Skip to contentSkip to conversation

arm-bsp/n1sdp: Use IMAGE_EFI_BOOT_FILES instead of IMAGE_BOOT_FILES

PATCH In review Nathan Dunne 3 participants 3 messages Sep 24, 2020

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm-bsp/n1sdp: Use IMAGE_EFI_BOOT_FILES instead of IMAGE_BOOT_FILES

Replaced IMAGE_BOOT_FILES variable with IMAGE_EFI_BOOT_FILES in the machine config file for N1SDP, in line with commit 85574ce0cf84eaf828334dd2fafadc18909e73b5 from oe-core.

Change-Id: Ib7b76c01870dc10f49be4bb9c0b7623bd2819d46
Issue-Id: SCM-1300

---
 meta-arm-bsp/conf/machine/n1sdp.conf | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta-arm-bsp/conf/machine/n1sdp.conf +1 -1
index e4e6663..9df3e50 100644
@@ -15,7 +15,7 @@ SERIAL_CONSOLES = "115200;ttyAMA0"
 
 # Set default WKS
 WKS_FILE ?= "n1sdp-efidisk.wks"
-IMAGE_BOOT_FILES ?= "n1sdp-multi-chip.dtb n1sdp-single-chip.dtb"
+IMAGE_EFI_BOOT_FILES ?= "n1sdp-multi-chip.dtb n1sdp-single-chip.dtb"
 WKS_FILE_DEPENDS_append = " ${EXTRA_IMAGEDEPENDS}"
 
 # Use kernel provided by linaro (Contains support for SCMi or HDMI)
Signature · 1 line
2.17.1
Reviewed-by on v1 1/1
#1 lore raw
Quoted 9 lines

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Nathan Dunne via lists.yoctoproject.org
Sent: 24 September 2020 15:50
To: [email protected]
Cc: nd <[email protected]>; Nathan Dunne <[email protected]>
Subject: [meta-arm] [PATCH] arm-bsp/n1sdp: Use IMAGE_EFI_BOOT_FILES instead of IMAGE_BOOT_FILES

Quoted 8 lines

Replaced IMAGE_BOOT_FILES variable with IMAGE_EFI_BOOT_FILES in the machine config file for N1SDP, in line with commit 85574ce0cf84eaf828334dd2fafadc18909e73b5 from oe-core.

Change-Id: Ib7b76c01870dc10f49be4bb9c0b7623bd2819d46
Issue-Id: SCM-1300

---

Quoted 19 lines

meta-arm-bsp/conf/machine/n1sdp.conf | 2 +-

1 file changed, 1 insertion(+), 1 deletion(-)
meta-arm- renamed from meta-arm-bsp/conf/machine/n1sdp.conf +0 -0

bsp/conf/machine/n1sdp.conf
index e4e6663..9df3e50 100644

meta-arm-bsp/conf/machine/n1sdp.conf +0 -0
@@ -15,7 +15,7 @@ SERIAL_CONSOLES = "115200;ttyAMA0"
 
 # Set default WKS

WKS_FILE ?= "n1sdp-efidisk.wks"

meta-arm-bsp/conf/machine/n1sdp.conf +1 -1
-IMAGE_BOOT_FILES ?= "n1sdp-multi-chip.dtb n1sdp-single-chip.dtb"
+IMAGE_EFI_BOOT_FILES ?= "n1sdp-multi-chip.dtb n1sdp-single-chip.dtb"

WKS_FILE_DEPENDS_append = " ${EXTRA_IMAGEDEPENDS}"

# Use kernel provided by linaro (Contains support for SCMi or HDMI) --
2.17.1

#2 lore raw
Quoted 13 lines · Diego Sueiro
Quoted 13 lines

-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of Nathan Dunne via lists.yoctoproject.org
Sent: 24 September 2020 15:50
To: [email protected]
Cc: nd <[email protected]>; Nathan Dunne <[email protected]>
Subject: [meta-arm] [PATCH] arm-bsp/n1sdp: Use IMAGE_EFI_BOOT_FILES instead of IMAGE_BOOT_FILES

Replaced IMAGE_BOOT_FILES variable with IMAGE_EFI_BOOT_FILES in the machine config file for N1SDP, in line with commit 85574ce0cf84eaf828334dd2fafadc18909e73b5 from oe-core.

Quoted 6 lines
Quoted 4 lines

Change-Id: Ib7b76c01870dc10f49be4bb9c0b7623bd2819d46
Issue-Id: SCM-1300

---

Pulled into master.

Thanks,
Jon

Quoted 25 lines
Quoted 20 lines

meta-arm-bsp/conf/machine/n1sdp.conf | 2 +-

1 file changed, 1 insertion(+), 1 deletion(-)
meta-arm- renamed from meta-arm-bsp/conf/machine/n1sdp.conf +0 -0

bsp/conf/machine/n1sdp.conf
index e4e6663..9df3e50 100644

meta-arm-bsp/conf/machine/n1sdp.conf +0 -0
@@ -15,7 +15,7 @@ SERIAL_CONSOLES = "115200;ttyAMA0"
 
 # Set default WKS

WKS_FILE ?= "n1sdp-efidisk.wks"

meta-arm-bsp/conf/machine/n1sdp.conf +1 -1
-IMAGE_BOOT_FILES ?= "n1sdp-multi-chip.dtb n1sdp-single-chip.dtb"
+IMAGE_EFI_BOOT_FILES ?= "n1sdp-multi-chip.dtb n1sdp-single-chip.dtb"

WKS_FILE_DEPENDS_append = " ${EXTRA_IMAGEDEPENDS}"

# Use kernel provided by linaro (Contains support for SCMi or HDMI) --
2.17.1