Skip to contentSkip to conversation

arm64: Implement CONFIG_CMDLINE_EXTEND

PATCH Applied Tyler Hicks 4 participants 12 messages Sep 21, 2020 – Nov 27, 2020 arm64

lore
Share & tools
lore
#0 lore raw

cover arm64: Implement CONFIG_CMDLINE_EXTEND

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

This option addresses the following use cases:

1) Switching between stable and development kernel versions, where one of the versions benefits from additional command line parameters, such as debugging options.
2) Specifying additional command line parameters, for additional tuning or debugging, when the bootloader does not offer an interactive mode.

After implementing these patches, I noticed that a previous attempt has been made to upstream CONFIG_CMDLINE_EXTEND support in arm64:

https://lore.kernel.org/linux-arm-kernel/[email protected]/

I don't believe that the previous objection still holds as the generic command line parsing series hasn't been revised in over a year.

This series is based on commit f322010a08da ("Merge branch 'for-next/mte' into for-next/core") of the for-next/core branch of the arm64 tree.

Below is a summary of testing that I performed.

Upgrade testing:

* CONFIG_CMDLINE unset
- oldconfig target doesn't prompt,
* CONFIG_CMDLINE set, CONFIG_CMDLINE_FORCE unset
- oldconfig target prompts for command line type with default choice set to CONFIG_CMDLINE_FROM_BOOTLOADER
* CONFIG_CMDLINE set, CONFIG_CMDLINE_FORCE set
- oldconfig target prompts for command line type with default choice set to CONFIG_CMDLINE_FORCE

Functional testing:

* Set CONFIG_CMDLINE="nokaslr apparmor=0" and CONFIG_CMDLINE_EXTEND=y to test early init parsing and regular parsing
- /proc/cmdline shows that "nokaslr apparmor=0" was appended to the end of the bootloader supplied command line
- "KASLR disabled on command line" found in dmesg
- AppArmor is disabled. /sys/kernel/security/apparmor does not exist and aa-status prints:
apparmor module is loaded.
apparmor filesystem is not mounted.
* Set CONFIG_CMDLINE="nokaslr apparmor=0", CONFIG_CMDLINE_FROM_BOOTLOADER=y, and have the bootloader specify a command line without those options
- The bootloader's command line is used and does not contain CONFIG_CMDLINE's value
- AppArmor and KASLR are enabled
* Set CONFIG_CMDLINE="nokaslr apparmor=0" and CONFIG_CMDLINE_FORCE=y
- The CONFIG_CMDLINE value is used and does not contain the bootloader's command line
- AppArmor and KASLR are disabled

Tyler

Tyler Hicks (2):
arm64: kaslr: Refactor early init command line parsing
arm64: Extend the kernel command line from the bootloader

 arch/arm64/Kconfig        | 23 ++++++++++++++++++++++-
 arch/arm64/kernel/kaslr.c | 26 ++++++++++++++++++--------
 2 files changed, 40 insertions(+), 9 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/2 arm64: kaslr: Refactor early init command line parsing

Don't ask for *the* command line string to search for "nokaslr" in kaslr_early_init(). Instead, tell a helper function to search all the appropriate command line strings for "nokaslr" and return the result.

This paves the way for searching multiple command line strings without having to concatenate the strings in early init.

---
 arch/arm64/kernel/kaslr.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)
arch/arm64/kernel/kaslr.c +11 -8
index b181e0544b79..4c779a67c2a6 100644
@@ -50,10 +50,16 @@ static __init u64 get_kaslr_seed(void *fdt)
 	return ret;
 }
 
-static __init const u8 *kaslr_get_cmdline(void *fdt)
+static __init bool cmdline_contains_nokaslr(const u8 *cmdline)
 {
-	static __initconst const u8 default_cmdline[] = CONFIG_CMDLINE;
+	const u8 *str;
 
+	str = strstr(cmdline, "nokaslr");
+	return str == cmdline || (str > cmdline && *(str - 1) == ' ');
+}
+
+static __init bool is_kaslr_disabled_cmdline(void *fdt)
+{
 	if (!IS_ENABLED(CONFIG_CMDLINE_FORCE)) {
 		int node;
 		const u8 *prop;
@@ -65,10 +71,10 @@ static __init const u8 *kaslr_get_cmdline(void *fdt)
 		prop = fdt_getprop(fdt, node, "bootargs", NULL);
 		if (!prop)
 			goto out;
-		return prop;
+		return cmdline_contains_nokaslr(prop);
 	}
 out:
-	return default_cmdline;
+	return cmdline_contains_nokaslr(CONFIG_CMDLINE);
 }
 
