configure: move cocoa option to Meson
PATCH 1/1 configure: move cocoa option to Meson
While detection of the framework was already there, moving the option allows for better error reporting.
--- configure | 17 +++++++---------- meson.build | 10 ++++++++-- meson_options.txt | 2 ++ ui/meson.build | 2 +- 4 files changed, 18 insertions(+), 13 deletions(-)
configure +7 -10
@@ -448,7 +448,7 @@ bsd="no" linux="no" solaris="no" profiler="no" -cocoa="no" +cocoa="auto" softmmu="yes" linux_user="no" bsd_user="no"
@@ -868,7 +868,7 @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - cocoa="yes" + cocoa="enabled" audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS"
@@ -1240,10 +1240,10 @@ for opt do ;; --enable-profiler) profiler="yes" ;; - --disable-cocoa) cocoa="no" + --disable-cocoa) cocoa="disabled" ;; --enable-cocoa) - cocoa="yes" ; + cocoa="enabled" ; audio_drv_list="coreaudio $(echo $audio_drv_list | sed s,coreaudio,,g)" ;; --disable-system) softmmu="no"
@@ -2388,8 +2388,8 @@ fi # cocoa implies not SDL or GTK # (the cocoa UI code currently assumes it is always the active UI # and doesn't interact well with other UI frontend code) -if test "$cocoa" = "yes"; then - if test "$sdl" = "yes"; then +if test "$cocoa" = "enabled"; then + if test "$sdl" = "enabled"; then error_exit "Cocoa and SDL UIs cannot both be enabled at once" fi if test "$gtk" = "yes"; then
@@ -6622,9 +6622,6 @@ if test "$have_x11" = "yes" && test "$need_x11" = "yes"; then echo "X11_CFLAGS=$x11_cflags" >> $config_host_mak echo "X11_LIBS=$x11_libs" >> $config_host_mak fi -if test "$cocoa" = "yes" ; then - echo "CONFIG_COCOA=y" >> $config_host_mak -fi if test "$iconv" = "yes" ; then echo "CONFIG_ICONV=y" >> $config_host_mak echo "ICONV_CFLAGS=$iconv_cflags" >> $config_host_mak
@@ -7937,7 +7934,7 @@ NINJA=${ninja:-$PWD/ninjatool} $meson setup \ -Db_pie=$(if test "$pie" = yes; then echo true; else echo false; fi) \ -Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \ -Dmalloc=$malloc -Dmalloc_trim=$malloc_trim \ - -Dsdl=$sdl -Dsdl_image=$sdl_image \ + -Dcocoa=$cocoa -Dsdl=$sdl -Dsdl_image=$sdl_image \ -Dvnc=$vnc -Dvnc_sasl=$vnc_sasl -Dvnc_jpeg=$vnc_jpeg -Dvnc_png=$vnc_png \ -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f\ $cross_arg \
meson.build +8 -2
@@ -88,7 +88,7 @@ socket = [] version_res = [] coref = [] iokit = [] -cocoa = [] +cocoa = not_found hvf = [] if targetos == 'windows' socket = cc.find_library('ws2_32')
@@ -101,7 +101,7 @@ if targetos == 'windows' elif targetos == 'darwin' coref = dependency('appleframeworks', modules: 'CoreFoundation') iokit = dependency('appleframeworks', modules: 'IOKit') - cocoa = dependency('appleframeworks', modules: 'Cocoa') + cocoa = dependency('appleframeworks', modules: 'Cocoa', required: get_option('cocoa')) hvf = dependency('appleframeworks', modules: 'Hypervisor') elif targetos == 'sunos' socket = [cc.find_library('socket'),
@@ -112,6 +112,11 @@ elif targetos == 'haiku' cc.find_library('network'), cc.find_library('bsd')] endif + +if not cocoa.found() and get_option('cocoa').enabled() + error('Cocoa not available on this platform') +endif + # The path to glib.h is added to all compilation commands. This was # grandfathered in from the QEMU Makefiles. add_project_arguments(config_host['GLIB_CFLAGS'].split(),
@@ -461,6 +466,7 @@ endif # Create config-host.h +config_host_data.set('CONFIG_COCOA', cocoa.found()) config_host_data.set('CONFIG_SDL', sdl.found()) config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found()) config_host_data.set('CONFIG_VNC', vnc.found())
meson_options.txt +2 -0
@@ -11,6 +11,8 @@ option('malloc_trim', type : 'feature', value : 'auto', option('malloc', type : 'combo', choices : ['system', 'tcmalloc', 'jemalloc'], value: 'system', description: 'choose memory allocator to use') +option('cocoa', type : 'feature', value : 'auto', + description: 'Cocoa user interface (macOS only)') option('sdl', type : 'feature', value : 'auto', description: 'SDL user interface') option('sdl_image', type : 'feature', value : 'auto',
ui/meson.build +1 -1
@@ -15,7 +15,7 @@ softmmu_ss.add(files( softmmu_ss.add(when: 'CONFIG_LINUX', if_true: files('input-linux.c')) softmmu_ss.add(when: 'CONFIG_SPICE', if_true: files('spice-core.c', 'spice-input.c', 'spice-display.c')) -softmmu_ss.add(when: [cocoa, 'CONFIG_COCOA'], if_true: files('cocoa.m')) +softmmu_ss.add(when: cocoa, if_true: files('cocoa.m')) vnc_ss = ss.source_set() vnc_ss.add(files(
Signature · 1 line
2.26.2
configure for opt do · line 1246
Quoted 3 lines · Paolo Bonzini
--enable-cocoa)configure +1
-1- cocoa="yes" ; + cocoa="enabled" ;
Lose the stray ; at the same time?
Quoted 10 lines
meson.build +1
-1@@ -101,7 +101,7 @@ if targetos == 'windows' elif targetos == 'darwin' coref = dependency('appleframeworks', modules: 'CoreFoundation') iokit = dependency('appleframeworks', modules: 'IOKit') - cocoa = dependency('appleframeworks', modules: 'Cocoa') + cocoa = dependency('appleframeworks', modules: 'Cocoa', required: get_option('cocoa')) hvf = dependency('appleframeworks', modules: 'Hypervisor') elif targetos == 'sunos' socket = [cc.find_library('socket'),
meson.build elif targetos == 'haiku' · line 118
Quoted 7 lines
meson.build +4
-0@@ -112,6 +112,11 @@ elif targetos == 'haiku' cc.find_library('network'), cc.find_library('bsd')] endif + +if not cocoa.found() and get_option('cocoa').enabled() + error('Cocoa not available on this platform') +endif
Isn't the error redundant with the required above?
r~
Quoted 1 line · Richard Henderson
Isn't the error redundant with the required above?
Nevermind. Obviously the required: is buried under the targetos check. ENOCOFFEE.
r~
Quoted 148 lines · Paolo Bonzini
While detection of the framework was already there, moving the option allows for better error reporting.
Reported-by Christophe de Dinechin <[email protected]>Signed-off-by Paolo Bonzini <[email protected]>--- configure | 17 +++++++---------- meson.build | 10 ++++++++-- meson_options.txt | 2 ++ ui/meson.build | 2 +- 4 files changed, 18 insertions(+), 13 deletions(-)configure +7
-10@@ -448,7 +448,7 @@ bsd="no" linux="no" solaris="no" profiler="no" -cocoa="no" +cocoa="auto" softmmu="yes" linux_user="no" bsd_user="no"@@ -868,7 +868,7 @@ Darwin) QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS" fi - cocoa="yes" + cocoa="enabled" audio_drv_list="coreaudio try-sdl" audio_possible_drivers="coreaudio sdl" QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS"@@ -1240,10 +1240,10 @@ for opt do ;; --enable-profiler) profiler="yes" ;; - --disable-cocoa) cocoa="no" + --disable-cocoa) cocoa="disabled" ;; --enable-cocoa) - cocoa="yes" ; + cocoa="enabled" ; audio_drv_list="coreaudio $(echo $audio_drv_list | sed s,coreaudio,,g)" ;; --disable-system) softmmu="no"@@ -2388,8 +2388,8 @@ fi # cocoa implies not SDL or GTK # (the cocoa UI code currently assumes it is always the active UI # and doesn't interact well with other UI frontend code) -if test "$cocoa" = "yes"; then - if test "$sdl" = "yes"; then +if test "$cocoa" = "enabled"; then + if test "$sdl" = "enabled"; then