Skip to contentSkip to conversation

drm/ast: Reload gamma LUT after changing primary plane's color format

PATCH In review Thomas Zimmermann 2 participants 3 messages Sep 22, 2020 – Sep 24, 2020

Subsystems (3)
lore
Share & tools
lore

Thomas Zimmermann

author maintainer
#0 lore raw

PATCH 1/1 drm/ast: Reload gamma LUT after changing primary plane's color format

The gamma LUT has to be reloaded after changing the primary plane's color format. This used to be done implicitly by the CRTC atomic_enable() helper after updating the primary plane. With the recent reordering of the steps, the primary plane's setup was moved last and invalidated the gamma LUT. Fix this by setting the LUT from within atomic_flush().

Fixes 2f0ddd89fe32 ("drm/ast: Enable CRTC before planes")
Cc Thomas Zimmermann <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Dave Airlie <[email protected]>
---
 drivers/gpu/drm/ast/ast_mode.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/ast/ast_mode.c +12 -1
index 834a156e3a75..ba3bf76e104d 100644
@@ -742,7 +742,6 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
 	case DRM_MODE_DPMS_SUSPEND:
 		if (ast->tx_chip_type == AST_TX_DP501)
 			ast_set_dp501_video_output(crtc->dev, 1);
-		ast_crtc_load_lut(ast, crtc);
 		break;
 	case DRM_MODE_DPMS_OFF:
 		if (ast->tx_chip_type == AST_TX_DP501)
@@ -777,6 +776,17 @@ static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,
 	return 0;
 }
 
+static void
+ast_crtc_helper_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state)
+{
+	struct ast_private *ast = to_ast_private(crtc->dev);
+	struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc->state);
+	struct ast_crtc_state *old_ast_crtc_state = to_ast_crtc_state(old_crtc_state);
+
+	if (old_ast_crtc_state->format != ast_crtc_state->format)
+		ast_crtc_load_lut(ast, crtc);
+}
+
 static void
 ast_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 			      struct drm_crtc_state *old_crtc_state)
@@ -830,6 +840,7 @@ ast_crtc_helper_atomic_disable(struct drm_crtc *crtc,
 
 static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = {
 	.atomic_check = ast_crtc_helper_atomic_check,
+	.atomic_flush = ast_crtc_helper_atomic_flush,
 	.atomic_enable = ast_crtc_helper_atomic_enable,
 	.atomic_disable = ast_crtc_helper_atomic_disable,
 };
Signature · 6 lines
2.28.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw
Quoted 6 lines · Thomas Zimmermann

The gamma LUT has to be reloaded after changing the primary plane's color format. This used to be done implicitly by the CRTC atomic_enable() helper after updating the primary plane. With the recent reordering of the steps, the primary plane's setup was moved last and invalidated the gamma LUT. Fix this by setting the LUT from within atomic_flush().

Quoted 6 lines
Fixes 2f0ddd89fe32 ("drm/ast: Enable CRTC before planes")
Cc Thomas Zimmermann <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Dave Airlie <[email protected]>

Does what it says in the commit message, and makes sense.

Maybe add a comment to the load_lut function or where it's called stating that this must be done after every plane color change, seems like an important piece of information to carry around in the code itself and not just in the commit message.

Either way: Reviewed-by: Daniel Vetter <[email protected]>

Quoted 45 lines
---
 drivers/gpu/drm/ast/ast_mode.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/ast/ast_mode.c +12 -1
index 834a156e3a75..ba3bf76e104d 100644
@@ -742,7 +742,6 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
 	case DRM_MODE_DPMS_SUSPEND:
 		if (ast->tx_chip_type == AST_TX_DP501)
 			ast_set_dp501_video_output(crtc->dev, 1);
-		ast_crtc_load_lut(ast, crtc);
 		break;
 	case DRM_MODE_DPMS_OFF:
 		if (ast->tx_chip_type == AST_TX_DP501)
@@ -777,6 +776,17 @@ static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,
 	return 0;
 }
 