 /*
@@ -83,7 +89,6 @@ u64 __init kaslr_early_init(u64 dt_phys)
 {
 	void *fdt;
 	u64 seed, offset, mask, module_range;
-	const u8 *cmdline, *str;
 	unsigned long raw;
 	int size;
 
@@ -115,9 +120,7 @@ u64 __init kaslr_early_init(u64 dt_phys)
 	 * Check if 'nokaslr' appears on the command line, and
 	 * return 0 if that is the case.
 	 */
-	cmdline = kaslr_get_cmdline(fdt);
-	str = strstr(cmdline, "nokaslr");
-	if (str == cmdline || (str > cmdline && *(str - 1) == ' ')) {
+	if (is_kaslr_disabled_cmdline(fdt)) {
 		kaslr_status = KASLR_DISABLED_CMDLINE;
 		return 0;
 	}
Signature · 1 line
2.25.1
#2 lore raw

PATCH 2/2 arm64: Extend the kernel command line from the bootloader

In reply to Tyler Hicks

Provide support for additional kernel command line parameters to be concatenated onto the end of the command line provided by the bootloader. Additional parameters are specified in the CONFIG_CMDLINE option when CONFIG_CMDLINE_EXTEND is selected, matching other architectures and leveraging existing support in the FDT and EFI stub code.

Special care must be taken for the arch-specific nokaslr parsing. Search the bootargs FDT property and the CONFIG_CMDLINE when CONFIG_CMDLINE_EXTEND is in use.

There are a couple of known use cases for this feature:

1) Switching between stable and development kernel versions, where one of the versions benefits from additional command line parameters, such as debugging options.
2) Specifying additional command line parameters, for additional tuning or debugging, when the bootloader does not offer an interactive mode.

---
 arch/arm64/Kconfig        | 23 ++++++++++++++++++++++-
 arch/arm64/kernel/kaslr.c |  9 ++++++++-
 2 files changed, 30 insertions(+), 2 deletions(-)
arch/arm64/Kconfig +22 -1
index e5eb6a69b1e3..466df3415fff 100644
@@ -1864,15 +1864,36 @@ config CMDLINE
 	  entering them here. As a minimum, you should specify the the
 	  root device (e.g. root=/dev/nfs).
 
+choice
+	prompt "Kernel command line type" if CMDLINE != ""
+	default CMDLINE_FROM_BOOTLOADER
+	help
+	  Choose how the kernel will handle the provided default kernel
+	  command line string.
+
+config CMDLINE_FROM_BOOTLOADER
+	bool "Use bootloader kernel arguments if available"
+	help
+	  Uses the command-line options passed by the boot loader. If
+	  the boot loader doesn't provide any, the default kernel command
+	  string provided in CMDLINE will be used.
+
+config CMDLINE_EXTEND
+	bool "Extend bootloader kernel arguments"
+	help
+	  The command-line arguments provided by the boot loader will be
+	  appended to the default kernel command string.
+
 config CMDLINE_FORCE
 	bool "Always use the default kernel command string"
-	depends on CMDLINE != ""
 	help
 	  Always use the default kernel command string, even if the boot
 	  loader passes other arguments to the kernel.
 	  This is useful if you cannot or don't want to change the
 	  command-line options your boot loader passes to the kernel.
 
+endchoice
+
 config EFI_STUB
 	bool
 
arch/arm64/kernel/kaslr.c +8 -1
index 4c779a67c2a6..0921aa1520b0 100644
@@ -71,7 +71,14 @@ static __init bool is_kaslr_disabled_cmdline(void *fdt)
 		prop = fdt_getprop(fdt, node, "bootargs", NULL);
 		if (!prop)
 			goto out;
-		return cmdline_contains_nokaslr(prop);
+
+		if (cmdline_contains_nokaslr(prop))
+			return true;
+
+		if (IS_ENABLED(CONFIG_CMDLINE_EXTEND))
+			goto out;
+
+		return false;
 	}
 out:
 	return cmdline_contains_nokaslr(CONFIG_CMDLINE);
Signature · 1 line
2.25.1
#3 lore raw
In reply to Tyler Hicks
Quoted 4 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

Hi Catalin and Will - Friendly ping on this series now that we're on the other side of the 5.10 merge window. I hope it can be considered for 5.10+1. Let me know if I need to rebase/resubmit. Thanks!

