usb: dwc2: Fix contorl OUT transfer issue
PATCH 1/1 usb: dwc2: Fix contorl OUT transfer issue
In buffer DMA mode, gadget should re-configure EP 0 to received SETUP packets when doeptsiz.xfersize is equal to a setup packet size(8 bytes) and EP 0 is in WAIT_FOR_SETUP state.
Since EP 0 is not enabled in WAIT_FOR_SETUP state, SETUP packets is NOT received from RxFifo and wriiten to the external memory.
Signed-off-by Chance.Yang <[email protected]>
---
drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c +13 -3
@@ -421,6 +421,9 @@ static void process_ep_out_intr(struct dwc2_udc *dev) {u32 ep_intr, ep_intr_status;u8 ep_num =0 ; +u32 ep_tsr =0 , xfer_size =0 ; +u32 epsiz_reg = (u32)®->out_endp[ep_num].doeptsiz; +u32 req_size =sizeof (struct usb_ctrlrequest ); ep_intr =readl (®->daint); debug_cond(DEBUG_OUT_EP != 0,
@@ -441,10 +444,17 @@ static void process_ep_out_intr(struct dwc2_udc *dev)if (ep_num ==0 ) {if (ep_intr_status &TRANSFER_DONE ) { -if (dev->ep0state != -WAIT_FOR_OUT_COMPLETE ) + ep_tsr =readl (epsiz_reg); + xfer_size = (ep_tsr & +DOEPT_SIZ_XFER_SIZE_MAX_EP0 ); + +if (xfer_size == req_size && + dev->ep0state ==WAIT_FOR_SETUP ) { +dwc2_udc_pre_setup (); + }else if (dev->ep0state != +WAIT_FOR_OUT_COMPLETE ) {complete_rx (dev, ep_num); -else { + }else { dev->ep0state =WAIT_FOR_SETUP ;dwc2_udc_pre_setup (); }
Signature · 1 line
2.17.1
Marek Vasut
AppliedPATCH 1/1 usb: dwc2: Fix contorl OUT transfer issue
Quoted 6 lines · Chance.Yang
In buffer DMA mode, gadget should re-configure EP 0 to received SETUP packets when doeptsiz.xfersize is equal to a setup packet size(8 bytes) and EP 0 is in
WAIT_FOR_SETUPstate.Since EP 0 is not enabled in
WAIT_FOR_SETUPstate, SETUP packets is NOT received from RxFifo and wriiten to the external memory.
Applied to usb/next, thanks