+static void
+ast_crtc_helper_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state)
+{
+	struct ast_private *ast = to_ast_private(crtc->dev);
+	struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc->state);
+	struct ast_crtc_state *old_ast_crtc_state = to_ast_crtc_state(old_crtc_state);
+
+	if (old_ast_crtc_state->format != ast_crtc_state->format)
+		ast_crtc_load_lut(ast, crtc);
+}
+
 static void
 ast_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 			      struct drm_crtc_state *old_crtc_state)
@@ -830,6 +840,7 @@ ast_crtc_helper_atomic_disable(struct drm_crtc *crtc,
 
 static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = {
 	.atomic_check = ast_crtc_helper_atomic_check,
+	.atomic_flush = ast_crtc_helper_atomic_flush,
 	.atomic_enable = ast_crtc_helper_atomic_enable,
 	.atomic_disable = ast_crtc_helper_atomic_disable,
 };
Signature · 1 line
2.28.0
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
author maintainer
#2 lore raw

Hi

Am 23.09.20 um 17:30 schrieb Daniel Vetter:

Quoted 14 lines · Thomas Zimmermann
Quoted 6 lines

The gamma LUT has to be reloaded after changing the primary plane's color format. This used to be done implicitly by the CRTC atomic_enable() helper after updating the primary plane. With the recent reordering of the steps, the primary plane's setup was moved last and invalidated the gamma LUT. Fix this by setting the LUT from within atomic_flush().

Quoted 6 lines
Fixes 2f0ddd89fe32 ("drm/ast: Enable CRTC before planes")
Cc Thomas Zimmermann <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Dave Airlie <[email protected]>
Quoted 6 lines

Does what it says in the commit message, and makes sense.

Maybe add a comment to the load_lut function or where it's called stating that this must be done after every plane color change, seems like an important piece of information to carry around in the code itself and not just in the commit message.

I'll do that before committing the patch.

Quoted 2 lines

Either way: Reviewed-by: Daniel Vetter <[email protected]>

Thanks

Best regards
Thomas

Quoted 47 lines
Quoted 46 lines
---
 drivers/gpu/drm/ast/ast_mode.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
drivers/gpu/drm/ast/ast_mode.c +12 -1
index 834a156e3a75..ba3bf76e104d 100644
@@ -742,7 +742,6 @@ static void ast_crtc_dpms(struct drm_crtc *crtc, int mode)
 	case DRM_MODE_DPMS_SUSPEND:
 		if (ast->tx_chip_type == AST_TX_DP501)
 			ast_set_dp501_video_output(crtc->dev, 1);
-		ast_crtc_load_lut(ast, crtc);
 		break;
 	case DRM_MODE_DPMS_OFF:
 		if (ast->tx_chip_type == AST_TX_DP501)
@@ -777,6 +776,17 @@ static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc,
 	return 0;
 }
 
+static void
+ast_crtc_helper_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state)
+{
+	struct ast_private *ast = to_ast_private(crtc->dev);
+	struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc->state);
+	struct ast_crtc_state *old_ast_crtc_state = to_ast_crtc_state(old_crtc_state);
+
+	if (old_ast_crtc_state->format != ast_crtc_state->format)
+		ast_crtc_load_lut(ast, crtc);
+}
+
 static void
 ast_crtc_helper_atomic_enable(struct drm_crtc *crtc,
 			      struct drm_crtc_state *old_crtc_state)
@@ -830,6 +840,7 @@ ast_crtc_helper_atomic_disable(struct drm_crtc *crtc,
 
 static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = {
 	.atomic_check = ast_crtc_helper_atomic_check,
+	.atomic_flush = ast_crtc_helper_atomic_flush,
 	.atomic_enable = ast_crtc_helper_atomic_enable,
 	.atomic_disable = ast_crtc_helper_atomic_disable,
 };
Signature · 1 line
2.28.0
Signature · 6 lines
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel