timer drivers for v5.10
Subsystems (2)
The following changes since commit ec02821c1d35f93b821bc9fdfa83a5f3e9d7275d:
alarmtimer: Convert comma to semicolon (2020-08-25 12:45:53 +0200)
are available in the Git repository at:
https://[email protected]/people/daniel.lezcano/linux.git
tags/timers-v5.10
for you to fetch changes up to 549437a43f45ce70cf5012317633c635c43ba4f4:
clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode
(2020-09-24 10:51:04 +0200)
----------------------------------------------------------------
- Add DT binding documentation to support the r8a7742 and r8a774e1 platforms (Lad Prabhakar)
- Add sp804 variant support for the Hisilicon platforms (Kefeng Wang)
----------------------------------------------------------------
Kefeng Wang (1):
clocksource/drivers/sp804: Cleanup clk_get_sys()
Lad Prabhakar (2):
dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support
dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
Zhen Lei (7):
clocksource/drivers/sp804: Remove unused sp804_timer_disable() andtimer-sp804.h
clocksource/drivers/sp804: Delete the leading "__" of some functions clocksource/drivers/sp804: Remove a mismatched comment clocksource/drivers/sp804: Prepare for support non-standard
register offset
clocksource/drivers/sp804: Support non-standard register offset clocksource/drivers/sp804: Add support for Hisilicon sp804 timer clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode
.../devicetree/bindings/timer/renesas,cmt.yaml | 4 + drivers/clocksource/timer-sp.h | 32 ++++ drivers/clocksource/timer-sp804.c | 210 ++++++++++++++------- include/clocksource/timer-sp804.h | 29 --- 4 files changed, 183 insertions(+), 92 deletions(-) delete mode 100644 include/clocksource/timer-sp804.h
Signature · 5 lines
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH 1/10 dt-bindings: timer: renesas,cmt: Document r8a7742 CMT support
From: Lad Prabhakar <[email protected]>
Document SoC specific compatible strings for r8a7742. No driver change is needed as the fallback strings will activate the right code.
--- Documentation/devicetree/bindings/timer/renesas,cmt.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/timer/renesas,cmt.yaml +2 -0
@@ -39,6 +39,7 @@ properties: - items: - enum: - renesas,r8a73a4-cmt0 # 32-bit CMT0 on R-Mobile APE6 + - renesas,r8a7742-cmt0 # 32-bit CMT0 on RZ/G1H - renesas,r8a7743-cmt0 # 32-bit CMT0 on RZ/G1M - renesas,r8a7744-cmt0 # 32-bit CMT0 on RZ/G1N - renesas,r8a7745-cmt0 # 32-bit CMT0 on RZ/G1E
@@ -53,6 +54,7 @@ properties: - items: - enum: - renesas,r8a73a4-cmt1 # 48-bit CMT1 on R-Mobile APE6 + - renesas,r8a7742-cmt1 # 48-bit CMT1 on RZ/G1H - renesas,r8a7743-cmt1 # 48-bit CMT1 on RZ/G1M - renesas,r8a7744-cmt1 # 48-bit CMT1 on RZ/G1N - renesas,r8a7745-cmt1 # 48-bit CMT1 on RZ/G1E
Signature · 1 line
2.25.1
PATCH 2/10 dt-bindings: timer: renesas,cmt: Document r8a774e1 CMT support
From: Lad Prabhakar <[email protected]>
Document SoC specific bindings for RZ/G2H (r8a774e1) SoC.
--- Documentation/devicetree/bindings/timer/renesas,cmt.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/timer/renesas,cmt.yaml +2 -0
@@ -71,6 +71,7 @@ properties: - renesas,r8a774a1-cmt0 # 32-bit CMT0 on RZ/G2M - renesas,r8a774b1-cmt0 # 32-bit CMT0 on RZ/G2N - renesas,r8a774c0-cmt0 # 32-bit CMT0 on RZ/G2E + - renesas,r8a774e1-cmt0 # 32-bit CMT0 on RZ/G2H - renesas,r8a7795-cmt0 # 32-bit CMT0 on R-Car H3 - renesas,r8a7796-cmt0 # 32-bit CMT0 on R-Car M3-W - renesas,r8a77965-cmt0 # 32-bit CMT0 on R-Car M3-N
@@ -85,6 +86,7 @@ properties: - renesas,r8a774a1-cmt1 # 48-bit CMT on RZ/G2M - renesas,r8a774b1-cmt1 # 48-bit CMT on RZ/G2N - renesas,r8a774c0-cmt1 # 48-bit CMT on RZ/G2E + - renesas,r8a774e1-cmt1 # 48-bit CMT on RZ/G2H - renesas,r8a7795-cmt1 # 48-bit CMT on R-Car H3 - renesas,r8a7796-cmt1 # 48-bit CMT on R-Car M3-W - renesas,r8a77965-cmt1 # 48-bit CMT on R-Car M3-N
Signature · 1 line
2.25.1
PATCH 3/10 clocksource/drivers/sp804: Cleanup clk_get_sys()
In reply to Daniel LezcanoFrom: Kefeng Wang <[email protected]>
Move the clk_get_sys() part into sp804_get_clock_rate(), cleanup the same code.
--- drivers/clocksource/timer-sp804.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-)
drivers/clocksource/timer-sp804.c +10 -20
@@ -22,11 +22,18 @@#include "timer-sp.h" -static long __init sp804_get_clock_rate (struct clk *clk) +static long __init sp804_get_clock_rate (struct clk *clk,const char *name) {long rate;int err; +if (!clk) + clk =clk_get_sys ("sp804" , name); +if (IS_ERR (clk)) { +pr_err ("sp804: %s clock not found: %ld\n" , name,PTR_ERR (clk)); +return PTR_ERR (clk); + } + err =clk_prepare (clk);if (err) {pr_err ("sp804: clock failed to prepare: %d\n" , err);
@@ -72,16 +79,7 @@ int __init __sp804_clocksource_and_sched_clock_init(void __iomem *base, {long rate; -if (!clk) { - clk =clk_get_sys ("sp804" , name); -if (IS_ERR (clk)) { -pr_err ("sp804: clock not found: %d\n" , - (int )PTR_ERR (clk)); -return PTR_ERR (clk); - } - } - - rate =sp804_get_clock_rate (clk); + rate =sp804_get_clock_rate (clk, name);if (rate <0 )return -EINVAL ;
@@ -173,15 +171,7 @@ int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, structstruct clock_event_device *evt = &sp804_clockevent;long rate; -if (!clk) - clk =clk_get_sys ("sp804" , name); -if (IS_ERR (clk)) { -pr_err ("sp804: %s clock not found: %d\n" , name, - (int )PTR_ERR (clk)); -return PTR_ERR (clk); - } - - rate =sp804_get_clock_rate (clk); + rate =sp804_get_clock_rate (clk, name);if (rate <0 )return -EINVAL ;
Signature · 1 line
2.25.1
PATCH 4/10 clocksource/drivers/sp804: Remove unused sp804_timer_disable() and timer-sp804.h
In reply to Daniel LezcanoFrom: Zhen Lei <[email protected]>
Since commit 7484c727b636 ("ARM: realview: delete the RealView board files") and commit 16956fed35fe ("ARM: versatile: switch to DT only booting and remove legacy code"), there's no one to use the functions defined or declared in include/clocksource/timer-sp804.h. Delete it.
--- drivers/clocksource/timer-sp804.c | 7 ------- include/clocksource/timer-sp804.h | 29 ----------------------------- 2 files changed, 36 deletions(-) delete mode 100644 include/clocksource/timer-sp804.h
drivers/clocksource/timer-sp804.c +0 -7
@@ -18,8 +18,6 @@#include <linux/of_irq.h> #include <linux/sched_clock.h> -#include <clocksource/timer-sp804.h> -#include "timer-sp.h" static long __init sp804_get_clock_rate (struct clk *clk,const char *name)
@@ -67,11 +65,6 @@ static u64 notrace sp804_read(void)return ~readl_relaxed (sched_clock_base +TIMER_VALUE ); } -void __init sp804_timer_disable (void __iomem *base) -{ -writel (0 , base +TIMER_CTRL ); -} - int __init __sp804_clocksource_and_sched_clock_init(void __iomem *base, const char *name, struct clk *clk,
include/clocksource/timer-sp804.h deleted +0 -29
@@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __CLKSOURCE_TIMER_SP804_H -#define __CLKSOURCE_TIMER_SP804_H - -struct clk ; - -int __sp804_clocksource_and_sched_clock_init (void __iomem *, -const char *,struct clk *,int ); -int __sp804_clockevents_init (void __iomem *,unsigned int , -struct clk *,const char *); -void sp804_timer_disable (void __iomem *); - -static inline void sp804_clocksource_init (void __iomem *base,const char *name) -{ -__sp804_clocksource_and_sched_clock_init (base, name,NULL ,0 ); -} - -static inline void sp804_clocksource_and_sched_clock_init (void __iomem *base, -const char *name) -{ -__sp804_clocksource_and_sched_clock_init (base, name,NULL ,1 ); -} - -static inline void sp804_clockevents_init (void __iomem *base,unsigned int irq,const char *name) -{ -__sp804_clockevents_init (base, irq,NULL , name); - -} -#endif
Signature · 1 line
2.25.1
PATCH 5/10 clocksource/drivers/sp804: Delete the leading "__" of some functions
In reply to Daniel LezcanoFrom: Zhen Lei <[email protected]>
Delete the leading "__" of __sp804_clocksource_and_sched_clock_init() and __sp804_clockevents_init(), make it looks a little more comfortable.
--- drivers/clocksource/timer-sp804.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-)
drivers/clocksource/timer-sp804.c +15 -12
@@ -65,10 +65,10 @@ static u64 notrace sp804_read(void)return ~readl_relaxed (sched_clock_base +TIMER_VALUE ); } -int __init __sp804_clocksource_and_sched_clock_init (void __iomem *base, -const char *name, -struct clk *clk, -int use_sched_clock) +int __init sp804_clocksource_and_sched_clock_init (void __iomem *base, +const char *name, +struct clk *clk, +int use_sched_clock) {long rate;
@@ -159,7 +159,8 @@ static struct clock_event_device sp804_clockevent = { .rating = 300, }; -int __init __sp804_clockevents_init (void __iomem *base,unsigned int irq,struct clk *clk,const char *name) +int __init sp804_clockevents_init (void __iomem *base,unsigned int irq, +struct clk *clk,const char *name) {struct clock_event_device *evt = &sp804_clockevent;long rate;
@@ -228,21 +229,22 @@ static int __init sp804_of_init(struct device_node *np)of_property_read_u32 (np,"arm,sp804-has-irq" , &irq_num);if (irq_num ==2 ) { - ret =__sp804_clockevents_init (base +TIMER_2_BASE , irq, clk2, name); + ret =sp804_clockevents_init (base +TIMER_2_BASE , irq, clk2, name);if (ret) goto err; - ret =__sp804_clocksource_and_sched_clock_init (base, name, clk1,1 ); + ret =sp804_clocksource_and_sched_clock_init (base, + name, clk1,1 );if (ret) goto err; }else { - ret =__sp804_clockevents_init (base, irq, clk1 , name); + ret =sp804_clockevents_init (base, irq, clk1, name);if (ret) goto err; - ret =__sp804_clocksource_and_sched_clock_init (base +TIMER_2_BASE , - name, clk2,1 ); + ret =sp804_clocksource_and_sched_clock_init (base +TIMER_2_BASE , + name, clk2,1 );if (ret) goto err; }
@@ -282,7 +284,8 @@ static int __init integrator_cp_of_init(struct device_node *np) goto err;if (!init_count) { - ret =__sp804_clocksource_and_sched_clock_init (base, name, clk,0 ); + ret =sp804_clocksource_and_sched_clock_init (base, + name, clk,0 );if (ret) goto err; }else {
@@ -290,7 +293,7 @@ static int __init integrator_cp_of_init(struct device_node *np)if (irq <=0 ) goto err; - ret =__sp804_clockevents_init (base, irq, clk, name); + ret =sp804_clockevents_init (base, irq, clk, name);if (ret) goto err; }
Signature · 1 line
2.25.1
PATCH 6/10 clocksource/drivers/sp804: Remove a mismatched comment
In reply to Daniel LezcanoFrom: Zhen Lei <[email protected]>
writel(0, base + TIMER_CTRL);
... ...writel(xxx | TIMER_CTRL_PERIODIC, base + TIMER_CTRL);
The timer is just temporarily disabled, and it will be set to periodic mode later.
The description of the field TimerMode of the register TimerXControl as shown below:
0 = Timer module is in free-running mode (default)
1 = Timer module is in periodic mode.
--- drivers/clocksource/timer-sp804.c | 1 - 1 file changed, 1 deletion(-)
drivers/clocksource/timer-sp804.c +0 -1
@@ -76,7 +76,6 @@ int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,if (rate <0 )return -EINVAL ; -/* setup timer 0 as free-running clocksource */ writel (0 , base +TIMER_CTRL );writel (0xffffffff , base +TIMER_LOAD );writel (0xffffffff , base +TIMER_VALUE );
Signature · 1 line
2.25.1
PATCH 7/10 clocksource/drivers/sp804: Prepare for support non-standard register offset
In reply to Daniel LezcanoFrom: Zhen Lei <[email protected]>
Add two local variables: timer1_base and timer2_base in sp804_of_init(), to avoid repeatedly calculate the base address of timer2, and make it easier to recognize timer1. Hope to make the next patch looks more clear.
No functional change.
--- drivers/clocksource/timer-sp804.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
drivers/clocksource/timer-sp804.c +11 -6
@@ -188,6 +188,8 @@ static int __init sp804_of_init(struct device_node *np) {static bool initialized = false;void __iomem *base; +void __iomem *timer1_base; +void __iomem *timer2_base;int irq, ret = -EINVAL ;u32 irq_num =0 ;struct clk *clk1, *clk2;
@@ -197,9 +199,12 @@ static int __init sp804_of_init(struct device_node *np)if (!base)return -ENXIO ; + timer1_base = base; + timer2_base = base +TIMER_2_BASE ; +/* Ensure timers are disabled */ -writel (0 , base +TIMER_CTRL ); -writel (0 , base +TIMER_2_BASE +TIMER_CTRL ); +writel (0 , timer1_base +TIMER_CTRL ); +writel (0 , timer2_base +TIMER_CTRL );if (initialized || !of_device_is_available (np)) { ret = -EINVAL ;
@@ -228,21 +233,21 @@ static int __init sp804_of_init(struct device_node *np)of_property_read_u32 (np,"arm,sp804-has-irq" , &irq_num);if (irq_num ==2 ) { - ret =sp804_clockevents_init (base +TIMER_2_BASE , irq, clk2, name); + ret =sp804_clockevents_init (timer2_base, irq, clk2, name);if (ret) goto err; - ret =sp804_clocksource_and_sched_clock_init (base, + ret =sp804_clocksource_and_sched_clock_init (timer1_base, name, clk1,1 );if (ret) goto err; }else { - ret =sp804_clockevents_init (base, irq, clk1, name); + ret =sp804_clockevents_init (timer1_base, irq, clk1, name);if (ret) goto err; - ret =sp804_clocksource_and_sched_clock_init (base +TIMER_2_BASE , + ret =sp804_clocksource_and_sched_clock_init (timer2_base, name, clk2,1 );if (ret) goto err;
Signature · 1 line
2.25.1
PATCH 8/10 clocksource/drivers/sp804: Support non-standard register offset
In reply to Daniel LezcanoFrom: Zhen Lei <[email protected]>
The ARM SP804 supports a maximum of 32-bit counter, but Hisilicon extends it to 64-bit. That means, the registers: TimerXload, TimerXValue and TimerXBGLoad are 64bits, all other registers are the same as those in the SP804. The driver code can be completely reused except that the register offset is different.
Currently, we get a timer register address by: add the constant register offset to the timer base address. e.g. "base + TIMER_CTRL". It can not be dynamically adjusted at run time.
So create a new structure "sp804_timer" to record the original registers offset, and create a new structure "sp804_clkevt" to record the calculated registers address. So the "base + TIMER_CTRL" is changed to "clkevt->ctrl", this will faster than "base + timer->ctrl".
For example:
struct sp804_timer arm_sp804_timer = {
.ctrl = TIMER_CTRL,
};
struct sp804_clkevt clkevt;
clkevt.ctrl = base + arm_sp804_timer.ctrl.- writel(0, base + TIMER_CTRL);
+ writel(0, clkevt->ctrl);
--- drivers/clocksource/timer-sp.h | 26 +++++++ drivers/clocksource/timer-sp804.c | 108 +++++++++++++++++++++++------- 2 files changed, 108 insertions(+), 26 deletions(-)
drivers/clocksource/timer-sp.h +26 -0
@@ -10,6 +10,7 @@* * Every SP804 contains two identical timers. */ +#define NR_TIMERS 2#define TIMER_1_BASE 0x00#define TIMER_2_BASE 0x20
@@ -29,3 +30,28 @@#define TIMER_RIS 0x10/* CVR ro */ #define TIMER_MIS 0x14/* CVR ro */ #define TIMER_BGLOAD 0x18/* CVR rw */ + +struct sp804_timer { +int load; +int value; +int ctrl; +int intclr; +int ris; +int mis; +int bgload; +int timer_base[NR_TIMERS ]; +int width; +}; + +struct sp804_clkevt { +void __iomem *base; +void __iomem *load; +void __iomem *value; +void __iomem *ctrl; +void __iomem *intclr; +void __iomem *ris; +void __iomem *mis; +void __iomem *bgload; +unsigned long reload; +int width; +};
drivers/clocksource/timer-sp804.c +82 -26
215 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 9/10 clocksource/drivers/sp804: Add support for Hisilicon sp804 timer
In reply to Daniel LezcanoFrom: Zhen Lei <[email protected]>
The ARM SP804 supports a maximum of 32-bit counter, but Hisilicon extends it to 64-bit. That means, the registers: TimerXload, TimerXValue and TimerXBGLoad are 64bits, all other registers are the same as those in the SP804. The driver code can be completely reused except that the register offset is different.
Use compatible = "hisilicon,sp804" mark as Hisilicon sp804 timer.
--- drivers/clocksource/timer-sp804.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
drivers/clocksource/timer-sp804.c +27 -0
@@ -20,6 +20,18 @@#include "timer-sp.h" +/* Hisilicon 64-bit timer(a variant of ARM SP804) */ +#define HISI_TIMER_1_BASE 0x00 +#define HISI_TIMER_2_BASE 0x40 +#define HISI_TIMER_LOAD 0x00 +#define HISI_TIMER_VALUE 0x08 +#define HISI_TIMER_CTRL 0x10 +#define HISI_TIMER_INTCLR 0x14 +#define HISI_TIMER_RIS 0x18 +#define HISI_TIMER_MIS 0x1c +#define HISI_TIMER_BGLOAD 0x20 + +struct sp804_timer __initdata arm_sp804_timer = { .load =TIMER_LOAD , .value =TIMER_VALUE ,
@@ -29,6 +41,15 @@ struct sp804_timer __initdata arm_sp804_timer = { .width = 32, }; +struct sp804_timer __initdata hisi_sp804_timer = { + .load =HISI_TIMER_LOAD , + .value =HISI_TIMER_VALUE , + .ctrl =HISI_TIMER_CTRL , + .intclr =HISI_TIMER_INTCLR , + .timer_base = {HISI_TIMER_1_BASE ,HISI_TIMER_2_BASE }, + .width =64 , +}; +static struct sp804_clkevt sp804_clkevt[NR_TIMERS ];static long __init sp804_get_clock_rate (struct clk *clk,const char *name)
@@ -315,6 +336,12 @@ static int __init arm_sp804_of_init(struct device_node *np) }TIMER_OF_DECLARE (sp804,"arm,sp804" , arm_sp804_of_init); +static int __init hisi_sp804_of_init (struct device_node *np) +{ +return sp804_of_init (np, &hisi_sp804_timer); +} +TIMER_OF_DECLARE (hisi_sp804,"hisilicon,sp804" , hisi_sp804_of_init); +static int __init integrator_cp_of_init (struct device_node *np) {static int init_count =0 ;
Signature · 1 line
2.25.1
PATCH 10/10 clocksource/drivers/sp804: Enable Hisilicon sp804 timer 64bit mode
In reply to Daniel LezcanoFrom: Zhen Lei <[email protected]>
A 100MHZ 32-bit timer will be wrapped up less than 43s. Although the kernel maintains a software high 32-bit count in the tick IRQ. But it's not applicable to the user mode APPs.