error_exit "Cocoa and SDL UIs cannot both be enabled at once" fi if test "$gtk" = "yes"; then@@ -6622,9 +6622,6 @@ if test "$have_x11" = "yes" && test "$need_x11" = "yes"; then echo "X11_CFLAGS=$x11_cflags" >> $config_host_mak echo "X11_LIBS=$x11_libs" >> $config_host_mak fi -if test "$cocoa" = "yes" ; then - echo "CONFIG_COCOA=y" >> $config_host_mak -fi if test "$iconv" = "yes" ; then echo "CONFIG_ICONV=y" >> $config_host_mak echo "ICONV_CFLAGS=$iconv_cflags" >> $config_host_mak@@ -7937,7 +7934,7 @@ NINJA=${ninja:-$PWD/ninjatool} $meson setup \ -Db_pie=$(if test "$pie" = yes; then echo true; else echo false; fi) \ -Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \ -Dmalloc=$malloc -Dmalloc_trim=$malloc_trim \ - -Dsdl=$sdl -Dsdl_image=$sdl_image \ + -Dcocoa=$cocoa -Dsdl=$sdl -Dsdl_image=$sdl_image \ -Dvnc=$vnc -Dvnc_sasl=$vnc_sasl -Dvnc_jpeg=$vnc_jpeg -Dvnc_png=$vnc_png \ -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f\ $cross_arg \meson.build +8
-2@@ -88,7 +88,7 @@ socket = [] version_res = [] coref = [] iokit = [] -cocoa = [] +cocoa = not_found hvf = [] if targetos == 'windows' socket = cc.find_library('ws2_32')@@ -101,7 +101,7 @@ if targetos == 'windows' elif targetos == 'darwin' coref = dependency('appleframeworks', modules: 'CoreFoundation') iokit = dependency('appleframeworks', modules: 'IOKit') - cocoa = dependency('appleframeworks', modules: 'Cocoa') + cocoa = dependency('appleframeworks', modules: 'Cocoa', required: get_option('cocoa')) hvf = dependency('appleframeworks', modules: 'Hypervisor') elif targetos == 'sunos' socket = [cc.find_library('socket'),@@ -112,6 +112,11 @@ elif targetos == 'haiku' cc.find_library('network'), cc.find_library('bsd')] endif + +if not cocoa.found() and get_option('cocoa').enabled() + error('Cocoa not available on this platform') +endif + # The path to glib.h is added to all compilation commands. This was # grandfathered in from the QEMU Makefiles. add_project_arguments(config_host['GLIB_CFLAGS'].split(),@@ -461,6 +466,7 @@ endif # Create config-host.h +config_host_data.set('CONFIG_COCOA', cocoa.found()) config_host_data.set('CONFIG_SDL', sdl.found()) config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found()) config_host_data.set('CONFIG_VNC', vnc.found())meson_options.txt +2
-0@@ -11,6 +11,8 @@ option('malloc_trim', type : 'feature', value : 'auto', option('malloc', type : 'combo', choices : ['system', 'tcmalloc', 'jemalloc'], value: 'system', description: 'choose memory allocator to use') +option('cocoa', type : 'feature', value : 'auto', + description: 'Cocoa user interface (macOS only)') option('sdl', type : 'feature', value : 'auto', description: 'SDL user interface') option('sdl_image', type : 'feature', value : 'auto',ui/meson.build +1
-1@@ -15,7 +15,7 @@ softmmu_ss.add(files( softmmu_ss.add(when: 'CONFIG_LINUX', if_true: files('input-linux.c')) softmmu_ss.add(when: 'CONFIG_SPICE', if_true: files('spice-core.c', 'spice-input.c', 'spice-display.c')) -softmmu_ss.add(when: [cocoa, 'CONFIG_COCOA'], if_true: files('cocoa.m')) +softmmu_ss.add(when: cocoa, if_true: files('cocoa.m')) vnc_ss = ss.source_set() vnc_ss.add(files(Signature · 1 line
2.26.2
Hi Paolo,
The patch looks good but can't be applied to yesterday's evening master:
Applying: configure: move cocoa option to Meson
error: patch failed: configure:7937
error: configure: patch does not apply
error: patch failed: meson_options.txt:11
error: meson_options.txt: patch does not apply Patch failed at 0001 configure: move cocoa option to Meson
Regards,
Roman