mt76: mt7915: add offchannel condition in switch channel command
Subsystems (2)
Shayne Chen
reviewerPATCH 1/1 mt76: mt7915: add offchannel condition in switch channel command
Add a missing offchannel condition for channel switch reason, which bypasses DPD calibration to reduce scanning time.
Signed-off-by Shayne Chen <[email protected]>
--- drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c +4 -2
@@ -3212,8 +3212,10 @@ int mt7915_mcu_set_chan_info(struct mt7915_phy *phy, int cmd) .channel_band = chandef->chan->band, }; -if ((chandef->chan->flags &IEEE80211_CHAN_RADAR ) && - chandef->chan->dfs_state !=NL80211_DFS_AVAILABLE ) +if (dev->mt76.hw->conf.flags &IEEE80211_CONF_OFFCHANNEL ) + req.switch_reason =CH_SWITCH_SCAN_BYPASS_DPD ; +else if ((chandef->chan->flags &IEEE80211_CHAN_RADAR ) && + chandef->chan->dfs_state !=NL80211_DFS_AVAILABLE ) req.switch_reason =CH_SWITCH_DFS ;else req.switch_reason =CH_SWITCH_NORMAL ;
Signature · 1 line
2.17.1