Tyler

maintainer
#4 lore raw
Quoted 9 lines · Tyler Hicks
Quoted 4 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

Hi Catalin and Will - Friendly ping on this series now that we're on the other side of the 5.10 merge window. I hope it can be considered for 5.10+1. Let me know if I need to rebase/resubmit. Thanks!

Can you use bootconfig to achieve what you need?

Will

#5 lore raw
Quoted 7 lines · Will Deacon
Quoted 6 lines · Tyler Hicks
Quoted 4 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

Quoted 5 lines
Quoted 3 lines

Hi Catalin and Will - Friendly ping on this series now that we're on the other side of the 5.10 merge window. I hope it can be considered for 5.10+1. Let me know if I need to rebase/resubmit. Thanks!

Can you use bootconfig to achieve what you need?

Thanks for mentioning bootconfig. I hadn't considered it.

After reading the docs and code, I see a few reasons why I can't use it out of the box:

1) It requires "bootconfig" to be appended to the kernel command line. My proposed patch series makes it possible to append new options to the kernel command line in situations where the bootloader is not interactive. This presents a circular dependency problem for my use case.

A new config option could be added to force the enablement of bootconfig but that would sort of be a single-use duplicate of CONFIG_CMDLINE_EXTEND's functionality.

2) Not all kernel command line options can be configured using bootconfig. For example, the "nokaslr" and "crashkernel=" parameters are parsed/handled before setup_boot_config() is called. KASLR can be disabled via a kernel config change but there's no config option equivalent for "crashkernel=". Changing the "crashkernel=" command line option is something that I need to support because a development/debug kernel build often requires a larger reservation and we find ourselves adjusting the "crashkernel=" value fairly often.

3) External FIT image build systems do not yet support bootconfig since it is so new. It is completely fair if you file this away in your not-my-problem folder but simple kernel config modifications, as needed for CONFIG_CMDLINE_EXTEND, are something that every image build system is likely to support today.

All that said, I do really like the look of bootconfig. Unfortunately, it doesn't let me achieve everything I need.

Tyler

Quoted 3 lines

Will

maintainer
#6 lore raw
Quoted 39 lines · Tyler Hicks
Quoted 7 lines · Will Deacon
Quoted 6 lines · Tyler Hicks
Quoted 4 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

Quoted 5 lines
Quoted 3 lines

Hi Catalin and Will - Friendly ping on this series now that we're on the other side of the 5.10 merge window. I hope it can be considered for 5.10+1. Let me know if I need to rebase/resubmit. Thanks!

Can you use bootconfig to achieve what you need?

Thanks for mentioning bootconfig. I hadn't considered it.

After reading the docs and code, I see a few reasons why I can't use it out of the box:

1) It requires "bootconfig" to be appended to the kernel command line. My proposed patch series makes it possible to append new options to the kernel command line in situations where the bootloader is not interactive. This presents a circular dependency problem for my use case.

A new config option could be added to force the enablement of bootconfig but that would sort of be a single-use duplicate of CONFIG_CMDLINE_EXTEND's functionality.

2) Not all kernel command line options can be configured using bootconfig. For example, the "nokaslr" and "crashkernel=" parameters are parsed/handled before setup_boot_config() is called. KASLR can be disabled via a kernel config change but there's no config option equivalent for "crashkernel=". Changing the "crashkernel=" command line option is something that I need to support because a development/debug kernel build often requires a larger reservation and we find ourselves adjusting the "crashkernel=" value fairly often.

Quoted 8 lines

3) External FIT image build systems do not yet support bootconfig since it is so new. It is completely fair if you file this away in your not-my-problem folder but simple kernel config modifications, as needed for CONFIG_CMDLINE_EXTEND, are something that every image build system is likely to support today.

All that said, I do really like the look of bootconfig. Unfortunately, it doesn't let me achieve everything I need.

Ok, well thanks for having a look. A follow-up question I have is how is this handled on x86? They don't appear to have CONFIG_CMDLINE_EXTEND either afaict. Is it because their bootloader story tends to be more uniform?

Will

#7 lore raw
Quoted 46 lines · Will Deacon
Quoted 45 lines · Tyler Hicks
Quoted 7 lines · Will Deacon
Quoted 6 lines · Tyler Hicks
Quoted 4 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

Quoted 5 lines
Quoted 3 lines

Hi Catalin and Will - Friendly ping on this series now that we're on the other side of the 5.10 merge window. I hope it can be considered for 5.10+1. Let me know if I need to rebase/resubmit. Thanks!

Can you use bootconfig to achieve what you need?

Thanks for mentioning bootconfig. I hadn't considered it.

After reading the docs and code, I see a few reasons why I can't use it out of the box:

1) It requires "bootconfig" to be appended to the kernel command line. My proposed patch series makes it possible to append new options to the kernel command line in situations where the bootloader is not interactive. This presents a circular dependency problem for my use case.

A new config option could be added to force the enablement of bootconfig but that would sort of be a single-use duplicate of CONFIG_CMDLINE_EXTEND's functionality.

2) Not all kernel command line options can be configured using bootconfig. For example, the "nokaslr" and "crashkernel=" parameters are parsed/handled before setup_boot_config() is called. KASLR can be disabled via a kernel config change but there's no config option equivalent for "crashkernel=". Changing the "crashkernel=" command line option is something that I need to support because a development/debug kernel build often requires a larger reservation and we find ourselves adjusting the "crashkernel=" value fairly often.

3) External FIT image build systems do not yet support bootconfig since it is so new. It is completely fair if you file this away in your not-my-problem folder but simple kernel config modifications, as needed for CONFIG_CMDLINE_EXTEND, are something that every image build system is likely to support today.

Quoted 6 lines
Quoted 2 lines

All that said, I do really like the look of bootconfig. Unfortunately, it doesn't let me achieve everything I need.

Ok, well thanks for having a look. A follow-up question I have is how is this handled on x86? They don't appear to have CONFIG_CMDLINE_EXTEND either afaict. Is it because their bootloader story tends to be more uniform?

x86's equivalent was implemented by commit 516cbf3730c4 ("x86, bootup:
add built-in kernel command line for x86 (v2)"). To summarize, you have to enable CONFIG_CMDLINE_BOOL and then that lets you define built-in command line parameters in CONFIG_CMDLINE. However, it is backwards in that the command line provided by the bootloader is appended onto the end of CONFIG_CMDLINE.

This doesn't seem as useful to me because, using the crashkernel= example from above, the bootloader provided crashkernel= value may need to be overridden by the built-in command line to provide a different crashkernel= value for the particular kernel build being booted. Most kernel command line parameter parsers are implemented in a way that supports multiple instances of the parameter while only honoring the last instance.

Tyler

Quoted 3 lines

Will

#8 lore raw
Quoted 61 lines · Tyler Hicks
Quoted 46 lines · Will Deacon
Quoted 45 lines · Tyler Hicks
Quoted 7 lines · Will Deacon
Quoted 6 lines · Tyler Hicks
Quoted 4 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

Quoted 5 lines
Quoted 3 lines

Hi Catalin and Will - Friendly ping on this series now that we're on the other side of the 5.10 merge window. I hope it can be considered for 5.10+1. Let me know if I need to rebase/resubmit. Thanks!

Can you use bootconfig to achieve what you need?

Thanks for mentioning bootconfig. I hadn't considered it.

After reading the docs and code, I see a few reasons why I can't use it out of the box:

1) It requires "bootconfig" to be appended to the kernel command line. My proposed patch series makes it possible to append new options to the kernel command line in situations where the bootloader is not interactive. This presents a circular dependency problem for my use case.

A new config option could be added to force the enablement of bootconfig but that would sort of be a single-use duplicate of CONFIG_CMDLINE_EXTEND's functionality.

2) Not all kernel command line options can be configured using bootconfig. For example, the "nokaslr" and "crashkernel=" parameters are parsed/handled before setup_boot_config() is called. KASLR can be disabled via a kernel config change but there's no config option equivalent for "crashkernel=". Changing the "crashkernel=" command line option is something that I need to support because a development/debug kernel build often requires a larger reservation and we find ourselves adjusting the "crashkernel=" value fairly often.

3) External FIT image build systems do not yet support bootconfig since it is so new. It is completely fair if you file this away in your not-my-problem folder but simple kernel config modifications, as needed for CONFIG_CMDLINE_EXTEND, are something that every image build system is likely to support today.

Quoted 6 lines
Quoted 2 lines

All that said, I do really like the look of bootconfig. Unfortunately, it doesn't let me achieve everything I need.

Ok, well thanks for having a look. A follow-up question I have is how is this handled on x86? They don't appear to have CONFIG_CMDLINE_EXTEND either afaict. Is it because their bootloader story tends to be more uniform?

x86's equivalent was implemented by commit 516cbf3730c4 ("x86, bootup:
add built-in kernel command line for x86 (v2)"). To summarize, you have to enable CONFIG_CMDLINE_BOOL and then that lets you define built-in command line parameters in CONFIG_CMDLINE. However, it is backwards in that the command line provided by the bootloader is appended onto the end of CONFIG_CMDLINE.

Quoted 7 lines

This doesn't seem as useful to me because, using the crashkernel= example from above, the bootloader provided crashkernel= value may need to be overridden by the built-in command line to provide a different crashkernel= value for the particular kernel build being booted. Most kernel command line parameter parsers are implemented in a way that supports multiple instances of the parameter while only honoring the last instance.

Hey Will - Do you any additional concerns that I should look into?

Thanks!

Tyler

Quoted 6 lines

Tyler

Quoted 3 lines

Will

maintainer
#9 lore raw
Quoted 70 lines · Tyler Hicks
Quoted 61 lines · Tyler Hicks
Quoted 46 lines · Will Deacon
Quoted 45 lines · Tyler Hicks
Quoted 7 lines · Will Deacon
Quoted 6 lines · Tyler Hicks
Quoted 4 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

Quoted 5 lines
Quoted 3 lines

Hi Catalin and Will - Friendly ping on this series now that we're on the other side of the 5.10 merge window. I hope it can be considered for 5.10+1. Let me know if I need to rebase/resubmit. Thanks!

Can you use bootconfig to achieve what you need?

Thanks for mentioning bootconfig. I hadn't considered it.

After reading the docs and code, I see a few reasons why I can't use it out of the box:

1) It requires "bootconfig" to be appended to the kernel command line. My proposed patch series makes it possible to append new options to the kernel command line in situations where the bootloader is not interactive. This presents a circular dependency problem for my use case.

A new config option could be added to force the enablement of bootconfig but that would sort of be a single-use duplicate of CONFIG_CMDLINE_EXTEND's functionality.

2) Not all kernel command line options can be configured using bootconfig. For example, the "nokaslr" and "crashkernel=" parameters are parsed/handled before setup_boot_config() is called. KASLR can be disabled via a kernel config change but there's no config option equivalent for "crashkernel=". Changing the "crashkernel=" command line option is something that I need to support because a development/debug kernel build often requires a larger reservation and we find ourselves adjusting the "crashkernel=" value fairly often.

3) External FIT image build systems do not yet support bootconfig since it is so new. It is completely fair if you file this away in your not-my-problem folder but simple kernel config modifications, as needed for CONFIG_CMDLINE_EXTEND, are something that every image build system is likely to support today.

Quoted 6 lines
Quoted 2 lines

All that said, I do really like the look of bootconfig. Unfortunately, it doesn't let me achieve everything I need.

Ok, well thanks for having a look. A follow-up question I have is how is this handled on x86? They don't appear to have CONFIG_CMDLINE_EXTEND either afaict. Is it because their bootloader story tends to be more uniform?

x86's equivalent was implemented by commit 516cbf3730c4 ("x86, bootup:
add built-in kernel command line for x86 (v2)"). To summarize, you have to enable CONFIG_CMDLINE_BOOL and then that lets you define built-in command line parameters in CONFIG_CMDLINE. However, it is backwards in that the command line provided by the bootloader is appended onto the end of CONFIG_CMDLINE.

