up to 16 flows in parallel. Requires AVX2 support.
 
+*   **RTE_ACL_CLASSIFY_NEON**: vector implementation, can process up to 8 flows
+    in parallel. Requires NEON support.
+
+*   **RTE_ACL_CLASSIFY_ALTIVEC**: vector implementation, can process up to 8
+    flows in parallel. Requires ALTIVEC support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
Signature · 1 line
2.17.1
#29 lore raw

PATCH v3 3/14 acl: remove of unused enum value

In reply to Konstantin Ananyev

Removal of unused enum value (RTE_ACL_CLASSIFY_NUM). This enum value is not used inside DPDK, while it prevents to add new classify algorithms without causing an ABI breakage.

Note that this change introduce a formal ABI incompatibility with previous versions of ACL library.

---
 doc/guides/rel_notes/deprecation.rst   | 4 ----
 doc/guides/rel_notes/release_20_11.rst | 4 ++++
 lib/librte_acl/rte_acl.h               | 1 -
 3 files changed, 4 insertions(+), 5 deletions(-)
doc/guides/rel_notes/deprecation.rst +0 -4
index 8080a28896..938e967c8f 100644
@@ -209,10 +209,6 @@ Deprecation Notices
   - https://patches.dpdk.org/patch/71457/
   - https://patches.dpdk.org/patch/71456/
 
-* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value will be removed.
-  This enum value is not used inside DPDK, while it prevents to add new
-  classify algorithms without causing an ABI breakage.
-
 * sched: To allow more traffic classes, flexible mapping of pipe queues to
   traffic classes, and subport level configuration of pipes and queues
   changes will be made to macros, data structures and API functions defined
doc/guides/rel_notes/release_20_11.rst +4 -0
index 6d8c24413d..e0de60c0c2 100644
@@ -210,6 +210,10 @@ API Changes
 
 * bpf: ``RTE_BPF_XTYPE_NUM`` has been dropped from ``rte_bpf_xtype``.
 
+* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value has been removed.
+  This enum value was not used inside DPDK, while it prevented to add new
+  classify algorithms without causing an ABI breakage.
+
 
 ABI Changes
 -----------
lib/librte_acl/rte_acl.h +0 -1
index aa22e70c6e..b814423a63 100644
@@ -241,7 +241,6 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
-	RTE_ACL_CLASSIFY_NUM          /* should always be the last one. */
 };
 
 /**
Signature · 1 line
2.17.1
#30 lore raw

PATCH v3 4/14 acl: remove library constructor

In reply to Konstantin Ananyev

Right now ACL library determines best possible (default) classify method on a given platform with specilal constructor function rte_acl_init(). This patch makes the following changes:
- Move selection of default classify method into a separate private function and call it for each ACL context creation (rte_acl_create()).
- Remove library constructor function
- Make rte_acl_set_ctx_classify() to check that requested algorithm is supported on given platform.

The purpose of these changes to improve and simplify algorithm selection process and prepare ACL library to be integrated with:
add max SIMD bitwidth to EAL
(https://patches.dpdk.org/project/dpdk/list/?series=11831)
patch-set

---
 lib/librte_acl/rte_acl.c | 166 ++++++++++++++++++++++++++++++---------
 lib/librte_acl/rte_acl.h |   1 +
 2 files changed, 132 insertions(+), 35 deletions(-)
lib/librte_acl/rte_acl.c +131 -35
index 715b023592..863549a38b 100644
@@ -79,57 +79,153 @@ static const rte_acl_classify_t classify_fns[] = {
 	[RTE_ACL_CLASSIFY_ALTIVEC] = rte_acl_classify_altivec,
 };
 
-/* by default, use always available scalar code path. */
-static enum rte_acl_classify_alg rte_acl_default_classify =
-	RTE_ACL_CLASSIFY_SCALAR;
+/*
+ * Helper function for acl_check_alg.
+ * Check support for ARM specific classify methods.
+ */
+static int
+acl_check_alg_arm(enum rte_acl_classify_alg alg)
+{
+	if (alg == RTE_ACL_CLASSIFY_NEON) {
+#if defined(RTE_ARCH_ARM64)
+		return 0;
+#elif defined(RTE_ARCH_ARM)
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON))
+			return 0;
+		return -ENOTSUP;
+#else
+		return -ENOTSUP;
+#endif
+	}
+
+	return -EINVAL;
+}
 
-static void
-rte_acl_set_default_classify(enum rte_acl_classify_alg alg)
+/*
+ * Helper function for acl_check_alg.
+ * Check support for PPC specific classify methods.
+ */
+static int
+acl_check_alg_ppc(enum rte_acl_classify_alg alg)
 {
-	rte_acl_default_classify = alg;
+	if (alg == RTE_ACL_CLASSIFY_ALTIVEC) {
+#if defined(RTE_ARCH_PPC_64)
+		return 0;
+#else
+		return -ENOTSUP;
+#endif
+	}
+
+	return -EINVAL;
 }
 
-extern int
-rte_acl_set_ctx_classify(struct rte_acl_ctx *ctx, enum rte_acl_classify_alg alg)
+/*
+ * Helper function for acl_check_alg.
+ * Check support for x86 specific classify methods.
+ */
+static int
+acl_check_alg_x86(enum rte_acl_classify_alg alg)
 {
-	if (ctx == NULL || (uint32_t)alg >= RTE_DIM(classify_fns))
-		return -EINVAL;
+	if (alg == RTE_ACL_CLASSIFY_AVX2) {
+#ifdef CC_AVX2_SUPPORT
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
+			return 0;
+#endif
+		return -ENOTSUP;
+	}
 
-	ctx->alg = alg;
-	return 0;
+	if (alg == RTE_ACL_CLASSIFY_SSE) {
+#ifdef RTE_ARCH_X86
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
+			return 0;
+#endif
+		return -ENOTSUP;
+	}
+
+	return -EINVAL;
 }
 
 /*
- * Select highest available classify method as default one.
- * Note that CLASSIFY_AVX2 should be set as a default only
- * if both conditions are met:
- * at build time compiler supports AVX2 and target cpu supports AVX2.
+ * Check if input alg is supported by given platform/binary.
+ * Note that both conditions should be met:
+ * - at build time compiler supports ISA used by given methods
+ * - at run time target cpu supports necessary ISA.
  */
-RTE_INIT(rte_acl_init)
+static int
+acl_check_alg(enum rte_acl_classify_alg alg)
 {
-	enum rte_acl_classify_alg alg = RTE_ACL_CLASSIFY_DEFAULT;
+	switch (alg) {
+	case RTE_ACL_CLASSIFY_NEON:
+		return acl_check_alg_arm(alg);
+	case RTE_ACL_CLASSIFY_ALTIVEC:
+		return acl_check_alg_ppc(alg);
+	case RTE_ACL_CLASSIFY_AVX2:
+	case RTE_ACL_CLASSIFY_SSE:
+		return acl_check_alg_x86(alg);
+	/* scalar method is supported on all platforms */
+	case RTE_ACL_CLASSIFY_SCALAR:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
 
-#if defined(RTE_ARCH_ARM64)
-	alg =  RTE_ACL_CLASSIFY_NEON;
-#elif defined(RTE_ARCH_ARM)
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON))
-		alg =  RTE_ACL_CLASSIFY_NEON;
+/*
+ * Get preferred alg for given platform.
+ */
+static enum rte_acl_classify_alg
+acl_get_best_alg(void)
+{
+	/*
+	 * array of supported methods for each platform.
+	 * Note that order is important - from most to less preferable.
+	 */
+	static const enum rte_acl_classify_alg alg[] = {
+#if defined(RTE_ARCH_ARM)
+		RTE_ACL_CLASSIFY_NEON,
 #elif defined(RTE_ARCH_PPC_64)
-	alg = RTE_ACL_CLASSIFY_ALTIVEC;
-#else
-#ifdef CC_AVX2_SUPPORT
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
-		alg = RTE_ACL_CLASSIFY_AVX2;
-	else if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
-#else
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
+		RTE_ACL_CLASSIFY_ALTIVEC,
+#elif defined(RTE_ARCH_X86)
+		RTE_ACL_CLASSIFY_AVX2,
+		RTE_ACL_CLASSIFY_SSE,
 #endif
-		alg = RTE_ACL_CLASSIFY_SSE;
+		RTE_ACL_CLASSIFY_SCALAR,
+	};
 
-#endif
-	rte_acl_set_default_classify(alg);
+	uint32_t i;
+
+	/* find best possible alg */
+	for (i = 0; i != RTE_DIM(alg) && acl_check_alg(alg[i]) != 0; i++)
+		;
+
+	/* we always have to find something suitable */
+	RTE_VERIFY(i != RTE_DIM(alg));
+	return alg[i];
+}
+
+extern int
+rte_acl_set_ctx_classify(struct rte_acl_ctx *ctx, enum rte_acl_classify_alg alg)
+{
+	int32_t rc;
+
+	/* formal parameters check */
+	if (ctx == NULL || (uint32_t)alg >= RTE_DIM(classify_fns))
+		return -EINVAL;
+
+	/* user asked us to select the *best* one */
+	if (alg == RTE_ACL_CLASSIFY_DEFAULT)
+		alg = acl_get_best_alg();
+
+	/* check that given alg is supported */
+	rc = acl_check_alg(alg);
+	if (rc != 0)
+		return rc;
+
+	ctx->alg = alg;
+	return 0;
 }
 
+
 int
 rte_acl_classify_alg(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories,
@@ -262,7 +358,7 @@ rte_acl_create(const struct rte_acl_param *param)
 		ctx->max_rules = param->max_rule_num;
 		ctx->rule_sz = param->rule_size;
 		ctx->socket_id = param->socket_id;
-		ctx->alg = rte_acl_default_classify;
+		ctx->alg = acl_get_best_alg();
 		strlcpy(ctx->name, param->name, sizeof(ctx->name));
 
 		te->data = (void *) ctx;
lib/librte_acl/rte_acl.h +1 -0
index b814423a63..3999f15ded 100644
@@ -329,6 +329,7 @@ rte_acl_classify_alg(const struct rte_acl_ctx *ctx,
  *   existing algorithm, and that it could be run on the given CPU.
  * @return
  *   - -EINVAL if the parameters are invalid.
+ *   - -ENOTSUP requested algorithm is not supported by given platform.
  *   - Zero if operation completed successfully.
  */
 extern int
Signature · 1 line
2.17.1
#31 lore raw

PATCH v3 5/14 app/acl: few small improvements

In reply to Konstantin Ananyev

- enhance output to print extra stats
- use rte_rdtsc_precise() for cycle measurements

---
 app/test-acl/main.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
app/test-acl/main.c +10 -5
index 0a5dfb621d..d9b65517cb 100644
@@ -862,9 +862,10 @@ search_ip5tuples(__rte_unused void *arg)
 {
 	uint64_t pkt, start, tm;
 	uint32_t i, lcore;
+	long double st;
 
 	lcore = rte_lcore_id();
-	start = rte_rdtsc();
+	start = rte_rdtsc_precise();
 	pkt = 0;
 
 	for (i = 0; i != config.iter_num; i++) {
@@ -872,12 +873,16 @@ search_ip5tuples(__rte_unused void *arg)
 			config.trace_step, config.alg.name);
 	}
 
-	tm = rte_rdtsc() - start;
+	tm = rte_rdtsc_precise() - start;
+
+	st = (long double)tm / rte_get_timer_hz();
 	dump_verbose(DUMP_NONE, stdout,
 		"%s  @lcore %u: %" PRIu32 " iterations, %" PRIu64 " pkts, %"
-		PRIu32 " categories, %" PRIu64 " cycles, %#Lf cycles/pkt\n",
-		__func__, lcore, i, pkt, config.run_categories,
-		tm, (pkt == 0) ? 0 : (long double)tm / pkt);
+		PRIu32 " categories, %" PRIu64 " cycles (%.2Lf sec), "
+		"%.2Lf cycles/pkt, %.2Lf pkt/sec\n",
+		__func__, lcore, i, pkt,
+		config.run_categories, tm, st,
+		(pkt == 0) ? 0 : (long double)tm / pkt, pkt / st);
 
 	return 0;
 }
Signature · 1 line
2.17.1
#32 lore raw

PATCH v3 6/14 test/acl: expand classify test coverage

In reply to Konstantin Ananyev

Make classify test to run for all supported methods.

---
 app/test/test_acl.c | 103 ++++++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 52 deletions(-)
app/test/test_acl.c +51 -52
index 316bf4d065..333b347579 100644
@@ -266,22 +266,20 @@ rte_acl_ipv4vlan_build(struct rte_acl_ctx *ctx,
 }
 
 /*
- * Test scalar and SSE ACL lookup.
+ * Test ACL lookup (selected alg).
  */
 static int
-test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
-	size_t dim)
+test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
+	const uint8_t *data[], size_t dim, enum rte_acl_classify_alg alg)
 {
-	int ret, i;
-	uint32_t result, count;
+	int32_t ret;
+	uint32_t i, result, count;
 	uint32_t results[dim * RTE_ACL_MAX_CATEGORIES];
-	const uint8_t *data[dim];
-	/* swap all bytes in the data to network order */
-	bswap_test_data(test_data, dim, 1);
 
-	/* store pointers to test data */
-	for (i = 0; i < (int) dim; i++)
-		data[i] = (uint8_t *)&test_data[i];
+	/* set given classify alg, skip test if alg is not supported */
+	ret = rte_acl_set_ctx_classify(acx, alg);
+	if (ret == -ENOTSUP)
+		return 0;
 
 	/**
 	 * these will run quite a few times, it's necessary to test code paths
@@ -291,12 +289,13 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 		ret = rte_acl_classify(acx, data, results,
 				count, RTE_ACL_MAX_CATEGORIES);
 		if (ret != 0) {
-			printf("Line %i: SSE classify failed!\n", __LINE__);
-			goto err;
+			printf("Line %i: classify(alg=%d) failed!\n",
+				__LINE__, alg);
+			return ret;
 		}
 
 		/* check if we allow everything we should allow */
-		for (i = 0; i < (int) count; i++) {
+		for (i = 0; i < count; i++) {
 			result =
 				results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW];
 			if (result != test_data[i].allow) {
@@ -304,63 +303,63 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 					"(expected %"PRIu32" got %"PRIu32")!\n",
 					__LINE__, i, test_data[i].allow,
 					result);
-				ret = -EINVAL;
-				goto err;
+				return -EINVAL;
 			}
 		}
 
 		/* check if we deny everything we should deny */
-		for (i = 0; i < (int) count; i++) {
+		for (i = 0; i < count; i++) {
 			result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY];
 			if (result != test_data[i].deny) {
 				printf("Line %i: Error in deny results at %i "
 					"(expected %"PRIu32" got %"PRIu32")!\n",
 					__LINE__, i, test_data[i].deny,
 					result);
-				ret = -EINVAL;
-				goto err;
+				return -EINVAL;
 			}
 		}
 	}
 
-	/* make a quick check for scalar */
-	ret = rte_acl_classify_alg(acx, data, results,
-			dim, RTE_ACL_MAX_CATEGORIES,
-			RTE_ACL_CLASSIFY_SCALAR);
-	if (ret != 0) {
-		printf("Line %i: scalar classify failed!\n", __LINE__);
-		goto err;
-	}
+	/* restore default classify alg */
+	return rte_acl_set_ctx_classify(acx, RTE_ACL_CLASSIFY_DEFAULT);
+}
 
-	/* check if we allow everything we should allow */
-	for (i = 0; i < (int) dim; i++) {
-		result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW];
-		if (result != test_data[i].allow) {
-			printf("Line %i: Error in allow results at %i "
-					"(expected %"PRIu32" got %"PRIu32")!\n",
-					__LINE__, i, test_data[i].allow,
-					result);
-			ret = -EINVAL;
-			goto err;
-		}
-	}
+/*
+ * Test ACL lookup (all possible methods).
+ */
+static int
+test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
+	size_t dim)
+{
+	int32_t ret;
+	uint32_t i;
+	const uint8_t *data[dim];
 
-	/* check if we deny everything we should deny */
-	for (i = 0; i < (int) dim; i++) {
-		result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY];
-		if (result != test_data[i].deny) {
-			printf("Line %i: Error in deny results at %i "
-					"(expected %"PRIu32" got %"PRIu32")!\n",
-					__LINE__, i, test_data[i].deny,
-					result);
-			ret = -EINVAL;
-			goto err;
-		}
-	}
+	static const enum rte_acl_classify_alg alg[] = {
+		RTE_ACL_CLASSIFY_SCALAR,
+		RTE_ACL_CLASSIFY_SSE,
+		RTE_ACL_CLASSIFY_AVX2,
+		RTE_ACL_CLASSIFY_NEON,
+		RTE_ACL_CLASSIFY_ALTIVEC,
+	};
+
+	/* swap all bytes in the data to network order */
+	bswap_test_data(test_data, dim, 1);
+
+	/* store pointers to test data */
+	for (i = 0; i < dim; i++)
+		data[i] = (uint8_t *)&test_data[i];
 
 	ret = 0;
+	for (i = 0; i != RTE_DIM(alg); i++) {
+		ret = test_classify_alg(acx, test_data, data, dim, alg[i]);
+		if (ret < 0) {
+			printf("Line %i: %s() for alg=%d failed, errno=%d\n",
+				__LINE__, __func__, alg[i], -ret);
+			break;
+		}
+	}
 
-err:
 	/* swap data back to cpu order so that next time tests don't fail */
 	bswap_test_data(test_data, dim, 0);
 	return ret;
Signature · 1 line
2.17.1
#33 lore raw

PATCH v3 7/14 acl: add infrastructure to support AVX512 classify

In reply to Konstantin Ananyev

Add necessary changes to support new AVX512 specific ACL classify algorithm:
- changes in meson.build to check that build tools (compiler, assembler, etc.) do properly support AVX512.
- run-time checks to make sure target platform does support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512 implementation couldn't be properly supported.

---
 config/x86/meson.build          |  3 ++-
 lib/librte_acl/acl.h            |  8 +++++++
 lib/librte_acl/acl_run_avx512.c | 29 +++++++++++++++++++++++
 lib/librte_acl/meson.build      | 39 ++++++++++++++++++++++++++++++
 lib/librte_acl/rte_acl.c        | 42 +++++++++++++++++++++++++++++++++
 lib/librte_acl/rte_acl.h        |  2 ++
 6 files changed, 122 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512.c
config/x86/meson.build +2 -1
index fea4d54035..724e69f4c4 100644
@@ -22,7 +22,8 @@ foreach f:base_flags
 endforeach
 
 optional_flags = ['AES', 'PCLMUL',
-		'AVX', 'AVX2', 'AVX512F',
+		'AVX', 'AVX2',
+		'AVX512F', 'AVX512VL', 'AVX512CD', 'AVX512BW',
 		'RDRND', 'RDSEED']
 foreach f:optional_flags
 	if cc.get_define('__@0@__'.format(f), args: machine_args) == '1'
lib/librte_acl/acl.h +8 -0
index 39d45a0c2b..543ce55659 100644
@@ -201,6 +201,14 @@ int
 rte_acl_classify_avx2(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories);
 
+int
+rte_acl_classify_avx512x16(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories);
+
+int
+rte_acl_classify_avx512x32(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories);
+
 int
 rte_acl_classify_neon(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories);
lib/librte_acl/acl_run_avx512.c new file +29 -0
new file mode 100644
index 0000000000..1817f88b29
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#include "acl_run_sse.h"
+
+int
+rte_acl_classify_avx512x16(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories)
+{
+	if (num >= MAX_SEARCHES_SSE8)
+		return search_sse_8(ctx, data, results, num, categories);
+	if (num >= MAX_SEARCHES_SSE4)
+		return search_sse_4(ctx, data, results, num, categories);
+
+	return rte_acl_classify_scalar(ctx, data, results, num, categories);
+}
+
+int
+rte_acl_classify_avx512x32(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories)
+{
+	if (num >= MAX_SEARCHES_SSE8)
+		return search_sse_8(ctx, data, results, num, categories);
+	if (num >= MAX_SEARCHES_SSE4)
+		return search_sse_4(ctx, data, results, num, categories);
+
+	return rte_acl_classify_scalar(ctx, data, results, num, categories);
+}
lib/librte_acl/meson.build +39 -0
index b31a3f798e..30cdb8b761 100644
@@ -27,6 +27,45 @@ if dpdk_conf.has('RTE_ARCH_X86')
 		cflags += '-DCC_AVX2_SUPPORT'
 	endif
 
+	# compile AVX512 version if:
+	# we are building 64-bit binary AND binutils can generate proper code
+
+	if dpdk_conf.has('RTE_ARCH_X86_64') and binutils_ok.returncode() == 0
+
+		# compile AVX512 version if either:
+		# a. we have AVX512 supported in minimum instruction set
+		#    baseline
+		# b. it's not minimum instruction set, but supported by
+		#    compiler
+		#
+		# in former case, just add avx512 C file to files list
+		# in latter case, compile c file to static lib, using correct
+		# compiler flags, and then have the .o file from static lib
+		# linked into main lib.
+
+		if dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512F') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512VL') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512CD') and \
+			dpdk_conf.has('RTE_MACHINE_CPUFLAG_AVX512BW')
+
+			sources += files('acl_run_avx512.c')
+			cflags += '-DCC_AVX512_SUPPORT'
+
+		elif cc.has_multi_arguments('-mavx512f', '-mavx512vl',
+					'-mavx512cd', '-mavx512bw')
+
+			avx512_tmplib = static_library('avx512_tmp',
+				'acl_run_avx512.c',
+				dependencies: static_rte_eal,
+				c_args: cflags +
+					['-mavx512f', '-mavx512vl',
+					 '-mavx512cd', '-mavx512bw'])
+			objs += avx512_tmplib.extract_objects(
+					'acl_run_avx512.c')
+			cflags += '-DCC_AVX512_SUPPORT'
+		endif
+	endif
+
 elif dpdk_conf.has('RTE_ARCH_ARM') or dpdk_conf.has('RTE_ARCH_ARM64')
 	cflags += '-flax-vector-conversions'
 	sources += files('acl_run_neon.c')
lib/librte_acl/rte_acl.c +42 -0

66 lines not on this page · raw message

lib/librte_acl/rte_acl.h +2 -0
index 3999f15ded..1bfed00743 100644
@@ -241,6 +241,8 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
+	RTE_ACL_CLASSIFY_AVX512X16 = 6,  /**< requires AVX512 support. */
+	RTE_ACL_CLASSIFY_AVX512X32 = 7,  /**< requires AVX512 support. */
 };
 
 /**
Signature · 1 line
2.17.1
#34 lore raw

PATCH v3 8/14 acl: introduce 256-bit width AVX512 classify implementation

In reply to Konstantin Ananyev

Introduce classify implementation that uses AVX512 specific ISA. rte_acl_classify_avx512x16() is able to process up to 16 flows in parallel. It uses 256-bit width registers/instructions only
(to avoid frequency level change).
Note that for now only 64-bit version is supported.

---
 .../prog_guide/packet_classif_access_ctrl.rst |   4 +
 doc/guides/rel_notes/release_20_11.rst        |   5 +
 lib/librte_acl/acl.h                          |   7 +
 lib/librte_acl/acl_gen.c                      |   2 +-
 lib/librte_acl/acl_run_avx512.c               | 129 ++++
 lib/librte_acl/acl_run_avx512x8.h             | 642 ++++++++++++++++++
 6 files changed, 788 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512x8.h
doc/guides/prog_guide/packet_classif_access_ctrl.rst +4 -0
index daf03e6d7a..11f4bc841b 100644
@@ -379,6 +379,10 @@ There are several implementations of classify algorithm:
 *   **RTE_ACL_CLASSIFY_ALTIVEC**: vector implementation, can process up to 8
     flows in parallel. Requires ALTIVEC support.
 
+*   **RTE_ACL_CLASSIFY_AVX512X16**: vector implementation, can process up to 16
+    flows in parallel. Uses 256-bit width SIMD registers.
+    Requires AVX512 support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
doc/guides/rel_notes/release_20_11.rst +5 -0
index e0de60c0c2..95d7bfd777 100644
@@ -107,6 +107,11 @@ New Features
   * Extern objects and functions can be plugged into the pipeline.
   * Transaction-oriented table updates.
 
+* **Add new AVX512 specific classify algorithms for ACL library.**
+
+  * Added new ``RTE_ACL_CLASSIFY_AVX512X16`` vector implementation,
+    which can process up to 16 flows in parallel. Requires AVX512 support.
+
 
 Removed Items
 -------------
lib/librte_acl/acl.h +7 -0
index 543ce55659..7ac0d12f08 100644
@@ -76,6 +76,13 @@ struct rte_acl_bitset {
  * input_byte - ((uint8_t *)&transition)[4 + input_byte / 64].
  */
 
+/*
+ * Each ACL RT contains an idle nomatch node:
+ * a SINGLE node at predefined position (RTE_ACL_DFA_SIZE)
+ * that points to itself.
+ */
+#define RTE_ACL_IDLE_NODE	(RTE_ACL_DFA_SIZE | RTE_ACL_NODE_SINGLE)
+
 /*
  * Structure of a node is a set of ptrs and each ptr has a bit map
  * of values associated with this transition.
lib/librte_acl/acl_gen.c +1 -1
index f1b9d12f1e..e759a2ca15 100644
@@ -496,7 +496,7 @@ rte_acl_gen(struct rte_acl_ctx *ctx, struct rte_acl_trie *trie,
 	 * highest index, that points to itself)
 	 */
 
-	node_array[RTE_ACL_DFA_SIZE] = RTE_ACL_DFA_SIZE | RTE_ACL_NODE_SINGLE;
+	node_array[RTE_ACL_DFA_SIZE] = RTE_ACL_IDLE_NODE;
 
 	for (n = 0; n < RTE_ACL_DFA_SIZE; n++)
 		node_array[n] = no_match;
lib/librte_acl/acl_run_avx512.c +129 -0

145 lines not on this page · raw message

lib/librte_acl/acl_run_avx512x8.h new file +642 -0

642 lines not on this page · raw message

Signature · 1 line
2.17.1
#35 lore raw

PATCH v3 9/14 acl: update default classify algorithm selection

In reply to Konstantin Ananyev

On supported platforms, set RTE_ACL_CLASSIFY_AVX512X16 as default ACL classify algorithm.
Note that AVX512X16 implementation uses 256-bit registers/instincts only to avoid possibility of frequency drop.

---
 lib/librte_acl/rte_acl.c | 1 +
 1 file changed, 1 insertion(+)
lib/librte_acl/rte_acl.c +1 -0
index 1154f35107..245af672ee 100644
@@ -228,6 +228,7 @@ acl_get_best_alg(void)
 #elif defined(RTE_ARCH_PPC_64)
 		RTE_ACL_CLASSIFY_ALTIVEC,
 #elif defined(RTE_ARCH_X86)
+		RTE_ACL_CLASSIFY_AVX512X16,
 		RTE_ACL_CLASSIFY_AVX2,
 		RTE_ACL_CLASSIFY_SSE,
 #endif
Signature · 1 line
2.17.1
#36 lore raw

PATCH v3 10/14 acl: introduce 512-bit width AVX512 classify implementation

In reply to Konstantin Ananyev

Introduce classify implementation that uses AVX512 specific ISA. rte_acl_classify_avx512x32() is able to process up to 32 flows in parallel. It uses 512-bit width registers/instructions and provides higher performance then rte_acl_classify_avx512x16(), but can cause frequency level change.
Note that for now only 64-bit version is supported.

---

These patch depends on:
https://patches.dpdk.org/patch/79310/
to be applied first.

 .../prog_guide/packet_classif_access_ctrl.rst |  10 +
 doc/guides/rel_notes/release_20_11.rst        |   3 +
 lib/librte_acl/acl_run_avx512.c               |   6 +-
 lib/librte_acl/acl_run_avx512x16.h            | 732 ++++++++++++++++++
 4 files changed, 750 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512x16.h
doc/guides/prog_guide/packet_classif_access_ctrl.rst +10 -0
index 11f4bc841b..7659af8eb5 100644
@@ -383,10 +383,20 @@ There are several implementations of classify algorithm:
     flows in parallel. Uses 256-bit width SIMD registers.
     Requires AVX512 support.
 
+*   **RTE_ACL_CLASSIFY_AVX512X32**: vector implementation, can process up to 32
+    flows in parallel. Uses 512-bit width SIMD registers.
+    Requires AVX512 support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
 
+.. note::
+
+     Right now ``RTE_ACL_CLASSIFY_AVX512X32`` is not selected by default
+     (due to possible frequency level change), but it can be selected at
+     runtime by apps through the use of ACL API: ``rte_acl_set_ctx_classify``.
+
 Application Programming Interface (API) Usage
 ---------------------------------------------
 
doc/guides/rel_notes/release_20_11.rst +3 -0
index 95d7bfd777..001e46f595 100644
@@ -112,6 +112,9 @@ New Features
   * Added new ``RTE_ACL_CLASSIFY_AVX512X16`` vector implementation,
     which can process up to 16 flows in parallel. Requires AVX512 support.
 
+  * Added new ``RTE_ACL_CLASSIFY_AVX512X32`` vector implementation,
+    which can process up to 32 flows in parallel. Requires AVX512 support.
+
 
 Removed Items
 -------------
lib/librte_acl/acl_run_avx512.c +5 -1
index f5bc628b7c..74698fa2ea 100644
@@ -132,6 +132,8 @@ rte_acl_classify_avx512x16(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	return rte_acl_classify_scalar(ctx, data, results, num, categories);
 }
 
+#include "acl_run_avx512x16.h"
+
 int
 rte_acl_classify_avx512x32(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories)
@@ -140,13 +142,15 @@ rte_acl_classify_avx512x32(const struct rte_acl_ctx *ctx, const uint8_t **data,
 
 	/* split huge lookup (gt 256) into series of fixed size ones */
 	while (num > max_iter) {
-		search_avx512x8x2(ctx, data, results, max_iter, categories);
+		search_avx512x16x2(ctx, data, results, max_iter, categories);
 		data += max_iter;
 		results += max_iter * categories;
 		num -= max_iter;
 	}
 
 	/* select classify method based on number of remaining requests */
+	if (num >= 2 * MAX_SEARCHES_AVX16)
+		return search_avx512x16x2(ctx, data, results, num, categories);
 	if (num >= MAX_SEARCHES_AVX16)
 		return search_avx512x8x2(ctx, data, results, num, categories);
 	if (num >= MAX_SEARCHES_SSE8)
lib/librte_acl/acl_run_avx512x16.h new file +732 -0

732 lines not on this page · raw message

Signature · 1 line
2.17.1
#37 lore raw

PATCH v3 11/14 acl: for AVX512 classify use 4B load whenever possible

In reply to Konstantin Ananyev

With current ACL implementation first field in the rule definition has always to be one byte long. Though for optimising classify implementation it might be useful to do 4B reads
(as we do for rest of the fields).
So at build phase, check user provided field definitions to determine is it safe to do 4B loads for first ACL field.
Then at run-time this information can be used to choose classify behavior.

---
 lib/librte_acl/acl.h               |  1 +
 lib/librte_acl/acl_bld.c           | 34 ++++++++++++++++++++++++++++++
 lib/librte_acl/acl_run_avx512.c    |  2 ++
 lib/librte_acl/acl_run_avx512x16.h |  8 +++----
 lib/librte_acl/acl_run_avx512x8.h  |  8 +++----
 lib/librte_acl/rte_acl.c           |  1 +
 6 files changed, 46 insertions(+), 8 deletions(-)
lib/librte_acl/acl.h +1 -0
index 7ac0d12f08..4089ab2a04 100644
@@ -169,6 +169,7 @@ struct rte_acl_ctx {
 	int32_t             socket_id;
 	/** Socket ID to allocate memory from. */
 	enum rte_acl_classify_alg alg;
+	uint32_t           first_load_sz;
 	void               *rules;
 	uint32_t            max_rules;
 	uint32_t            rule_sz;
lib/librte_acl/acl_bld.c +34 -0
index d1f920b09c..da10864cd8 100644
@@ -1581,6 +1581,37 @@ acl_check_bld_param(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 	return 0;
 }
 
+/*
+ * With current ACL implementation first field in the rule definition
+ * has always to be one byte long. Though for optimising *classify*
+ * implementation it might be useful to be able to use 4B reads
+ * (as we do for rest of the fields).
+ * This function checks input config to determine is it safe to do 4B
+ * loads for first ACL field. For that we need to make sure that
+ * first field in our rule definition doesn't have the biggest offset,
+ * i.e. we still do have other fields located after the first one.
+ * Contrary if first field has the largest offset, then it means
+ * first field can occupy the very last byte in the input data buffer,
+ * and we have to do single byte load for it.
+ */
+static uint32_t
+get_first_load_size(const struct rte_acl_config *cfg)
+{
+	uint32_t i, max_ofs, ofs;
+
+	ofs = 0;
+	max_ofs = 0;
+
+	for (i = 0; i != cfg->num_fields; i++) {
+		if (cfg->defs[i].field_index == 0)
+			ofs = cfg->defs[i].offset;
+		else if (max_ofs < cfg->defs[i].offset)
+			max_ofs = cfg->defs[i].offset;
+	}
+
+	return (ofs < max_ofs) ? sizeof(uint32_t) : sizeof(uint8_t);
+}
+
 int
 rte_acl_build(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 {
@@ -1618,6 +1649,9 @@ rte_acl_build(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 				/* set data indexes. */
 				acl_set_data_indexes(ctx);
 
+				/* determine can we always do 4B load */
+				ctx->first_load_sz = get_first_load_size(cfg);
+
 				/* copy in build config. */
 				ctx->config = *cfg;
 			}
lib/librte_acl/acl_run_avx512.c +2 -0
index 74698fa2ea..3fd1e33c3f 100644
@@ -11,6 +11,7 @@ struct acl_flow_avx512 {
 	uint32_t num_packets;       /* number of packets processed */
 	uint32_t total_packets;     /* max number of packets to process */
 	uint32_t root_index;        /* current root index */
+	uint32_t first_load_sz;     /* first load size for new packet */
 	const uint64_t *trans;      /* transition table */
 	const uint32_t *data_index; /* input data indexes */
 	const uint8_t **idata;      /* input data */
@@ -24,6 +25,7 @@ acl_set_flow_avx512(struct acl_flow_avx512 *flow, const struct rte_acl_ctx *ctx,
 {
 	flow->num_packets = 0;
 	flow->total_packets = total_packets;
+	flow->first_load_sz = ctx->first_load_sz;
 	flow->root_index = ctx->trie[trie].root_index;
 	flow->trans = ctx->trans_table;
 	flow->data_index = ctx->trie[trie].data_index;
lib/librte_acl/acl_run_avx512x16.h +4 -4
index 981f8d16da..a39df8f3c0 100644
@@ -460,7 +460,7 @@ match_check_process_avx512x16x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[0] != 0) {
 			inp[0] = get_next_bytes_avx512x16(flow, &pdata[0],
-				rm[0], &di[0], sizeof(uint8_t));
+				rm[0], &di[0], flow->first_load_sz);
 			first_trans16(flow, inp[0], rm[0], &tr_lo[0],
 				&tr_hi[0]);
 			rm[0] = _mm512_test_epi32_mask(tr_lo[0],
@@ -469,7 +469,7 @@ match_check_process_avx512x16x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[1] != 0) {
 			inp[1] = get_next_bytes_avx512x16(flow, &pdata[2],
-				rm[1], &di[1], sizeof(uint8_t));
+				rm[1], &di[1], flow->first_load_sz);
 			first_trans16(flow, inp[1], rm[1], &tr_lo[1],
 				&tr_hi[1]);
 			rm[1] = _mm512_test_epi32_mask(tr_lo[1],
@@ -494,9 +494,9 @@ search_trie_avx512x16x2(struct acl_flow_avx512 *flow)
 	start_flow16(flow, MASK16_BIT, UINT16_MAX, &pdata[2], &idx[1], &di[1]);
 
 	in[0] = get_next_bytes_avx512x16(flow, &pdata[0], UINT16_MAX, &di[0],
-			sizeof(uint8_t));
+			flow->first_load_sz);
 	in[1] = get_next_bytes_avx512x16(flow, &pdata[2], UINT16_MAX, &di[1],
-			sizeof(uint8_t));
+			flow->first_load_sz);
 
 	first_trans16(flow, in[0], UINT16_MAX, &tr_lo[0], &tr_hi[0]);
 	first_trans16(flow, in[1], UINT16_MAX, &tr_lo[1], &tr_hi[1]);
lib/librte_acl/acl_run_avx512x8.h +4 -4
index cfba0299ed..fedd79b9ae 100644
@@ -418,7 +418,7 @@ match_check_process_avx512x8x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[0] != 0) {
 			inp[0] = get_next_bytes_avx512x8(flow, &pdata[0],
-				rm[0], &di[0], sizeof(uint8_t));
+				rm[0], &di[0], flow->first_load_sz);
 			first_trans8(flow, inp[0], rm[0], &tr_lo[0],
 				&tr_hi[0]);
 			rm[0] = _mm256_test_epi32_mask(tr_lo[0],
@@ -427,7 +427,7 @@ match_check_process_avx512x8x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[1] != 0) {
 			inp[1] = get_next_bytes_avx512x8(flow, &pdata[2],
-				rm[1], &di[1], sizeof(uint8_t));
+				rm[1], &di[1], flow->first_load_sz);
 			first_trans8(flow, inp[1], rm[1], &tr_lo[1],
 				&tr_hi[1]);
 			rm[1] = _mm256_test_epi32_mask(tr_lo[1],
@@ -452,9 +452,9 @@ search_trie_avx512x8x2(struct acl_flow_avx512 *flow)
 	start_flow8(flow, MASK8_BIT, UINT8_MAX, &pdata[2], &idx[1], &di[1]);
 
 	in[0] = get_next_bytes_avx512x8(flow, &pdata[0], UINT8_MAX, &di[0],
-			sizeof(uint8_t));
+			flow->first_load_sz);
 	in[1] = get_next_bytes_avx512x8(flow, &pdata[2], UINT8_MAX, &di[1],
-			sizeof(uint8_t));
+			flow->first_load_sz);
 
 	first_trans8(flow, in[0], UINT8_MAX, &tr_lo[0], &tr_hi[0]);
 	first_trans8(flow, in[1], UINT8_MAX, &tr_lo[1], &tr_hi[1]);
lib/librte_acl/rte_acl.c +1 -0
index 245af672ee..f1474038e5 100644
@@ -500,6 +500,7 @@ rte_acl_dump(const struct rte_acl_ctx *ctx)
 	printf("acl context <%s>@%p\n", ctx->name, ctx);
 	printf("  socket_id=%"PRId32"\n", ctx->socket_id);
 	printf("  alg=%"PRId32"\n", ctx->alg);
+	printf("  first_load_sz=%"PRIu32"\n", ctx->first_load_sz);
 	printf("  max_rules=%"PRIu32"\n", ctx->max_rules);
 	printf("  rule_size=%"PRIu32"\n", ctx->rule_sz);
 	printf("  num_rules=%"PRIu32"\n", ctx->num_rules);
Signature · 1 line
2.17.1
#38 lore raw

PATCH v3 12/14 acl: deduplicate AVX512 code paths

In reply to Konstantin Ananyev

Current rte_acl_classify_avx512x32() and rte_acl_classify_avx512x16() code paths are very similar. The only differences are due to 256/512 register/instrincts naming conventions.
So to deduplicate the code:
- Move common code into “acl_run_avx512_common.h”
- Use macros to hide difference in naming conventions

---
 lib/librte_acl/acl_run_avx512_common.h | 477 +++++++++++++++++++++
 lib/librte_acl/acl_run_avx512x16.h     | 569 ++++---------------------
 lib/librte_acl/acl_run_avx512x8.h      | 565 ++++--------------------
 3 files changed, 654 insertions(+), 957 deletions(-)
 create mode 100644 lib/librte_acl/acl_run_avx512_common.h
lib/librte_acl/acl_run_avx512_common.h new file +477 -0
new file mode 100644
index 0000000000..a1c6c6597b
@@ -0,0 +1,477 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+/*
+ * WARNING: It is not recommended to include this file directly.
+ * Please include "acl_run_avx512x*.h" instead.
+ * To make this file to generate proper code an includer has to
+ * define several macros, refer to "acl_run_avx512x*.h" for more details.
+ */
+
+/*
+ * Calculate the address of the next transition for
+ * all types of nodes. Note that only DFA nodes and range
+ * nodes actually transition to another node. Match
+ * nodes not supposed to be encountered here.
+ * For quad range nodes:
+ * Calculate number of range boundaries that are less than the
+ * input value. Range boundaries for each node are in signed 8 bit,
+ * ordered from -128 to 127.
+ * This is effectively a popcnt of bytes that are greater than the
+ * input byte.
+ * Single nodes are processed in the same ways as quad range nodes.
+ */
+static __rte_always_inline _T_simd
+_F_(calc_addr)(_T_simd index_mask, _T_simd next_input, _T_simd shuffle_input,
+	_T_simd four_32, _T_simd range_base, _T_simd tr_lo, _T_simd tr_hi)
+{
+	__mmask64 qm;
+	_T_mask dfa_msk;
+	_T_simd addr, in, node_type, r, t;
+	_T_simd dfa_ofs, quad_ofs;
+
+	t = _M_SI_(xor)(index_mask, index_mask);
+	in = _M_I_(shuffle_epi8)(next_input, shuffle_input);
+
+	/* Calc node type and node addr */
+	node_type = _M_SI_(andnot)(index_mask, tr_lo);
+	addr = _M_SI_(and)(index_mask, tr_lo);
+
+	/* mask for DFA type(0) nodes */
+	dfa_msk = _M_I_(cmpeq_epi32_mask)(node_type, t);
+
+	/* DFA calculations. */
+	r = _M_I_(srli_epi32)(in, 30);
+	r = _M_I_(add_epi8)(r, range_base);
+	t = _M_I_(srli_epi32)(in, 24);
+	r = _M_I_(shuffle_epi8)(tr_hi, r);
+
+	dfa_ofs = _M_I_(sub_epi32)(t, r);
+
+	/* QUAD/SINGLE calculations. */
+	qm = _M_I_(cmpgt_epi8_mask)(in, tr_hi);
+	t = _M_I_(maskz_set1_epi8)(qm, (uint8_t)UINT8_MAX);
+	t = _M_I_(lzcnt_epi32)(t);
+	t = _M_I_(srli_epi32)(t, 3);
+	quad_ofs = _M_I_(sub_epi32)(four_32, t);
+
+	/* blend DFA and QUAD/SINGLE. */
+	t = _M_I_(mask_mov_epi32)(quad_ofs, dfa_msk, dfa_ofs);
+
+	/* calculate address for next transitions. */
+	addr = _M_I_(add_epi32)(addr, t);
+	return addr;
+}
+
+/*
+ * Process _N_ transitions in parallel.
+ * tr_lo contains low 32 bits for _N_ transition.
+ * tr_hi contains high 32 bits for _N_ transition.
+ * next_input contains up to 4 input bytes for _N_ flows.
+ */
+static __rte_always_inline _T_simd
+_F_(trans)(_T_simd next_input, const uint64_t *trans, _T_simd *tr_lo,
+	_T_simd *tr_hi)
+{
+	const int32_t *tr;
+	_T_simd addr;
+
+	tr = (const int32_t *)(uintptr_t)trans;
+
+	/* Calculate the address (array index) for all _N_ transitions. */
+	addr = _F_(calc_addr)(_SV_(index_mask), next_input, _SV_(shuffle_input),
+		_SV_(four_32), _SV_(range_base), *tr_lo, *tr_hi);
+
+	/* load lower 32 bits of _N_ transactions at once. */
+	*tr_lo = _M_GI_(i32gather_epi32, addr, tr, sizeof(trans[0]));
+
+	next_input = _M_I_(srli_epi32)(next_input, CHAR_BIT);
+
+	/* load high 32 bits of _N_ transactions at once. */
+	*tr_hi = _M_GI_(i32gather_epi32, addr, (tr + 1), sizeof(trans[0]));
+
+	return next_input;
+}
+
+/*
+ * Execute first transition for up to _N_ flows in parallel.
+ * next_input should contain one input byte for up to _N_ flows.
+ * msk - mask of active flows.
+ * tr_lo contains low 32 bits for up to _N_ transitions.
+ * tr_hi contains high 32 bits for up to _N_ transitions.
+ */
+static __rte_always_inline void
+_F_(first_trans)(const struct acl_flow_avx512 *flow, _T_simd next_input,
+	_T_mask msk, _T_simd *tr_lo, _T_simd *tr_hi)
+{
+	const int32_t *tr;
+	_T_simd addr, root;
+
+	tr = (const int32_t *)(uintptr_t)flow->trans;
+
+	addr = _M_I_(set1_epi32)(UINT8_MAX);
+	root = _M_I_(set1_epi32)(flow->root_index);
+
+	addr = _M_SI_(and)(next_input, addr);
+	addr = _M_I_(add_epi32)(root, addr);
+
+	/* load lower 32 bits of _N_ transactions at once. */
+	*tr_lo = _M_MGI_(mask_i32gather_epi32)(*tr_lo, msk, addr, tr,
+		sizeof(flow->trans[0]));
+
+	/* load high 32 bits of _N_ transactions at once. */
+	*tr_hi = _M_MGI_(mask_i32gather_epi32)(*tr_hi, msk, addr, (tr + 1),
+		sizeof(flow->trans[0]));
+}
+
+/*
+ * Load and return next 4 input bytes for up to _N_ flows in parallel.
+ * pdata - 8x2 pointers to flow input data
+ * mask - mask of active flows.
+ * di - data indexes for these _N_ flows.
+ */
+static inline _T_simd
+_F_(get_next_bytes)(const struct acl_flow_avx512 *flow, _T_simd pdata[2],
+	uint32_t msk, _T_simd *di, uint32_t bnum)
+{
+	const int32_t *div;
+	uint32_t m[2];
+	_T_simd one, zero, t, p[2];
+
+	div = (const int32_t *)flow->data_index;
+
+	one = _M_I_(set1_epi32)(1);
+	zero = _M_SI_(xor)(one, one);
+
+	/* load data offsets for given indexes */
+	t = _M_MGI_(mask_i32gather_epi32)(zero, msk, *di, div, sizeof(div[0]));
+
+	/* increment data indexes */
+	*di = _M_I_(mask_add_epi32)(*di, msk, *di, one);
+
+	/*
+	 * unsigned expand 32-bit indexes to 64-bit
+	 * (for later pointer arithmetic), i.e:
+	 * for (i = 0; i != _N_; i++)
+	 *   p[i/8].u64[i%8] = (uint64_t)t.u32[i];
+	 */
+	p[0] = _M_I_(maskz_permutexvar_epi32)(_SC_(pmidx_msk), _SV_(pmidx[0]),
+			t);
+	p[1] = _M_I_(maskz_permutexvar_epi32)(_SC_(pmidx_msk), _SV_(pmidx[1]),
+			t);
+
+	p[0] = _M_I_(add_epi64)(p[0], pdata[0]);
+	p[1] = _M_I_(add_epi64)(p[1], pdata[1]);
+
+	/* load input byte(s), either one or four */
+
+	m[0] = msk & _SIMD_PTR_MSK_;
+	m[1] = msk >> _SIMD_PTR_NUM_;
+
+	return _F_(gather_bytes)(zero, p, m, bnum);
+}
+
+/*
+ * Start up to _N_ new flows.
+ * num - number of flows to start
+ * msk - mask of new flows.
+ * pdata - pointers to flow input data
+ * idx - match indexed for given flows
+ * di - data indexes for these flows.
+ */
+static inline void
+_F_(start_flow)(struct acl_flow_avx512 *flow, uint32_t num, uint32_t msk,
+	_T_simd pdata[2], _T_simd *idx, _T_simd *di)
+{
+	uint32_t n, m[2], nm[2];
+	_T_simd ni, nd[2];
+
+	/* split mask into two - one for each pdata[] */
+	m[0] = msk & _SIMD_PTR_MSK_;
+	m[1] = msk >> _SIMD_PTR_NUM_;
+
+	/* caluclate masks for new flows */
+	n = __builtin_popcount(m[0]);
+	nm[0] = (1 << n) - 1;
+	nm[1] = (1 << (num - n)) - 1;
+
+	/* load input data pointers for new flows */
+	nd[0] = _M_I_(maskz_loadu_epi64)(nm[0],
+			flow->idata + flow->num_packets);
+	nd[1] = _M_I_(maskz_loadu_epi64)(nm[1],
+			flow->idata + flow->num_packets + n);
+
+	/* calculate match indexes of new flows */
+	ni = _M_I_(set1_epi32)(flow->num_packets);
+	ni = _M_I_(add_epi32)(ni, _SV_(idx_add));
+
+	/* merge new and existing flows data */
+	pdata[0] = _M_I_(mask_expand_epi64)(pdata[0], m[0], nd[0]);
+	pdata[1] = _M_I_(mask_expand_epi64)(pdata[1], m[1], nd[1]);
+
+	/* update match and data indexes */
+	*idx = _M_I_(mask_expand_epi32)(*idx, msk, ni);
+	*di = _M_I_(maskz_mov_epi32)(msk ^ _SIMD_MASK_MAX_, *di);
+
+	flow->num_packets += num;
+}
+
+/*
+ * Process found matches for up to _N_ flows.
+ * fmsk - mask of active flows
+ * rmsk - mask of found matches
+ * pdata - pointers to flow input data
+ * di - data indexes for these flows
+ * idx - match indexed for given flows
+ * tr_lo contains low 32 bits for up to _N_ transitions.
+ * tr_hi contains high 32 bits for up to _N_ transitions.
+ */
+static inline uint32_t
+_F_(match_process)(struct acl_flow_avx512 *flow, uint32_t *fmsk,
+	uint32_t *rmsk, _T_simd pdata[2], _T_simd *di, _T_simd *idx,
+	_T_simd *tr_lo, _T_simd *tr_hi)
+{
+	uint32_t n;
+	_T_simd res;
+
+	if (rmsk[0] == 0)
+		return 0;
+
+	/* extract match indexes */
+	res = _M_SI_(and)(tr_lo[0], _SV_(index_mask));
+
+	/* mask  matched transitions to nop */
+	tr_lo[0] = _M_I_(mask_mov_epi32)(tr_lo[0], rmsk[0], _SV_(trlo_idle));
+	tr_hi[0] = _M_I_(mask_mov_epi32)(tr_hi[0], rmsk[0], _SV_(trhi_idle));
+
+	/* save found match indexes */
+	_M_I_(mask_i32scatter_epi32)(flow->matches, rmsk[0], idx[0], res,
+			sizeof(flow->matches[0]));
+
+	/* update masks and start new flows for matches */
+	n = update_flow_mask(flow, fmsk, rmsk);
+	_F_(start_flow)(flow, n, rmsk[0], pdata, idx, di);
+
+	return n;
+}
+
+/*
+ * Test for matches ut to (2 * _N_) flows at once,
+ * if matches exist - process them and start new flows.
+ */
+static inline void
+_F_(match_check_process)(struct acl_flow_avx512 *flow, uint32_t fm[2],
+	_T_simd pdata[4], _T_simd di[2], _T_simd idx[2], _T_simd inp[2],
+	_T_simd tr_lo[2], _T_simd tr_hi[2])
+{
+	uint32_t n[2];
+	uint32_t rm[2];
+
+	/* check for matches */
+	rm[0] = _M_I_(test_epi32_mask)(tr_lo[0], _SV_(match_mask));
+	rm[1] = _M_I_(test_epi32_mask)(tr_lo[1], _SV_(match_mask));
+
+	/* till unprocessed matches exist */
+	while ((rm[0] | rm[1]) != 0) {
+
+		/* process matches and start new flows */
+		n[0] = _F_(match_process)(flow, &fm[0], &rm[0], &pdata[0],
+			&di[0], &idx[0], &tr_lo[0], &tr_hi[0]);
+		n[1] = _F_(match_process)(flow, &fm[1], &rm[1], &pdata[2],
+			&di[1], &idx[1], &tr_lo[1], &tr_hi[1]);
+
+		/* execute first transition for new flows, if any */
+
+		if (n[0] != 0) {
+			inp[0] = _F_(get_next_bytes)(flow, &pdata[0],
+					rm[0], &di[0], flow->first_load_sz);
+			_F_(first_trans)(flow, inp[0], rm[0], &tr_lo[0],
+					&tr_hi[0]);
+			rm[0] = _M_I_(test_epi32_mask)(tr_lo[0],
+					_SV_(match_mask));
+		}
+
+		if (n[1] != 0) {
+			inp[1] = _F_(get_next_bytes)(flow, &pdata[2],
+					rm[1], &di[1], flow->first_load_sz);
+			_F_(first_trans)(flow, inp[1], rm[1], &tr_lo[1],
+					&tr_hi[1]);
+			rm[1] = _M_I_(test_epi32_mask)(tr_lo[1],
+					_SV_(match_mask));
+		}
+	}
+}
+
+/*
+ * Perform search for up to (2 * _N_) flows in parallel.
+ * Use two sets of metadata, each serves _N_ flows max.
+ */
+static inline void
+_F_(search_trie)(struct acl_flow_avx512 *flow)
+{
+	uint32_t fm[2];
+	_T_simd di[2], idx[2], in[2], pdata[4], tr_lo[2], tr_hi[2];
+
+	/* first 1B load */
+	_F_(start_flow)(flow, _SIMD_MASK_BIT_, _SIMD_MASK_MAX_,
+			&pdata[0], &idx[0], &di[0]);
+	_F_(start_flow)(flow, _SIMD_MASK_BIT_, _SIMD_MASK_MAX_,
+			&pdata[2], &idx[1], &di[1]);
+
+	in[0] = _F_(get_next_bytes)(flow, &pdata[0], _SIMD_MASK_MAX_, &di[0],
+			flow->first_load_sz);
+	in[1] = _F_(get_next_bytes)(flow, &pdata[2], _SIMD_MASK_MAX_, &di[1],
+			flow->first_load_sz);
+
+	_F_(first_trans)(flow, in[0], _SIMD_MASK_MAX_, &tr_lo[0], &tr_hi[0]);
+	_F_(first_trans)(flow, in[1], _SIMD_MASK_MAX_, &tr_lo[1], &tr_hi[1]);
+
+	fm[0] = _SIMD_MASK_MAX_;
+	fm[1] = _SIMD_MASK_MAX_;
+
+	/* match check */
+	_F_(match_check_process)(flow, fm, pdata, di, idx, in, tr_lo, tr_hi);
+
+	while ((fm[0] | fm[1]) != 0) {
+
+		/* load next 4B */
+
+		in[0] = _F_(get_next_bytes)(flow, &pdata[0], fm[0],
+				&di[0], sizeof(uint32_t));
+		in[1] = _F_(get_next_bytes)(flow, &pdata[2], fm[1],
+				&di[1], sizeof(uint32_t));
+
+		/* main 4B loop */
+
+		in[0] = _F_(trans)(in[0], flow->trans, &tr_lo[0], &tr_hi[0]);
+		in[1] = _F_(trans)(in[1], flow->trans, &tr_lo[1], &tr_hi[1]);
+
+		in[0] = _F_(trans)(in[0], flow->trans, &tr_lo[0], &tr_hi[0]);
+		in[1] = _F_(trans)(in[1], flow->trans, &tr_lo[1], &tr_hi[1]);
+
+		in[0] = _F_(trans)(in[0], flow->trans, &tr_lo[0], &tr_hi[0]);
+		in[1] = _F_(trans)(in[1], flow->trans, &tr_lo[1], &tr_hi[1]);
+
+		in[0] = _F_(trans)(in[0], flow->trans, &tr_lo[0], &tr_hi[0]);
+		in[1] = _F_(trans)(in[1], flow->trans, &tr_lo[1], &tr_hi[1]);
+
+		/* check for matches */
+		_F_(match_check_process)(flow, fm, pdata, di, idx, in,
+			tr_lo, tr_hi);
+	}
+}
+
+/*
+ * resolve match index to actual result/priority offset.
+ */
+static inline _T_simd
+_F_(resolve_match_idx)(_T_simd mi)
+{
+	RTE_BUILD_BUG_ON(sizeof(struct rte_acl_match_results) !=
+		1 << (match_log + 2));
+	return _M_I_(slli_epi32)(mi, match_log);
+}
+
+/*
+ * Resolve multiple matches for the same flow based on priority.
+ */
+static inline _T_simd
+_F_(resolve_pri)(const int32_t res[], const int32_t pri[],
+	const uint32_t match[], _T_mask msk, uint32_t nb_trie,
+	uint32_t nb_skip)
+{
+	uint32_t i;
+	const uint32_t *pm;
+	_T_mask m;
+	_T_simd cp, cr, np, nr, mch;
+
+	const _T_simd zero = _M_I_(set1_epi32)(0);
+
+	/* get match indexes */
+	mch = _M_I_(maskz_loadu_epi32)(msk, match);
+	mch = _F_(resolve_match_idx)(mch);
+
+	/* read result and priority values for first trie */
+	cr = _M_MGI_(mask_i32gather_epi32)(zero, msk, mch, res, sizeof(res[0]));
+	cp = _M_MGI_(mask_i32gather_epi32)(zero, msk, mch, pri, sizeof(pri[0]));
+
+	/*
+	 * read result and priority values for next tries and select one
+	 * with highest priority.
+	 */
+	for (i = 1, pm = match + nb_skip; i != nb_trie;
+			i++, pm += nb_skip) {
+
+		mch = _M_I_(maskz_loadu_epi32)(msk, pm);
+		mch = _F_(resolve_match_idx)(mch);
+
+		nr = _M_MGI_(mask_i32gather_epi32)(zero, msk, mch, res,
+				sizeof(res[0]));
+		np = _M_MGI_(mask_i32gather_epi32)(zero, msk, mch, pri,
+				sizeof(pri[0]));
+
+		m = _M_I_(cmpgt_epi32_mask)(cp, np);
+		cr = _M_I_(mask_mov_epi32)(nr, m, cr);
+		cp = _M_I_(mask_mov_epi32)(np, m, cp);
+	}
+
+	return cr;
+}
+
+/*
+ * Resolve num (<= _N_) matches for single category
+ */
+static inline void
+_F_(resolve_sc)(uint32_t result[], const int32_t res[],
+	const int32_t pri[], const uint32_t match[], uint32_t nb_pkt,
+	uint32_t nb_trie, uint32_t nb_skip)
+{
+	_T_mask msk;
+	_T_simd cr;
+
+	msk = (1 << nb_pkt) - 1;
+	cr = _F_(resolve_pri)(res, pri, match, msk, nb_trie, nb_skip);
+	_M_I_(mask_storeu_epi32)(result, msk, cr);
+}
+
+/*
+ * Resolve matches for single category
+ */
+static inline void
+_F_(resolve_single_cat)(uint32_t result[],
+	const struct rte_acl_match_results pr[], const uint32_t match[],
+	uint32_t nb_pkt, uint32_t nb_trie)
+{
+	uint32_t j, k, n;
+	const int32_t *res, *pri;
+	_T_simd cr[2];
+
+	res = (const int32_t *)pr->results;
+	pri = pr->priority;
+
+	for (k = 0; k != (nb_pkt & ~_SIMD_FLOW_MSK_); k += _SIMD_FLOW_NUM_) {
+
+		j = k + _SIMD_MASK_BIT_;
+
+		cr[0] = _F_(resolve_pri)(res, pri, match + k, _SIMD_MASK_MAX_,
+				nb_trie, nb_pkt);
+		cr[1] = _F_(resolve_pri)(res, pri, match + j, _SIMD_MASK_MAX_,
+				nb_trie, nb_pkt);
+
+		_M_SI_(storeu)((void *)(result + k), cr[0]);
+		_M_SI_(storeu)((void *)(result + j), cr[1]);
+	}
+
+	n = nb_pkt - k;
+	if (n != 0) {
+		if (n > _SIMD_MASK_BIT_) {
+			_F_(resolve_sc)(result + k, res, pri, match + k,
+				_SIMD_MASK_BIT_, nb_trie, nb_pkt);
+			k += _SIMD_MASK_BIT_;
+			n -= _SIMD_MASK_BIT_;
+		}
+		_F_(resolve_sc)(result + k, res, pri, match + k, n,
+				nb_trie, nb_pkt);
+	}
+}
lib/librte_acl/acl_run_avx512x16.h +89 -480

690 lines not on this page · raw message

lib/librte_acl/acl_run_avx512x8.h +88 -477

676 lines not on this page · raw message

Signature · 1 line
2.17.1
#39 lore raw

PATCH v3 13/14 test/acl: add AVX512 classify support

In reply to Konstantin Ananyev

Add AVX512 classify to the test coverage.

---
 app/test/test_acl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
app/test/test_acl.c +4 -2
index 333b347579..5b32347954 100644
@@ -278,8 +278,8 @@ test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 
 	/* set given classify alg, skip test if alg is not supported */
 	ret = rte_acl_set_ctx_classify(acx, alg);
-	if (ret == -ENOTSUP)
-		return 0;
+	if (ret != 0)
+		return (ret == -ENOTSUP) ? 0 : ret;
 
 	/**
 	 * these will run quite a few times, it's necessary to test code paths
@@ -341,6 +341,8 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 		RTE_ACL_CLASSIFY_AVX2,
 		RTE_ACL_CLASSIFY_NEON,
 		RTE_ACL_CLASSIFY_ALTIVEC,
+		RTE_ACL_CLASSIFY_AVX512X16,
+		RTE_ACL_CLASSIFY_AVX512X32,
 	};
 
 	/* swap all bytes in the data to network order */
Signature · 1 line
2.17.1
#40 lore raw

PATCH v3 14/14 app/acl: add AVX512 classify support

In reply to Konstantin Ananyev

Add ability to use AVX512 classify method.

---
 app/test-acl/main.c | 8 ++++++++
 1 file changed, 8 insertions(+)
app/test-acl/main.c +8 -0
index d9b65517cb..2a3a35a054 100644
@@ -81,6 +81,14 @@ static const struct acl_alg acl_alg[] = {
 		.name = "altivec",
 		.alg = RTE_ACL_CLASSIFY_ALTIVEC,
 	},
+	{
+		.name = "avx512x16",
+		.alg = RTE_ACL_CLASSIFY_AVX512X16,
+	},
+	{
+		.name = "avx512x32",
+		.alg = RTE_ACL_CLASSIFY_AVX512X32,
+	},
 };
 
 static struct {
Signature · 1 line
2.17.1
#41 lore raw

Re: [dpdk-dev] [PATCH v3 00/14] acl: introduce AVX512 classify methods

In reply to Konstantin Ananyev
Quoted 18 lines · Konstantin Ananyev

These patch series introduce support of AVX512 specific classify implementation for ACL library.
It adds two new algorithms:
- RTE_ACL_CLASSIFY_AVX512X16 - can process up to 16 flows in parallel. It uses 256-bit width instructions/registers only
(to avoid frequency level change).
On my SKX box test-acl shows ~15-30% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X16 classify algorithms.
- RTE_ACL_CLASSIFY_AVX512X32 - can process up to 32 flows in parallel. It uses 512-bit width instructions/registers and provides higher performance then AVX512X16, but can cause frequency level change. On my SKX box test-acl shows ~50-70% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X32 classify algorithms. ICX and CLX testing showed similar level of speedup.

Quoted 2 lines

Current AVX512 classify implementation is only supported on x86_64. Note that this series introduce a formal ABI incompatibility

The only API change I can see is in rte_acl_classify_alg() new error code but I don't think we need an announcement for this. As for ABI, we are breaking it in this release, so I see no pb.

Quoted 5 lines

with previous versions of ACL library.

v2 -> v3:
Fix checkpatch warnings
Split AVX512 algorithm into two and deduplicate common code

Patch 7 still references a RTE_MACHINE_CPUFLAG flag. Can you rework now that those flags have been dropped?

Thanks.

Signature · 1 line
David Marchand
#42 lore raw

Re: [dpdk-dev] [PATCH v3 00/14] acl: introduce AVX512 classify methods

Quoted 22 lines
Quoted 18 lines · Konstantin Ananyev

These patch series introduce support of AVX512 specific classify implementation for ACL library.
It adds two new algorithms:
- RTE_ACL_CLASSIFY_AVX512X16 - can process up to 16 flows in parallel. It uses 256-bit width instructions/registers only
(to avoid frequency level change).
On my SKX box test-acl shows ~15-30% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X16 classify algorithms.
- RTE_ACL_CLASSIFY_AVX512X32 - can process up to 32 flows in parallel. It uses 512-bit width instructions/registers and provides higher performance then AVX512X16, but can cause frequency level change. On my SKX box test-acl shows ~50-70% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X32 classify algorithms. ICX and CLX testing showed similar level of speedup.

Quoted 6 lines
Quoted 2 lines

Current AVX512 classify implementation is only supported on x86_64. Note that this series introduce a formal ABI incompatibility

The only API change I can see is in rte_acl_classify_alg() new error code but I don't think we need an announcement for this. As for ABI, we are breaking it in this release, so I see no pb.

Cool, I just wanted to underline that patch #3:
https://patches.dpdk.org/patch/79786/
is a formal ABI breakage.

Quoted 11 lines
Quoted 7 lines

with previous versions of ACL library.

v2 -> v3:
Fix checkpatch warnings
Split AVX512 algorithm into two and deduplicate common code

Patch 7 still references a RTE_MACHINE_CPUFLAG flag. Can you rework now that those flags have been dropped?

Should be fixed in v4:
https://patches.dpdk.org/project/dpdk/list/?series=12721

One more thing to mention - this series has a dependency on Vladimir's patch:
https://patches.dpdk.org/patch/79310/ ("eal/x86: introduce AVX 512-bit type"), so CI/travis would still report an error.

Thanks
Konstantin

#43 lore raw

Re: [dpdk-dev] [PATCH v3 00/14] acl: introduce AVX512 classify methods

Quoted 10 lines · Konstantin
Quoted 7 lines
Quoted 3 lines

v2 -> v3:
Fix checkpatch warnings
Split AVX512 algorithm into two and deduplicate common code

Patch 7 still references a RTE_MACHINE_CPUFLAG flag. Can you rework now that those flags have been dropped?

Should be fixed in v4:
https://patches.dpdk.org/project/dpdk/list/?series=12721

Thanks.

Quoted 4 lines

One more thing to mention - this series has a dependency on Vladimir's patch:
https://patches.dpdk.org/patch/79310/ ("eal/x86: introduce AVX 512-bit type"), so CI/travis would still report an error.

Yes, I am looking at this patch and I think I will take it alone so that we remove the dependency between those series.

Signature · 1 line
David Marchand
#44 lore raw

Re: [dpdk-dev] [PATCH v3 00/14] acl: introduce AVX512 classify methods

In reply to Ananyev, Konstantin
Quoted 25 lines · Konstantin
Quoted 25 lines
Quoted 20 lines · Konstantin Ananyev

These patch series introduce support of AVX512 specific classify implementation for ACL library.
It adds two new algorithms:
- RTE_ACL_CLASSIFY_AVX512X16 - can process up to 16 flows in parallel. It uses 256-bit width instructions/registers only
(to avoid frequency level change).
On my SKX box test-acl shows ~15-30% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X16 classify algorithms.
- RTE_ACL_CLASSIFY_AVX512X32 - can process up to 32 flows in parallel. It uses 512-bit width instructions/registers and provides higher performance then AVX512X16, but can cause frequency level change. On my SKX box test-acl shows ~50-70% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X32 classify algorithms. ICX and CLX testing showed similar level of speedup.

Current AVX512 classify implementation is only supported on x86_64. Note that this series introduce a formal ABI incompatibility

Quoted 7 lines
Quoted 3 lines

The only API change I can see is in rte_acl_classify_alg() new error code but I don't think we need an announcement for this. As for ABI, we are breaking it in this release, so I see no pb.

Cool, I just wanted to underline that patch #3:
https://patches.dpdk.org/patch/79786/
is a formal ABI breakage.

As David said, this is an ABI breaking release - so there is no requirement to maintain compatibility.

https://doc.dpdk.org/guides/contributing/abi_policy.html

However the following requirements remain:-

* The acknowledgment of the maintainer of the component is mandatory, or if no maintainer is available for the component, the tree/sub-tree maintainer for that component must acknowledge the ABI change instead.
* The acknowledgment of three members of the technical board, as delegates of the technical board acknowledging the need for the ABI change, is also mandatory.

I guess you are the maintainer in this case, so that requirement is satisfied.

Quoted 23 lines
Quoted 12 lines
Quoted 8 lines

with previous versions of ACL library.

v2 -> v3:
Fix checkpatch warnings
Split AVX512 algorithm into two and deduplicate common code

Patch 7 still references a RTE_MACHINE_CPUFLAG flag. Can you rework now that those flags have been dropped?

Should be fixed in v4:
https://patches.dpdk.org/project/dpdk/list/?series=12721

One more thing to mention - this series has a dependency on Vladimir's patch:
https://patches.dpdk.org/patch/79310/ ("eal/x86: introduce AVX 512-bit type"), so CI/travis would still report an error.

Thanks
Konstantin

#45 lore raw

v4 cover acl: introduce AVX512 classify methods

In reply to Konstantin Ananyev

These patch series introduce support of AVX512 specific classify implementation for ACL library.
It adds two new algorithms:
- RTE_ACL_CLASSIFY_AVX512X16 - can process up to 16 flows in parallel. It uses 256-bit width instructions/registers only
(to avoid frequency level change).
On my SKX box test-acl shows ~15-30% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X16 classify algorithms.
- RTE_ACL_CLASSIFY_AVX512X32 - can process up to 32 flows in parallel. It uses 512-bit width instructions/registers and provides higher performance then AVX512X16, but can cause frequency level change. On my SKX box test-acl shows ~50-70% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X32 classify algorithms. ICX and CLX testing showed similar level of speedup.

Current AVX512 classify implementation is only supported on x86_64. Note that this series introduce a formal ABI incompatibility with previous versions of ACL library.

Depends-on: patch-79310 ("eal/x86: introduce AVX 512-bit type")

v3 -> v4
Fix problems with meson 0.47
Updates to conform latest changes in the mainline (removal of RTE_MACHINE_CPUFLAG_*)
Fix checkpatch warnings

v2 -> v3:
Fix checkpatch warnings
Split AVX512 algorithm into two and deduplicate common code
v1 -> v2:
Deduplicated 8/16 code paths as much as possible Updated default algorithm selection
Removed library constructor to make it easier integrate with
https://patches.dpdk.org/project/dpdk/list/?series=11831
Updated docs

Konstantin Ananyev (14):
acl: fix x86 build when compiler doesn't support AVX2
doc: fix missing classify methods in ACL guide
acl: remove of unused enum value
acl: remove library constructor
app/acl: few small improvements
test/acl: expand classify test coverage
acl: add infrastructure to support AVX512 classify
acl: introduce 256-bit width AVX512 classify implementation
acl: update default classify algorithm selection
acl: introduce 512-bit width AVX512 classify implementation
acl: for AVX512 classify use 4B load whenever possible
acl: deduplicate AVX512 code paths
test/acl: add AVX512 classify support
app/acl: add AVX512 classify support

 app/test-acl/main.c                           |  23 +-
 app/test/test_acl.c                           | 105 ++--
 config/x86/meson.build                        |   3 +-
 .../prog_guide/packet_classif_access_ctrl.rst |  20 +
 doc/guides/rel_notes/deprecation.rst          |   4 -
 doc/guides/rel_notes/release_20_11.rst        |  12 +
 lib/librte_acl/acl.h                          |  16 +
 lib/librte_acl/acl_bld.c                      |  34 ++
 lib/librte_acl/acl_gen.c                      |   2 +-
 lib/librte_acl/acl_run_avx512.c               | 164 ++++++
 lib/librte_acl/acl_run_avx512_common.h        | 477 ++++++++++++++++++
 lib/librte_acl/acl_run_avx512x16.h            | 341 +++++++++++++
 lib/librte_acl/acl_run_avx512x8.h             | 253 ++++++++++
 lib/librte_acl/meson.build                    |  48 ++
 lib/librte_acl/rte_acl.c                      | 212 ++++++--
 lib/librte_acl/rte_acl.h                      |   4 +-
 16 files changed, 1618 insertions(+), 100 deletions(-)
 create mode 100644 lib/librte_acl/acl_run_avx512.c
 create mode 100644 lib/librte_acl/acl_run_avx512_common.h
 create mode 100644 lib/librte_acl/acl_run_avx512x16.h
 create mode 100644 lib/librte_acl/acl_run_avx512x8.h
Signature · 1 line
2.17.1
#46 lore raw

PATCH v4 1/14 acl: fix x86 build when compiler doesn't support AVX2

Right now we define dummy version of rte_acl_classify_avx2() when both X86 and AVX2 are not detected, though it should be for non-AVX2 case only.

Fixes e53ce4e41379 ("acl: remove use of weak functions")
---
 lib/librte_acl/rte_acl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/librte_acl/rte_acl.c +1 -1
index 777ec4d340..715b023592 100644
@@ -16,7 +16,6 @@ static struct rte_tailq_elem rte_acl_tailq = {
 };
 EAL_REGISTER_TAILQ(rte_acl_tailq)
 
-#ifndef RTE_ARCH_X86
 #ifndef CC_AVX2_SUPPORT
 /*
  * If the compiler doesn't support AVX2 instructions,
@@ -33,6 +32,7 @@ rte_acl_classify_avx2(__rte_unused const struct rte_acl_ctx *ctx,
 }
 #endif
 
+#ifndef RTE_ARCH_X86
 int
 rte_acl_classify_sse(__rte_unused const struct rte_acl_ctx *ctx,
 	__rte_unused const uint8_t **data,
Signature · 1 line
2.17.1
Reviewed-by on v4 1/14
#47 lore raw

Re: [dpdk-dev] [dpdk-stable] [PATCH v4 01/14] acl: fix x86 build when compiler doesn't support AVX2

Quoted 34 lines · Konstantin Ananyev

Right now we define dummy version of rte_acl_classify_avx2() when both X86 and AVX2 are not detected, though it should be for non-AVX2 case only.

Fixes e53ce4e41379 ("acl: remove use of weak functions")
---
 lib/librte_acl/rte_acl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/librte_acl/rte_acl.c +1 -2
index 777ec4d340..715b023592 100644
@@ -16,7 +16,6 @@ static struct rte_tailq_elem rte_acl_tailq = {
 };
 EAL_REGISTER_TAILQ(rte_acl_tailq)
 
-#ifndef RTE_ARCH_X86
 #ifndef CC_AVX2_SUPPORT
 /*
  * If the compiler doesn't support AVX2 instructions,
@@ -33,6 +32,7 @@ rte_acl_classify_avx2(__rte_unused const struct rte_acl_ctx *ctx,
 }
 #endif
 
+#ifndef RTE_ARCH_X86
 int
 rte_acl_classify_sse(__rte_unused const struct rte_acl_ctx *ctx,
        __rte_unused const uint8_t **data,
--
Quoted 2 lines

2.17.1

Signature · 1 line
David Marchand
#48 lore raw

PATCH v4 2/14 doc: fix missing classify methods in ACL guide

In reply to Konstantin Ananyev

Add brief description for missing ACL classify algorithms:
RTE_ACL_CLASSIFY_NEON and RTE_ACL_CLASSIFY_ALTIVEC.

Fixes 34fa6c27c156 ("acl: add NEON optimization for ARMv8")
Fixes 1d73135f9f1c ("acl: add AltiVec for ppc64")
---
 doc/guides/prog_guide/packet_classif_access_ctrl.rst | 6 ++++++
 1 file changed, 6 insertions(+)
doc/guides/prog_guide/packet_classif_access_ctrl.rst +6 -0
index 0345512b9e..daf03e6d7a 100644
@@ -373,6 +373,12 @@ There are several implementations of classify algorithm:
 
 *   **RTE_ACL_CLASSIFY_AVX2**: vector implementation, can process up to 16 flows in parallel. Requires AVX2 support.
 
+*   **RTE_ACL_CLASSIFY_NEON**: vector implementation, can process up to 8 flows
+    in parallel. Requires NEON support.
+
+*   **RTE_ACL_CLASSIFY_ALTIVEC**: vector implementation, can process up to 8
+    flows in parallel. Requires ALTIVEC support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
Signature · 1 line
2.17.1
Reviewed-by on v4 2/14
#49 lore raw

Re: [dpdk-dev] [PATCH v4 02/14] doc: fix missing classify methods in ACL guide

Quoted 31 lines · Konstantin Ananyev

Add brief description for missing ACL classify algorithms:
RTE_ACL_CLASSIFY_NEON and RTE_ACL_CLASSIFY_ALTIVEC.

Fixes 34fa6c27c156 ("acl: add NEON optimization for ARMv8")
Fixes 1d73135f9f1c ("acl: add AltiVec for ppc64")
---
 doc/guides/prog_guide/packet_classif_access_ctrl.rst | 6 ++++++
 1 file changed, 6 insertions(+)
doc/guides/prog_guide/packet_classif_access_ctrl.rst +6 -1
index 0345512b9e..daf03e6d7a 100644
@@ -373,6 +373,12 @@ There are several implementations of classify algorithm:
 
 *   **RTE_ACL_CLASSIFY_AVX2**: vector implementation, can process up to 16 flows in parallel. Requires AVX2 support.
 
+*   **RTE_ACL_CLASSIFY_NEON**: vector implementation, can process up to 8 flows
+    in parallel. Requires NEON support.
+
+*   **RTE_ACL_CLASSIFY_ALTIVEC**: vector implementation, can process up to 8
+    flows in parallel. Requires ALTIVEC support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
--
Quoted 2 lines

2.17.1

Signature · 1 line
David Marchand
#50 lore raw

PATCH v4 3/14 acl: remove of unused enum value

In reply to Konstantin Ananyev

Removal of unused enum value (RTE_ACL_CLASSIFY_NUM). This enum value is not used inside DPDK, while it prevents to add new classify algorithms without causing an ABI breakage.

Note that this change introduce a formal ABI incompatibility with previous versions of ACL library.

---
 doc/guides/rel_notes/deprecation.rst   | 4 ----
 doc/guides/rel_notes/release_20_11.rst | 4 ++++
 lib/librte_acl/rte_acl.h               | 1 -
 3 files changed, 4 insertions(+), 5 deletions(-)
doc/guides/rel_notes/deprecation.rst +0 -4
index 8080a28896..938e967c8f 100644
@@ -209,10 +209,6 @@ Deprecation Notices
   - https://patches.dpdk.org/patch/71457/
   - https://patches.dpdk.org/patch/71456/
 
-* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value will be removed.
-  This enum value is not used inside DPDK, while it prevents to add new
-  classify algorithms without causing an ABI breakage.
-
 * sched: To allow more traffic classes, flexible mapping of pipe queues to
   traffic classes, and subport level configuration of pipes and queues
   changes will be made to macros, data structures and API functions defined
doc/guides/rel_notes/release_20_11.rst +4 -0
index 6d8c24413d..e0de60c0c2 100644
@@ -210,6 +210,10 @@ API Changes
 
 * bpf: ``RTE_BPF_XTYPE_NUM`` has been dropped from ``rte_bpf_xtype``.
 
+* acl: ``RTE_ACL_CLASSIFY_NUM`` enum value has been removed.
+  This enum value was not used inside DPDK, while it prevented to add new
+  classify algorithms without causing an ABI breakage.
+
 
 ABI Changes
 -----------
lib/librte_acl/rte_acl.h +0 -1
index aa22e70c6e..b814423a63 100644
@@ -241,7 +241,6 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
-	RTE_ACL_CLASSIFY_NUM          /* should always be the last one. */
 };
 
 /**
Signature · 1 line
2.17.1
#51 lore raw

PATCH v4 4/14 acl: remove library constructor

In reply to Konstantin Ananyev

Right now ACL library determines best possible (default) classify method on a given platform with specilal constructor function rte_acl_init(). This patch makes the following changes:
- Move selection of default classify method into a separate private function and call it for each ACL context creation (rte_acl_create()).
- Remove library constructor function
- Make rte_acl_set_ctx_classify() to check that requested algorithm is supported on given platform.

The purpose of these changes to improve and simplify algorithm selection process and prepare ACL library to be integrated with:
add max SIMD bitwidth to EAL
(https://patches.dpdk.org/project/dpdk/list/?series=11831)
patch-set

---
 lib/librte_acl/rte_acl.c | 166 ++++++++++++++++++++++++++++++---------
 lib/librte_acl/rte_acl.h |   1 +
 2 files changed, 132 insertions(+), 35 deletions(-)
lib/librte_acl/rte_acl.c +131 -35
index 715b023592..863549a38b 100644
@@ -79,57 +79,153 @@ static const rte_acl_classify_t classify_fns[] = {
 	[RTE_ACL_CLASSIFY_ALTIVEC] = rte_acl_classify_altivec,
 };
 
-/* by default, use always available scalar code path. */
-static enum rte_acl_classify_alg rte_acl_default_classify =
-	RTE_ACL_CLASSIFY_SCALAR;
+/*
+ * Helper function for acl_check_alg.
+ * Check support for ARM specific classify methods.
+ */
+static int
+acl_check_alg_arm(enum rte_acl_classify_alg alg)
+{
+	if (alg == RTE_ACL_CLASSIFY_NEON) {
+#if defined(RTE_ARCH_ARM64)
+		return 0;
+#elif defined(RTE_ARCH_ARM)
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON))
+			return 0;
+		return -ENOTSUP;
+#else
+		return -ENOTSUP;
+#endif
+	}
+
+	return -EINVAL;
+}
 
-static void
-rte_acl_set_default_classify(enum rte_acl_classify_alg alg)
+/*
+ * Helper function for acl_check_alg.
+ * Check support for PPC specific classify methods.
+ */
+static int
+acl_check_alg_ppc(enum rte_acl_classify_alg alg)
 {
-	rte_acl_default_classify = alg;
+	if (alg == RTE_ACL_CLASSIFY_ALTIVEC) {
+#if defined(RTE_ARCH_PPC_64)
+		return 0;
+#else
+		return -ENOTSUP;
+#endif
+	}
+
+	return -EINVAL;
 }
 
-extern int
-rte_acl_set_ctx_classify(struct rte_acl_ctx *ctx, enum rte_acl_classify_alg alg)
+/*
+ * Helper function for acl_check_alg.
+ * Check support for x86 specific classify methods.
+ */
+static int
+acl_check_alg_x86(enum rte_acl_classify_alg alg)
 {
-	if (ctx == NULL || (uint32_t)alg >= RTE_DIM(classify_fns))
-		return -EINVAL;
+	if (alg == RTE_ACL_CLASSIFY_AVX2) {
+#ifdef CC_AVX2_SUPPORT
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
+			return 0;
+#endif
+		return -ENOTSUP;
+	}
 
-	ctx->alg = alg;
-	return 0;
+	if (alg == RTE_ACL_CLASSIFY_SSE) {
+#ifdef RTE_ARCH_X86
+		if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
+			return 0;
+#endif
+		return -ENOTSUP;
+	}
+
+	return -EINVAL;
 }
 
 /*
- * Select highest available classify method as default one.
- * Note that CLASSIFY_AVX2 should be set as a default only
- * if both conditions are met:
- * at build time compiler supports AVX2 and target cpu supports AVX2.
+ * Check if input alg is supported by given platform/binary.
+ * Note that both conditions should be met:
+ * - at build time compiler supports ISA used by given methods
+ * - at run time target cpu supports necessary ISA.
  */
-RTE_INIT(rte_acl_init)
+static int
+acl_check_alg(enum rte_acl_classify_alg alg)
 {
-	enum rte_acl_classify_alg alg = RTE_ACL_CLASSIFY_DEFAULT;
+	switch (alg) {
+	case RTE_ACL_CLASSIFY_NEON:
+		return acl_check_alg_arm(alg);
+	case RTE_ACL_CLASSIFY_ALTIVEC:
+		return acl_check_alg_ppc(alg);
+	case RTE_ACL_CLASSIFY_AVX2:
+	case RTE_ACL_CLASSIFY_SSE:
+		return acl_check_alg_x86(alg);
+	/* scalar method is supported on all platforms */
+	case RTE_ACL_CLASSIFY_SCALAR:
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
 
-#if defined(RTE_ARCH_ARM64)
-	alg =  RTE_ACL_CLASSIFY_NEON;
-#elif defined(RTE_ARCH_ARM)
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_NEON))
-		alg =  RTE_ACL_CLASSIFY_NEON;
+/*
+ * Get preferred alg for given platform.
+ */
+static enum rte_acl_classify_alg
+acl_get_best_alg(void)
+{
+	/*
+	 * array of supported methods for each platform.
+	 * Note that order is important - from most to less preferable.
+	 */
+	static const enum rte_acl_classify_alg alg[] = {
+#if defined(RTE_ARCH_ARM)
+		RTE_ACL_CLASSIFY_NEON,
 #elif defined(RTE_ARCH_PPC_64)
-	alg = RTE_ACL_CLASSIFY_ALTIVEC;
-#else
-#ifdef CC_AVX2_SUPPORT
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_AVX2))
-		alg = RTE_ACL_CLASSIFY_AVX2;
-	else if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
-#else
-	if (rte_cpu_get_flag_enabled(RTE_CPUFLAG_SSE4_1))
+		RTE_ACL_CLASSIFY_ALTIVEC,
+#elif defined(RTE_ARCH_X86)
+		RTE_ACL_CLASSIFY_AVX2,
+		RTE_ACL_CLASSIFY_SSE,
 #endif
-		alg = RTE_ACL_CLASSIFY_SSE;
+		RTE_ACL_CLASSIFY_SCALAR,
+	};
 
-#endif
-	rte_acl_set_default_classify(alg);
+	uint32_t i;
+
+	/* find best possible alg */
+	for (i = 0; i != RTE_DIM(alg) && acl_check_alg(alg[i]) != 0; i++)
+		;
+
+	/* we always have to find something suitable */
+	RTE_VERIFY(i != RTE_DIM(alg));
+	return alg[i];
+}
+
+extern int
+rte_acl_set_ctx_classify(struct rte_acl_ctx *ctx, enum rte_acl_classify_alg alg)
+{
+	int32_t rc;
+
+	/* formal parameters check */
+	if (ctx == NULL || (uint32_t)alg >= RTE_DIM(classify_fns))
+		return -EINVAL;
+
+	/* user asked us to select the *best* one */
+	if (alg == RTE_ACL_CLASSIFY_DEFAULT)
+		alg = acl_get_best_alg();
+
+	/* check that given alg is supported */
+	rc = acl_check_alg(alg);
+	if (rc != 0)
+		return rc;
+
+	ctx->alg = alg;
+	return 0;
 }
 
+
 int
 rte_acl_classify_alg(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories,
@@ -262,7 +358,7 @@ rte_acl_create(const struct rte_acl_param *param)
 		ctx->max_rules = param->max_rule_num;
 		ctx->rule_sz = param->rule_size;
 		ctx->socket_id = param->socket_id;
-		ctx->alg = rte_acl_default_classify;
+		ctx->alg = acl_get_best_alg();
 		strlcpy(ctx->name, param->name, sizeof(ctx->name));
 
 		te->data = (void *) ctx;
lib/librte_acl/rte_acl.h +1 -0
index b814423a63..3999f15ded 100644
@@ -329,6 +329,7 @@ rte_acl_classify_alg(const struct rte_acl_ctx *ctx,
  *   existing algorithm, and that it could be run on the given CPU.
  * @return
  *   - -EINVAL if the parameters are invalid.
+ *   - -ENOTSUP requested algorithm is not supported by given platform.
  *   - Zero if operation completed successfully.
  */
 extern int
Signature · 1 line
2.17.1
#52 lore raw

PATCH v4 5/14 app/acl: few small improvements

In reply to Konstantin Ananyev

- enhance output to print extra stats
- use rte_rdtsc_precise() for cycle measurements

---
 app/test-acl/main.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)
app/test-acl/main.c +10 -5
index 0a5dfb621d..d9b65517cb 100644
@@ -862,9 +862,10 @@ search_ip5tuples(__rte_unused void *arg)
 {
 	uint64_t pkt, start, tm;
 	uint32_t i, lcore;
+	long double st;
 
 	lcore = rte_lcore_id();
-	start = rte_rdtsc();
+	start = rte_rdtsc_precise();
 	pkt = 0;
 
 	for (i = 0; i != config.iter_num; i++) {
@@ -872,12 +873,16 @@ search_ip5tuples(__rte_unused void *arg)
 			config.trace_step, config.alg.name);
 	}
 
-	tm = rte_rdtsc() - start;
+	tm = rte_rdtsc_precise() - start;
+
+	st = (long double)tm / rte_get_timer_hz();
 	dump_verbose(DUMP_NONE, stdout,
 		"%s  @lcore %u: %" PRIu32 " iterations, %" PRIu64 " pkts, %"
-		PRIu32 " categories, %" PRIu64 " cycles, %#Lf cycles/pkt\n",
-		__func__, lcore, i, pkt, config.run_categories,
-		tm, (pkt == 0) ? 0 : (long double)tm / pkt);
+		PRIu32 " categories, %" PRIu64 " cycles (%.2Lf sec), "
+		"%.2Lf cycles/pkt, %.2Lf pkt/sec\n",
+		__func__, lcore, i, pkt,
+		config.run_categories, tm, st,
+		(pkt == 0) ? 0 : (long double)tm / pkt, pkt / st);
 
 	return 0;
 }
Signature · 1 line
2.17.1
#53 lore raw

PATCH v4 6/14 test/acl: expand classify test coverage

In reply to Konstantin Ananyev

Make classify test to run for all supported methods.

---
 app/test/test_acl.c | 103 ++++++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 52 deletions(-)
app/test/test_acl.c +51 -52
index 316bf4d065..333b347579 100644
@@ -266,22 +266,20 @@ rte_acl_ipv4vlan_build(struct rte_acl_ctx *ctx,
 }
 
 /*
- * Test scalar and SSE ACL lookup.
+ * Test ACL lookup (selected alg).
  */
 static int
-test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
-	size_t dim)
+test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
+	const uint8_t *data[], size_t dim, enum rte_acl_classify_alg alg)
 {
-	int ret, i;
-	uint32_t result, count;
+	int32_t ret;
+	uint32_t i, result, count;
 	uint32_t results[dim * RTE_ACL_MAX_CATEGORIES];
-	const uint8_t *data[dim];
-	/* swap all bytes in the data to network order */
-	bswap_test_data(test_data, dim, 1);
 
-	/* store pointers to test data */
-	for (i = 0; i < (int) dim; i++)
-		data[i] = (uint8_t *)&test_data[i];
+	/* set given classify alg, skip test if alg is not supported */
+	ret = rte_acl_set_ctx_classify(acx, alg);
+	if (ret == -ENOTSUP)
+		return 0;
 
 	/**
 	 * these will run quite a few times, it's necessary to test code paths
@@ -291,12 +289,13 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 		ret = rte_acl_classify(acx, data, results,
 				count, RTE_ACL_MAX_CATEGORIES);
 		if (ret != 0) {
-			printf("Line %i: SSE classify failed!\n", __LINE__);
-			goto err;
+			printf("Line %i: classify(alg=%d) failed!\n",
+				__LINE__, alg);
+			return ret;
 		}
 
 		/* check if we allow everything we should allow */
-		for (i = 0; i < (int) count; i++) {
+		for (i = 0; i < count; i++) {
 			result =
 				results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW];
 			if (result != test_data[i].allow) {
@@ -304,63 +303,63 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 					"(expected %"PRIu32" got %"PRIu32")!\n",
 					__LINE__, i, test_data[i].allow,
 					result);
-				ret = -EINVAL;
-				goto err;
+				return -EINVAL;
 			}
 		}
 
 		/* check if we deny everything we should deny */
-		for (i = 0; i < (int) count; i++) {
+		for (i = 0; i < count; i++) {
 			result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY];
 			if (result != test_data[i].deny) {
 				printf("Line %i: Error in deny results at %i "
 					"(expected %"PRIu32" got %"PRIu32")!\n",
 					__LINE__, i, test_data[i].deny,
 					result);
-				ret = -EINVAL;
-				goto err;
+				return -EINVAL;
 			}
 		}
 	}
 
-	/* make a quick check for scalar */
-	ret = rte_acl_classify_alg(acx, data, results,
-			dim, RTE_ACL_MAX_CATEGORIES,
-			RTE_ACL_CLASSIFY_SCALAR);
-	if (ret != 0) {
-		printf("Line %i: scalar classify failed!\n", __LINE__);
-		goto err;
-	}
+	/* restore default classify alg */
+	return rte_acl_set_ctx_classify(acx, RTE_ACL_CLASSIFY_DEFAULT);
+}
 
-	/* check if we allow everything we should allow */
-	for (i = 0; i < (int) dim; i++) {
-		result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_ALLOW];
-		if (result != test_data[i].allow) {
-			printf("Line %i: Error in allow results at %i "
-					"(expected %"PRIu32" got %"PRIu32")!\n",
-					__LINE__, i, test_data[i].allow,
-					result);
-			ret = -EINVAL;
-			goto err;
-		}
-	}
+/*
+ * Test ACL lookup (all possible methods).
+ */
+static int
+test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
+	size_t dim)
+{
+	int32_t ret;
+	uint32_t i;
+	const uint8_t *data[dim];
 
-	/* check if we deny everything we should deny */
-	for (i = 0; i < (int) dim; i++) {
-		result = results[i * RTE_ACL_MAX_CATEGORIES + ACL_DENY];
-		if (result != test_data[i].deny) {
-			printf("Line %i: Error in deny results at %i "
-					"(expected %"PRIu32" got %"PRIu32")!\n",
-					__LINE__, i, test_data[i].deny,
-					result);
-			ret = -EINVAL;
-			goto err;
-		}
-	}
+	static const enum rte_acl_classify_alg alg[] = {
+		RTE_ACL_CLASSIFY_SCALAR,
+		RTE_ACL_CLASSIFY_SSE,
+		RTE_ACL_CLASSIFY_AVX2,
+		RTE_ACL_CLASSIFY_NEON,
+		RTE_ACL_CLASSIFY_ALTIVEC,
+	};
+
+	/* swap all bytes in the data to network order */
+	bswap_test_data(test_data, dim, 1);
+
+	/* store pointers to test data */
+	for (i = 0; i < dim; i++)
+		data[i] = (uint8_t *)&test_data[i];
 
 	ret = 0;
+	for (i = 0; i != RTE_DIM(alg); i++) {
+		ret = test_classify_alg(acx, test_data, data, dim, alg[i]);
+		if (ret < 0) {
+			printf("Line %i: %s() for alg=%d failed, errno=%d\n",
+				__LINE__, __func__, alg[i], -ret);
+			break;
+		}
+	}
 
-err:
 	/* swap data back to cpu order so that next time tests don't fail */
 	bswap_test_data(test_data, dim, 0);
 	return ret;
Signature · 1 line
2.17.1
#54 lore raw

PATCH v4 7/14 acl: add infrastructure to support AVX512 classify

In reply to Konstantin Ananyev

Add necessary changes to support new AVX512 specific ACL classify algorithm:
- changes in meson.build to check that build tools (compiler, assembler, etc.) do properly support AVX512.
- run-time checks to make sure target platform does support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512 implementation couldn't be properly supported.

---
 config/x86/meson.build          |  3 ++-
 lib/librte_acl/acl.h            |  8 ++++++
 lib/librte_acl/acl_run_avx512.c | 29 ++++++++++++++++++++
 lib/librte_acl/meson.build      | 48 +++++++++++++++++++++++++++++++++
 lib/librte_acl/rte_acl.c        | 42 +++++++++++++++++++++++++++++
 lib/librte_acl/rte_acl.h        |  2 ++
 6 files changed, 131 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512.c
config/x86/meson.build +2 -1
index fea4d54035..724e69f4c4 100644
@@ -22,7 +22,8 @@ foreach f:base_flags
 endforeach
 
 optional_flags = ['AES', 'PCLMUL',
-		'AVX', 'AVX2', 'AVX512F',
+		'AVX', 'AVX2',
+		'AVX512F', 'AVX512VL', 'AVX512CD', 'AVX512BW',
 		'RDRND', 'RDSEED']
 foreach f:optional_flags
 	if cc.get_define('__@0@__'.format(f), args: machine_args) == '1'
lib/librte_acl/acl.h +8 -0
index 39d45a0c2b..543ce55659 100644
@@ -201,6 +201,14 @@ int
 rte_acl_classify_avx2(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories);
 
+int
+rte_acl_classify_avx512x16(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories);
+
+int
+rte_acl_classify_avx512x32(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories);
+
 int
 rte_acl_classify_neon(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories);
lib/librte_acl/acl_run_avx512.c new file +29 -0
new file mode 100644
index 0000000000..1817f88b29
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+#include "acl_run_sse.h"
+
+int
+rte_acl_classify_avx512x16(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories)
+{
+	if (num >= MAX_SEARCHES_SSE8)
+		return search_sse_8(ctx, data, results, num, categories);
+	if (num >= MAX_SEARCHES_SSE4)
+		return search_sse_4(ctx, data, results, num, categories);
+
+	return rte_acl_classify_scalar(ctx, data, results, num, categories);
+}
+
+int
+rte_acl_classify_avx512x32(const struct rte_acl_ctx *ctx, const uint8_t **data,
+	uint32_t *results, uint32_t num, uint32_t categories)
+{
+	if (num >= MAX_SEARCHES_SSE8)
+		return search_sse_8(ctx, data, results, num, categories);
+	if (num >= MAX_SEARCHES_SSE4)
+		return search_sse_4(ctx, data, results, num, categories);
+
+	return rte_acl_classify_scalar(ctx, data, results, num, categories);
+}
lib/librte_acl/meson.build +48 -0

54 lines not on this page · raw message

lib/librte_acl/rte_acl.c +42 -0

66 lines not on this page · raw message

lib/librte_acl/rte_acl.h +2 -0
index 3999f15ded..1bfed00743 100644
@@ -241,6 +241,8 @@ enum rte_acl_classify_alg {
 	RTE_ACL_CLASSIFY_AVX2 = 3,    /**< requires AVX2 support. */
 	RTE_ACL_CLASSIFY_NEON = 4,    /**< requires NEON support. */
 	RTE_ACL_CLASSIFY_ALTIVEC = 5,    /**< requires ALTIVEC support. */
+	RTE_ACL_CLASSIFY_AVX512X16 = 6,  /**< requires AVX512 support. */
+	RTE_ACL_CLASSIFY_AVX512X32 = 7,  /**< requires AVX512 support. */
 };
 
 /**
Signature · 1 line
2.17.1
#55 lore raw

Re: [dpdk-dev] [PATCH v4 07/14] acl: add infrastructure to support AVX512 classify

config/x86/meson.build foreach f:base_flags · line 27

Quoted 12 lines · Konstantin Ananyev
config/x86/meson.build +2 -1
index fea4d54035..724e69f4c4 100644
@@ -22,7 +22,8 @@ foreach f:base_flags
 endforeach
 
 optional_flags = ['AES', 'PCLMUL',
-               'AVX', 'AVX2', 'AVX512F',
+               'AVX', 'AVX2',
+               'AVX512F', 'AVX512VL', 'AVX512CD', 'AVX512BW',
                'RDRND', 'RDSEED']

Rebasing on current main and resolving the conflict with the net crc patches.

I am for sorting this alphabetically as the current order seems chaotic. The diff in this patch against origin/main would be:

-optional_flags = ['AES', 'PCLMUL',

-        'AVX', 'AVX2', 'AVX512F',
-        'RDRND', 'RDSEED',
-        'AVX512BW', 'AVX512DQ',
-        'AVX512VL', 'VPCLMULQDQ']
+optional_flags = [
+        'AES',
+        'AVX',
+        'AVX2',
+        'AVX512BW',
+        'AVX512CD',
+        'AVX512DQ',
+        'AVX512F',
+        'AVX512VL',
+        'PCLMUL',
+        'RDRND',
+        'RDSEED',
+        'VPCLMULQDQ',

+]

Objection?

config/x86/meson.build foreach f:base_flags · line 29

Quoted 2 lines
config/x86/meson.build +0 -0
 foreach f:optional_flags
        if cc.get_define('__@0@__'.format(f), args: machine_args) == '1'

Thanks.

Signature · 1 line
David Marchand
#56 lore raw

Re: [dpdk-dev] [PATCH v4 07/14] acl: add infrastructure to support AVX512 classify

Quoted 42 lines

config/x86/meson.build foreach f:base_flags · line 27

Quoted 12 lines · Konstantin Ananyev
config/x86/meson.build +2 -1
index fea4d54035..724e69f4c4 100644
@@ -22,7 +22,8 @@ foreach f:base_flags
 endforeach
 
 optional_flags = ['AES', 'PCLMUL',
-               'AVX', 'AVX2', 'AVX512F',
+               'AVX', 'AVX2',
+               'AVX512F', 'AVX512VL', 'AVX512CD', 'AVX512BW',
                'RDRND', 'RDSEED']

Rebasing on current main and resolving the conflict with the net crc patches.

I am for sorting this alphabetically as the current order seems chaotic. The diff in this patch against origin/main would be:

(quoted diff) +14 -5
-optional_flags = ['AES', 'PCLMUL',
-        'AVX', 'AVX2', 'AVX512F',
-        'RDRND', 'RDSEED',
-        'AVX512BW', 'AVX512DQ',
-        'AVX512VL', 'VPCLMULQDQ']
+optional_flags = [
+        'AES',
+        'AVX',
+        'AVX2',
+        'AVX512BW',
+        'AVX512CD',
+        'AVX512DQ',
+        'AVX512F',
+        'AVX512VL',
+        'PCLMUL',
+        'RDRND',
+        'RDSEED',
+        'VPCLMULQDQ',
+]
Quoted 1 line

Objection?

None 😊
Thanks
Konstantin

Quoted 10 lines

config/x86/meson.build foreach f:base_flags · line 29

Quoted 4 lines
config/x86/meson.build +0 -0
 foreach f:optional_flags
        if cc.get_define('__@0@__'.format(f), args: machine_args) == '1'

Thanks.

--
David Marchand

#57 lore raw

PATCH v4 8/14 acl: introduce 256-bit width AVX512 classify implementation

In reply to Konstantin Ananyev

Introduce classify implementation that uses AVX512 specific ISA. rte_acl_classify_avx512x16() is able to process up to 16 flows in parallel. It uses 256-bit width registers/instructions only
(to avoid frequency level change).
Note that for now only 64-bit version is supported.

---
 .../prog_guide/packet_classif_access_ctrl.rst |   4 +
 doc/guides/rel_notes/release_20_11.rst        |   5 +
 lib/librte_acl/acl.h                          |   7 +
 lib/librte_acl/acl_gen.c                      |   2 +-
 lib/librte_acl/acl_run_avx512.c               | 129 ++++
 lib/librte_acl/acl_run_avx512x8.h             | 642 ++++++++++++++++++
 6 files changed, 788 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512x8.h
doc/guides/prog_guide/packet_classif_access_ctrl.rst +4 -0
index daf03e6d7a..11f4bc841b 100644
@@ -379,6 +379,10 @@ There are several implementations of classify algorithm:
 *   **RTE_ACL_CLASSIFY_ALTIVEC**: vector implementation, can process up to 8
     flows in parallel. Requires ALTIVEC support.
 
+*   **RTE_ACL_CLASSIFY_AVX512X16**: vector implementation, can process up to 16
+    flows in parallel. Uses 256-bit width SIMD registers.
+    Requires AVX512 support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
doc/guides/rel_notes/release_20_11.rst +5 -0
index e0de60c0c2..95d7bfd777 100644
@@ -107,6 +107,11 @@ New Features
   * Extern objects and functions can be plugged into the pipeline.
   * Transaction-oriented table updates.
 
+* **Add new AVX512 specific classify algorithms for ACL library.**
+
+  * Added new ``RTE_ACL_CLASSIFY_AVX512X16`` vector implementation,
+    which can process up to 16 flows in parallel. Requires AVX512 support.
+
 
 Removed Items
 -------------
lib/librte_acl/acl.h +7 -0
index 543ce55659..7ac0d12f08 100644
@@ -76,6 +76,13 @@ struct rte_acl_bitset {
  * input_byte - ((uint8_t *)&transition)[4 + input_byte / 64].
  */
 
+/*
+ * Each ACL RT contains an idle nomatch node:
+ * a SINGLE node at predefined position (RTE_ACL_DFA_SIZE)
+ * that points to itself.
+ */
+#define RTE_ACL_IDLE_NODE	(RTE_ACL_DFA_SIZE | RTE_ACL_NODE_SINGLE)
+
 /*
  * Structure of a node is a set of ptrs and each ptr has a bit map
  * of values associated with this transition.
lib/librte_acl/acl_gen.c +1 -1
index f1b9d12f1e..e759a2ca15 100644
@@ -496,7 +496,7 @@ rte_acl_gen(struct rte_acl_ctx *ctx, struct rte_acl_trie *trie,
 	 * highest index, that points to itself)
 	 */
 
-	node_array[RTE_ACL_DFA_SIZE] = RTE_ACL_DFA_SIZE | RTE_ACL_NODE_SINGLE;
+	node_array[RTE_ACL_DFA_SIZE] = RTE_ACL_IDLE_NODE;
 
 	for (n = 0; n < RTE_ACL_DFA_SIZE; n++)
 		node_array[n] = no_match;
lib/librte_acl/acl_run_avx512.c +129 -0

145 lines not on this page · raw message

lib/librte_acl/acl_run_avx512x8.h new file +642 -0

642 lines not on this page · raw message

Signature · 1 line
2.17.1
#58 lore raw

PATCH v4 9/14 acl: update default classify algorithm selection

In reply to Konstantin Ananyev

On supported platforms, set RTE_ACL_CLASSIFY_AVX512X16 as default ACL classify algorithm.
Note that AVX512X16 implementation uses 256-bit registers/instincts only to avoid possibility of frequency drop.

---
 lib/librte_acl/rte_acl.c | 1 +
 1 file changed, 1 insertion(+)
lib/librte_acl/rte_acl.c +1 -0
index 1154f35107..245af672ee 100644
@@ -228,6 +228,7 @@ acl_get_best_alg(void)
 #elif defined(RTE_ARCH_PPC_64)
 		RTE_ACL_CLASSIFY_ALTIVEC,
 #elif defined(RTE_ARCH_X86)
+		RTE_ACL_CLASSIFY_AVX512X16,
 		RTE_ACL_CLASSIFY_AVX2,
 		RTE_ACL_CLASSIFY_SSE,
 #endif
Signature · 1 line
2.17.1
#59 lore raw

PATCH v4 10/14 acl: introduce 512-bit width AVX512 classify implementation

In reply to Konstantin Ananyev

Introduce classify implementation that uses AVX512 specific ISA. rte_acl_classify_avx512x32() is able to process up to 32 flows in parallel. It uses 512-bit width registers/instructions and provides higher performance then rte_acl_classify_avx512x16(), but can cause frequency level change.
Note that for now only 64-bit version is supported.

---
Depends-on: patch-79310 ("eal/x86: introduce AVX 512-bit type")

 .../prog_guide/packet_classif_access_ctrl.rst |  10 +
 doc/guides/rel_notes/release_20_11.rst        |   3 +
 lib/librte_acl/acl_run_avx512.c               |   6 +-
 lib/librte_acl/acl_run_avx512x16.h            | 732 ++++++++++++++++++
 4 files changed, 750 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_acl/acl_run_avx512x16.h
doc/guides/prog_guide/packet_classif_access_ctrl.rst +10 -0
index 11f4bc841b..7659af8eb5 100644
@@ -383,10 +383,20 @@ There are several implementations of classify algorithm:
     flows in parallel. Uses 256-bit width SIMD registers.
     Requires AVX512 support.
 
+*   **RTE_ACL_CLASSIFY_AVX512X32**: vector implementation, can process up to 32
+    flows in parallel. Uses 512-bit width SIMD registers.
+    Requires AVX512 support.
+
 It is purely a runtime decision which method to choose, there is no build-time difference.
 All implementations operates over the same internal RT structures and use similar principles. The main difference is that vector implementations can manually exploit IA SIMD instructions and process several input data flows in parallel.
 At startup ACL library determines the highest available classify method for the given platform and sets it as default one. Though the user has an ability to override the default classifier function for a given ACL context or perform particular search using non-default classify method. In that case it is user responsibility to make sure that given platform supports selected classify implementation.
 
+.. note::
+
+     Right now ``RTE_ACL_CLASSIFY_AVX512X32`` is not selected by default
+     (due to possible frequency level change), but it can be selected at
+     runtime by apps through the use of ACL API: ``rte_acl_set_ctx_classify``.
+
 Application Programming Interface (API) Usage
 ---------------------------------------------
 
doc/guides/rel_notes/release_20_11.rst +3 -0
index 95d7bfd777..001e46f595 100644
@@ -112,6 +112,9 @@ New Features
   * Added new ``RTE_ACL_CLASSIFY_AVX512X16`` vector implementation,
     which can process up to 16 flows in parallel. Requires AVX512 support.
 
+  * Added new ``RTE_ACL_CLASSIFY_AVX512X32`` vector implementation,
+    which can process up to 32 flows in parallel. Requires AVX512 support.
+
 
 Removed Items
 -------------
lib/librte_acl/acl_run_avx512.c +5 -1
index f5bc628b7c..74698fa2ea 100644
@@ -132,6 +132,8 @@ rte_acl_classify_avx512x16(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	return rte_acl_classify_scalar(ctx, data, results, num, categories);
 }
 
+#include "acl_run_avx512x16.h"
+
 int
 rte_acl_classify_avx512x32(const struct rte_acl_ctx *ctx, const uint8_t **data,
 	uint32_t *results, uint32_t num, uint32_t categories)
@@ -140,13 +142,15 @@ rte_acl_classify_avx512x32(const struct rte_acl_ctx *ctx, const uint8_t **data,
 
 	/* split huge lookup (gt 256) into series of fixed size ones */
 	while (num > max_iter) {
-		search_avx512x8x2(ctx, data, results, max_iter, categories);
+		search_avx512x16x2(ctx, data, results, max_iter, categories);
 		data += max_iter;
 		results += max_iter * categories;
 		num -= max_iter;
 	}
 
 	/* select classify method based on number of remaining requests */
+	if (num >= 2 * MAX_SEARCHES_AVX16)
+		return search_avx512x16x2(ctx, data, results, num, categories);
 	if (num >= MAX_SEARCHES_AVX16)
 		return search_avx512x8x2(ctx, data, results, num, categories);
 	if (num >= MAX_SEARCHES_SSE8)
lib/librte_acl/acl_run_avx512x16.h new file +732 -0

732 lines not on this page · raw message

Signature · 1 line
2.17.1
#60 lore raw

PATCH v4 11/14 acl: for AVX512 classify use 4B load whenever possible

In reply to Konstantin Ananyev

With current ACL implementation first field in the rule definition has always to be one byte long. Though for optimising classify implementation it might be useful to do 4B reads
(as we do for rest of the fields).
So at build phase, check user provided field definitions to determine is it safe to do 4B loads for first ACL field.
Then at run-time this information can be used to choose classify behavior.

---
 lib/librte_acl/acl.h               |  1 +
 lib/librte_acl/acl_bld.c           | 34 ++++++++++++++++++++++++++++++
 lib/librte_acl/acl_run_avx512.c    |  2 ++
 lib/librte_acl/acl_run_avx512x16.h |  8 +++----
 lib/librte_acl/acl_run_avx512x8.h  |  8 +++----
 lib/librte_acl/rte_acl.c           |  1 +
 6 files changed, 46 insertions(+), 8 deletions(-)
lib/librte_acl/acl.h +1 -0
index 7ac0d12f08..4089ab2a04 100644
@@ -169,6 +169,7 @@ struct rte_acl_ctx {
 	int32_t             socket_id;
 	/** Socket ID to allocate memory from. */
 	enum rte_acl_classify_alg alg;
+	uint32_t           first_load_sz;
 	void               *rules;
 	uint32_t            max_rules;
 	uint32_t            rule_sz;
lib/librte_acl/acl_bld.c +34 -0
index d1f920b09c..da10864cd8 100644
@@ -1581,6 +1581,37 @@ acl_check_bld_param(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 	return 0;
 }
 
+/*
+ * With current ACL implementation first field in the rule definition
+ * has always to be one byte long. Though for optimising *classify*
+ * implementation it might be useful to be able to use 4B reads
+ * (as we do for rest of the fields).
+ * This function checks input config to determine is it safe to do 4B
+ * loads for first ACL field. For that we need to make sure that
+ * first field in our rule definition doesn't have the biggest offset,
+ * i.e. we still do have other fields located after the first one.
+ * Contrary if first field has the largest offset, then it means
+ * first field can occupy the very last byte in the input data buffer,
+ * and we have to do single byte load for it.
+ */
+static uint32_t
+get_first_load_size(const struct rte_acl_config *cfg)
+{
+	uint32_t i, max_ofs, ofs;
+
+	ofs = 0;
+	max_ofs = 0;
+
+	for (i = 0; i != cfg->num_fields; i++) {
+		if (cfg->defs[i].field_index == 0)
+			ofs = cfg->defs[i].offset;
+		else if (max_ofs < cfg->defs[i].offset)
+			max_ofs = cfg->defs[i].offset;
+	}
+
+	return (ofs < max_ofs) ? sizeof(uint32_t) : sizeof(uint8_t);
+}
+
 int
 rte_acl_build(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 {
@@ -1618,6 +1649,9 @@ rte_acl_build(struct rte_acl_ctx *ctx, const struct rte_acl_config *cfg)
 				/* set data indexes. */
 				acl_set_data_indexes(ctx);
 
+				/* determine can we always do 4B load */
+				ctx->first_load_sz = get_first_load_size(cfg);
+
 				/* copy in build config. */
 				ctx->config = *cfg;
 			}
lib/librte_acl/acl_run_avx512.c +2 -0
index 74698fa2ea..3fd1e33c3f 100644
@@ -11,6 +11,7 @@ struct acl_flow_avx512 {
 	uint32_t num_packets;       /* number of packets processed */
 	uint32_t total_packets;     /* max number of packets to process */
 	uint32_t root_index;        /* current root index */
+	uint32_t first_load_sz;     /* first load size for new packet */
 	const uint64_t *trans;      /* transition table */
 	const uint32_t *data_index; /* input data indexes */
 	const uint8_t **idata;      /* input data */
@@ -24,6 +25,7 @@ acl_set_flow_avx512(struct acl_flow_avx512 *flow, const struct rte_acl_ctx *ctx,
 {
 	flow->num_packets = 0;
 	flow->total_packets = total_packets;
+	flow->first_load_sz = ctx->first_load_sz;
 	flow->root_index = ctx->trie[trie].root_index;
 	flow->trans = ctx->trans_table;
 	flow->data_index = ctx->trie[trie].data_index;
lib/librte_acl/acl_run_avx512x16.h +4 -4
index 981f8d16da..a39df8f3c0 100644
@@ -460,7 +460,7 @@ match_check_process_avx512x16x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[0] != 0) {
 			inp[0] = get_next_bytes_avx512x16(flow, &pdata[0],
-				rm[0], &di[0], sizeof(uint8_t));
+				rm[0], &di[0], flow->first_load_sz);
 			first_trans16(flow, inp[0], rm[0], &tr_lo[0],
 				&tr_hi[0]);
 			rm[0] = _mm512_test_epi32_mask(tr_lo[0],
@@ -469,7 +469,7 @@ match_check_process_avx512x16x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[1] != 0) {
 			inp[1] = get_next_bytes_avx512x16(flow, &pdata[2],
-				rm[1], &di[1], sizeof(uint8_t));
+				rm[1], &di[1], flow->first_load_sz);
 			first_trans16(flow, inp[1], rm[1], &tr_lo[1],
 				&tr_hi[1]);
 			rm[1] = _mm512_test_epi32_mask(tr_lo[1],
@@ -494,9 +494,9 @@ search_trie_avx512x16x2(struct acl_flow_avx512 *flow)
 	start_flow16(flow, MASK16_BIT, UINT16_MAX, &pdata[2], &idx[1], &di[1]);
 
 	in[0] = get_next_bytes_avx512x16(flow, &pdata[0], UINT16_MAX, &di[0],
-			sizeof(uint8_t));
+			flow->first_load_sz);
 	in[1] = get_next_bytes_avx512x16(flow, &pdata[2], UINT16_MAX, &di[1],
-			sizeof(uint8_t));
+			flow->first_load_sz);
 
 	first_trans16(flow, in[0], UINT16_MAX, &tr_lo[0], &tr_hi[0]);
 	first_trans16(flow, in[1], UINT16_MAX, &tr_lo[1], &tr_hi[1]);
lib/librte_acl/acl_run_avx512x8.h +4 -4
index cfba0299ed..fedd79b9ae 100644
@@ -418,7 +418,7 @@ match_check_process_avx512x8x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[0] != 0) {
 			inp[0] = get_next_bytes_avx512x8(flow, &pdata[0],
-				rm[0], &di[0], sizeof(uint8_t));
+				rm[0], &di[0], flow->first_load_sz);
 			first_trans8(flow, inp[0], rm[0], &tr_lo[0],
 				&tr_hi[0]);
 			rm[0] = _mm256_test_epi32_mask(tr_lo[0],
@@ -427,7 +427,7 @@ match_check_process_avx512x8x2(struct acl_flow_avx512 *flow, uint32_t fm[2],
 
 		if (n[1] != 0) {
 			inp[1] = get_next_bytes_avx512x8(flow, &pdata[2],
-				rm[1], &di[1], sizeof(uint8_t));
+				rm[1], &di[1], flow->first_load_sz);
 			first_trans8(flow, inp[1], rm[1], &tr_lo[1],
 				&tr_hi[1]);
 			rm[1] = _mm256_test_epi32_mask(tr_lo[1],
@@ -452,9 +452,9 @@ search_trie_avx512x8x2(struct acl_flow_avx512 *flow)
 	start_flow8(flow, MASK8_BIT, UINT8_MAX, &pdata[2], &idx[1], &di[1]);
 
 	in[0] = get_next_bytes_avx512x8(flow, &pdata[0], UINT8_MAX, &di[0],
-			sizeof(uint8_t));
+			flow->first_load_sz);
 	in[1] = get_next_bytes_avx512x8(flow, &pdata[2], UINT8_MAX, &di[1],
-			sizeof(uint8_t));
+			flow->first_load_sz);
 
 	first_trans8(flow, in[0], UINT8_MAX, &tr_lo[0], &tr_hi[0]);
 	first_trans8(flow, in[1], UINT8_MAX, &tr_lo[1], &tr_hi[1]);
lib/librte_acl/rte_acl.c +1 -0
index 245af672ee..f1474038e5 100644
@@ -500,6 +500,7 @@ rte_acl_dump(const struct rte_acl_ctx *ctx)
 	printf("acl context <%s>@%p\n", ctx->name, ctx);
 	printf("  socket_id=%"PRId32"\n", ctx->socket_id);
 	printf("  alg=%"PRId32"\n", ctx->alg);
+	printf("  first_load_sz=%"PRIu32"\n", ctx->first_load_sz);
 	printf("  max_rules=%"PRIu32"\n", ctx->max_rules);
 	printf("  rule_size=%"PRIu32"\n", ctx->rule_sz);
 	printf("  num_rules=%"PRIu32"\n", ctx->num_rules);
Signature · 1 line
2.17.1
#61 lore raw

PATCH v4 12/14 acl: deduplicate AVX512 code paths

In reply to Konstantin Ananyev

Current rte_acl_classify_avx512x32() and rte_acl_classify_avx512x16() code paths are very similar. The only differences are due to 256/512 register/instrincts naming conventions.
So to deduplicate the code:
- Move common code into “acl_run_avx512_common.h”
- Use macros to hide difference in naming conventions

---
 lib/librte_acl/acl_run_avx512_common.h | 477 +++++++++++++++++++++
 lib/librte_acl/acl_run_avx512x16.h     | 569 ++++---------------------
 lib/librte_acl/acl_run_avx512x8.h      | 565 ++++--------------------
 3 files changed, 654 insertions(+), 957 deletions(-)
 create mode 100644 lib/librte_acl/acl_run_avx512_common.h
lib/librte_acl/acl_run_avx512_common.h new file +477 -0
new file mode 100644
index 0000000000..1baf79b7ae
@@ -0,0 +1,477 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Intel Corporation
+ */
+
+/*
+ * WARNING: It is not recommended to include this file directly.
+ * Please include "acl_run_avx512x*.h" instead.
+ * To make this file to generate proper code an includer has to
+ * define several macros, refer to "acl_run_avx512x*.h" for more details.
+ */
+
+/*
+ * Calculate the address of the next transition for
+ * all types of nodes. Note that only DFA nodes and range
+ * nodes actually transition to another node. Match
+ * nodes not supposed to be encountered here.
+ * For quad range nodes:
+ * Calculate number of range boundaries that are less than the
+ * input value. Range boundaries for each node are in signed 8 bit,
+ * ordered from -128 to 127.
+ * This is effectively a popcnt of bytes that are greater than the
+ * input byte.
+ * Single nodes are processed in the same ways as quad range nodes.
+ */
+static __rte_always_inline _T_simd
+_F_(calc_addr)(_T_simd index_mask, _T_simd next_input, _T_simd shuffle_input,
+	_T_simd four_32, _T_simd range_base, _T_simd tr_lo, _T_simd tr_hi)
+{
+	__mmask64 qm;
+	_T_mask dfa_msk;
+	_T_simd addr, in, node_type, r, t;
+	_T_simd dfa_ofs, quad_ofs;
+
+	t = _M_SI_(xor)(index_mask, index_mask);
+	in = _M_I_(shuffle_epi8)(next_input, shuffle_input);
+
+	/* Calc node type and node addr */
+	node_type = _M_SI_(andnot)(index_mask, tr_lo);
+	addr = _M_SI_(and)(index_mask, tr_lo);
+
+	/* mask for DFA type(0) nodes */
+	dfa_msk = _M_I_(cmpeq_epi32_mask)(node_type, t);
+
+	/* DFA calculations. */
+	r = _M_I_(srli_epi32)(in, 30);
+	r = _M_I_(add_epi8)(r, range_base);
+	t = _M_I_(srli_epi32)(in, 24);
+	r = _M_I_(shuffle_epi8)(tr_hi, r);
+
+	dfa_ofs = _M_I_(sub_epi32)(t, r);
+
+	/* QUAD/SINGLE calculations. */
+	qm = _M_I_(cmpgt_epi8_mask)(in, tr_hi);
+	t = _M_I_(maskz_set1_epi8)(qm, (uint8_t)UINT8_MAX);
+	t = _M_I_(lzcnt_epi32)(t);
+	t = _M_I_(srli_epi32)(t, 3);
+	quad_ofs = _M_I_(sub_epi32)(four_32, t);
+
+	/* blend DFA and QUAD/SINGLE. */
+	t = _M_I_(mask_mov_epi32)(quad_ofs, dfa_msk, dfa_ofs);
+
+	/* calculate address for next transitions. */
+	addr = _M_I_(add_epi32)(addr, t);
+	return addr;
+}
+
+/*
+ * Process _N_ transitions in parallel.
+ * tr_lo contains low 32 bits for _N_ transition.
+ * tr_hi contains high 32 bits for _N_ transition.
+ * next_input contains up to 4 input bytes for _N_ flows.
+ */
+static __rte_always_inline _T_simd
+_F_(trans)(_T_simd next_input, const uint64_t *trans, _T_simd *tr_lo,
+	_T_simd *tr_hi)
+{
+	const int32_t *tr;
+	_T_simd addr;
+
+	tr = (const int32_t *)(uintptr_t)trans;
+
+	/* Calculate the address (array index) for all _N_ transitions. */
+	addr = _F_(calc_addr)(_SV_(index_mask), next_input, _SV_(shuffle_input),
+		_SV_(four_32), _SV_(range_base), *tr_lo, *tr_hi);
+
+	/* load lower 32 bits of _N_ transactions at once. */
+	*tr_lo = _M_GI_(i32gather_epi32, addr, tr, sizeof(trans[0]));
+
+	next_input = _M_I_(srli_epi32)(next_input, CHAR_BIT);
+
+	/* load high 32 bits of _N_ transactions at once. */
+	*tr_hi = _M_GI_(i32gather_epi32, addr, (tr + 1), sizeof(trans[0]));
+
+	return next_input;
+}
+
+/*
+ * Execute first transition for up to _N_ flows in parallel.
+ * next_input should contain one input byte for up to _N_ flows.
+ * msk - mask of active flows.
+ * tr_lo contains low 32 bits for up to _N_ transitions.
+ * tr_hi contains high 32 bits for up to _N_ transitions.
+ */
+static __rte_always_inline void
+_F_(first_trans)(const struct acl_flow_avx512 *flow, _T_simd next_input,
+	_T_mask msk, _T_simd *tr_lo, _T_simd *tr_hi)
+{
+	const int32_t *tr;
+	_T_simd addr, root;
+
+	tr = (const int32_t *)(uintptr_t)flow->trans;
+
+	addr = _M_I_(set1_epi32)(UINT8_MAX);
+	root = _M_I_(set1_epi32)(flow->root_index);
+
+	addr = _M_SI_(and)(next_input, addr);
+	addr = _M_I_(add_epi32)(root, addr);
+
+	/* load lower 32 bits of _N_ transactions at once. */
+	*tr_lo = _M_MGI_(mask_i32gather_epi32)(*tr_lo, msk, addr, tr,
+		sizeof(flow->trans[0]));
+
+	/* load high 32 bits of _N_ transactions at once. */
+	*tr_hi = _M_MGI_(mask_i32gather_epi32)(*tr_hi, msk, addr, (tr + 1),
+		sizeof(flow->trans[0]));
+}
+
+/*
+ * Load and return next 4 input bytes for up to _N_ flows in parallel.
+ * pdata - 8x2 pointers to flow input data
+ * mask - mask of active flows.
+ * di - data indexes for these _N_ flows.
+ */
+static inline _T_simd
+_F_(get_next_bytes)(const struct acl_flow_avx512 *flow, _T_simd pdata[2],
+	uint32_t msk, _T_simd *di, uint32_t bnum)
+{
+	const int32_t *div;
+	uint32_t m[2];
+	_T_simd one, zero, t, p[2];
+
+	div = (const int32_t *)flow->data_index;
+
+	one = _M_I_(set1_epi32)(1);
+	zero = _M_SI_(xor)(one, one);
+
+	/* load data offsets for given indexes */
+	t = _M_MGI_(mask_i32gather_epi32)(zero, msk, *di, div, sizeof(div[0]));
+
+	/* increment data indexes */
+	*di = _M_I_(mask_add_epi32)(*di, msk, *di, one);
+
+	/*
+	 * unsigned expand 32-bit indexes to 64-bit
+	 * (for later pointer arithmetic), i.e:
+	 * for (i = 0; i != _N_; i++)
+	 *   p[i/8].u64[i%8] = (uint64_t)t.u32[i];
+	 */
+	p[0] = _M_I_(maskz_permutexvar_epi32)(_SC_(pmidx_msk), _SV_(pmidx[0]),
+			t);
+	p[1] = _M_I_(maskz_permutexvar_epi32)(_SC_(pmidx_msk), _SV_(pmidx[1]),
+			t);
+
+	p[0] = _M_I_(add_epi64)(p[0], pdata[0]);
+	p[1] = _M_I_(add_epi64)(p[1], pdata[1]);
+
+	/* load input byte(s), either one or four */
+
+	m[0] = msk & _SIMD_PTR_MSK_;
+	m[1] = msk >> _SIMD_PTR_NUM_;
+
+	return _F_(gather_bytes)(zero, p, m, bnum);
+}
+
+/*
+ * Start up to _N_ new flows.
+ * num - number of flows to start
+ * msk - mask of new flows.
+ * pdata - pointers to flow input data
+ * idx - match indexed for given flows
+ * di - data indexes for these flows.
+ */
+static inline void
+_F_(start_flow)(struct acl_flow_avx512 *flow, uint32_t num, uint32_t msk,
+	_T_simd pdata[2], _T_simd *idx, _T_simd *di)
+{
+	uint32_t n, m[2], nm[2];
+	_T_simd ni, nd[2];
+
+	/* split mask into two - one for each pdata[] */
+	m[0] = msk & _SIMD_PTR_MSK_;
+	m[1] = msk >> _SIMD_PTR_NUM_;
+
+	/* calculate masks for new flows */
+	n = __builtin_popcount(m[0]);
+	nm[0] = (1 << n) - 1;
+	nm[1] = (1 << (num - n)) - 1;
+
+	/* load input data pointers for new flows */
+	nd[0] = _M_I_(maskz_loadu_epi64)(nm[0],
+			flow->idata + flow->num_packets);
+	nd[1] = _M_I_(maskz_loadu_epi64)(nm[1],
+			flow->idata + flow->num_packets + n);
+
+	/* calculate match indexes of new flows */
+	ni = _M_I_(set1_epi32)(flow->num_packets);
+	ni = _M_I_(add_epi32)(ni, _SV_(idx_add));
+
+	/* merge new and existing flows data */
+	pdata[0] = _M_I_(mask_expand_epi64)(pdata[0], m[0], nd[0]);
+	pdata[1] = _M_I_(mask_expand_epi64)(pdata[1], m[1], nd[1]);
+
+	/* update match and data indexes */
+	*idx = _M_I_(mask_expand_epi32)(*idx, msk, ni);
+	*di = _M_I_(maskz_mov_epi32)(msk ^ _SIMD_MASK_MAX_, *di);
+
+	flow->num_packets += num;
+}
+
+/*
+ * Process found matches for up to _N_ flows.
+ * fmsk - mask of active flows
+ * rmsk - mask of found matches
+ * pdata - pointers to flow input data
+ * di - data indexes for these flows
+ * idx - match indexed for given flows
+ * tr_lo contains low 32 bits for up to _N_ transitions.
+ * tr_hi contains high 32 bits for up to _N_ transitions.
+ */
+static inline uint32_t
+_F_(match_process)(struct acl_flow_avx512 *flow, uint32_t *fmsk,
+	uint32_t *rmsk, _T_simd pdata[2], _T_simd *di, _T_simd *idx,
+	_T_simd *tr_lo, _T_simd *tr_hi)
+{
+	uint32_t n;
+	_T_simd res;
+
+	if (rmsk[0] == 0)
+		return 0;
+
+	/* extract match indexes */
+	res = _M_SI_(and)(tr_lo[0], _SV_(index_mask));
+
+	/* mask  matched transitions to nop */
+	tr_lo[0] = _M_I_(mask_mov_epi32)(tr_lo[0], rmsk[0], _SV_(trlo_idle));
+	tr_hi[0] = _M_I_(mask_mov_epi32)(tr_hi[0], rmsk[0], _SV_(trhi_idle));
+
+	/* save found match indexes */
+	_M_I_(mask_i32scatter_epi32)(flow->matches, rmsk[0], idx[0], res,
+			sizeof(flow->matches[0]));
+
+	/* update masks and start new flows for matches */
+	n = update_flow_mask(flow, fmsk, rmsk);
+	_F_(start_flow)(flow, n, rmsk[0], pdata, idx, di);
+
+	return n;
+}
+
+/*
+ * Test for matches ut to (2 * _N_) flows at once,
+ * if matches exist - process them and start new flows.
+ */
+static inline void
+_F_(match_check_process)(struct acl_flow_avx512 *flow, uint32_t fm[2],
+	_T_simd pdata[4], _T_simd di[2], _T_simd idx[2], _T_simd inp[2],
+	_T_simd tr_lo[2], _T_simd tr_hi[2])
+{
+	uint32_t n[2];
+	uint32_t rm[2];
+
+	/* check for matches */
+	rm[0] = _M_I_(test_epi32_mask)(tr_lo[0], _SV_(match_mask));
+	rm[1] = _M_I_(test_epi32_mask)(tr_lo[1], _SV_(match_mask));
+
+	/* till unprocessed matches exist */
+	while ((rm[0] | rm[1]) != 0) {
+
+		/* process matches and start new flows */
+		n[0] = _F_(match_process)(flow, &fm[0], &rm[0], &pdata[0],
+			&di[0], &idx[0], &tr_lo[0], &tr_hi[0]);
+		n[1] = _F_(match_process)(flow, &fm[1], &rm[1], &pdata[2],
+			&di[1], &idx[1], &tr_lo[1], &tr_hi[1]);
+
+		/* execute first transition for new flows, if any */
+
+		if (n[0] != 0) {
+			inp[0] = _F_(get_next_bytes)(flow, &pdata[0],
+					rm[0], &di[0], flow->first_load_sz);
+			_F_(first_trans)(flow, inp[0], rm[0], &tr_lo[0],
+					&tr_hi[0]);
+			rm[0] = _M_I_(test_epi32_mask)(tr_lo[0],
+					_SV_(match_mask));
+		}
+
+		if (n[1] != 0) {
+			inp[1] = _F_(get_next_bytes)(flow, &pdata[2],
+					rm[1], &di[1], flow->first_load_sz);
+			_F_(first_trans)(flow, inp[1], rm[1], &tr_lo[1],
+					&tr_hi[1]);
+			rm[1] = _M_I_(test_epi32_mask)(tr_lo[1],
+					_SV_(match_mask));
+		}
+	}
+}
+
+/*
+ * Perform search for up to (2 * _N_) flows in parallel.
+ * Use two sets of metadata, each serves _N_ flows max.
+ */
+static inline void
+_F_(search_trie)(struct acl_flow_avx512 *flow)
+{
+	uint32_t fm[2];
+	_T_simd di[2], idx[2], in[2], pdata[4], tr_lo[2], tr_hi[2];
+
+	/* first 1B load */
+	_F_(start_flow)(flow, _SIMD_MASK_BIT_, _SIMD_MASK_MAX_,
+			&pdata[0], &idx[0], &di[0]);
+	_F_(start_flow)(flow, _SIMD_MASK_BIT_, _SIMD_MASK_MAX_,
+			&pdata[2], &idx[1], &di[1]);
+
+	in[0] = _F_(get_next_bytes)(flow, &pdata[0], _SIMD_MASK_MAX_, &di[0],
+			flow->first_load_sz);
+	in[1] = _F_(get_next_bytes)(flow, &pdata[2], _SIMD_MASK_MAX_, &di[1],
+			flow->first_load_sz);
+
+	_F_(first_trans)(flow, in[0], _SIMD_MASK_MAX_, &tr_lo[0], &tr_hi[0]);
+	_F_(first_trans)(flow, in[1], _SIMD_MASK_MAX_, &tr_lo[1], &tr_hi[1]);
+
+	fm[0] = _SIMD_MASK_MAX_;
+	fm[1] = _SIMD_MASK_MAX_;
+
+	/* match check */
+	_F_(match_check_process)(flow, fm, pdata, di, idx, in, tr_lo, tr_hi);
+
+	while ((fm[0] | fm[1]) != 0) {
+
+		/* load next 4B */
+
+		in[0] = _F_(get_next_bytes)(flow, &pdata[0], fm[0],
+				&di[0], sizeof(uint32_t));
+		in[1] = _F_(get_next_bytes)(flow, &pdata[2], fm[1],
+				&di[1], sizeof(uint32_t));
+
+		/* main 4B loop */
+
+		in[0] = _F_(trans)(in[0], flow->trans, &tr_lo[0], &tr_hi[0]);
+		in[1] = _F_(trans)(in[1], flow->trans, &tr_lo[1], &tr_hi[1]);
+
+		in[0] = _F_(trans)(in[0], flow->trans, &tr_lo[0], &tr_hi[0]);
+		in[1] = _F_(trans)(in[1], flow->trans, &tr_lo[1], &tr_hi[1]);
+
+		in[0] = _F_(trans)(in[0], flow->trans, &tr_lo[0], &tr_hi[0]);
+		in[1] = _F_(trans)(in[1], flow->trans, &tr_lo[1], &tr_hi[1]);
+
+		in[0] = _F_(trans)(in[0], flow->trans, &tr_lo[0], &tr_hi[0]);
+		in[1] = _F_(trans)(in[1], flow->trans, &tr_lo[1], &tr_hi[1]);
+
+		/* check for matches */
+		_F_(match_check_process)(flow, fm, pdata, di, idx, in,
+			tr_lo, tr_hi);
+	}
+}
+
+/*
+ * resolve match index to actual result/priority offset.
+ */
+static inline _T_simd
+_F_(resolve_match_idx)(_T_simd mi)
+{
+	RTE_BUILD_BUG_ON(sizeof(struct rte_acl_match_results) !=
+		1 << (match_log + 2));
+	return _M_I_(slli_epi32)(mi, match_log);
+}
+
+/*
+ * Resolve multiple matches for the same flow based on priority.
+ */
+static inline _T_simd
+_F_(resolve_pri)(const int32_t res[], const int32_t pri[],
+	const uint32_t match[], _T_mask msk, uint32_t nb_trie,
+	uint32_t nb_skip)
+{
+	uint32_t i;
+	const uint32_t *pm;
+	_T_mask m;
+	_T_simd cp, cr, np, nr, mch;
+
+	const _T_simd zero = _M_I_(set1_epi32)(0);
+
+	/* get match indexes */
+	mch = _M_I_(maskz_loadu_epi32)(msk, match);
+	mch = _F_(resolve_match_idx)(mch);
+
+	/* read result and priority values for first trie */
+	cr = _M_MGI_(mask_i32gather_epi32)(zero, msk, mch, res, sizeof(res[0]));
+	cp = _M_MGI_(mask_i32gather_epi32)(zero, msk, mch, pri, sizeof(pri[0]));
+
+	/*
+	 * read result and priority values for next tries and select one
+	 * with highest priority.
+	 */
+	for (i = 1, pm = match + nb_skip; i != nb_trie;
+			i++, pm += nb_skip) {
+
+		mch = _M_I_(maskz_loadu_epi32)(msk, pm);
+		mch = _F_(resolve_match_idx)(mch);
+
+		nr = _M_MGI_(mask_i32gather_epi32)(zero, msk, mch, res,
+				sizeof(res[0]));
+		np = _M_MGI_(mask_i32gather_epi32)(zero, msk, mch, pri,
+				sizeof(pri[0]));
+
+		m = _M_I_(cmpgt_epi32_mask)(cp, np);
+		cr = _M_I_(mask_mov_epi32)(nr, m, cr);
+		cp = _M_I_(mask_mov_epi32)(np, m, cp);
+	}
+
+	return cr;
+}
+
+/*
+ * Resolve num (<= _N_) matches for single category
+ */
+static inline void
+_F_(resolve_sc)(uint32_t result[], const int32_t res[],
+	const int32_t pri[], const uint32_t match[], uint32_t nb_pkt,
+	uint32_t nb_trie, uint32_t nb_skip)
+{
+	_T_mask msk;
+	_T_simd cr;
+
+	msk = (1 << nb_pkt) - 1;
+	cr = _F_(resolve_pri)(res, pri, match, msk, nb_trie, nb_skip);
+	_M_I_(mask_storeu_epi32)(result, msk, cr);
+}
+
+/*
+ * Resolve matches for single category
+ */
+static inline void
+_F_(resolve_single_cat)(uint32_t result[],
+	const struct rte_acl_match_results pr[], const uint32_t match[],
+	uint32_t nb_pkt, uint32_t nb_trie)
+{
+	uint32_t j, k, n;
+	const int32_t *res, *pri;
+	_T_simd cr[2];
+
+	res = (const int32_t *)pr->results;
+	pri = pr->priority;
+
+	for (k = 0; k != (nb_pkt & ~_SIMD_FLOW_MSK_); k += _SIMD_FLOW_NUM_) {
+
+		j = k + _SIMD_MASK_BIT_;
+
+		cr[0] = _F_(resolve_pri)(res, pri, match + k, _SIMD_MASK_MAX_,
+				nb_trie, nb_pkt);
+		cr[1] = _F_(resolve_pri)(res, pri, match + j, _SIMD_MASK_MAX_,
+				nb_trie, nb_pkt);
+
+		_M_SI_(storeu)((void *)(result + k), cr[0]);
+		_M_SI_(storeu)((void *)(result + j), cr[1]);
+	}
+
+	n = nb_pkt - k;
+	if (n != 0) {
+		if (n > _SIMD_MASK_BIT_) {
+			_F_(resolve_sc)(result + k, res, pri, match + k,
+				_SIMD_MASK_BIT_, nb_trie, nb_pkt);
+			k += _SIMD_MASK_BIT_;
+			n -= _SIMD_MASK_BIT_;
+		}
+		_F_(resolve_sc)(result + k, res, pri, match + k, n,
+				nb_trie, nb_pkt);
+	}
+}
lib/librte_acl/acl_run_avx512x16.h +89 -480

690 lines not on this page · raw message

lib/librte_acl/acl_run_avx512x8.h +88 -477

676 lines not on this page · raw message

Signature · 1 line
2.17.1
#62 lore raw

Re: [dpdk-dev] [PATCH v4 12/14] acl: deduplicate AVX512 code paths

Quoted 8 lines · Konstantin Ananyev

Current rte_acl_classify_avx512x32() and rte_acl_classify_avx512x16() code paths are very similar. The only differences are due to 256/512 register/instrincts naming conventions.
So to deduplicate the code:
- Move common code into “acl_run_avx512_common.h”
- Use macros to hide difference in naming conventions

<...>

Review _m256_mask_gather_epi8x4(__m256i pdata, __mmask8 mask) · line 162

Quoted 3 lines
(quoted diff) +0 -0
@@ -120,7 +161,7 @@ _m256_mask_gather_epi8x4(__m256i pdata, __mmask8 mask)
 
  	static const uint32_t zero;

icc complains about this, although it is static [1]. Would it be acceptable to initialize variable explicitly to '0'?

[1]
In file included from ../lib/librte_acl/acl_run_avx512.c(110):
../lib/librte_acl/acl_run_avx512x8.h(162): warning #300: const variable "zero" requires an initializer

        static const uint32_t zero;
                                 ^

In file included from ../lib/librte_acl/acl_run_avx512.c(137):
../lib/librte_acl/acl_run_avx512x16.h(198): warning #300: const variable "zero" requires an initializer

        static const uint32_t zero;
                                 ^
#63 lore raw

Re: [dpdk-dev] [PATCH v4 12/14] acl: deduplicate AVX512 code paths

16/10/2020 17:56, Ferruh Yigit:

Quoted 8 lines · Konstantin Ananyev

Review _m256_mask_gather_epi8x4(__m256i pdata, __mmask8 mask) · line 162

Quoted 3 lines
(quoted diff) +0 -0
@@ -120,7 +161,7 @@ _m256_mask_gather_epi8x4(__m256i pdata, __mmask8 mask)
 
  	static const uint32_t zero;

icc complains about this, although it is static [1]. Would it be acceptable to initialize variable explicitly to '0'?

Quoted 5 lines

[1]
In file included from ../lib/librte_acl/acl_run_avx512.c(110):
../lib/librte_acl/acl_run_avx512x8.h(162): warning #300: const variable "zero" requires an initializer

         static const uint32_t zero;

icc should be fixed in my opinion

It's already hard to have code warning-free for gcc and clang, I don't think we should bother with warnings from exotic compilers. It is not a blocking issue, right?

#64 lore raw

PATCH v4 13/14 test/acl: add AVX512 classify support

In reply to Konstantin Ananyev

Add AVX512 classify to the test coverage.

---
 app/test/test_acl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
app/test/test_acl.c +4 -2
index 333b347579..5b32347954 100644
@@ -278,8 +278,8 @@ test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 
 	/* set given classify alg, skip test if alg is not supported */
 	ret = rte_acl_set_ctx_classify(acx, alg);
-	if (ret == -ENOTSUP)
-		return 0;
+	if (ret != 0)
+		return (ret == -ENOTSUP) ? 0 : ret;
 
 	/**
 	 * these will run quite a few times, it's necessary to test code paths
@@ -341,6 +341,8 @@ test_classify_run(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 		RTE_ACL_CLASSIFY_AVX2,
 		RTE_ACL_CLASSIFY_NEON,
 		RTE_ACL_CLASSIFY_ALTIVEC,
+		RTE_ACL_CLASSIFY_AVX512X16,
+		RTE_ACL_CLASSIFY_AVX512X32,
 	};
 
 	/* swap all bytes in the data to network order */
Signature · 1 line
2.17.1
#65 lore raw

Re: [dpdk-dev] [PATCH v4 13/14] test/acl: add AVX512 classify support

Quoted 13 lines · Konstantin Ananyev

Add AVX512 classify to the test coverage.

---
 app/test/test_acl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
app/test/test_acl.c +0 -0
index 333b347579..5b32347954 100644

app/test/test_acl.c test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[], · line 282

Quoted 7 lines
app/test/test_acl.c +2 -2
@@ -278,8 +278,8 @@ test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 
        /* set given classify alg, skip test if alg is not supported */
        ret = rte_acl_set_ctx_classify(acx, alg);
-       if (ret == -ENOTSUP)
-               return 0;
+       if (ret != 0)
+               return (ret == -ENOTSUP) ? 0 : ret;

Does this really belong to this patch?
I would expect it in "test/acl: expand classify test coverage".

Signature · 1 line
David Marchand
#66 lore raw

Re: [dpdk-dev] [PATCH v4 13/14] test/acl: add AVX512 classify support

Quoted 19 lines
Quoted 14 lines · Konstantin Ananyev

Add AVX512 classify to the test coverage.

---
 app/test/test_acl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
app/test/test_acl.c +0 -0
index 333b347579..5b32347954 100644
@@ -278,8 +278,8 @@ test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 
Quoted 9 lines

app/test/test_acl.c test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[], · line 282

Quoted 6 lines
app/test/test_acl.c +2 -2
        /* set given classify alg, skip test if alg is not supported */
        ret = rte_acl_set_ctx_classify(acx, alg);
-       if (ret == -ENOTSUP)
-               return 0;
+       if (ret != 0)
+               return (ret == -ENOTSUP) ? 0 : ret;

Does this really belong to this patch?
I would expect it in "test/acl: expand classify test coverage".

Yes, you right.
Do you want me to re-spin?
Konstantin

#67 lore raw

Re: [dpdk-dev] [PATCH v4 13/14] test/acl: add AVX512 classify support

Quoted 26 lines · Konstantin
Quoted 16 lines
Quoted 14 lines · Konstantin Ananyev

Add AVX512 classify to the test coverage.

---
 app/test/test_acl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
app/test/test_acl.c +0 -0
index 333b347579..5b32347954 100644
@@ -278,8 +278,8 @@ test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[],
 
Quoted 9 lines

app/test/test_acl.c test_classify_alg(struct rte_acl_ctx *acx, struct ipv4_7tuple test_data[], · line 282

Quoted 6 lines
app/test/test_acl.c +2 -2
        /* set given classify alg, skip test if alg is not supported */
        ret = rte_acl_set_ctx_classify(acx, alg);
-       if (ret == -ENOTSUP)
-               return 0;
+       if (ret != 0)
+               return (ret == -ENOTSUP) ? 0 : ret;

Does this really belong to this patch?
I would expect it in "test/acl: expand classify test coverage".

Quoted 2 lines

Yes, you right.
Do you want me to re-spin?

No need for this, thanks.

Signature · 1 line
David Marchand
#68 lore raw

PATCH v4 14/14 app/acl: add AVX512 classify support

In reply to Konstantin Ananyev

Add ability to use AVX512 classify method.

---
 app/test-acl/main.c | 8 ++++++++
 1 file changed, 8 insertions(+)
app/test-acl/main.c +8 -0
index d9b65517cb..2a3a35a054 100644
@@ -81,6 +81,14 @@ static const struct acl_alg acl_alg[] = {
 		.name = "altivec",
 		.alg = RTE_ACL_CLASSIFY_ALTIVEC,
 	},
+	{
+		.name = "avx512x16",
+		.alg = RTE_ACL_CLASSIFY_AVX512X16,
+	},
+	{
+		.name = "avx512x32",
+		.alg = RTE_ACL_CLASSIFY_AVX512X32,
+	},
 };
 
 static struct {
Signature · 1 line
2.17.1
#69 lore raw

Re: [dpdk-dev] [PATCH v4 00/14] acl: introduce AVX512 classify methods

In reply to Konstantin Ananyev
Quoted 17 lines · Konstantin Ananyev

These patch series introduce support of AVX512 specific classify implementation for ACL library.
It adds two new algorithms:
- RTE_ACL_CLASSIFY_AVX512X16 - can process up to 16 flows in parallel. It uses 256-bit width instructions/registers only
(to avoid frequency level change).
On my SKX box test-acl shows ~15-30% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X16 classify algorithms.
- RTE_ACL_CLASSIFY_AVX512X32 - can process up to 32 flows in parallel. It uses 512-bit width instructions/registers and provides higher performance then AVX512X16, but can cause frequency level change. On my SKX box test-acl shows ~50-70% improvement (depending on rule-set and input burst size)
when switching from AVX2 to AVX512X32 classify algorithms. ICX and CLX testing showed similar level of speedup.

Series applied, thanks.

Signature · 1 line
David Marchand