Note: The kernel still uses the lower 32 bits of the timer.
--- drivers/clocksource/timer-sp.h | 6 ++++++ drivers/clocksource/timer-sp804.c | 11 +++++++++++ 2 files changed, 17 insertions(+)
drivers/clocksource/timer-sp.h +6 -0
@@ -33,12 +33,15 @@struct sp804_timer {int load; +int load_h;int value; +int value_h;int ctrl;int intclr;int ris;int mis;int bgload; +int bgload_h;int timer_base[NR_TIMERS ];int width; };
@@ -46,12 +49,15 @@ struct sp804_timer {struct sp804_clkevt {void __iomem *base;void __iomem *load; +void __iomem *load_h;void __iomem *value; +void __iomem *value_h;void __iomem *ctrl;void __iomem *intclr;void __iomem *ris;void __iomem *mis;void __iomem *bgload; +void __iomem *bgload_h;unsigned long reload;int width; };
drivers/clocksource/timer-sp804.c +11 -0
@@ -24,12 +24,15 @@#define HISI_TIMER_1_BASE 0x00#define HISI_TIMER_2_BASE 0x40#define HISI_TIMER_LOAD 0x00 +#define HISI_TIMER_LOAD_H 0x04#define HISI_TIMER_VALUE 0x08 +#define HISI_TIMER_VALUE_H 0x0c#define HISI_TIMER_CTRL 0x10#define HISI_TIMER_INTCLR 0x14#define HISI_TIMER_RIS 0x18#define HISI_TIMER_MIS 0x1c#define HISI_TIMER_BGLOAD 0x20 +#define HISI_TIMER_BGLOAD_H 0x24struct sp804_timer __initdata arm_sp804_timer = {
@@ -43,7 +46,9 @@ struct sp804_timer __initdata arm_sp804_timer = {struct sp804_timer __initdata hisi_sp804_timer = { .load =HISI_TIMER_LOAD , + .load_h =HISI_TIMER_LOAD_H , .value =HISI_TIMER_VALUE , + .value_h =HISI_TIMER_VALUE_H , .ctrl =HISI_TIMER_CTRL , .intclr =HISI_TIMER_INTCLR , .timer_base = {HISI_TIMER_1_BASE ,HISI_TIMER_2_BASE },
@@ -129,6 +134,10 @@ int __init sp804_clocksource_and_sched_clock_init(void __iomem *base,writel (0 , clkevt->ctrl);writel (0xffffffff , clkevt->load);writel (0xffffffff , clkevt->value); +if (clkevt->width ==64 ) { +writel (0xffffffff , clkevt->load_h); +writel (0xffffffff , clkevt->value_h); + }writel (TIMER_CTRL_32BIT |TIMER_CTRL_ENABLE |TIMER_CTRL_PERIODIC , clkevt->ctrl);
@@ -245,7 +254,9 @@ static void __init sp804_clkevt_init(struct sp804_timer *timer, void __iomem *ba clkevt = &sp804_clkevt[i]; clkevt->base = timer_base; clkevt->load = timer_base + timer->load; + clkevt->load_h = timer_base + timer->load_h; clkevt->value = timer_base + timer->value; + clkevt->value_h = timer_base + timer->value_h; clkevt->ctrl = timer_base + timer->ctrl; clkevt->intclr = timer_base + timer->intclr; clkevt->width = timer->width;
Signature · 1 line
2.25.1