Skip to contentSkip to conversation

ASoC: dt-bindings: correct interrupt flags in examples

PATCH Superseded Krzysztof Kozlowski 2 participants 2 messages Sep 17, 2020

Subsystems (2)
Device tree bindings ASoC
lore
Share & tools
lore

Krzysztof Kozlowski

author
#0 lore raw

PATCH v2 1/1 ASoC: dt-bindings: correct interrupt flags in examples

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Signed-off-by Krzysztof Kozlowski <[email protected]>
Acked-by Rob Herring <[email protected]>

---

Changes since v1:
1. Add acks

---
 Documentation/devicetree/bindings/sound/max98090.txt | 2 +-
 Documentation/devicetree/bindings/sound/rt5640.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5659.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5665.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5668.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5677.txt   | 2 +-
 Documentation/devicetree/bindings/sound/rt5682.txt   | 2 +-
 7 files changed, 7 insertions(+), 7 deletions(-)
Documentation/devicetree/bindings/sound/max98090.txt +1 -1
index 7e1bbd5c27fd..39d640294c62 100644
@@ -55,5 +55,5 @@ audio-codec@10 {
 	compatible = "maxim,max98090";
 	reg = <0x10>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_LEVEL_HIGH>;
 };
Documentation/devicetree/bindings/sound/rt5640.txt +1 -1
index e40e4893eed8..ff1228713f7e 100644
@@ -88,7 +88,7 @@ rt5640 {
 	compatible = "realtek,rt5640";
 	reg = <0x1c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
Documentation/devicetree/bindings/sound/rt5659.txt +1 -1
index 1766e0543fc5..56788f50b6cf 100644
@@ -72,7 +72,7 @@ rt5659 {
 	compatible = "realtek,rt5659";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
Documentation/devicetree/bindings/sound/rt5665.txt +1 -1
index 8df170506986..f6ca96b4ce98 100644
@@ -62,7 +62,7 @@ rt5659 {
 	compatible = "realtek,rt5665";
 	reg = <0x1b>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
 };
Documentation/devicetree/bindings/sound/rt5668.txt +1 -1
index c88b96e7764b..a2b7e9a2f2f3 100644
@@ -41,7 +41,7 @@ rt5668 {
 	compatible = "realtek,rt5668b";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;
Documentation/devicetree/bindings/sound/rt5677.txt +1 -1
index 1b3c13d206ff..da2430099181 100644
@@ -64,7 +64,7 @@ rt5677 {
 	compatible = "realtek,rt5677";
 	reg = <0x2c>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
 
 	gpio-controller;
 	#gpio-cells = <2>;
Documentation/devicetree/bindings/sound/rt5682.txt +1 -1
index ade1ece8b45f..707fa98d1310 100644
@@ -58,7 +58,7 @@ rt5682 {
 	compatible = "realtek,rt5682i";
 	reg = <0x1a>;
 	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+	interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
 	realtek,ldo1-en-gpios =
 		<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
 	realtek,dmic1-data-pin = <1>;
Signature · 1 line
2.17.1
maintainer
#1 lore raw
Quoted 2 lines · Krzysztof Kozlowski

Changes since v1:
1. Add acks

Please don't resend things just for acks, it gets noisy.