Skip to contentSkip to conversation

zoned block device specific errors

PATCH Superseded Keith Busch 3 participants 9 messages Sep 24, 2020 – Oct 13, 2020

Subsystems (5)
Documentation SCSI Block layer NVMe +1 more subsystems
lore
Share & tools
lore

Keith Busch

author maintainer
#0 lore raw

v4 cover zoned block device specific errors

Zone block devices may have some limits that require special handling. This series provides a way for drivers to notify of these conditions.

v3 -> v4:

Added reviews/acks/sobs

Dropped unintended patch

Damien Le Moal (1):
scsi: handle zone resources errors

Keith Busch (2):
block: add zone specific block statuses
nvme: translate zone resource errors

 Documentation/block/queue-sysfs.rst |  8 ++++++++
 block/blk-core.c                    |  4 ++++
 drivers/nvme/host/core.c            |  4 ++++
 drivers/scsi/scsi_lib.c             |  9 +++++++++
 include/linux/blk_types.h           | 18 ++++++++++++++++++
 5 files changed, 43 insertions(+)
Signature · 1 line
2.24.1
author maintainer
#1 lore raw

PATCH v4 1/3 block: add zone specific block statuses

A zoned device with limited resources to open or activate zones may return an error when the host exceeds those limits. The same command may be successful if retried later, but the host needs to wait for specific zone states before it should expect a retry to succeed. Have the block layer provide an appropriate status for these conditions so applications can distinuguish this error for special handling.

---
 Documentation/block/queue-sysfs.rst |  8 ++++++++
 block/blk-core.c                    |  4 ++++
 include/linux/blk_types.h           | 18 ++++++++++++++++++
 3 files changed, 30 insertions(+)
Documentation/block/queue-sysfs.rst +8 -0
index f261a5c84170..2638d3446b79 100644
@@ -124,6 +124,10 @@ For zoned block devices (zoned attribute indicating "host-managed" or
 EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value.
 If this value is 0, there is no limit.
 
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW
+errno.
+
 max_open_zones (RO)
 -------------------
 For zoned block devices (zoned attribute indicating "host-managed" or
@@ -131,6 +135,10 @@ For zoned block devices (zoned attribute indicating "host-managed" or
 EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value.
 If this value is 0, there is no limit.
 
+If the host attempts to exceed this limit, the driver should report this error
+with BLK_STS_ZONE_OPEN_RESOURCE, which user space may see as the ETOOMANYREFS
+errno.
+
 max_sectors_kb (RW)
 -------------------
 This is the maximum number of kilobytes that the block layer will allow
block/blk-core.c +4 -0
index 10c08ac50697..8bffc7732e37 100644
@@ -186,6 +186,10 @@ static const struct {
 	/* device mapper special case, should not leak out: */
 	[BLK_STS_DM_REQUEUE]	= { -EREMCHG, "dm internal retry" },
 
+	/* zone device specific errors */
+	[BLK_STS_ZONE_OPEN_RESOURCE]	= { -ETOOMANYREFS, "open zones exceeded" },
+	[BLK_STS_ZONE_ACTIVE_RESOURCE]	= { -EOVERFLOW, "active zones exceeded" },
+
 	/* everything else not covered above: */
 	[BLK_STS_IOERR]		= { -EIO,	"I/O" },
 };
include/linux/blk_types.h +18 -0
index 4ecf4fed171f..8603fc5f86a3 100644
@@ -103,6 +103,24 @@ typedef u8 __bitwise blk_status_t;
  */
 #define BLK_STS_ZONE_RESOURCE	((__force blk_status_t)14)
 
+/*
+ * BLK_STS_ZONE_OPEN_RESOURCE is returned from the driver in the completion
+ * path if the device returns a status indicating that too many zone resources
+ * are currently open. The same command should be successful if resubmitted
+ * after the number of open zones decreases below the device's limits, which is
+ * reported in the request_queue's max_open_zones.
+ */
+#define BLK_STS_ZONE_OPEN_RESOURCE	((__force blk_status_t)15)
+
+/*
+ * BLK_STS_ZONE_ACTIVE_RESOURCE is returned from the driver in the completion
+ * path if the device returns a status indicating that too many zone resources
+ * are currently active. The same command should be successful if resubmitted
+ * after the number of active zones decreases below the device's limits, which
+ * is reported in the request_queue's max_active_zones.
+ */
+#define BLK_STS_ZONE_ACTIVE_RESOURCE	((__force blk_status_t)16)
+
 /**
  * blk_path_error - returns true if error may be path related
  * @error: status the request was completed with
Signature · 1 line
2.24.1
author maintainer
#2 lore raw

Re: [PATCHv4 1/3] block: add zone specific block statuses

Quoted 6 lines · Keith Busch

A zoned device with limited resources to open or activate zones may return an error when the host exceeds those limits. The same command may be successful if retried later, but the host needs to wait for specific zone states before it should expect a retry to succeed. Have the block layer provide an appropriate status for these conditions so applications can distinuguish this error for special handling.

Hi Jens,

Just checking in -- do you have any thoughts on this, or should I just wait a bit more?

thx,
Keith

author maintainer
#3 lore raw

Re: [PATCHv4 1/3] block: add zone specific block statuses

In reply to Keith Busch
Quoted 6 lines · Keith Busch

A zoned device with limited resources to open or activate zones may return an error when the host exceeds those limits. The same command may be successful if retried later, but the host needs to wait for specific zone states before it should expect a retry to succeed. Have the block layer provide an appropriate status for these conditions so applications can distinuguish this error for special handling.

Hi Jens,

Can be considered for inclusion? The series still applies cleanly to block for-next.

author maintainer
#4 lore raw

Re: [PATCHv4 1/3] block: add zone specific block statuses

Hi Jens,

I'm going to try one more time in the hope you've just been too busy to notice these patches. The series has been unchanged for a month now, and has reviews from all the right people. Can this be considered for inclusion?

maintainer
#5 lore raw

Re: [PATCHv4 1/3] block: add zone specific block statuses

Quoted 6 lines · Keith Busch

Hi Jens,

I'm going to try one more time in the hope you've just been too busy to notice these patches. The series has been unchanged for a month now, and has reviews from all the right people. Can this be considered for inclusion?

Thanks for the pings, finally got them picked up. Sorry about the delay!

Signature · 1 line
Jens Axboe
author maintainer
#6 lore raw

PATCH v4 2/3 nvme: translate zone resource errors

In reply to Keith Busch

Translate zoned resource errors to the appropriate blk_status_t.

---
 drivers/nvme/host/core.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/nvme/host/core.c +4 -0
index 614cd455836b..a0d26fcbf923 100644
@@ -236,6 +236,10 @@ static blk_status_t nvme_error_status(u16 status)
 		return BLK_STS_NEXUS;
 	case NVME_SC_HOST_PATH_ERROR:
 		return BLK_STS_TRANSPORT;
+	case NVME_SC_ZONE_TOO_MANY_ACTIVE:
+		return BLK_STS_ZONE_ACTIVE_RESOURCE;
+	case NVME_SC_ZONE_TOO_MANY_OPEN:
+		return BLK_STS_ZONE_OPEN_RESOURCE;
 	default:
 		return BLK_STS_IOERR;
 	}
Signature · 1 line
2.24.1
author maintainer
#7 lore raw

PATCH v4 3/3 scsi: handle zone resources errors

In reply to Keith Busch

From: Damien Le Moal <[email protected]>

ZBC or ZAC disks that have a limit on the number of open zones may fail a zone open command or a write to a zone that is not already implicitly or explicitly open if the total number of open zones is already at the maximum allowed.

For these operations, instead of returning the generic BLK_STS_IOERR, return BLK_STS_ZONE_OPEN_RESOURCE which is returned as -ETOOMANYREFS to the I/O issuer, allowing the device user to act appropriately on these relatively benign zone resource errors.

---
 drivers/scsi/scsi_lib.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/scsi/scsi_lib.c +9 -0
index 7affaaf8b98e..c129ac6666da 100644
@@ -758,6 +758,15 @@ static void scsi_io_completion_action(struct scsi_cmnd *cmd, int result)
 			/* See SSC3rXX or current. */
 			action = ACTION_FAIL;
 			break;
+		case DATA_PROTECT:
+			action = ACTION_FAIL;
+			if ((sshdr.asc == 0x0C && sshdr.ascq == 0x12) ||
+			    (sshdr.asc == 0x55 &&
+			     (sshdr.ascq == 0x0E || sshdr.ascq == 0x0F))) {
+				/* Insufficient zone resources */
+				blk_stat = BLK_STS_ZONE_OPEN_RESOURCE;
+			}
+			break;
 		default:
 			action = ACTION_FAIL;
 			break;
Signature · 1 line
2.24.1