Quoted 7 lines

This doesn't seem as useful to me because, using the crashkernel= example from above, the bootloader provided crashkernel= value may need to be overridden by the built-in command line to provide a different crashkernel= value for the particular kernel build being booted. Most kernel command line parameter parsers are implemented in a way that supports multiple instances of the parameter while only honoring the last instance.

Quoted 1 line

Hey Will - Do you any additional concerns that I should look into?

No, you convinced me it's useful. I just haven't found time to look at the implementation yet!

Will

#10 lore raw
In reply to Tyler Hicks
Quoted 62 lines · Tyler Hicks
Quoted 46 lines · Will Deacon
Quoted 45 lines · Tyler Hicks
Quoted 7 lines · Will Deacon
Quoted 6 lines · Tyler Hicks
Quoted 4 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

Quoted 5 lines
Quoted 3 lines

Hi Catalin and Will - Friendly ping on this series now that we're on the other side of the 5.10 merge window. I hope it can be considered for 5.10+1. Let me know if I need to rebase/resubmit. Thanks!

Can you use bootconfig to achieve what you need?

Thanks for mentioning bootconfig. I hadn't considered it.

After reading the docs and code, I see a few reasons why I can't use it out of the box:

1) It requires "bootconfig" to be appended to the kernel command line. My proposed patch series makes it possible to append new options to the kernel command line in situations where the bootloader is not interactive. This presents a circular dependency problem for my use case.

A new config option could be added to force the enablement of bootconfig but that would sort of be a single-use duplicate of CONFIG_CMDLINE_EXTEND's functionality.

2) Not all kernel command line options can be configured using bootconfig. For example, the "nokaslr" and "crashkernel=" parameters are parsed/handled before setup_boot_config() is called. KASLR can be disabled via a kernel config change but there's no config option equivalent for "crashkernel=". Changing the "crashkernel=" command line option is something that I need to support because a development/debug kernel build often requires a larger reservation and we find ourselves adjusting the "crashkernel=" value fairly often.

3) External FIT image build systems do not yet support bootconfig since it is so new. It is completely fair if you file this away in your not-my-problem folder but simple kernel config modifications, as needed for CONFIG_CMDLINE_EXTEND, are something that every image build system is likely to support today.

Quoted 6 lines
Quoted 2 lines

All that said, I do really like the look of bootconfig. Unfortunately, it doesn't let me achieve everything I need.

Ok, well thanks for having a look. A follow-up question I have is how is this handled on x86? They don't appear to have CONFIG_CMDLINE_EXTEND either afaict. Is it because their bootloader story tends to be more uniform?

x86's equivalent was implemented by commit 516cbf3730c4 ("x86, bootup:
add built-in kernel command line for x86 (v2)"). To summarize, you have to enable CONFIG_CMDLINE_BOOL and then that lets you define built-in command line parameters in CONFIG_CMDLINE. However, it is backwards in that the command line provided by the bootloader is appended onto the end of CONFIG_CMDLINE.

Quoted 7 lines

This doesn't seem as useful to me because, using the crashkernel= example from above, the bootloader provided crashkernel= value may need to be overridden by the built-in command line to provide a different crashkernel= value for the particular kernel build being booted. Most kernel command line parameter parsers are implemented in a way that supports multiple instances of the parameter while only honoring the last instance.

These config options should be common IMO. It's a minefield though. You might want to look at this prior attempt[1].

Rob

[1] https://lore.kernel.org/lkml/[email protected]/

maintainer Applied
#11 lore raw
In reply to Tyler Hicks
Quoted 8 lines · Tyler Hicks

Provide the CONFIG_CMDLINE_EXTEND config option for arm64 kernels. This config option can be used to extend the kernel command line parameters, specified by the bootloader, with additional command line parameters specified in the kernel configuration.

This option addresses the following use cases:

[...]

Applied to arm64 (for-next/cmdline-extended), thanks!

[1/2] arm64: kaslr: Refactor early init command line parsing

      https://git.kernel.org/arm64/c/52ec03f75d59
[2/2] arm64: Extend the kernel command line from the bootloader
      https://git.kernel.org/arm64/c/1e40d105dae5
Signature · 7 lines
Catalin


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel