ARM: dts: sun8i: v3s: Add simple-framebuffer
Subsystems (2)
PATCH 1/1 ARM: dts: sun8i: v3s: Add simple-framebuffer
Add support for "allwinner,simple-framebuffer" with "mixer0-lcd0" pipeline from boot loader (u-boot). It depends on boot loader implementation of DE2/TCON0 setup with LCD.
Signed-off-by Martin Cerveny <[email protected]>
--- arch/arm/boot/dts/sun8i-v3s.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm/boot/dts/sun8i-v3s.dtsi +16 -0
@@ -43,12 +43,28 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-v3s-ccu.h> #include <dt-bindings/reset/sun8i-v3s-ccu.h> +#include <dt-bindings/clock/sun8i-de2.h> / { #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer-lcd { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "mixer0-lcd0"; + clocks = <&display_clocks CLK_MIXER0>, + <&ccu CLK_TCON0>; + status = "disabled"; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>;
Signature · 1 line
2.17.1
Maxime Ripard
AppliedHi,
Quoted 6 lines · Martin Cerveny
Add support for "allwinner,simple-framebuffer" with "mixer0-lcd0" pipeline from boot loader (u-boot). It depends on boot loader implementation of DE2/TCON0 setup with LCD.
Signed-off-by Martin Cerveny <[email protected]>
queued for 5.11, thanks!
Maxime