bpf: Enable bpf_skc_to_* sock casting helper to networking prog type
Subsystems (8)
v4 cover bpf: Enable bpf_skc_to_* sock casting helper to networking prog type
This set allows networking prog type to directly read fields from the in-kernel socket type, e.g. "struct tcp_sock".
Patch 2 has the details on the use case.
v3:
- Pass arg_btf_id instead of fn into check_reg_type() in Patch 1 (Lorenz)
- Move arg_btf_id from func_proto to struct bpf_reg_types in Patch 2 (Lorenz)
- Remove test_sock_fields from .gitignore in Patch 8 (Andrii)
- Add tests to have better coverage on the modified helpers (Alexei) Patch 13 is added.
- Use "void *sk" as the helper argument in UAPI bpf.h
v3:
- ARG_PTR_TO_SOCK_COMMON_OR_NULL was attempted in v2. The _OR_NULL was needed because the PTR_TO_BTF_ID could be NULL but note that a could be NULL PTR_TO_BTF_ID is not a scalar NULL to the verifier. "_OR_NULL" implicitly gives an expectation that the helper can take a scalar NULL which does not make sense in most (except one) helpers. Passing scalar NULL should be rejected at the verification time.
Thus, this patch uses ARG_PTR_TO_BTF_ID_SOCK_COMMON to specify that the helper can take both the btf-id ptr or the legacy PTR_TO_SOCK_COMMON but not scalar NULL. It requires the func_proto to explicitly specify the arg_btf_id such that there is a very clear expectation that the helper can handle a NULL PTR_TO_BTF_ID.
v2:
- Add ARG_PTR_TO_SOCK_COMMON_OR_NULL (Lorenz)
Martin KaFai Lau (13):
bpf: Move the PTR_TO_BTF_ID check to check_reg_type()
bpf: Enable bpf_skc_to_* sock casting helper to networking prog type
bpf: Change bpf_sk_release and bpf_sk_*cgroup_id to accept
ARG_PTR_TO_BTF_ID_SOCK_COMMON
bpf: Change bpf_sk_storage_*() to accept ARG_PTR_TO_BTF_ID_SOCK_COMMON
bpf: Change bpf_tcp_*_syncookie to accept
ARG_PTR_TO_BTF_ID_SOCK_COMMON
bpf: Change bpf_sk_assign to accept ARG_PTR_TO_BTF_ID_SOCK_COMMON
bpf: selftest: Add ref_tracking verifier test for bpf_skc casting
bpf: selftest: Move sock_fields test into test_progs
bpf: selftest: Adapt sock_fields test to use skel and global variables
bpf: selftest: Use network_helpers in the sock_fields test
bpf: selftest: Use bpf_skc_to_tcp_sock() in the sock_fields test
bpf: selftest: Remove enum tcp_ca_state from bpf_tcp_helpers.h
bpf: selftest: Add test_btf_skc_cls_ingress
include/linux/bpf.h | 1 +
include/net/bpf_sk_storage.h | 2 -
include/uapi/linux/bpf.h | 15 +-
kernel/bpf/bpf_lsm.c | 4 +-
kernel/bpf/verifier.c | 94 ++--
net/core/bpf_sk_storage.c | 29 +-
net/core/filter.c | 111 ++--
net/ipv4/bpf_tcp_ca.c | 23 +-
tools/include/uapi/linux/bpf.h | 15 +-
tools/testing/selftests/bpf/.gitignore | 1 -
tools/testing/selftests/bpf/Makefile | 2 +-
tools/testing/selftests/bpf/bpf_tcp_helpers.h | 13 +-
.../bpf/prog_tests/btf_skc_cls_ingress.c | 234 +++++++++
.../selftests/bpf/prog_tests/sock_fields.c | 382 ++++++++++++++
tools/testing/selftests/bpf/progs/bpf_cubic.c | 2 +
tools/testing/selftests/bpf/progs/bpf_dctcp.c | 2 +
.../bpf/progs/test_btf_skc_cls_ingress.c | 174 +++++++
..._sock_fields_kern.c => test_sock_fields.c} | 176 ++++---
.../testing/selftests/bpf/test_sock_fields.c | 482 ------------------
.../selftests/bpf/verifier/ref_tracking.c | 47 ++
20 files changed, 1093 insertions(+), 716 deletions(-)
create mode 100644 tools/testing/selftests/bpf/prog_tests/btf_skc_cls_ingress.c
create mode 100644 tools/testing/selftests/bpf/prog_tests/sock_fields.c
create mode 100644 tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c
rename tools/testing/selftests/bpf/progs/{test_sock_fields_kern.c => test_sock_fields.c} (61%)
delete mode 100644 tools/testing/selftests/bpf/test_sock_fields.cSignature · 1 line
2.24.1
PATCH v4 1/13 bpf: Move the PTR_TO_BTF_ID check to check_reg_type()
check_reg_type() checks whether a reg can be used as an arg of a func_proto. For PTR_TO_BTF_ID, the check is actually not completely done until the reg->btf_id is pointing to a kernel struct that is acceptable by the func_proto.
Thus, this patch moves the btf_id check into check_reg_type(). "arg_type" and "arg_btf_id" are passed to check_reg_type() instead of "compatible". The compatible_reg_types[] usage is localized in check_reg_type() now.
The "if (!btf_id) verbose(...); " is also removed since it won't happen.
--- kernel/bpf/verifier.c | 60 ++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 29 deletions(-)
kernel/bpf/verifier.c +31 -29
@@ -4028,19 +4028,27 @@ static const struct bpf_reg_types *compatible_reg_types[__BPF_ARG_TYPE_MAX] = { };static int check_reg_type (struct bpf_verifier_env *env,u32 regno, -const struct bpf_reg_types *compatible) +enum bpf_arg_type arg_type, +const u32 *arg_btf_id) {struct bpf_reg_state *regs =cur_regs (env), *reg = ®s[regno];enum bpf_reg_type expected, type = reg->type; +const struct bpf_reg_types *compatible;int i, j; + compatible = compatible_reg_types[arg_type]; +if (!compatible) { +verbose (env,"verifier internal error: unsupported arg type %d\n" , arg_type); +return -EFAULT ; + } +for (i =0 ; i <ARRAY_SIZE (compatible->types); i++) { expected = compatible->types[i];if (expected ==NOT_INIT )break ;if (type == expected) -return 0 ; + goto found; }verbose (env,"R%d type=%s expected=" , regno, reg_type_str[type]);
@@ -4048,6 +4056,25 @@ static int check_reg_type(struct bpf_verifier_env *env, u32 regno,verbose (env,"%s, " , reg_type_str[compatible->types[j]]);verbose (env,"%s\n" , reg_type_str[compatible->types[j]]);return -EACCES ; + +found: +if (type ==PTR_TO_BTF_ID ) { +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, + *arg_btf_id)) { +verbose (env,"R%d is of type %s but %s is expected\n" , + regno,kernel_type_name (reg->btf_id), +kernel_type_name (*arg_btf_id)); +return -EACCES ; + } + +if (!tnum_is_const (reg->var_off) || reg->var_off.value) { +verbose (env,"R%d is a pointer to in-kernel struct with non-zero offset\n" , + regno); +return -EACCES ; + } + } + +return 0 ; } static int check_func_arg(struct bpf_verifier_env *env, u32 arg,
@@ -4057,7 +4084,6 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,u32 regno =BPF_REG_1 + arg;struct bpf_reg_state *regs =cur_regs (env), *reg = ®s[regno];enum bpf_arg_type arg_type = fn->arg_type[arg]; -const struct bpf_reg_types *compatible;enum bpf_reg_type type = reg->type;int err =0 ;
@@ -4097,35 +4123,11 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,*/ goto skip_type_check; - compatible = compatible_reg_types[arg_type]; -if (!compatible) { -verbose (env,"verifier internal error: unsupported arg type %d\n" , arg_type); -return -EFAULT ; - } - - err =check_reg_type (env, regno, compatible); + err =check_reg_type (env, regno, arg_type, fn->arg_btf_id[arg]);if (err)return err; -if (type ==PTR_TO_BTF_ID ) { -const u32 *btf_id = fn->arg_btf_id[arg]; - -if (!btf_id) { -verbose (env,"verifier internal error: missing BTF ID\n" ); -return -EFAULT ; - } - -if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *btf_id)) { -verbose (env,"R%d is of type %s but %s is expected\n" , - regno,kernel_type_name (reg->btf_id),kernel_type_name (*btf_id)); -return -EACCES ; - } -if (!tnum_is_const (reg->var_off) || reg->var_off.value) { -verbose (env,"R%d is a pointer to in-kernel struct with non-zero offset\n" , - regno); -return -EACCES ; - } - }else if (type ==PTR_TO_CTX ) { +if (type ==PTR_TO_CTX ) { err =check_ctx_reg (env, reg, regno);if (err <0 )return err;
Signature · 1 line
2.24.1
Re: [PATCH v4 bpf-next 01/13] bpf: Move the PTR_TO_BTF_ID check to check_reg_type()
Quoted 6 lines · Martin KaFai Lau
check_reg_type()checks whether a reg can be used as an arg of afunc_proto. ForPTR_TO_BTF_ID, the check is actually not completely done until thereg->btf_idis pointing to a kernel struct that is acceptable by thefunc_proto.
Quoted 8 lines
Thus, this patch moves the
btf_idcheck intocheck_reg_type(). "arg_type" and "arg_btf_id" are passed tocheck_reg_type()instead of "compatible". The compatible_reg_types[] usage is localized incheck_reg_type()now.The "if (!btf_id) verbose(...); " is also removed since it won't happen.
Signed-off-by Martin KaFai Lau <[email protected]>
Quoted 113 lines
--- kernel/bpf/verifier.c | 60 ++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 29 deletions(-)kernel/bpf/verifier.c +31
-30@@ -4028,19 +4028,27 @@ static const struct bpf_reg_types *compatible_reg_types[__BPF_ARG_TYPE_MAX] = { };static int check_reg_type (struct bpf_verifier_env *env,u32 regno, -const struct bpf_reg_types *compatible) +enum bpf_arg_type arg_type, +const u32 *arg_btf_id) {struct bpf_reg_state *regs =cur_regs (env), *reg = ®s[regno];enum bpf_reg_type expected, type = reg->type; +const struct bpf_reg_types *compatible;int i, j; + compatible = compatible_reg_types[arg_type]; +if (!compatible) { +verbose (env,"verifier internal error: unsupported arg type %d\n" , arg_type); +return -EFAULT ; + } +for (i =0 ; i <ARRAY_SIZE (compatible->types); i++) { expected = compatible->types[i];if (expected ==NOT_INIT )break ;if (type == expected) -return 0 ; + goto found; }verbose (env,"R%d type=%s expected=" , regno, reg_type_str[type]);@@ -4048,6 +4056,25 @@ static int check_reg_type(struct bpf_verifier_env *env, u32 regno,verbose (env,"%s, " , reg_type_str[compatible->types[j]]);verbose (env,"%s\n" , reg_type_str[compatible->types[j]]);return -EACCES ; + +found: +if (type ==PTR_TO_BTF_ID ) { +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, + *arg_btf_id)) { +verbose (env,"R%d is of type %s but %s is expected\n" , + regno,kernel_type_name (reg->btf_id), +kernel_type_name (*arg_btf_id)); +return -EACCES ; + } + +if (!tnum_is_const (reg->var_off) || reg->var_off.value) { +verbose (env,"R%d is a pointer to in-kernel struct with non-zero offset\n" , + regno); +return -EACCES ; + } + } + +return 0 ; } static int check_func_arg(struct bpf_verifier_env *env, u32 arg,@@ -4057,7 +4084,6 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,u32 regno =BPF_REG_1 + arg;struct bpf_reg_state *regs =cur_regs (env), *reg = ®s[regno];enum bpf_arg_type arg_type = fn->arg_type[arg]; -const struct bpf_reg_types *compatible;enum bpf_reg_type type = reg->type;int err =0 ;@@ -4097,35 +4123,11 @@ static int check_func_arg(struct bpf_verifier_env *env, u32 arg,*/ goto skip_type_check; - compatible = compatible_reg_types[arg_type]; -if (!compatible) { -verbose (env,"verifier internal error: unsupported arg type %d\n" , arg_type); -return -EFAULT ; - } - - err =check_reg_type (env, regno, compatible); + err =check_reg_type (env, regno, arg_type, fn->arg_btf_id[arg]);if (err)return err; -if (type ==PTR_TO_BTF_ID ) { -const u32 *btf_id = fn->arg_btf_id[arg]; - -if (!btf_id) { -verbose (env,"verifier internal error: missing BTF ID\n" ); -return -EFAULT ; - } - -if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *btf_id)) { -verbose (env,"R%d is of type %s but %s is expected\n" , - regno,kernel_type_name (reg->btf_id),kernel_type_name (*btf_id)); -return -EACCES ; - } -if (!tnum_is_const (reg->var_off) || reg->var_off.value) { -verbose (env,"R%d is a pointer to in-kernel struct with non-zero offset\n" , - regno); -return -EACCES ; - } - }else if (type ==PTR_TO_CTX ) { +if (type ==PTR_TO_CTX ) { err =check_ctx_reg (env, reg, regno);if (err <0 )return err; --2.24.1
Signature · 4 lines
Lorenz Bauer | Systems Engineer 6th Floor, County Hall/The Riverside Building, SE1 7PB, UK www.cloudflare.com
RE: [PATCH v4 bpf-next 01/13] bpf: Move the PTR_TO_BTF_ID check to check_reg_type()
In reply to Martin KaFai LauQuoted 10 lines · Martin KaFai Lau
check_reg_type()checks whether a reg can be used as an arg of afunc_proto. ForPTR_TO_BTF_ID, the check is actually not completely done until thereg->btf_idis pointing to a kernel struct that is acceptable by thefunc_proto.Thus, this patch moves the
btf_idcheck intocheck_reg_type(). "arg_type" and "arg_btf_id" are passed tocheck_reg_type()instead of "compatible". The compatible_reg_types[] usage is localized incheck_reg_type()now.
Quoted 4 lines
The "if (!btf_id) verbose(...); " is also removed since it won't happen.
Signed-off-by Martin KaFai Lau <[email protected]>---
PATCH v4 2/13 bpf: Enable bpf_skc_to_* sock casting helper to networking prog type
In reply to Martin KaFai LauThere is a constant need to add more fields into the bpf_tcp_sock for the bpf programs running at tc, sock_ops...etc.
A current workaround could be to use bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to do bpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from the tcp_sock.
This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose func_proto returns a btf_id. For example, the func_proto of bpf_skc_to_tcp_sock returns the btf_id of the kernel "struct tcp_sock".
These helpers are also added to is_ptr_cast_function().
It ensures the returning reg (BPF_REF_0) will also carries the ref_obj_id. That will keep the ref-tracking works properly.
The bpf_skc_to_* helpers are made available to most of the bpf prog types in filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap.
This patch adds a ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting
this arg can accept a btf-id-ptr (PTR_TO_BTF_ID + &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that
they will accept pointer obtained from skb->sk.
Instead of specifying both arg_type and arg_btf_id in the same func_proto which is how the current ARG_PTR_TO_BTF_ID does, the arg_btf_id of the new ARG_PTR_TO_BTF_ID_SOCK_COMMON is specified in the compatible_reg_types[] in verifier.c. The reason is the arg_btf_id is always the same. Discussion in this thread:
https://lore.kernel.org/bpf/[email protected]/
The ARG_PTR_TO_BTF_ID_ part gives a clear expectation that the helper is expecting a PTR_TO_BTF_ID which could be NULL. This is the same behavior as the existing helper taking ARG_PTR_TO_BTF_ID.
The _SOCK_COMMON part means the helper is also expecting the legacy SOCK_COMMON pointer.
By excluding the _OR_NULL part, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g. bpf_skc_to_tcp_sock(NULL) will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load.
[ ARG_PTR_TO_BTF_ID_SOCK_COMMON will be used to replace
ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take the PTR_TO_BTF_ID returned by the bpf_skc_to_*() helpers.
The only special case is bpf_sk_lookup_assign() which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renaming ARG_PTR_TO_SOCKET_OR_NULL to ARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ]
[ When converting the older helpers that take ARG_PTR_TO_SOCK* in
the later patch, if the kernel does not support BTF, ARG_PTR_TO_BTF_ID_SOCK_COMMON will behave like ARG_PTR_TO_SOCK_COMMON because no reg->type could have PTR_TO_BTF_ID in this case.
It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ]
--- include/linux/bpf.h | 1 + kernel/bpf/verifier.c | 34 +++++++++++++++++++-- net/core/filter.c | 69 ++++++++++++++++++++++++++++++------------- 3 files changed, 82 insertions(+), 22 deletions(-)
include/linux/bpf.h +1 -0
@@ -292,6 +292,7 @@ enum bpf_arg_type {ARG_PTR_TO_ALLOC_MEM ,/* pointer to dynamically allocated memory */ ARG_PTR_TO_ALLOC_MEM_OR_NULL ,/* pointer to dynamically allocated memory or NULL */ ARG_CONST_ALLOC_SIZE_OR_ZERO ,/* number of allocated bytes requested */ +ARG_PTR_TO_BTF_ID_SOCK_COMMON ,/* pointer to in-kernel sock_common or bpf-mirrored bpf_sock */ __BPF_ARG_TYPE_MAX, };
kernel/bpf/verifier.c +32 -2
@@ -486,7 +486,12 @@ static bool is_acquire_function(enum bpf_func_id func_id,static bool is_ptr_cast_function (enum bpf_func_id func_id) {return func_id == BPF_FUNC_tcp_sock || - func_id == BPF_FUNC_sk_fullsock; + func_id == BPF_FUNC_sk_fullsock || + func_id == BPF_FUNC_skc_to_tcp_sock || + func_id == BPF_FUNC_skc_to_tcp6_sock || + func_id == BPF_FUNC_skc_to_udp6_sock || + func_id == BPF_FUNC_skc_to_tcp_timewait_sock || + func_id == BPF_FUNC_skc_to_tcp_request_sock; }/* string representation of 'enum bpf_reg_type' */
@@ -3953,6 +3958,7 @@ static int resolve_map_arg_type(struct bpf_verifier_env *env,struct bpf_reg_types {const enum bpf_reg_type types[10 ]; +u32 *btf_id; };static const struct bpf_reg_types map_key_value_types = {
@@ -3973,6 +3979,17 @@ static const struct bpf_reg_types sock_types = { }, }; +static const struct bpf_reg_types btf_id_sock_common_types = { + .types = { +PTR_TO_SOCK_COMMON , +PTR_TO_SOCKET , +PTR_TO_TCP_SOCK , +PTR_TO_XDP_SOCK , +PTR_TO_BTF_ID , + }, + .btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON ], +}; +static const struct bpf_reg_types mem_types = { .types = {PTR_TO_STACK ,
@@ -4014,6 +4031,7 @@ static const struct bpf_reg_types *compatible_reg_types[__BPF_ARG_TYPE_MAX] = { [ARG_PTR_TO_CTX] = &context_types, [ARG_PTR_TO_CTX_OR_NULL] = &context_types, [ARG_PTR_TO_SOCK_COMMON] = &sock_types, + [ARG_PTR_TO_BTF_ID_SOCK_COMMON] = &btf_id_sock_common_types, [ARG_PTR_TO_SOCKET] = &fullsock_types, [ARG_PTR_TO_SOCKET_OR_NULL] = &fullsock_types, [ARG_PTR_TO_BTF_ID] = &btf_ptr_types,
@@ -4059,6 +4077,14 @@ static int check_reg_type(struct bpf_verifier_env *env, u32 regno, found:if (type ==PTR_TO_BTF_ID ) { +if (!arg_btf_id) { +if (!compatible->btf_id) { +verbose (env,"verifier internal error: missing arg compatible BTF ID\n" ); +return -EFAULT ; + } + arg_btf_id = compatible->btf_id; + } +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *arg_btf_id)) { verbose(env, "R%d is of type %s but %s is expected\n",
@@ -4575,10 +4601,14 @@ static bool check_btf_id_ok(const struct bpf_func_proto *fn) {int i; -for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) +for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) {if (fn->arg_type[i] ==ARG_PTR_TO_BTF_ID && !fn->arg_btf_id[i])return false; +if (fn->arg_type[i] !=ARG_PTR_TO_BTF_ID && fn->arg_btf_id[i]) +return false; + } +return true; }
net/core/filter.c +49 -20
164 lines not on this page · raw message
Signature · 1 line
2.24.1
Quoted 159 lines · Martin KaFai Lau
There is a constant need to add more fields into the
bpf_tcp_sockfor the bpf programs running at tc, sock_ops...etc.A current workaround could be to use
bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to dobpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from thetcp_sock.This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose
func_protoreturns abtf_id. For example, thefunc_protoofbpf_skc_to_tcp_sockreturns thebtf_idof the kernel "structtcp_sock".These helpers are also added to
is_ptr_cast_function().
It ensures the returning reg (BPF_REF_0) will also carries theref_obj_id. That will keep the ref-tracking works properly.The bpf_skc_to_* helpers are made available to most of the bpf prog types in
filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap.This patch adds a
ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting
this arg can accept a btf-id-ptr (PTR_TO_BTF_ID+ &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to takeARG_PTR_TO_BTF_ID_SOCK_COMMONsuch that
they will accept pointer obtained fromskb->sk.Instead of specifying both
arg_typeandarg_btf_idin the samefunc_protowhich is how the currentARG_PTR_TO_BTF_IDdoes, thearg_btf_idof the newARG_PTR_TO_BTF_ID_SOCK_COMMONis specified in the compatible_reg_types[] inverifier.c. The reason is thearg_btf_idis always the same. Discussion in this thread:
https://lore.kernel.org/bpf/[email protected]/The
ARG_PTR_TO_BTF_ID_part gives a clear expectation that the helper is expecting aPTR_TO_BTF_IDwhich could be NULL. This is the same behavior as the existing helper takingARG_PTR_TO_BTF_ID.The
_SOCK_COMMONpart means the helper is also expecting the legacySOCK_COMMONpointer.By excluding the
_OR_NULLpart, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g.bpf_skc_to_tcp_sock(NULL)will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load.[
ARG_PTR_TO_BTF_ID_SOCK_COMMONwill be used to replace
ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take thePTR_TO_BTF_IDreturned by the bpf_skc_to_*() helpers.The only special case is
bpf_sk_lookup_assign()which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renamingARG_PTR_TO_SOCKET_OR_NULLtoARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ][ When converting the older helpers that take ARG_PTR_TO_SOCK* in
the later patch, if the kernel does not support BTF,ARG_PTR_TO_BTF_ID_SOCK_COMMONwill behave likeARG_PTR_TO_SOCK_COMMONbecause noreg->typecould havePTR_TO_BTF_IDin this case.It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ]
Signed-off-by Martin KaFai Lau <[email protected]>--- include/linux/bpf.h | 1 + kernel/bpf/verifier.c | 34 +++++++++++++++++++-- net/core/filter.c | 69 ++++++++++++++++++++++++++++++------------- 3 files changed, 82 insertions(+), 22 deletions(-)include/linux/bpf.h +1
-0@@ -292,6 +292,7 @@ enum bpf_arg_type {ARG_PTR_TO_ALLOC_MEM ,/* pointer to dynamically allocated memory */ ARG_PTR_TO_ALLOC_MEM_OR_NULL ,/* pointer to dynamically allocated memory or NULL */ ARG_CONST_ALLOC_SIZE_OR_ZERO ,/* number of allocated bytes requested */ +ARG_PTR_TO_BTF_ID_SOCK_COMMON ,/* pointer to in-kernel sock_common or bpf-mirrored bpf_sock */ __BPF_ARG_TYPE_MAX, };kernel/bpf/verifier.c +27
-1@@ -486,7 +486,12 @@ static bool is_acquire_function(enum bpf_func_id func_id,static bool is_ptr_cast_function (enum bpf_func_id func_id) {return func_id == BPF_FUNC_tcp_sock || - func_id == BPF_FUNC_sk_fullsock; + func_id == BPF_FUNC_sk_fullsock || + func_id == BPF_FUNC_skc_to_tcp_sock || + func_id == BPF_FUNC_skc_to_tcp6_sock || + func_id == BPF_FUNC_skc_to_udp6_sock || + func_id == BPF_FUNC_skc_to_tcp_timewait_sock || + func_id == BPF_FUNC_skc_to_tcp_request_sock; }/* string representation of 'enum bpf_reg_type' */ @@ -3953,6 +3958,7 @@ static int resolve_map_arg_type(struct bpf_verifier_env *env,struct bpf_reg_types {const enum bpf_reg_type types[10 ]; +u32 *btf_id; };static const struct bpf_reg_types map_key_value_types = {@@ -3973,6 +3979,17 @@ static const struct bpf_reg_types sock_types = { }, }; +static const struct bpf_reg_types btf_id_sock_common_types = { + .types = { +PTR_TO_SOCK_COMMON , +PTR_TO_SOCKET , +PTR_TO_TCP_SOCK , +PTR_TO_XDP_SOCK , +PTR_TO_BTF_ID , + }, + .btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON ], +}; +static const struct bpf_reg_types mem_types = { .types = {PTR_TO_STACK ,@@ -4014,6 +4031,7 @@ static const struct bpf_reg_types *compatible_reg_types[__BPF_ARG_TYPE_MAX] = { [ARG_PTR_TO_CTX] = &context_types, [ARG_PTR_TO_CTX_OR_NULL] = &context_types, [ARG_PTR_TO_SOCK_COMMON] = &sock_types, + [ARG_PTR_TO_BTF_ID_SOCK_COMMON] = &btf_id_sock_common_types, [ARG_PTR_TO_SOCKET] = &fullsock_types, [ARG_PTR_TO_SOCKET_OR_NULL] = &fullsock_types, [ARG_PTR_TO_BTF_ID] = &btf_ptr_types,@@ -4059,6 +4077,14 @@ static int check_reg_type(struct bpf_verifier_env *env, u32 regno, found:if (type ==PTR_TO_BTF_ID ) { +if (!arg_btf_id) { +if (!compatible->btf_id) { +verbose (env,"verifier internal error: missing arg compatible BTF ID\n" ); +return -EFAULT ; + } + arg_btf_id = compatible->btf_id; + } +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *arg_btf_id)) { verbose(env, "R%d is of type %s but %s is expected\n",@@ -4575,10 +4601,14 @@ static bool check_btf_id_ok(const struct bpf_func_proto *fn) {int i;
kernel/bpf/verifier.c static bool check_btf_id_ok(const struct bpf_func_proto *fn) · line 4611
Quoted 10 lines
kernel/bpf/verifier.c +5
-1-for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) +for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) {if (fn->arg_type[i] ==ARG_PTR_TO_BTF_ID && !fn->arg_btf_id[i])return false; +if (fn->arg_type[i] !=ARG_PTR_TO_BTF_ID && fn->arg_btf_id[i]) +return false; + } +
This is a hold over from the previous patchset?
Quoted 190 lines
kernel/bpf/verifier.c +0
-0return true; }net/core/filter.c +49
-21@@ -77,6 +77,9 @@#include <net/transp_v6.h> #include <linux/btf_ids.h> +static const struct bpf_func_proto * +bpf_sk_base_func_proto (enum bpf_func_id func_id); +int copy_bpf_fprog_from_user (struct sock_fprog *dst,sockptr_t src,int len) {if (in_compat_syscall ()) {@@ -6620,7 +6623,7 @@ sock_addr_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)return NULL ; }default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -6639,7 +6642,7 @@ sk_filter_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)case BPF_FUNC_perf_event_output:return &bpf_skb_event_output_proto;default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -6800,7 +6803,7 @@ tc_cls_act_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)return &bpf_sk_assign_proto;#endif default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -6841,7 +6844,7 @@ xdp_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)return &bpf_tcp_gen_syncookie_proto;#endif default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -6883,7 +6886,7 @@ sock_ops_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)return &bpf_tcp_sock_proto;#endif /* CONFIG_INET */ default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -6929,7 +6932,7 @@ sk_msg_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)return &bpf_get_cgroup_classid_curr_proto;#endif default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -6971,7 +6974,7 @@ sk_skb_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)return &bpf_skc_lookup_tcp_proto;#endif default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -6982,7 +6985,7 @@ flow_dissector_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)case BPF_FUNC_skb_load_bytes:return &bpf_flow_dissector_load_bytes_proto;default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -7009,7 +7012,7 @@ lwt_out_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)case BPF_FUNC_skb_under_cgroup:return &bpf_skb_under_cgroup_proto;default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -9746,7 +9749,7 @@ sk_lookup_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)case BPF_FUNC_sk_release:return &bpf_sk_release_proto;default : -return bpf_base_func_proto (func_id); +return bpf_sk_base_func_proto (func_id); } }@@ -9913,8 +9916,7 @@ const struct bpf_func_proto bpf_skc_to_tcp6_sock_proto = { .func = bpf_skc_to_tcp6_sock, .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, - .arg1_type = ARG_PTR_TO_BTF_ID, - .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_TCP6], };@@ -9930,8 +9932,7 @@ const struct bpf_func_proto bpf_skc_to_tcp_sock_proto = { .func = bpf_skc_to_tcp_sock, .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, - .arg1_type = ARG_PTR_TO_BTF_ID, - .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_TCP], };@@ -9954,8 +9955,7 @@ const struct bpf_func_proto bpf_skc_to_tcp_timewait_sock_proto = { .func = bpf_skc_to_tcp_timewait_sock, .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, - .arg1_type = ARG_PTR_TO_BTF_ID, - .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_TCP_TW], };@@ -9978,8 +9978,7 @@ const struct bpf_func_proto bpf_skc_to_tcp_request_sock_proto = { .func = bpf_skc_to_tcp_request_sock, .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, - .arg1_type = ARG_PTR_TO_BTF_ID, - .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_TCP_REQ], };@@ -10000,7 +9999,37 @@ const struct bpf_func_proto bpf_skc_to_udp6_sock_proto = { .func = bpf_skc_to_udp6_sock, .gpl_only = false, .ret_type = RET_PTR_TO_BTF_ID_OR_NULL, - .arg1_type = ARG_PTR_TO_BTF_ID, - .arg1_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .ret_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_UDP6], }; + +static const struct bpf_func_proto * +bpf_sk_base_func_proto (enum bpf_func_id func_id) +{ +const struct bpf_func_proto *func; + +switch (func_id) { +case BPF_FUNC_skc_to_tcp6_sock: + func = &bpf_skc_to_tcp6_sock_proto; +break ; +case BPF_FUNC_skc_to_tcp_sock: + func = &bpf_skc_to_tcp_sock_proto; +break ; +case BPF_FUNC_skc_to_tcp_timewait_sock: + func = &bpf_skc_to_tcp_timewait_sock_proto; +break ; +case BPF_FUNC_skc_to_tcp_request_sock: + func = &bpf_skc_to_tcp_request_sock_proto; +break ; +case BPF_FUNC_skc_to_udp6_sock: + func = &bpf_skc_to_udp6_sock_proto; +break ; +default : +return bpf_base_func_proto (func_id); + } + +if (!perfmon_capable ()) +return NULL ; + +return func; +} --2.24.1
Signature · 4 lines
Lorenz Bauer | Systems Engineer 6th Floor, County Hall/The Riverside Building, SE1 7PB, UK www.cloudflare.com
Quoted 166 lines · Lorenz Bauer
Quoted 165 lines · Martin KaFai Lau
There is a constant need to add more fields into the
bpf_tcp_sockfor the bpf programs running at tc, sock_ops...etc.A current workaround could be to use
bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to dobpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from thetcp_sock.This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose
func_protoreturns abtf_id. For example, thefunc_protoofbpf_skc_to_tcp_sockreturns thebtf_idof the kernel "structtcp_sock".These helpers are also added to
is_ptr_cast_function().
It ensures the returning reg (BPF_REF_0) will also carries theref_obj_id. That will keep the ref-tracking works properly.The bpf_skc_to_* helpers are made available to most of the bpf prog types in
filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap.This patch adds a
ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting
this arg can accept a btf-id-ptr (PTR_TO_BTF_ID+ &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to takeARG_PTR_TO_BTF_ID_SOCK_COMMONsuch that
they will accept pointer obtained fromskb->sk.Instead of specifying both
arg_typeandarg_btf_idin the samefunc_protowhich is how the currentARG_PTR_TO_BTF_IDdoes, thearg_btf_idof the newARG_PTR_TO_BTF_ID_SOCK_COMMONis specified in the compatible_reg_types[] inverifier.c. The reason is thearg_btf_idis always the same. Discussion in this thread:
https://lore.kernel.org/bpf/[email protected]/The
ARG_PTR_TO_BTF_ID_part gives a clear expectation that the helper is expecting aPTR_TO_BTF_IDwhich could be NULL. This is the same behavior as the existing helper takingARG_PTR_TO_BTF_ID.The
_SOCK_COMMONpart means the helper is also expecting the legacySOCK_COMMONpointer.By excluding the
_OR_NULLpart, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g.bpf_skc_to_tcp_sock(NULL)will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load.[
ARG_PTR_TO_BTF_ID_SOCK_COMMONwill be used to replace
ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take thePTR_TO_BTF_IDreturned by the bpf_skc_to_*() helpers.The only special case is
bpf_sk_lookup_assign()which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renamingARG_PTR_TO_SOCKET_OR_NULLtoARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ][ When converting the older helpers that take ARG_PTR_TO_SOCK* in
the later patch, if the kernel does not support BTF,ARG_PTR_TO_BTF_ID_SOCK_COMMONwill behave likeARG_PTR_TO_SOCK_COMMONbecause noreg->typecould havePTR_TO_BTF_IDin this case.It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ]
Signed-off-by Martin KaFai Lau <[email protected]>--- include/linux/bpf.h | 1 + kernel/bpf/verifier.c | 34 +++++++++++++++++++-- net/core/filter.c | 69 ++++++++++++++++++++++++++++++------------- 3 files changed, 82 insertions(+), 22 deletions(-)include/linux/bpf.h +1
-0@@ -292,6 +292,7 @@ enum bpf_arg_type {ARG_PTR_TO_ALLOC_MEM ,/* pointer to dynamically allocated memory */ ARG_PTR_TO_ALLOC_MEM_OR_NULL ,/* pointer to dynamically allocated memory or NULL */ ARG_CONST_ALLOC_SIZE_OR_ZERO ,/* number of allocated bytes requested */ +ARG_PTR_TO_BTF_ID_SOCK_COMMON ,/* pointer to in-kernel sock_common or bpf-mirrored bpf_sock */ __BPF_ARG_TYPE_MAX, };kernel/bpf/verifier.c +28
-2@@ -486,7 +486,12 @@ static bool is_acquire_function(enum bpf_func_id func_id,static bool is_ptr_cast_function (enum bpf_func_id func_id) {return func_id == BPF_FUNC_tcp_sock || - func_id == BPF_FUNC_sk_fullsock; + func_id == BPF_FUNC_sk_fullsock || + func_id == BPF_FUNC_skc_to_tcp_sock || + func_id == BPF_FUNC_skc_to_tcp6_sock || + func_id == BPF_FUNC_skc_to_udp6_sock || + func_id == BPF_FUNC_skc_to_tcp_timewait_sock || + func_id == BPF_FUNC_skc_to_tcp_request_sock; }/* string representation of 'enum bpf_reg_type' */ @@ -3953,6 +3958,7 @@ static int resolve_map_arg_type(struct bpf_verifier_env *env,struct bpf_reg_types {const enum bpf_reg_type types[10 ]; +u32 *btf_id; };static const struct bpf_reg_types map_key_value_types = {@@ -3973,6 +3979,17 @@ static const struct bpf_reg_types sock_types = { }, }; +static const struct bpf_reg_types btf_id_sock_common_types = { + .types = { +PTR_TO_SOCK_COMMON , +PTR_TO_SOCKET , +PTR_TO_TCP_SOCK , +PTR_TO_XDP_SOCK , +PTR_TO_BTF_ID , + }, + .btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON ], +}; +static const struct bpf_reg_types mem_types = { .types = {PTR_TO_STACK ,@@ -4014,6 +4031,7 @@ static const struct bpf_reg_types *compatible_reg_types[__BPF_ARG_TYPE_MAX] = { [ARG_PTR_TO_CTX] = &context_types, [ARG_PTR_TO_CTX_OR_NULL] = &context_types, [ARG_PTR_TO_SOCK_COMMON] = &sock_types, + [ARG_PTR_TO_BTF_ID_SOCK_COMMON] = &btf_id_sock_common_types, [ARG_PTR_TO_SOCKET] = &fullsock_types, [ARG_PTR_TO_SOCKET_OR_NULL] = &fullsock_types, [ARG_PTR_TO_BTF_ID] = &btf_ptr_types,@@ -4059,6 +4077,14 @@ static int check_reg_type(struct bpf_verifier_env *env, u32 regno, found:if (type ==PTR_TO_BTF_ID ) { +if (!arg_btf_id) { +if (!compatible->btf_id) { +verbose (env,"verifier internal error: missing arg compatible BTF ID\n" ); +return -EFAULT ; + } + arg_btf_id = compatible->btf_id; + } +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *arg_btf_id)) { verbose(env, "R%d is of type %s but %s is expected\n",@@ -4575,10 +4601,14 @@ static bool check_btf_id_ok(const struct bpf_func_proto *fn) {int i; -for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) +for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) {if (fn->arg_type[i] ==ARG_PTR_TO_BTF_ID && !fn->arg_btf_id[i])return false;
Quoted 6 lines
kernel/bpf/verifier.c static bool check_btf_id_ok(const struct bpf_func_proto *fn) · line 4611
Quoted 4 lines
kernel/bpf/verifier.c +4
-0+if (fn->arg_type[i] !=ARG_PTR_TO_BTF_ID && fn->arg_btf_id[i]) +return false; + } +This is a hold over from the previous patchset?
hmm... what do you mean?
Quoted 168 lines · Martin KaFai Lau
Quoted 166 lines · Lorenz Bauer
Quoted 165 lines · Martin KaFai Lau
There is a constant need to add more fields into the
bpf_tcp_sockfor the bpf programs running at tc, sock_ops...etc.A current workaround could be to use
bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to dobpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from thetcp_sock.This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose
func_protoreturns abtf_id. For example, thefunc_protoofbpf_skc_to_tcp_sockreturns thebtf_idof the kernel "structtcp_sock".These helpers are also added to
is_ptr_cast_function().
It ensures the returning reg (BPF_REF_0) will also carries theref_obj_id. That will keep the ref-tracking works properly.The bpf_skc_to_* helpers are made available to most of the bpf prog types in
filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap.This patch adds a
ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting
this arg can accept a btf-id-ptr (PTR_TO_BTF_ID+ &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to takeARG_PTR_TO_BTF_ID_SOCK_COMMONsuch that
they will accept pointer obtained fromskb->sk.Instead of specifying both
arg_typeandarg_btf_idin the samefunc_protowhich is how the currentARG_PTR_TO_BTF_IDdoes, thearg_btf_idof the newARG_PTR_TO_BTF_ID_SOCK_COMMONis specified in the compatible_reg_types[] inverifier.c. The reason is thearg_btf_idis always the same. Discussion in this thread:
https://lore.kernel.org/bpf/[email protected]/The
ARG_PTR_TO_BTF_ID_part gives a clear expectation that the helper is expecting aPTR_TO_BTF_IDwhich could be NULL. This is the same behavior as the existing helper takingARG_PTR_TO_BTF_ID.The
_SOCK_COMMONpart means the helper is also expecting the legacySOCK_COMMONpointer.By excluding the
_OR_NULLpart, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g.bpf_skc_to_tcp_sock(NULL)will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load.[
ARG_PTR_TO_BTF_ID_SOCK_COMMONwill be used to replace
ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take thePTR_TO_BTF_IDreturned by the bpf_skc_to_*() helpers.The only special case is
bpf_sk_lookup_assign()which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renamingARG_PTR_TO_SOCKET_OR_NULLtoARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ][ When converting the older helpers that take ARG_PTR_TO_SOCK* in
the later patch, if the kernel does not support BTF,ARG_PTR_TO_BTF_ID_SOCK_COMMONwill behave likeARG_PTR_TO_SOCK_COMMONbecause noreg->typecould havePTR_TO_BTF_IDin this case.It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ]
Signed-off-by Martin KaFai Lau <[email protected]>--- include/linux/bpf.h | 1 + kernel/bpf/verifier.c | 34 +++++++++++++++++++-- net/core/filter.c | 69 ++++++++++++++++++++++++++++++------------- 3 files changed, 82 insertions(+), 22 deletions(-)include/linux/bpf.h +1
-0@@ -292,6 +292,7 @@ enum bpf_arg_type {ARG_PTR_TO_ALLOC_MEM ,/* pointer to dynamically allocated memory */ ARG_PTR_TO_ALLOC_MEM_OR_NULL ,/* pointer to dynamically allocated memory or NULL */ ARG_CONST_ALLOC_SIZE_OR_ZERO ,/* number of allocated bytes requested */ +ARG_PTR_TO_BTF_ID_SOCK_COMMON ,/* pointer to in-kernel sock_common or bpf-mirrored bpf_sock */ __BPF_ARG_TYPE_MAX, };kernel/bpf/verifier.c +28
-2@@ -486,7 +486,12 @@ static bool is_acquire_function(enum bpf_func_id func_id,static bool is_ptr_cast_function (enum bpf_func_id func_id) {return func_id == BPF_FUNC_tcp_sock || - func_id == BPF_FUNC_sk_fullsock; + func_id == BPF_FUNC_sk_fullsock || + func_id == BPF_FUNC_skc_to_tcp_sock || + func_id == BPF_FUNC_skc_to_tcp6_sock || + func_id == BPF_FUNC_skc_to_udp6_sock || + func_id == BPF_FUNC_skc_to_tcp_timewait_sock || + func_id == BPF_FUNC_skc_to_tcp_request_sock; }/* string representation of 'enum bpf_reg_type' */ @@ -3953,6 +3958,7 @@ static int resolve_map_arg_type(struct bpf_verifier_env *env,struct bpf_reg_types {const enum bpf_reg_type types[10 ]; +u32 *btf_id; };static const struct bpf_reg_types map_key_value_types = {@@ -3973,6 +3979,17 @@ static const struct bpf_reg_types sock_types = { }, }; +static const struct bpf_reg_types btf_id_sock_common_types = { + .types = { +PTR_TO_SOCK_COMMON , +PTR_TO_SOCKET , +PTR_TO_TCP_SOCK , +PTR_TO_XDP_SOCK , +PTR_TO_BTF_ID , + }, + .btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON ], +}; +static const struct bpf_reg_types mem_types = { .types = {PTR_TO_STACK ,@@ -4014,6 +4031,7 @@ static const struct bpf_reg_types *compatible_reg_types[__BPF_ARG_TYPE_MAX] = { [ARG_PTR_TO_CTX] = &context_types, [ARG_PTR_TO_CTX_OR_NULL] = &context_types, [ARG_PTR_TO_SOCK_COMMON] = &sock_types, + [ARG_PTR_TO_BTF_ID_SOCK_COMMON] = &btf_id_sock_common_types, [ARG_PTR_TO_SOCKET] = &fullsock_types, [ARG_PTR_TO_SOCKET_OR_NULL] = &fullsock_types, [ARG_PTR_TO_BTF_ID] = &btf_ptr_types,@@ -4059,6 +4077,14 @@ static int check_reg_type(struct bpf_verifier_env *env, u32 regno, found:if (type ==PTR_TO_BTF_ID ) { +if (!arg_btf_id) { +if (!compatible->btf_id) { +verbose (env,"verifier internal error: missing arg compatible BTF ID\n" ); +return -EFAULT ; + } + arg_btf_id = compatible->btf_id; + } +if (!btf_struct_ids_match (&env->log, reg->off, reg->btf_id, *arg_btf_id)) { verbose(env, "R%d is of type %s but %s is expected\n",@@ -4575,10 +4601,14 @@ static bool check_btf_id_ok(const struct bpf_func_proto *fn) {int i; -for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) +for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) {if (fn->arg_type[i] ==ARG_PTR_TO_BTF_ID && !fn->arg_btf_id[i])return false;
Quoted 7 lines
Quoted 6 lines
kernel/bpf/verifier.c static bool check_btf_id_ok(const struct bpf_func_proto *fn) · line 4611
Quoted 4 lines
kernel/bpf/verifier.c +4
-0+if (fn->arg_type[i] !=ARG_PTR_TO_BTF_ID && fn->arg_btf_id[i]) +return false; + } +This is a hold over from the previous patchset?
hmm... what do you mean?
Sorry, I misread the patch!
Signature · 4 lines
Lorenz Bauer | Systems Engineer 6th Floor, County Hall/The Riverside Building, SE1 7PB, UK www.cloudflare.com
Quoted 5 lines · Lorenz Bauer
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
kernel/bpf/verifier.c +1
-1-for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) +for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) {if (fn->arg_type[i] ==ARG_PTR_TO_BTF_ID && !fn->arg_btf_id[i])return false;
Quoted 7 lines
Quoted 6 lines
Quoted 5 lines
kernel/bpf/verifier.c static bool check_btf_id_ok(const struct bpf_func_proto *fn) · line 4611
Quoted 4 lines
kernel/bpf/verifier.c +4
-0+if (fn->arg_type[i] !=ARG_PTR_TO_BTF_ID && fn->arg_btf_id[i]) +return false; + } +This is a hold over from the previous patchset?
hmm... what do you mean?
Sorry, I misread the patch!
Folks, please trim your replies.
You could have quoted just few lines above instead of most of the patch. Scrolling takes time for those of us who used tbird, mutt, etc.
Quoted 65 lines · Martin KaFai Lau
There is a constant need to add more fields into the
bpf_tcp_sockfor the bpf programs running at tc, sock_ops...etc.A current workaround could be to use
bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to dobpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from thetcp_sock.This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose
func_protoreturns abtf_id. For example, thefunc_protoofbpf_skc_to_tcp_sockreturns thebtf_idof the kernel "structtcp_sock".These helpers are also added to
is_ptr_cast_function().
It ensures the returning reg (BPF_REF_0) will also carries theref_obj_id. That will keep the ref-tracking works properly.The bpf_skc_to_* helpers are made available to most of the bpf prog types in
filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap.This patch adds a
ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting
this arg can accept a btf-id-ptr (PTR_TO_BTF_ID+ &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to takeARG_PTR_TO_BTF_ID_SOCK_COMMONsuch that
they will accept pointer obtained fromskb->sk.Instead of specifying both
arg_typeandarg_btf_idin the samefunc_protowhich is how the currentARG_PTR_TO_BTF_IDdoes, thearg_btf_idof the newARG_PTR_TO_BTF_ID_SOCK_COMMONis specified in the compatible_reg_types[] inverifier.c. The reason is thearg_btf_idis always the same. Discussion in this thread:
https://lore.kernel.org/bpf/[email protected]/The
ARG_PTR_TO_BTF_ID_part gives a clear expectation that the helper is expecting aPTR_TO_BTF_IDwhich could be NULL. This is the same behavior as the existing helper takingARG_PTR_TO_BTF_ID.The
_SOCK_COMMONpart means the helper is also expecting the legacySOCK_COMMONpointer.By excluding the
_OR_NULLpart, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g.bpf_skc_to_tcp_sock(NULL)will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load.[
ARG_PTR_TO_BTF_ID_SOCK_COMMONwill be used to replace
ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take thePTR_TO_BTF_IDreturned by the bpf_skc_to_*() helpers.The only special case is
bpf_sk_lookup_assign()which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renamingARG_PTR_TO_SOCKET_OR_NULLtoARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ][ When converting the older helpers that take ARG_PTR_TO_SOCK* in
the later patch, if the kernel does not support BTF,ARG_PTR_TO_BTF_ID_SOCK_COMMONwill behave likeARG_PTR_TO_SOCK_COMMONbecause noreg->typecould havePTR_TO_BTF_IDin this case.
Quoted 6 lines
It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ]
Signed-off-by Martin KaFai Lau <[email protected]>---
LGTM it took a bit of looking around to convince myself that we have ret_type set to PTR_TO_SOCK_*_OR_NULL types in the sk lookup helpers so that we force a null check before passing these into the skc_to_* helpers here, but I didn't see any holes. Thanks.
kernel/bpf/verifier.c static bool check_btf_id_ok(const struct bpf_func_proto *fn) · line 4611
Quoted 13 lines
kernel/bpf/verifier.c +5
-1@@ -4575,10 +4601,14 @@ static bool check_btf_id_ok(const struct bpf_func_proto *fn) {int i; -for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) +for (i =0 ; i <ARRAY_SIZE (fn->arg_type); i++) {if (fn->arg_type[i] ==ARG_PTR_TO_BTF_ID && !fn->arg_btf_id[i])return false; +if (fn->arg_type[i] !=ARG_PTR_TO_BTF_ID && fn->arg_btf_id[i]) +return false; + } +
I guess this case is harmless? If some other arg has a btf_id its setup wrong, so nice to fail here I think.
Quoted 3 lines
kernel/bpf/verifier.c +0
-0return true; }
PATCH v4 3/13 bpf: Change bpf_sk_release and bpf_sk_*cgroup_id to accept ARG_PTR_TO_BTF_ID_SOCK_COMMON
In reply to Martin KaFai LauThe previous patch allows the networking bpf prog to use the bpf_skc_to_*() helpers to get a PTR_TO_BTF_ID socket pointer, e.g. "struct tcp_sock *". It allows the bpf prog to read all the fields of the tcp_sock.
This patch changes the bpf_sk_release() and bpf_sk_*cgroup_id() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. For example, the following will work:
sk = bpf_skc_lookup_tcp(skb, tuple, tuplen, BPF_F_CURRENT_NETNS, 0);
if (!sk)
return;
tp = bpf_skc_to_tcp_sock(sk);
if (!tp) {
bpf_sk_release(sk);
return;
}
lsndtime = tp->lsndtime;
/* Pass tp to bpf_sk_release() will also work */
bpf_sk_release(tp);Since PTR_TO_BTF_ID could be NULL, the helper taking ARG_PTR_TO_BTF_ID_SOCK_COMMON has to check for NULL at runtime.
A btf_id of "struct sock" may not always mean a fullsock. Regardless the helper's running context may get a non-fullsock or not, considering fullsock check/handling is pretty cheap, it is better to keep the same verifier expectation on helper that takes ARG_PTR_TO_BTF_ID* will be able to handle the minisock situation. In the bpf_sk_*cgroup_id() case, it will try to get a fullsock by using sk_to_full_sk() as its skb variant bpf_sk"b"_*cgroup_id() has already been doing.
bpf_sk_release can already handle minisock, so nothing special has to be done.
--- include/uapi/linux/bpf.h | 8 ++++---- net/core/filter.c | 30 ++++++++++++++---------------- tools/include/uapi/linux/bpf.h | 8 ++++---- 3 files changed, 22 insertions(+), 24 deletions(-)
include/uapi/linux/bpf.h +4 -4
@@ -2512,7 +2512,7 @@ union bpf_attr {* result is from *reuse*\ **->socks**\ [] using the hash of the * tuple. * -* long bpf_sk_release(struct bpf_sock *sock) +* long bpf_sk_release(void *sock) * Description * Release the reference held by *sock*. *sock* must be a * non-**NULL** pointer that was returned from
@@ -3234,11 +3234,11 @@ union bpf_attr {* * **-EOVERFLOW** if an overflow happened: The same object will be tried again. * -* u64 bpf_sk_cgroup_id(struct bpf_sock *sk) +* u64 bpf_sk_cgroup_id(void *sk) * Description * Return the cgroup v2 id of the socket *sk*. * -* *sk* must be a non-**NULL** pointer to a full socket, e.g. one +* *sk* must be a non-**NULL** pointer to a socket, e.g. one * returned from **bpf_sk_lookup_xxx**\ (), * **bpf_sk_fullsock**\ (), etc. The format of returned id is * same as in **bpf_skb_cgroup_id**\ ().
@@ -3248,7 +3248,7 @@ union bpf_attr {* Return * The id is returned or 0 in case the id could not be retrieved. * -* u64 bpf_sk_ancestor_cgroup_id(struct bpf_sock *sk, int ancestor_level) +* u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level) * Description * Return id of cgroup v2 that is ancestor of cgroup associated * with the *sk* at the *ancestor_level*. The root cgroup is at
net/core/filter.c +14 -16
@@ -4088,18 +4088,17 @@ static inline u64 __bpf_sk_cgroup_id(struct sock *sk) {struct cgroup *cgrp; + sk =sk_to_full_sk (sk); +if (!sk || !sk_fullsock (sk)) +return 0 ; + cgrp =sock_cgroup_ptr (&sk->sk_cgrp_data);return cgroup_id (cgrp); } BPF_CALL_1(bpf_skb_cgroup_id, const struct sk_buff *, skb) { -struct sock *sk =skb_to_full_sk (skb); - -if (!sk || !sk_fullsock (sk)) -return 0 ; - -return __bpf_sk_cgroup_id (sk); +return __bpf_sk_cgroup_id (skb->sk); }static const struct bpf_func_proto bpf_skb_cgroup_id_proto = {
@@ -4115,6 +4114,10 @@ static inline u64 __bpf_sk_ancestor_cgroup_id(struct sock *sk,struct cgroup *ancestor;struct cgroup *cgrp; + sk =sk_to_full_sk (sk); +if (!sk || !sk_fullsock (sk)) +return 0 ; + cgrp =sock_cgroup_ptr (&sk->sk_cgrp_data); ancestor =cgroup_ancestor (cgrp, ancestor_level);if (!ancestor)
@@ -4126,12 +4129,7 @@ static inline u64 __bpf_sk_ancestor_cgroup_id(struct sock *sk, BPF_CALL_2(bpf_skb_ancestor_cgroup_id, const struct sk_buff *, skb, int, ancestor_level) { -struct sock *sk =skb_to_full_sk (skb); - -if (!sk || !sk_fullsock (sk)) -return 0 ; - -return __bpf_sk_ancestor_cgroup_id (sk, ancestor_level); +return __bpf_sk_ancestor_cgroup_id (skb->sk, ancestor_level); }static const struct bpf_func_proto bpf_skb_ancestor_cgroup_id_proto = {
@@ -4151,7 +4149,7 @@ static const struct bpf_func_proto bpf_sk_cgroup_id_proto = { .func = bpf_sk_cgroup_id, .gpl_only = false, .ret_type = RET_INTEGER, - .arg1_type = ARG_PTR_TO_SOCKET, + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, }; BPF_CALL_2(bpf_sk_ancestor_cgroup_id, struct sock *, sk, int, ancestor_level)
@@ -4163,7 +4161,7 @@ static const struct bpf_func_proto bpf_sk_ancestor_cgroup_id_proto = { .func = bpf_sk_ancestor_cgroup_id, .gpl_only = false, .ret_type = RET_INTEGER, - .arg1_type = ARG_PTR_TO_SOCKET, + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .arg2_type = ARG_ANYTHING, };#endif
@@ -5697,7 +5695,7 @@ static const struct bpf_func_proto bpf_sk_lookup_udp_proto = { BPF_CALL_1(bpf_sk_release, struct sock *, sk) { -if (sk_is_refcounted (sk)) +if (sk &&sk_is_refcounted (sk))sock_gen_put (sk);return 0 ; }
@@ -5706,7 +5704,7 @@ static const struct bpf_func_proto bpf_sk_release_proto = { .func = bpf_sk_release, .gpl_only = false, .ret_type = RET_INTEGER, - .arg1_type = ARG_PTR_TO_SOCK_COMMON, + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, }; BPF_CALL_5(bpf_xdp_sk_lookup_udp, struct xdp_buff *, ctx,
tools/include/uapi/linux/bpf.h +4 -4
@@ -2512,7 +2512,7 @@ union bpf_attr {* result is from *reuse*\ **->socks**\ [] using the hash of the * tuple. * -* long bpf_sk_release(struct bpf_sock *sock) +* long bpf_sk_release(void *sock) * Description * Release the reference held by *sock*. *sock* must be a * non-**NULL** pointer that was returned from
@@ -3234,11 +3234,11 @@ union bpf_attr {* * **-EOVERFLOW** if an overflow happened: The same object will be tried again. * -* u64 bpf_sk_cgroup_id(struct bpf_sock *sk) +* u64 bpf_sk_cgroup_id(void *sk) * Description * Return the cgroup v2 id of the socket *sk*. * -* *sk* must be a non-**NULL** pointer to a full socket, e.g. one +* *sk* must be a non-**NULL** pointer to a socket, e.g. one * returned from **bpf_sk_lookup_xxx**\ (), * **bpf_sk_fullsock**\ (), etc. The format of returned id is * same as in **bpf_skb_cgroup_id**\ ().
@@ -3248,7 +3248,7 @@ union bpf_attr {* Return * The id is returned or 0 in case the id could not be retrieved. * -* u64 bpf_sk_ancestor_cgroup_id(struct bpf_sock *sk, int ancestor_level) +* u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level) * Description * Return id of cgroup v2 that is ancestor of cgroup associated * with the *sk* at the *ancestor_level*. The root cgroup is at
Signature · 1 line
2.24.1
PATCH v4 4/13 bpf: Change bpf_sk_storage_*() to accept ARG_PTR_TO_BTF_ID_SOCK_COMMON
In reply to Martin KaFai LauThis patch changes the bpf_sk_storage_*() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also.
A micro benchmark has been done on a "cgroup_skb/egress" bpf program which does a bpf_sk_storage_get(). It was driven by netperf doing a 4096 connected UDP_STREAM test with 64bytes packet.
The stats from "kernel.bpf_stats_enabled" shows no meaningful difference.
The sk_storage_get_btf_proto, sk_storage_delete_btf_proto, btf_sk_storage_get_proto, and btf_sk_storage_delete_proto are no longer needed, so they are removed.
--- include/net/bpf_sk_storage.h | 2 -- include/uapi/linux/bpf.h | 1 + kernel/bpf/bpf_lsm.c | 4 ++-- net/core/bpf_sk_storage.c | 29 ++++++----------------------- net/ipv4/bpf_tcp_ca.c | 23 ++--------------------- tools/include/uapi/linux/bpf.h | 1 + 6 files changed, 12 insertions(+), 48 deletions(-)
include/net/bpf_sk_storage.h +0 -2
@@ -20,8 +20,6 @@ void bpf_sk_storage_free(struct sock *sk);extern const struct bpf_func_proto bpf_sk_storage_get_proto;extern const struct bpf_func_proto bpf_sk_storage_delete_proto; -extern const struct bpf_func_proto sk_storage_get_btf_proto; -extern const struct bpf_func_proto sk_storage_delete_btf_proto;struct bpf_local_storage_elem ;struct bpf_sk_storage_diag ;
include/uapi/linux/bpf.h +1 -0
@@ -2861,6 +2861,7 @@ union bpf_attr {* 0 on success. * * **-ENOENT** if the bpf-local-storage cannot be found. +* **-EINVAL** if sk is not a fullsock (e.g. a request_sock). * * long bpf_send_signal(u32 sig) * Description
kernel/bpf/bpf_lsm.c +2 -2
@@ -56,9 +56,9 @@ bpf_lsm_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)case BPF_FUNC_inode_storage_delete:return &bpf_inode_storage_delete_proto;case BPF_FUNC_sk_storage_get: -return &sk_storage_get_btf_proto; +return &bpf_sk_storage_get_proto;case BPF_FUNC_sk_storage_delete: -return &sk_storage_delete_btf_proto; +return &bpf_sk_storage_delete_proto;default :return tracing_prog_func_proto (func_id, prog); }
net/core/bpf_sk_storage.c +6 -23
@@ -269,7 +269,7 @@ BPF_CALL_4(bpf_sk_storage_get, struct bpf_map *, map, struct sock *, sk, {struct bpf_local_storage_data *sdata; -if (flags >BPF_SK_STORAGE_GET_F_CREATE ) +if (!sk || !sk_fullsock (sk) || flags >BPF_SK_STORAGE_GET_F_CREATE )return (unsigned long )NULL ; sdata =sk_storage_lookup (sk, map, true);
@@ -299,6 +299,9 @@ BPF_CALL_4(bpf_sk_storage_get, struct bpf_map *, map, struct sock *, sk, BPF_CALL_2(bpf_sk_storage_delete, struct bpf_map *, map, struct sock *, sk) { +if (!sk || !sk_fullsock (sk)) +return -EINVAL ; +if (refcount_inc_not_zero (&sk->sk_refcnt)) {int err;
@@ -355,7 +358,7 @@ const struct bpf_func_proto bpf_sk_storage_get_proto = { .gpl_only = false, .ret_type = RET_PTR_TO_MAP_VALUE_OR_NULL, .arg1_type = ARG_CONST_MAP_PTR, - .arg2_type = ARG_PTR_TO_SOCKET, + .arg2_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .arg3_type = ARG_PTR_TO_MAP_VALUE_OR_NULL, .arg4_type = ARG_ANYTHING, };
@@ -375,27 +378,7 @@ const struct bpf_func_proto bpf_sk_storage_delete_proto = { .gpl_only = false, .ret_type = RET_INTEGER, .arg1_type = ARG_CONST_MAP_PTR, - .arg2_type = ARG_PTR_TO_SOCKET, -}; - -const struct bpf_func_proto sk_storage_get_btf_proto = { - .func = bpf_sk_storage_get, - .gpl_only = false, - .ret_type =RET_PTR_TO_MAP_VALUE_OR_NULL , - .arg1_type =ARG_CONST_MAP_PTR , - .arg2_type =ARG_PTR_TO_BTF_ID , - .arg2_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK ], - .arg3_type =ARG_PTR_TO_MAP_VALUE_OR_NULL , - .arg4_type =ARG_ANYTHING , -}; - -const struct bpf_func_proto sk_storage_delete_btf_proto = { - .func = bpf_sk_storage_delete, - .gpl_only = false, - .ret_type =RET_INTEGER , - .arg1_type =ARG_CONST_MAP_PTR , - .arg2_type =ARG_PTR_TO_BTF_ID , - .arg2_btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK ], + .arg2_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, };struct bpf_sk_storage_diag {
net/ipv4/bpf_tcp_ca.c +2 -21
@@ -28,22 +28,6 @@ static u32 unsupported_ops[] = {static const struct btf_type *tcp_sock_type;static u32 tcp_sock_id, sock_id; -static struct bpf_func_proto btf_sk_storage_get_proto__read_mostly ; -static struct bpf_func_proto btf_sk_storage_delete_proto__read_mostly ; - -static void convert_sk_func_proto (struct bpf_func_proto *to,const struct bpf_func_proto *from) -{ -int i; - - *to = *from; -for (i =0 ; i <ARRAY_SIZE (to->arg_type); i++) { -if (to->arg_type[i] ==ARG_PTR_TO_SOCKET ) { - to->arg_type[i] =ARG_PTR_TO_BTF_ID ; - to->arg_btf_id[i] = &tcp_sock_id; - } - } -} -static int bpf_tcp_ca_init (struct btf *btf) {s32 type_id;
@@ -59,9 +43,6 @@ static int bpf_tcp_ca_init(struct btf *btf) tcp_sock_id = type_id; tcp_sock_type =btf_type_by_id (btf, tcp_sock_id); -convert_sk_func_proto (&btf_sk_storage_get_proto, &bpf_sk_storage_get_proto); -convert_sk_func_proto (&btf_sk_storage_delete_proto, &bpf_sk_storage_delete_proto); -return 0 ; }
@@ -188,9 +169,9 @@ bpf_tcp_ca_get_func_proto(enum bpf_func_id func_id,case BPF_FUNC_tcp_send_ack:return &bpf_tcp_send_ack_proto;case BPF_FUNC_sk_storage_get: -return &btf_sk_storage_get_proto; +return &bpf_sk_storage_get_proto;case BPF_FUNC_sk_storage_delete: -return &btf_sk_storage_delete_proto; +return &bpf_sk_storage_delete_proto;default :return bpf_base_func_proto (func_id); }
tools/include/uapi/linux/bpf.h +1 -0
@@ -2861,6 +2861,7 @@ union bpf_attr {* 0 on success. * * **-ENOENT** if the bpf-local-storage cannot be found. +* **-EINVAL** if sk is not a fullsock (e.g. a request_sock). * * long bpf_send_signal(u32 sig) * Description
Signature · 1 line
2.24.1
PATCH v4 5/13 bpf: Change bpf_tcp_*_syncookie to accept ARG_PTR_TO_BTF_ID_SOCK_COMMON
In reply to Martin KaFai LauThis patch changes the bpf_tcp_*_syncookie() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also.
--- include/uapi/linux/bpf.h | 4 ++-- net/core/filter.c | 8 ++++---- tools/include/uapi/linux/bpf.h | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-)
include/uapi/linux/bpf.h +2 -2
@@ -2692,7 +2692,7 @@ union bpf_attr {* result is from *reuse*\ **->socks**\ [] using the hash of the * tuple. * -* long bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) +* long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) * Description * Check whether *iph* and *th* contain a valid SYN cookie ACK for * the listening socket in *sk*.
@@ -2878,7 +2878,7 @@ union bpf_attr {* * **-EAGAIN** if bpf program can try again. * -* s64 bpf_tcp_gen_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) +* s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) * Description * Try to issue a SYN cookie for the packet with corresponding * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*.
net/core/filter.c +4 -4
@@ -6086,7 +6086,7 @@ BPF_CALL_5(bpf_tcp_check_syncookie, struct sock *, sk, void *, iph, u32, iph_lenu32 cookie;int ret; -if (unlikely (th_len <sizeof (*th))) +if (unlikely (!sk || th_len <sizeof (*th)))return -EINVAL ;/* sk_listener() allows TCP_NEW_SYN_RECV, which makes no sense here. */
@@ -6139,7 +6139,7 @@ static const struct bpf_func_proto bpf_tcp_check_syncookie_proto = { .gpl_only = true, .pkt_access = true, .ret_type = RET_INTEGER, - .arg1_type = ARG_PTR_TO_SOCK_COMMON, + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .arg2_type = ARG_PTR_TO_MEM, .arg3_type = ARG_CONST_SIZE, .arg4_type = ARG_PTR_TO_MEM,
@@ -6153,7 +6153,7 @@ BPF_CALL_5(bpf_tcp_gen_syncookie, struct sock *, sk, void *, iph, u32, iph_len,u32 cookie;u16 mss; -if (unlikely (th_len <sizeof (*th) || th_len != th->doff *4 )) +if (unlikely (!sk || th_len <sizeof (*th) || th_len != th->doff *4 ))return -EINVAL ;if (sk->sk_protocol !=IPPROTO_TCP || sk->sk_state !=TCP_LISTEN )
@@ -6208,7 +6208,7 @@ static const struct bpf_func_proto bpf_tcp_gen_syncookie_proto = { .gpl_only = true, /* __cookie_v*_init_sequence() is GPL */ .pkt_access = true, .ret_type = RET_INTEGER, - .arg1_type = ARG_PTR_TO_SOCK_COMMON, + .arg1_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .arg2_type = ARG_PTR_TO_MEM, .arg3_type = ARG_CONST_SIZE, .arg4_type = ARG_PTR_TO_MEM,
tools/include/uapi/linux/bpf.h +2 -2
@@ -2692,7 +2692,7 @@ union bpf_attr {* result is from *reuse*\ **->socks**\ [] using the hash of the * tuple. * -* long bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) +* long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) * Description * Check whether *iph* and *th* contain a valid SYN cookie ACK for * the listening socket in *sk*.
@@ -2878,7 +2878,7 @@ union bpf_attr {* * **-EAGAIN** if bpf program can try again. * -* s64 bpf_tcp_gen_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) +* s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) * Description * Try to issue a SYN cookie for the packet with corresponding * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*.
Signature · 1 line
2.24.1
PATCH v4 6/13 bpf: Change bpf_sk_assign to accept ARG_PTR_TO_BTF_ID_SOCK_COMMON
In reply to Martin KaFai LauThis patch changes the bpf_sk_assign() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also.
The bpf_sk_lookup_assign() is taking ARG_PTR_TO_SOCKET_"OR_NULL". Meaning it specifically takes a literal NULL. ARG_PTR_TO_BTF_ID_SOCK_COMMON does not allow a literal NULL, so another ARG type is required for this purpose and another follow-up patch can be used if there is such need.
--- include/uapi/linux/bpf.h | 2 +- net/core/filter.c | 4 ++-- tools/include/uapi/linux/bpf.h | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-)
include/uapi/linux/bpf.h +1 -1
@@ -3107,7 +3107,7 @@ union bpf_attr {* Return * The id is returned or 0 in case the id could not be retrieved. * -* long bpf_sk_assign(struct sk_buff *skb, struct bpf_sock *sk, u64 flags) +* long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags) * Description * Helper is overloaded depending on BPF program type. This * description applies to **BPF_PROG_TYPE_SCHED_CLS** and
net/core/filter.c +2 -2
@@ -6217,7 +6217,7 @@ static const struct bpf_func_proto bpf_tcp_gen_syncookie_proto = { BPF_CALL_3(bpf_sk_assign, struct sk_buff *, skb, struct sock *, sk, u64, flags) { -if (flags !=0 ) +if (!sk || flags !=0 )return -EINVAL ;if (!skb_at_tc_ingress (skb))return -EOPNOTSUPP ;
@@ -6241,7 +6241,7 @@ static const struct bpf_func_proto bpf_sk_assign_proto = { .gpl_only = false, .ret_type = RET_INTEGER, .arg1_type = ARG_PTR_TO_CTX, - .arg2_type = ARG_PTR_TO_SOCK_COMMON, + .arg2_type = ARG_PTR_TO_BTF_ID_SOCK_COMMON, .arg3_type = ARG_ANYTHING, };
tools/include/uapi/linux/bpf.h +1 -1
@@ -3107,7 +3107,7 @@ union bpf_attr {* Return * The id is returned or 0 in case the id could not be retrieved. * -* long bpf_sk_assign(struct sk_buff *skb, struct bpf_sock *sk, u64 flags) +* long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags) * Description * Helper is overloaded depending on BPF program type. This * description applies to **BPF_PROG_TYPE_SCHED_CLS** and
Signature · 1 line
2.24.1
PATCH v4 7/13 bpf: selftest: Add ref_tracking verifier test for bpf_skc casting
In reply to Martin KaFai LauThe patch tests for:
1. bpf_sk_release() can be called on a tcp_sock btf_id ptr.
2. Ensure the tcp_sock btf_id pointer cannot be used after bpf_sk_release().
--- .../selftests/bpf/verifier/ref_tracking.c | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+)
tools/testing/selftests/bpf/verifier/ref_tracking.c +47 -0
@@ -854,3 +854,50 @@ .errstr = "Unreleased reference", .result = REJECT, }, +{ + "reference tracking: bpf_sk_release(btf_tcp_sock)", + .insns = { +BPF_SK_LOOKUP (sk_lookup_tcp), +BPF_JMP_IMM (BPF_JNE ,BPF_REG_0 ,0 ,1 ), +BPF_EXIT_INSN (), +BPF_MOV64_REG (BPF_REG_6 ,BPF_REG_0 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_skc_to_tcp_sock), +BPF_JMP_IMM (BPF_JNE ,BPF_REG_0 ,0 ,3 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_6 ), +BPF_EMIT_CALL (BPF_FUNC_sk_release), +BPF_EXIT_INSN (), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_sk_release), + BPF_EXIT_INSN(), + }, + .prog_type =BPF_PROG_TYPE_SCHED_CLS , + .result = ACCEPT, + .result_unpriv = REJECT, + .errstr_unpriv = "unknown func", +}, +{ +"reference tracking: use ptr from bpf_skc_to_tcp_sock() after release" , + .insns = { +BPF_SK_LOOKUP (sk_lookup_tcp), +BPF_JMP_IMM (BPF_JNE ,BPF_REG_0 ,0 ,1 ), +BPF_EXIT_INSN (), +BPF_MOV64_REG (BPF_REG_6 ,BPF_REG_0 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_skc_to_tcp_sock), +BPF_JMP_IMM (BPF_JNE ,BPF_REG_0 ,0 ,3 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_6 ), +BPF_EMIT_CALL (BPF_FUNC_sk_release), +BPF_EXIT_INSN (), +BPF_MOV64_REG (BPF_REG_7 ,BPF_REG_0 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_6 ), +BPF_EMIT_CALL (BPF_FUNC_sk_release), +BPF_LDX_MEM (BPF_B ,BPF_REG_0 ,BPF_REG_7 ,0 ), + BPF_EXIT_INSN(), + }, + .prog_type =BPF_PROG_TYPE_SCHED_CLS , + .result = REJECT, + .errstr = "invalid mem access", + .result_unpriv = REJECT, + .errstr_unpriv = "unknown func", +},
Signature · 1 line
2.24.1
Re: [PATCH v4 bpf-next 07/13] bpf: selftest: Add ref_tracking verifier test for bpf_skc casting
Quoted 8 lines · Martin KaFai Lau
The patch tests for:
1.bpf_sk_release()can be called on atcp_sockbtf_idptr.2. Ensure the
tcp_sockbtf_idpointer cannot be used afterbpf_sk_release().Signed-off-by Martin KaFai Lau <[email protected]>
Quoted 62 lines
--- .../selftests/bpf/verifier/ref_tracking.c | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+)tools/testing/selftests/bpf/verifier/ref_tracking.c +47
-1@@ -854,3 +854,50 @@ .errstr = "Unreleased reference", .result = REJECT, }, +{ + "reference tracking: bpf_sk_release(btf_tcp_sock)", + .insns = { +BPF_SK_LOOKUP (sk_lookup_tcp), +BPF_JMP_IMM (BPF_JNE ,BPF_REG_0 ,0 ,1 ), +BPF_EXIT_INSN (), +BPF_MOV64_REG (BPF_REG_6 ,BPF_REG_0 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_skc_to_tcp_sock), +BPF_JMP_IMM (BPF_JNE ,BPF_REG_0 ,0 ,3 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_6 ), +BPF_EMIT_CALL (BPF_FUNC_sk_release), +BPF_EXIT_INSN (), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_sk_release), + BPF_EXIT_INSN(), + }, + .prog_type =BPF_PROG_TYPE_SCHED_CLS , + .result = ACCEPT, + .result_unpriv = REJECT, + .errstr_unpriv = "unknown func", +}, +{ +"reference tracking: use ptr from bpf_skc_to_tcp_sock() after release" , + .insns = { +BPF_SK_LOOKUP (sk_lookup_tcp), +BPF_JMP_IMM (BPF_JNE ,BPF_REG_0 ,0 ,1 ), +BPF_EXIT_INSN (), +BPF_MOV64_REG (BPF_REG_6 ,BPF_REG_0 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_skc_to_tcp_sock), +BPF_JMP_IMM (BPF_JNE ,BPF_REG_0 ,0 ,3 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_6 ), +BPF_EMIT_CALL (BPF_FUNC_sk_release), +BPF_EXIT_INSN (), +BPF_MOV64_REG (BPF_REG_7 ,BPF_REG_0 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_6 ), +BPF_EMIT_CALL (BPF_FUNC_sk_release), +BPF_LDX_MEM (BPF_B ,BPF_REG_0 ,BPF_REG_7 ,0 ), + BPF_EXIT_INSN(), + }, + .prog_type =BPF_PROG_TYPE_SCHED_CLS , + .result = REJECT, + .errstr = "invalid mem access", + .result_unpriv = REJECT, + .errstr_unpriv = "unknown func", +}, --2.24.1
Signature · 4 lines
Lorenz Bauer | Systems Engineer 6th Floor, County Hall/The Riverside Building, SE1 7PB, UK www.cloudflare.com
PATCH v4 8/13 bpf: selftest: Move sock_fields test into test_progs
In reply to Martin KaFai LauThis is a mechanical change to
1. move test_sock_fields.c to prog_tests/sock_fields.c
2. rename progs/test_sock_fields_kern.c to progs/test_sock_fields.c
Minimal change is made to the code itself. Next patch will make changes to use new ways of writing test, e.g. use skel and global variables.
---
tools/testing/selftests/bpf/.gitignore | 1 -
tools/testing/selftests/bpf/Makefile | 2 +-
.../bpf/{test_sock_fields.c => prog_tests/sock_fields.c} | 6 ++----
.../progs/{test_sock_fields_kern.c => test_sock_fields.c} | 0
4 files changed, 3 insertions(+), 6 deletions(-)
rename tools/testing/selftests/bpf/{test_sock_fields.c => prog_tests/sock_fields.c} (99%)
rename tools/testing/selftests/bpf/progs/{test_sock_fields_kern.c => test_sock_fields.c} (100%)tools/testing/selftests/bpf/.gitignore +0 -1
@@ -13,7 +13,6 @@ test_verifier_log feature test_sock test_sock_addr -test_sock_fields urandom_read test_sockmap test_lirc_mode2_user
tools/testing/selftests/bpf/Makefile +1 -1
@@ -35,7 +35,7 @@ TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test test_verifier_log test_dev_cgroup test_tcpbpf_user \ test_sock test_sockmap get_cgroup_id_user test_socket_cookie \ test_cgroup_storage \ - test_netcnt test_tcpnotify_user test_sock_fields test_sysctl \ + test_netcnt test_tcpnotify_user test_sysctl \ test_progs-no_alu32 \ test_current_pid_tgid_new_ns
tools/testing/selftests/bpf/prog_tests/sock_fields.c renamed from tools/testing/selftests/bpf/test_sock_fields.c +2 -4
@@ -409,10 +409,10 @@ static void test(void)check_result (); } -int main (int argc,char **argv) +void test_sock_fields (void ) {struct bpf_prog_load_attr attr = { - .file ="test_sock_fields_kern.o" , + .file ="test_sock_fields.o" , .prog_type =BPF_PROG_TYPE_CGROUP_SKB , .prog_flags =BPF_F_TEST_RND_HI32 , };
@@ -477,6 +477,4 @@ int main(int argc, char **argv)cleanup_cgroup_environment ();printf ("PASS\n" ); - -return 0 ; }
tools/testing/selftests/bpf/progs/test_sock_fields.c renamed from tools/testing/selftests/bpf/progs/test_sock_fields_kern.c +0 -0
Signature · 1 line
2.24.1
PATCH v4 9/13 bpf: selftest: Adapt sock_fields test to use skel and global variables
In reply to Martin KaFai Lauskel is used.
Global variables are used to store the result from bpf prog. addr_map, sock_result_map, and tcp_sock_result_map are gone. Instead, global variables listen_tp, srv_sa6, cli_tp,, srv_tp, listen_sk, srv_sk, and cli_sk are added.
Because of that, bpf_addr_array_idx and bpf_result_array_idx are also no longer needed.
CHECK() macro from test_progs.h is reused and bail as soon as a CHECK failure.
shutdown() is used to ensure the previous data-ack is received. The bytes_acked, bytes_received, and the pkt_out_cnt checks are using "<" to accommodate the final ack may not have been received/sent. It is enough since it is not the focus of this test.
The sk local storage is all initialized to 0xeB9F now, so the check_sk_pkt_out_cnt() always checks with the 0xeB9F base. It is to keep things simple.
The next patch will reuse helpers from network_helpers.h to simplify things further.
--- .../selftests/bpf/prog_tests/sock_fields.c | 380 ++++++++---------- .../selftests/bpf/progs/test_sock_fields.c | 154 +++---- 2 files changed, 229 insertions(+), 305 deletions(-)
tools/testing/selftests/bpf/prog_tests/sock_fields.c +163 -217
@@ -14,20 +14,9 @@#include <bpf/libbpf.h> #include "cgroup_helpers.h" +#include "test_progs.h" #include "bpf_rlimit.h" - -enum bpf_addr_array_idx { -ADDR_SRV_IDX , -ADDR_CLI_IDX , - __NR_BPF_ADDR_ARRAY_IDX, -}; - -enum bpf_result_array_idx { -EGRESS_SRV_IDX , -EGRESS_CLI_IDX , -INGRESS_LISTEN_IDX , - __NR_BPF_RESULT_ARRAY_IDX, -}; +#include "test_sock_fields.skel.h" enum bpf_linum_array_idx {EGRESS_LINUM_IDX ,
@@ -40,34 +29,16 @@ struct bpf_spinlock_cnt {__u32 cnt; }; -#define CHECK(condition, tag, format...) ({ \ - int __ret = !!(condition); \ - if (__ret) { \ - printf("%s(%d):FAIL:%s ", __func__, __LINE__, tag); \ - printf(format); \ - printf("\n"); \ - exit(-1); \ - } \ -}) -#define TEST_CGROUP "/test-bpf-sock-fields"#define DATA "Hello BPF!"#define DATA_LEN sizeof(DATA)static struct sockaddr_in6 srv_sa6, cli_sa6;static int sk_pkt_out_cnt10_fd; +struct test_sock_fields *skel;static int sk_pkt_out_cnt_fd;static int linum_map_fd; -static int addr_map_fd; -static int tp_map_fd; -static int sk_map_fd; - -static __u32 addr_srv_idx =ADDR_SRV_IDX ; -static __u32 addr_cli_idx =ADDR_CLI_IDX ; - -static __u32 egress_srv_idx =EGRESS_SRV_IDX ; -static __u32 egress_cli_idx =EGRESS_CLI_IDX ; -static __u32 ingress_listen_idx =INGRESS_LISTEN_IDX ; +static __u32 duration;static __u32 egress_linum_idx =EGRESS_LINUM_IDX ;static __u32 ingress_linum_idx =INGRESS_LINUM_IDX ;
@@ -79,7 +50,7 @@ static void init_loopback6(struct sockaddr_in6 *sa6) sa6->sin6_addr = in6addr_loopback; } -static void print_sk (const struct bpf_sock *sk) +static void print_sk (const struct bpf_sock *sk,const char *prefix) {char src_ip4[24 ], dst_ip4[24 ];char src_ip6[64 ], dst_ip6[64 ];
@@ -89,9 +60,10 @@ static void print_sk(const struct bpf_sock *sk)inet_ntop (AF_INET , &sk->dst_ip4, dst_ip4,sizeof (dst_ip4));inet_ntop (AF_INET6 , &sk->dst_ip6, dst_ip6,sizeof (dst_ip6)); - printf("state:%u bound_dev_if:%u family:%u type:%u protocol:%u mark:%u priority:%u " + printf("%s: state:%u bound_dev_if:%u family:%u type:%u protocol:%u mark:%u priority:%u " "src_ip4:%x(%s) src_ip6:%x:%x:%x:%x(%s) src_port:%u " "dst_ip4:%x(%s) dst_ip6:%x:%x:%x:%x(%s) dst_port:%u\n", + prefix, sk->state, sk->bound_dev_if, sk->family, sk->type, sk->protocol, sk->mark, sk->priority, sk->src_ip4, src_ip4,
@@ -102,14 +74,15 @@ static void print_sk(const struct bpf_sock *sk) dst_ip6, ntohs(sk->dst_port)); } -static void print_tp (const struct bpf_tcp_sock *tp) +static void print_tp (const struct bpf_tcp_sock *tp,const char *prefix) { - printf("snd_cwnd:%u srtt_us:%u rtt_min:%u snd_ssthresh:%u rcv_nxt:%u " + printf("%s: snd_cwnd:%u srtt_us:%u rtt_min:%u snd_ssthresh:%u rcv_nxt:%u " "snd_nxt:%u snd:una:%u mss_cache:%u ecn_flags:%u " "rate_delivered:%u rate_interval_us:%u packets_out:%u " "retrans_out:%u total_retrans:%u segs_in:%u data_segs_in:%u " "segs_out:%u data_segs_out:%u lost_out:%u sacked_out:%u " "bytes_received:%llu bytes_acked:%llu\n", + prefix, tp->snd_cwnd, tp->srtt_us, tp->rtt_min, tp->snd_ssthresh, tp->rcv_nxt, tp->snd_nxt, tp->snd_una, tp->mss_cache, tp->ecn_flags, tp->rate_delivered, tp->rate_interval_us,
@@ -129,57 +102,26 @@ static void check_result(void) err =bpf_map_lookup_elem (linum_map_fd, &egress_linum_idx, &egress_linum);CHECK (err ==-1 ,"bpf_map_lookup_elem(linum_map_fd)" , -"err:%d errno:%d" , err, errno); +"err:%d errno:%d\n" , err, errno); err =bpf_map_lookup_elem (linum_map_fd, &ingress_linum_idx, &ingress_linum);CHECK (err ==-1 ,"bpf_map_lookup_elem(linum_map_fd)" , -"err:%d errno:%d" , err, errno); - - err =bpf_map_lookup_elem (sk_map_fd, &egress_srv_idx, &srv_sk); -CHECK (err ==-1 ,"bpf_map_lookup_elem(sk_map_fd, &egress_srv_idx)" , -"err:%d errno:%d" , err, errno); - err =bpf_map_lookup_elem (tp_map_fd, &egress_srv_idx, &srv_tp); -CHECK (err ==-1 ,"bpf_map_lookup_elem(tp_map_fd, &egress_srv_idx)" , -"err:%d errno:%d" , err, errno); - - err =bpf_map_lookup_elem (sk_map_fd, &egress_cli_idx, &cli_sk); -CHECK (err ==-1 ,"bpf_map_lookup_elem(sk_map_fd, &egress_cli_idx)" , -"err:%d errno:%d" , err, errno); - err =bpf_map_lookup_elem (tp_map_fd, &egress_cli_idx, &cli_tp); -CHECK (err ==-1 ,"bpf_map_lookup_elem(tp_map_fd, &egress_cli_idx)" , -"err:%d errno:%d" , err, errno); - - err =bpf_map_lookup_elem (sk_map_fd, &ingress_listen_idx, &listen_sk); -CHECK (err ==-1 ,"bpf_map_lookup_elem(sk_map_fd, &ingress_listen_idx)" , -"err:%d errno:%d" , err, errno); - err =bpf_map_lookup_elem (tp_map_fd, &ingress_listen_idx, &listen_tp); -CHECK (err ==-1 ,"bpf_map_lookup_elem(tp_map_fd, &ingress_listen_idx)" , -"err:%d errno:%d" , err, errno); - -printf ("listen_sk: " ); -print_sk (&listen_sk); -printf ("\n" ); - -printf ("srv_sk: " ); -print_sk (&srv_sk); -printf ("\n" ); - -printf ("cli_sk: " ); -print_sk (&cli_sk); -printf ("\n" ); - -printf ("listen_tp: " ); -print_tp (&listen_tp); -printf ("\n" ); - -printf ("srv_tp: " ); -print_tp (&srv_tp); -printf ("\n" ); - -printf ("cli_tp: " ); -print_tp (&cli_tp); -printf ("\n" ); +"err:%d errno:%d\n" , err, errno); + +memcpy (&srv_sk, &skel->bss->srv_sk,sizeof (srv_sk)); +memcpy (&srv_tp, &skel->bss->srv_tp,sizeof (srv_tp)); +memcpy (&cli_sk, &skel->bss->cli_sk,sizeof (cli_sk)); +memcpy (&cli_tp, &skel->bss->cli_tp,sizeof (cli_tp)); +memcpy (&listen_sk, &skel->bss->listen_sk,sizeof (listen_sk)); +memcpy (&listen_tp, &skel->bss->listen_tp,sizeof (listen_tp)); + +print_sk (&listen_sk,"listen_sk" ); +print_sk (&srv_sk,"srv_sk" ); +print_sk (&cli_sk,"cli_sk" ); +print_tp (&listen_tp,"listen_tp" ); +print_tp (&srv_tp,"srv_tp" ); +print_tp (&cli_tp,"cli_tp" ); CHECK(listen_sk.state != 10 || listen_sk.family != AF_INET6 ||
@@ -190,8 +132,8 @@ static void check_result(void) listen_sk.dst_ip6[2 ] || listen_sk.dst_ip6[3 ] || listen_sk.src_port !=ntohs (srv_sa6.sin6_port) || listen_sk.dst_port, -"Unexpected listen_sk" , -"Check listen_sk output. ingress_linum:%u" , +"listen_sk" , +"Unexpected. Check listen_sk output. ingress_linum:%u\n" , ingress_linum); CHECK(srv_sk.state == 10 ||
@@ -204,7 +146,7 @@ static void check_result(void) sizeof(srv_sk.dst_ip6)) || srv_sk.src_port !=ntohs (srv_sa6.sin6_port) || srv_sk.dst_port != cli_sa6.sin6_port, -"Unexpected srv_sk" ,"Check srv_sk output. egress_linum:%u" , +"srv_sk" ,"Unexpected. Check srv_sk output. egress_linum:%u\n" , egress_linum); CHECK(cli_sk.state == 10 ||
@@ -217,30 +159,31 @@ static void check_result(void) sizeof(cli_sk.dst_ip6)) || cli_sk.src_port !=ntohs (cli_sa6.sin6_port) || cli_sk.dst_port != srv_sa6.sin6_port, -"Unexpected cli_sk" ,"Check cli_sk output. egress_linum:%u" , +"cli_sk" ,"Unexpected. Check cli_sk output. egress_linum:%u\n" , egress_linum);CHECK (listen_tp.data_segs_out || listen_tp.data_segs_in || listen_tp.total_retrans || listen_tp.bytes_acked, -"Unexpected listen_tp" ,"Check listen_tp output. ingress_linum:%u" , +"listen_tp" , +"Unexpected. Check listen_tp output. ingress_linum:%u\n" , ingress_linum);CHECK (srv_tp.data_segs_out !=2 || srv_tp.data_segs_in || srv_tp.snd_cwnd !=10 || srv_tp.total_retrans || - srv_tp.bytes_acked !=2 *DATA_LEN , -"Unexpected srv_tp" ,"Check srv_tp output. egress_linum:%u" , + srv_tp.bytes_acked <2 *DATA_LEN , +"srv_tp" ,"Unexpected. Check srv_tp output. egress_linum:%u\n" , egress_linum);CHECK (cli_tp.data_segs_out || cli_tp.data_segs_in !=2 || cli_tp.snd_cwnd !=10 || cli_tp.total_retrans || - cli_tp.bytes_received !=2 *DATA_LEN , -"Unexpected cli_tp" ,"Check cli_tp output. egress_linum:%u" , + cli_tp.bytes_received <2 *DATA_LEN , +"cli_tp" ,"Unexpected. Check cli_tp output. egress_linum:%u\n" , egress_linum); }
@@ -257,15 +200,14 @@ static void check_sk_pkt_out_cnt(int accept_fd, int cli_fd) &pkt_out_cnt10);/* The bpf prog only counts for fullsock and -* passive conneciton did not become fullsock until 3WHS -* had been finished. -* The bpf prog only counted two data packet out but we -* specially init accept_fd's pkt_out_cnt by 2 in -* init_sk_storage(). Hence, 4 here. +* passive connection did not become fullsock until 3WHS +* had been finished, so the bpf prog only counted two data +* packet out. */ -CHECK (err || pkt_out_cnt.cnt !=4 || pkt_out_cnt10.cnt !=40 , +CHECK (err || pkt_out_cnt.cnt <0xeB9F +2 || + pkt_out_cnt10.cnt <0xeB9F +20 ,"bpf_map_lookup_elem(sk_pkt_out_cnt, &accept_fd)" , -"err:%d errno:%d pkt_out_cnt:%u pkt_out_cnt10:%u" , +"err:%d errno:%d pkt_out_cnt:%u pkt_out_cnt10:%u\n" , err, errno, pkt_out_cnt.cnt, pkt_out_cnt10.cnt); pkt_out_cnt.cnt = ~0 ;
@@ -280,14 +222,14 @@ static void check_sk_pkt_out_cnt(int accept_fd, int cli_fd)* * The bpf_prog initialized it to 0xeB9F. */ -CHECK (err || pkt_out_cnt.cnt !=0xeB9F +4 || - pkt_out_cnt10.cnt !=0xeB9F +40 , +CHECK (err || pkt_out_cnt.cnt <0xeB9F +4 || + pkt_out_cnt10.cnt <0xeB9F +40 ,"bpf_map_lookup_elem(sk_pkt_out_cnt, &cli_fd)" , -"err:%d errno:%d pkt_out_cnt:%u pkt_out_cnt10:%u" , +"err:%d errno:%d pkt_out_cnt:%u pkt_out_cnt10:%u\n" , err, errno, pkt_out_cnt.cnt, pkt_out_cnt10.cnt); } -static void init_sk_storage (int sk_fd,__u32 pkt_out_cnt) +static int init_sk_storage (int sk_fd,__u32 pkt_out_cnt) {struct bpf_spinlock_cnt scnt = {};int err;
@@ -295,186 +237,190 @@ static void init_sk_storage(int sk_fd, __u32 pkt_out_cnt) scnt.cnt = pkt_out_cnt; err =bpf_map_update_elem (sk_pkt_out_cnt_fd, &sk_fd, &scnt,BPF_NOEXIST ); -CHECK (err,"bpf_map_update_elem(sk_pkt_out_cnt_fd)" , -"err:%d errno:%d" , err, errno); +if (CHECK (err,"bpf_map_update_elem(sk_pkt_out_cnt_fd)" , +"err:%d errno:%d\n" , err, errno)) +return err; - scnt.cnt *=10 ; err =bpf_map_update_elem (sk_pkt_out_cnt10_fd, &sk_fd, &scnt,BPF_NOEXIST ); -CHECK (err,"bpf_map_update_elem(sk_pkt_out_cnt10_fd)" , -"err:%d errno:%d" , err, errno); +if (CHECK (err,"bpf_map_update_elem(sk_pkt_out_cnt10_fd)" , +"err:%d errno:%d\n" , err, errno)) +return err; + +return 0 ; }static void test (void ) { -int listen_fd, cli_fd, accept_fd, epfd, err; +int listen_fd =-1 , cli_fd =-1 , accept_fd =-1 , epfd, err, i;struct epoll_event ev;socklen_t addrlen; -int i; +char buf[DATA_LEN ]; addrlen =sizeof (struct sockaddr_in6 ); ev.events =EPOLLIN ; epfd =epoll_create (1 ); -CHECK (epfd ==-1 ,"epoll_create()" ,"epfd:%d errno:%d" , epfd, errno); +if (CHECK (epfd ==-1 ,"epoll_create()" ,"epfd:%d errno:%d\n" , + epfd, errno)) +return ;/* Prepare listen_fd */ listen_fd =socket (AF_INET6 ,SOCK_STREAM |SOCK_NONBLOCK ,0 ); -CHECK (listen_fd ==-1 ,"socket()" ,"listen_fd:%d errno:%d" , - listen_fd, errno); +if (CHECK (listen_fd ==-1 ,"socket()" ,"listen_fd:%d errno:%d\n" , + listen_fd, errno)) + goto done;init_loopback6 (&srv_sa6); err =bind (listen_fd, (struct sockaddr *)&srv_sa6,sizeof (srv_sa6)); -CHECK (err,"bind(listen_fd)" ,"err:%d errno:%d" , err, errno); +if (CHECK (err,"bind(listen_fd)" ,"err:%d errno:%d\n" , err, errno)) + goto done; err =getsockname (listen_fd, (struct sockaddr *)&srv_sa6, &addrlen); -CHECK (err,"getsockname(listen_fd)" ,"err:%d errno:%d" , err, errno); +if (CHECK (err,"getsockname(listen_fd)" ,"err:%d errno:%d\n" , err, + errno)) + goto done; +memcpy (&skel->bss->srv_sa6, &srv_sa6,sizeof (srv_sa6)); err =listen (listen_fd,1 ); -CHECK (err,"listen(listen_fd)" ,"err:%d errno:%d" , err, errno); +if (CHECK (err,"listen(listen_fd)" ,"err:%d errno:%d\n" , err, errno)) + goto done;/* Prepare cli_fd */ cli_fd =socket (AF_INET6 ,SOCK_STREAM |SOCK_NONBLOCK ,0 ); -CHECK (cli_fd ==-1 ,"socket()" ,"cli_fd:%d errno:%d" , cli_fd, errno); +if (CHECK (cli_fd ==-1 ,"socket()" ,"cli_fd:%d errno:%d\n" , cli_fd, + errno)) + goto done;init_loopback6 (&cli_sa6); err =bind (cli_fd, (struct sockaddr *)&cli_sa6,sizeof (cli_sa6)); -CHECK (err,"bind(cli_fd)" ,"err:%d errno:%d" , err, errno); +if (CHECK (err,"bind(cli_fd)" ,"err:%d errno:%d\n" , err, errno)) + goto done; err =getsockname (cli_fd, (struct sockaddr *)&cli_sa6, &addrlen); -CHECK (err,"getsockname(cli_fd)" ,"err:%d errno:%d" , - err, errno); - -/* Update addr_map with srv_sa6 and cli_sa6 */ - err =bpf_map_update_elem (addr_map_fd, &addr_srv_idx, &srv_sa6,0 ); -CHECK (err,"map_update" ,"err:%d errno:%d" , err, errno); - - err =bpf_map_update_elem (addr_map_fd, &addr_cli_idx, &cli_sa6,0 ); -CHECK (err,"map_update" ,"err:%d errno:%d" , err, errno); +if (CHECK (err,"getsockname(cli_fd)" ,"err:%d errno:%d\n" , + err, errno)) + goto done;/* Connect from cli_sa6 to srv_sa6 */ err =connect (cli_fd, (struct sockaddr *)&srv_sa6, addrlen);printf ("srv_sa6.sin6_port:%u cli_sa6.sin6_port:%u\n\n" ,ntohs (srv_sa6.sin6_port),ntohs (cli_sa6.sin6_port)); -CHECK (err && errno !=EINPROGRESS , -"connect(cli_fd)" ,"err:%d errno:%d" , err, errno); +if (CHECK (err && errno !=EINPROGRESS , +"connect(cli_fd)" ,"err:%d errno:%d\n" , err, errno)) + goto done; ev.data.fd = listen_fd; err =epoll_ctl (epfd,EPOLL_CTL_ADD , listen_fd, &ev); -CHECK (err,"epoll_ctl(EPOLL_CTL_ADD, listen_fd)" ,"err:%d errno:%d" , - err, errno); +if (CHECK (err,"epoll_ctl(EPOLL_CTL_ADD, listen_fd)" , +"err:%d errno:%d\n" , err, errno)) + goto done;/* Accept the connection */ /* Have some timeout in accept(listen_fd). Just in case. */ err =epoll_wait (epfd, &ev,1 ,1000 ); -CHECK (err !=1 || ev.data.fd != listen_fd, -"epoll_wait(listen_fd)" , -"err:%d errno:%d ev.data.fd:%d listen_fd:%d" , - err, errno, ev.data.fd, listen_fd); +if (CHECK (err !=1 || ev.data.fd != listen_fd, +"epoll_wait(listen_fd)" , +"err:%d errno:%d ev.data.fd:%d listen_fd:%d\n" , + err, errno, ev.data.fd, listen_fd)) + goto done; accept_fd =accept (listen_fd,NULL ,NULL ); -CHECK (accept_fd ==-1 ,"accept(listen_fd)" ,"accept_fd:%d errno:%d" , - accept_fd, errno); -close (listen_fd); +if (CHECK (accept_fd ==-1 ,"accept(listen_fd)" , +"accept_fd:%d errno:%d\n" , + accept_fd, errno)) + goto done; ev.data.fd = cli_fd; err =epoll_ctl (epfd,EPOLL_CTL_ADD , cli_fd, &ev); -CHECK (err,"epoll_ctl(EPOLL_CTL_ADD, cli_fd)" ,"err:%d errno:%d" , - err, errno); +if (CHECK (err,"epoll_ctl(EPOLL_CTL_ADD, cli_fd)" , +"err:%d errno:%d\n" , err, errno)) + goto done; -init_sk_storage (accept_fd,2 ); +if (init_sk_storage (accept_fd,0xeB9F )) + goto done;for (i =0 ; i <2 ; i++) { -/* Send some data from accept_fd to cli_fd */ - err =send (accept_fd,DATA ,DATA_LEN ,0 ); -CHECK (err !=DATA_LEN ,"send(accept_fd)" ,"err:%d errno:%d" , - err, errno); +/* Send some data from accept_fd to cli_fd. +* MSG_EOR to stop kernel from coalescing two pkts. +*/ + err =send (accept_fd,DATA ,DATA_LEN ,MSG_EOR ); +if (CHECK (err !=DATA_LEN ,"send(accept_fd)" , +"err:%d errno:%d\n" , err, errno)) + goto done;/* Have some timeout in recv(cli_fd). Just in case. */ err =epoll_wait (epfd, &ev,1 ,1000 ); -CHECK (err !=1 || ev.data.fd != cli_fd, -"epoll_wait(cli_fd)" ,"err:%d errno:%d ev.data.fd:%d cli_fd:%d" , - err, errno, ev.data.fd, cli_fd); - - err =recv (cli_fd,NULL ,0 ,MSG_TRUNC ); -CHECK (err,"recv(cli_fd)" ,"err:%d errno:%d" , err, errno); +if (CHECK (err !=1 || ev.data.fd != cli_fd, +"epoll_wait(cli_fd)" , +"err:%d errno:%d ev.data.fd:%d cli_fd:%d\n" , + err, errno, ev.data.fd, cli_fd)) + goto done; + + err =recv (cli_fd, buf,DATA_LEN ,0 ); +if (CHECK (err !=DATA_LEN ,"recv(cli_fd)" ,"err:%d errno:%d\n" , + err, errno)) + goto done; } +shutdown (cli_fd,SHUT_WR ); + err =recv (accept_fd, buf,1 ,0 ); +if (CHECK (err,"recv(accept_fd) for fin" ,"err:%d errno:%d\n" , + err, errno)) + goto done; +shutdown (accept_fd,SHUT_WR ); + err =recv (cli_fd, buf,1 ,0 ); +if (CHECK (err,"recv(cli_fd) for fin" ,"err:%d errno:%d\n" , + err, errno)) + goto done;check_sk_pkt_out_cnt (accept_fd, cli_fd); +check_result (); +done: +if (accept_fd !=-1 ) +close (accept_fd); +if (cli_fd !=-1 ) +close (cli_fd); +if (listen_fd !=-1 ) +close (listen_fd);close (epfd); -close (accept_fd); -close (cli_fd); - -check_result (); }void test_sock_fields (void ) { -struct bpf_prog_load_attr attr = { - .file ="test_sock_fields.o" , - .prog_type =BPF_PROG_TYPE_CGROUP_SKB , - .prog_flags =BPF_F_TEST_RND_HI32 , - }; -int cgroup_fd, egress_fd, ingress_fd, err; -struct bpf_program *ingress_prog; -struct bpf_object *obj; -struct bpf_map *map; +struct bpf_link *egress_link =NULL , *ingress_link =NULL ; +int cgroup_fd;/* Create a cgroup, get fd, and join it */ - cgroup_fd =cgroup_setup_and_join (TEST_CGROUP ); -CHECK (cgroup_fd <0 ,"cgroup_setup_and_join()" , -"cgroup_fd:%d errno:%d" , cgroup_fd, errno); -atexit (cleanup_cgroup_environment); - - err =bpf_prog_load_xattr (&attr, &obj, &egress_fd); -CHECK (err,"bpf_prog_load_xattr()" ,"err:%d" , err); - - ingress_prog =bpf_object__find_program_by_title (obj, -"cgroup_skb/ingress" ); -CHECK (!ingress_prog, -"bpf_object__find_program_by_title(cgroup_skb/ingress)" , -"not found" ); - ingress_fd =bpf_program__fd (ingress_prog); - - err =bpf_prog_attach (egress_fd, cgroup_fd,BPF_CGROUP_INET_EGRESS ,0 ); -CHECK (err ==-1 ,"bpf_prog_attach(CPF_CGROUP_INET_EGRESS)" , -"err:%d errno%d" , err, errno); - - err =bpf_prog_attach (ingress_fd, cgroup_fd, -BPF_CGROUP_INET_INGRESS ,0 ); -CHECK (err ==-1 ,"bpf_prog_attach(CPF_CGROUP_INET_INGRESS)" , -"err:%d errno%d" , err, errno); -close (cgroup_fd); - - map =bpf_object__find_map_by_name (obj,"addr_map" ); -CHECK (!map,"cannot find addr_map" ,"(null)" ); - addr_map_fd =bpf_map__fd (map); - - map =bpf_object__find_map_by_name (obj,"sock_result_map" ); -CHECK (!map,"cannot find sock_result_map" ,"(null)" ); - sk_map_fd =bpf_map__fd (map); - - map =bpf_object__find_map_by_name (obj,"tcp_sock_result_map" ); -CHECK (!map,"cannot find tcp_sock_result_map" ,"(null)" ); - tp_map_fd =bpf_map__fd (map); - - map =bpf_object__find_map_by_name (obj,"linum_map" ); -CHECK (!map,"cannot find linum_map" ,"(null)" ); - linum_map_fd =bpf_map__fd (map); - - map =bpf_object__find_map_by_name (obj,"sk_pkt_out_cnt" ); -CHECK (!map,"cannot find sk_pkt_out_cnt" ,"(null)" ); - sk_pkt_out_cnt_fd =bpf_map__fd (map); - - map =bpf_object__find_map_by_name (obj,"sk_pkt_out_cnt10" ); -CHECK (!map,"cannot find sk_pkt_out_cnt10" ,"(null)" ); - sk_pkt_out_cnt10_fd =bpf_map__fd (map); + cgroup_fd =test__join_cgroup (TEST_CGROUP ); +if (CHECK_FAIL (cgroup_fd <0 )) +return ; + + skel =test_sock_fields__open_and_load (); +if (CHECK (!skel,"test_sock_fields__open_and_load" ,"failed\n" )) + goto done; + + egress_link =bpf_program__attach_cgroup (skel->progs.egress_read_sock_fields, + cgroup_fd); +if (CHECK (IS_ERR (egress_link),"attach_cgroup(egress)" ,"err:%ld\n" , +PTR_ERR (egress_link))) + goto done; + + ingress_link =bpf_program__attach_cgroup (skel->progs.ingress_read_sock_fields, + cgroup_fd); +if (CHECK (IS_ERR (ingress_link),"attach_cgroup(ingress)" ,"err:%ld\n" , +PTR_ERR (ingress_link))) + goto done; + + linum_map_fd =bpf_map__fd (skel->maps.linum_map); + sk_pkt_out_cnt_fd =bpf_map__fd (skel->maps.sk_pkt_out_cnt); + sk_pkt_out_cnt10_fd =bpf_map__fd (skel->maps.sk_pkt_out_cnt10);test (); -bpf_object__close (obj); -cleanup_cgroup_environment (); - -printf ("PASS\n" ); +done: +bpf_link__destroy (egress_link); +bpf_link__destroy (ingress_link); +test_sock_fields__destroy (skel); +close (cgroup_fd); }
tools/testing/selftests/bpf/progs/test_sock_fields.c +66 -88
231 lines not on this page · raw message
Signature · 1 line
2.24.1
PATCH v4 10/13 bpf: selftest: Use network_helpers in the sock_fields test
In reply to Martin KaFai LauThis patch uses start_server() and connect_to_fd() from network_helpers.h to remove the network testing boiler plate codes. epoll is no longer needed also since the timeout has already been taken care of also.
--- .../selftests/bpf/prog_tests/sock_fields.c | 88 ++----------------- 1 file changed, 9 insertions(+), 79 deletions(-)
tools/testing/selftests/bpf/prog_tests/sock_fields.c +9 -79
@@ -1,8 +1,6 @@// SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2019 Facebook */ -#include <sys/socket.h> -#include <sys/epoll.h> #include <netinet/in.h> #include <arpa/inet.h> #include <unistd.h>
@@ -12,7 +10,9 @@#include <bpf/bpf.h> #include <bpf/libbpf.h> +#include <linux/compiler.h> +#include "network_helpers.h" #include "cgroup_helpers.h" #include "test_progs.h" #include "bpf_rlimit.h"
@@ -43,13 +43,6 @@ static __u32 duration;static __u32 egress_linum_idx =EGRESS_LINUM_IDX ;static __u32 ingress_linum_idx =INGRESS_LINUM_IDX ; -static void init_loopback6 (struct sockaddr_in6 *sa6) -{ -memset (sa6,0 ,sizeof (*sa6)); - sa6->sin6_family =AF_INET6 ; - sa6->sin6_addr = in6addr_loopback; -} -static void print_sk (const struct bpf_sock *sk,const char *prefix) {char src_ip4[24 ], dst_ip4[24 ];
@@ -252,28 +245,14 @@ static int init_sk_storage(int sk_fd, __u32 pkt_out_cnt)static void test (void ) { -int listen_fd =-1 , cli_fd =-1 , accept_fd =-1 , epfd, err, i; -struct epoll_event ev; -socklen_t addrlen; +int listen_fd =-1 , cli_fd =-1 , accept_fd =-1 , err, i; +socklen_t addrlen =sizeof (struct sockaddr_in6 );char buf[DATA_LEN ]; - addrlen =sizeof (struct sockaddr_in6 ); - ev.events =EPOLLIN ; - - epfd =epoll_create (1 ); -if (CHECK (epfd ==-1 ,"epoll_create()" ,"epfd:%d errno:%d\n" , - epfd, errno)) -return ; -/* Prepare listen_fd */ - listen_fd =socket (AF_INET6 ,SOCK_STREAM |SOCK_NONBLOCK ,0 ); -if (CHECK (listen_fd ==-1 ,"socket()" ,"listen_fd:%d errno:%d\n" , - listen_fd, errno)) - goto done; - -init_loopback6 (&srv_sa6); - err =bind (listen_fd, (struct sockaddr *)&srv_sa6,sizeof (srv_sa6)); -if (CHECK (err,"bind(listen_fd)" ,"err:%d errno:%d\n" , err, errno)) + listen_fd =start_server (AF_INET6 ,SOCK_STREAM ,"::1" ,0 ,0 ); +/* start_server() has logged the error details */ +if (CHECK_FAIL (listen_fd ==-1 )) goto done; err =getsockname (listen_fd, (struct sockaddr *)&srv_sa6, &addrlen);
@@ -282,19 +261,8 @@ static void test(void) goto done;memcpy (&skel->bss->srv_sa6, &srv_sa6,sizeof (srv_sa6)); - err =listen (listen_fd,1 ); -if (CHECK (err,"listen(listen_fd)" ,"err:%d errno:%d\n" , err, errno)) - goto done; - -/* Prepare cli_fd */ - cli_fd =socket (AF_INET6 ,SOCK_STREAM |SOCK_NONBLOCK ,0 ); -if (CHECK (cli_fd ==-1 ,"socket()" ,"cli_fd:%d errno:%d\n" , cli_fd, - errno)) - goto done; - -init_loopback6 (&cli_sa6); - err =bind (cli_fd, (struct sockaddr *)&cli_sa6,sizeof (cli_sa6)); -if (CHECK (err,"bind(cli_fd)" ,"err:%d errno:%d\n" , err, errno)) + cli_fd =connect_to_fd (listen_fd,0 ); +if (CHECK_FAIL (cli_fd ==-1 )) goto done; err =getsockname (cli_fd, (struct sockaddr *)&cli_sa6, &addrlen);
@@ -302,41 +270,12 @@ static void test(void) err, errno)) goto done; -/* Connect from cli_sa6 to srv_sa6 */ - err =connect (cli_fd, (struct sockaddr *)&srv_sa6, addrlen); -printf ("srv_sa6.sin6_port:%u cli_sa6.sin6_port:%u\n\n" , -ntohs (srv_sa6.sin6_port),ntohs (cli_sa6.sin6_port)); -if (CHECK (err && errno !=EINPROGRESS , -"connect(cli_fd)" ,"err:%d errno:%d\n" , err, errno)) - goto done; - - ev.data.fd = listen_fd; - err =epoll_ctl (epfd,EPOLL_CTL_ADD , listen_fd, &ev); -if (CHECK (err,"epoll_ctl(EPOLL_CTL_ADD, listen_fd)" , -"err:%d errno:%d\n" , err, errno)) - goto done; - -/* Accept the connection */ -/* Have some timeout in accept(listen_fd). Just in case. */ - err =epoll_wait (epfd, &ev,1 ,1000 ); -if (CHECK (err !=1 || ev.data.fd != listen_fd, -"epoll_wait(listen_fd)" , -"err:%d errno:%d ev.data.fd:%d listen_fd:%d\n" , - err, errno, ev.data.fd, listen_fd)) - goto done; - accept_fd =accept (listen_fd,NULL ,NULL );if (CHECK (accept_fd ==-1 ,"accept(listen_fd)" ,"accept_fd:%d errno:%d\n" , accept_fd, errno)) goto done; - ev.data.fd = cli_fd; - err =epoll_ctl (epfd,EPOLL_CTL_ADD , cli_fd, &ev); -if (CHECK (err,"epoll_ctl(EPOLL_CTL_ADD, cli_fd)" , -"err:%d errno:%d\n" , err, errno)) - goto done; -if (init_sk_storage (accept_fd,0xeB9F )) goto done;
@@ -349,14 +288,6 @@ static void test(void) "err:%d errno:%d\n", err, errno)) goto done; -/* Have some timeout in recv(cli_fd). Just in case. */ - err =epoll_wait (epfd, &ev,1 ,1000 ); -if (CHECK (err !=1 || ev.data.fd != cli_fd, -"epoll_wait(cli_fd)" , -"err:%d errno:%d ev.data.fd:%d cli_fd:%d\n" , - err, errno, ev.data.fd, cli_fd)) - goto done; - err =recv (cli_fd, buf,DATA_LEN ,0 );if (CHECK (err !=DATA_LEN ,"recv(cli_fd)" ,"err:%d errno:%d\n" , err, errno))
@@ -383,7 +314,6 @@ static void test(void)close (cli_fd);if (listen_fd !=-1 )close (listen_fd); -close (epfd); }void test_sock_fields (void )
Signature · 1 line
2.24.1
PATCH v4 11/13 bpf: selftest: Use bpf_skc_to_tcp_sock() in the sock_fields test
In reply to Martin KaFai LauThis test uses bpf_skc_to_tcp_sock() to get a kernel tcp_sock ptr "ktp". Access the ktp->lsndtime and also pass ktp to bpf_sk_storage_get().
It also exercises the bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id() with the "ktp". To do that, a parent cgroup and a child cgroup are created. The bpf prog is attached to the child cgroup.
--- .../selftests/bpf/prog_tests/sock_fields.c | 40 +++++++++++++++---- .../selftests/bpf/progs/test_sock_fields.c | 24 ++++++++++- 2 files changed, 55 insertions(+), 9 deletions(-)
tools/testing/selftests/bpf/prog_tests/sock_fields.c +33 -7
@@ -29,7 +29,8 @@ struct bpf_spinlock_cnt {__u32 cnt; }; -#define TEST_CGROUP "/test-bpf-sock-fields" +#define PARENT_CGROUP "/test-bpf-sock-fields" +#define CHILD_CGROUP "/test-bpf-sock-fields/child"#define DATA "Hello BPF!"#define DATA_LEN sizeof(DATA)
@@ -37,6 +38,8 @@ static struct sockaddr_in6 srv_sa6, cli_sa6;static int sk_pkt_out_cnt10_fd;struct test_sock_fields *skel;static int sk_pkt_out_cnt_fd; +static __u64 parent_cg_id; +static __u64 child_cg_id;static int linum_map_fd;static __u32 duration;
@@ -142,6 +145,8 @@ static void check_result(void)"srv_sk" ,"Unexpected. Check srv_sk output. egress_linum:%u\n" , egress_linum); +CHECK (!skel->bss->lsndtime,"srv_tp" ,"Unexpected lsndtime:0\n" ); + CHECK(cli_sk.state == 10 || !cli_sk.state || cli_sk.family != AF_INET6 ||
@@ -178,6 +183,14 @@ static void check_result(void) cli_tp.bytes_received <2 *DATA_LEN ,"cli_tp" ,"Unexpected. Check cli_tp output. egress_linum:%u\n" , egress_linum); + +CHECK (skel->bss->parent_cg_id != parent_cg_id, +"parent_cg_id" ,"%zu != %zu\n" , + (size_t )skel->bss->parent_cg_id, (size_t )parent_cg_id); + +CHECK (skel->bss->child_cg_id != child_cg_id, +"child_cg_id" ,"%zu != %zu\n" , + (size_t )skel->bss->child_cg_id, (size_t )child_cg_id); }static void check_sk_pkt_out_cnt (int accept_fd,int cli_fd)
@@ -319,25 +332,35 @@ static void test(void)void test_sock_fields (void ) {struct bpf_link *egress_link =NULL , *ingress_link =NULL ; -int cgroup_fd; +int parent_cg_fd =-1 , child_cg_fd =-1 ;/* Create a cgroup, get fd, and join it */ - cgroup_fd =test__join_cgroup (TEST_CGROUP ); -if (CHECK_FAIL (cgroup_fd <0 )) + parent_cg_fd =test__join_cgroup (PARENT_CGROUP ); +if (CHECK_FAIL (parent_cg_fd <0 ))return ; + parent_cg_id =get_cgroup_id (PARENT_CGROUP ); +if (CHECK_FAIL (!parent_cg_id)) + goto done; + + child_cg_fd =test__join_cgroup (CHILD_CGROUP ); +if (CHECK_FAIL (child_cg_fd <0 )) + goto done; + child_cg_id =get_cgroup_id (CHILD_CGROUP ); +if (CHECK_FAIL (!child_cg_id)) + goto done; skel =test_sock_fields__open_and_load ();if (CHECK (!skel,"test_sock_fields__open_and_load" ,"failed\n" )) goto done; egress_link =bpf_program__attach_cgroup (skel->progs.egress_read_sock_fields, - cgroup_fd); + child_cg_fd);if (CHECK (IS_ERR (egress_link),"attach_cgroup(egress)" ,"err:%ld\n" ,PTR_ERR (egress_link))) goto done; ingress_link =bpf_program__attach_cgroup (skel->progs.ingress_read_sock_fields, - cgroup_fd); + child_cg_fd);if (CHECK (IS_ERR (ingress_link),"attach_cgroup(ingress)" ,"err:%ld\n" ,PTR_ERR (ingress_link))) goto done;
@@ -352,5 +375,8 @@ void test_sock_fields(void)bpf_link__destroy (egress_link);bpf_link__destroy (ingress_link);test_sock_fields__destroy (skel); -close (cgroup_fd); +if (child_cg_fd !=-1 ) +close (child_cg_fd); +if (parent_cg_fd !=-1 ) +close (parent_cg_fd); }
tools/testing/selftests/bpf/progs/test_sock_fields.c +22 -2
@@ -7,6 +7,7 @@#include <bpf/bpf_helpers.h> #include <bpf/bpf_endian.h> +#include "bpf_tcp_helpers.h" enum bpf_linum_array_idx {EGRESS_LINUM_IDX ,
@@ -47,6 +48,9 @@ struct bpf_tcp_sock srv_tp = {};struct bpf_sock listen_sk = {};struct bpf_sock srv_sk = {};struct bpf_sock cli_sk = {}; +__u64 parent_cg_id =0 ; +__u64 child_cg_id =0 ; +__u64 lsndtime =0 ;static bool is_loopback6 (__u32 *a6) {
@@ -121,6 +125,7 @@ int egress_read_sock_fields(struct __sk_buff *skb)struct bpf_tcp_sock *tp, *tp_ret;struct bpf_sock *sk, *sk_ret;__u32 linum, linum_idx; +struct tcp_sock *ktp; linum_idx =EGRESS_LINUM_IDX ;
@@ -165,9 +170,24 @@ int egress_read_sock_fields(struct __sk_buff *skb)tpcpy (tp_ret, tp);if (sk_ret == &srv_sk) { + ktp =bpf_skc_to_tcp_sock (sk); + +if (!ktp) +RET_LOG (); + + lsndtime = ktp->lsndtime; + + child_cg_id =bpf_sk_cgroup_id (ktp); +if (!child_cg_id) +RET_LOG (); + + parent_cg_id =bpf_sk_ancestor_cgroup_id (ktp,2 ); +if (!parent_cg_id) +RET_LOG (); +/* The userspace has created it for srv sk */ - pkt_out_cnt =bpf_sk_storage_get (&sk_pkt_out_cnt, sk,0 ,0 ); - pkt_out_cnt10 =bpf_sk_storage_get (&sk_pkt_out_cnt10, sk, + pkt_out_cnt =bpf_sk_storage_get (&sk_pkt_out_cnt, ktp,0 ,0 ); + pkt_out_cnt10 =bpf_sk_storage_get (&sk_pkt_out_cnt10, ktp,0 ,0 ); }else { pkt_out_cnt = bpf_sk_storage_get(&sk_pkt_out_cnt, sk,
Signature · 1 line
2.24.1
PATCH v4 12/13 bpf: selftest: Remove enum tcp_ca_state from bpf_tcp_helpers.h
In reply to Martin KaFai LauThe enum tcp_ca_state is available in <linux/tcp.h>.
Remove it from the bpf_tcp_helpers.h to avoid conflict when the bpf prog needs to include both both <linux/tcp.h> and bpf_tcp_helpers.h.
Modify the bpf_cubic.c and bpf_dctcp.c to use <linux/tcp.h> instead. The <linux/stddef.h> is needed by <linux/tcp.h>.
--- tools/testing/selftests/bpf/bpf_tcp_helpers.h | 8 -------- tools/testing/selftests/bpf/progs/bpf_cubic.c | 2 ++ tools/testing/selftests/bpf/progs/bpf_dctcp.c | 2 ++ 3 files changed, 4 insertions(+), 8 deletions(-)
tools/testing/selftests/bpf/bpf_tcp_helpers.h +0 -8
@@ -115,14 +115,6 @@ enum tcp_ca_event { CA_EVENT_ECN_IS_CE = 5, }; -enum tcp_ca_state { - TCP_CA_Open =0 , - TCP_CA_Disorder =1 , -TCP_CA_CWR =2 , - TCP_CA_Recovery =3 , - TCP_CA_Loss =4 -}; -struct ack_sample {__u32 pkts_acked;__s32 rtt_us;
tools/testing/selftests/bpf/progs/bpf_cubic.c +2 -0
@@ -15,6 +15,8 @@*/ #include <linux/bpf.h> +#include <linux/stddef.h> +#include <linux/tcp.h> #include "bpf_tcp_helpers.h" char _license[] SEC("license") = "GPL";
tools/testing/selftests/bpf/progs/bpf_dctcp.c +2 -0
@@ -9,6 +9,8 @@#include <stddef.h> #include <linux/bpf.h> #include <linux/types.h> +#include <linux/stddef.h> +#include <linux/tcp.h> #include <bpf/bpf_helpers.h> #include <bpf/bpf_tracing.h> #include "bpf_tcp_helpers.h"
Signature · 1 line
2.24.1
PATCH v4 13/13 bpf: selftest: Add test_btf_skc_cls_ingress
In reply to Martin KaFai LauThis patch attaches a classifier prog to the ingress filter. It exercises the following helpers with different socket pointer types in different logical branches:
1. bpf_sk_release()
2. bpf_sk_assign()
3. bpf_skc_to_tcp_request_sock(), bpf_skc_to_tcp_sock()
4. bpf_tcp_gen_syncookie, bpf_tcp_check_syncookie
--- tools/testing/selftests/bpf/bpf_tcp_helpers.h | 5 + .../bpf/prog_tests/btf_skc_cls_ingress.c | 234 ++++++++++++++++++ .../bpf/progs/test_btf_skc_cls_ingress.c | 174 +++++++++++++ 3 files changed, 413 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/btf_skc_cls_ingress.c create mode 100644 tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c
tools/testing/selftests/bpf/bpf_tcp_helpers.h +5 -0
@@ -16,6 +16,7 @@ BPF_PROG(name, args)struct sock_common {unsigned char skc_state; +__u16 skc_num; } __attribute__((preserve_access_index));enum sk_pacing {
@@ -45,6 +46,10 @@ struct inet_connection_sock {__u64 icsk_ca_priv[104 /sizeof (__u64)]; } __attribute__((preserve_access_index)); +struct request_sock { +struct sock_common __req_common; +} __attribute__((preserve_access_index)); +struct tcp_sock {struct inet_connection_sock inet_conn;
tools/testing/selftests/bpf/prog_tests/btf_skc_cls_ingress.c new file +234 -0
234 lines not on this page · raw message
tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c new file +174 -0
174 lines not on this page · raw message
Signature · 1 line
2.24.1
John Fastabend
reviewerRE: [PATCH v4 bpf-next 13/13] bpf: selftest: Add test_btf_skc_cls_ingress
Quoted 8 lines · Martin KaFai Lau
This patch attaches a classifier prog to the ingress filter. It exercises the following helpers with different socket pointer types in different logical branches:
1.bpf_sk_release()
2.bpf_sk_assign()
3.bpf_skc_to_tcp_request_sock(),bpf_skc_to_tcp_sock()
4.bpf_tcp_gen_syncookie,bpf_tcp_check_syncookie
Quoted 9 lines
Signed-off-by Martin KaFai Lau <[email protected]>--- tools/testing/selftests/bpf/bpf_tcp_helpers.h | 5 + .../bpf/prog_tests/btf_skc_cls_ingress.c | 234 ++++++++++++++++++ .../bpf/progs/test_btf_skc_cls_ingress.c | 174 +++++++++++++ 3 files changed, 413 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/btf_skc_cls_ingress.c create mode 100644 tools/testing/selftests/bpf/progs/test_btf_skc_cls_ingress.c
Hi Martin,
One piece I'm missing is how does this handle null pointer dereferences from network side when reading BTF objects? I've not got through all the code yet so maybe I'm just not there yet.
For example,
Quoted 13 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +1
-0@@ -16,6 +16,7 @@ BPF_PROG(name, args)struct sock_common {unsigned char skc_state; +__u16 skc_num; } __attribute__((preserve_access_index));enum sk_pacing {
tools/testing/selftests/bpf/bpf_tcp_helpers.h struct inet_connection_sock { · line 54
Quoted 9 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +4
-0@@ -45,6 +46,10 @@ struct inet_connection_sock {__u64 icsk_ca_priv[104 /sizeof (__u64)]; } __attribute__((preserve_access_index)); +struct request_sock { +struct sock_common __req_common; +} __attribute__((preserve_access_index)); +struct tcp_sock {struct inet_connection_sock inet_conn;
add some pointer from tcp_sock which is likely not set so should be NULL,
struct tcp_fastopen_request *fastopen_req;
[...]
Quoted 22 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +22
-0+if (bpf_skc->state ==BPF_TCP_NEW_SYN_RECV ) { +struct request_sock *req_sk; + + req_sk = (struct request_sock *)bpf_skc_to_tcp_request_sock (bpf_skc); +if (!req_sk) { +LOG (); + goto release; + } + +if (bpf_sk_assign (skb, req_sk,0 )) { +LOG (); + goto release; + } + + req_sk_sport = req_sk->__req_common.skc_num; + +bpf_sk_release (req_sk); +return TC_ACT_OK ; + }else if (bpf_skc->state ==BPF_TCP_LISTEN ) { +struct tcp_sock *tp; + + tp =bpf_skc_to_tcp_sock (bpf_skc);
tools/testing/selftests/bpf/bpf_tcp_helpers.h
Quoted 10 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +10
-0+if (!tp) { +LOG (); + goto release; + } + +if (bpf_sk_assign (skb, tp,0 )) { +LOG (); + goto release; + } +
Then use it here without a null check in the BPF program,
fastopen = tp->fastopen_req;
if (fastopen->size > 0x1234)
(do something)tools/testing/selftests/bpf/bpf_tcp_helpers.h
Quoted 6 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +6
-0+ listen_tp_sport = tp->inet_conn.icsk_inet.sk.__sk_common.skc_num; + +test_syncookie_helper (ip6h, th, tp, skb); +bpf_sk_release (tp); +return TC_ACT_OK ; + }
My quick check shows this didn't actually fault and the xlated looks like it did the read and dereference. Must be missing something? We shouldn't have fault_handler set for cls_ingress.
Perhaps a comment in the cover letter about this would be helpful? Or if I'm just being dense this morning let me know as well. ;)
Quoted 8 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +8
-0+ +if (bpf_sk_assign (skb, bpf_skc,0 )) +LOG (); + +release: +bpf_sk_release (bpf_skc); +return TC_ACT_OK ; +}
Re: [PATCH v4 bpf-next 13/13] bpf: selftest: Add test_btf_skc_cls_ingress
On Fri, Sep 25, 2020 at 09:24:02AM -0700, John Fastabend wrote:
[ ... ]
Quoted 73 lines
Hi Martin,
One piece I'm missing is how does this handle null pointer dereferences from network side when reading BTF objects? I've not got through all the code yet so maybe I'm just not there yet.
For example,
Quoted 13 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +1
-0@@ -16,6 +16,7 @@ BPF_PROG(name, args)struct sock_common {unsigned char skc_state; +__u16 skc_num; } __attribute__((preserve_access_index));enum sk_pacing {tools/testing/selftests/bpf/bpf_tcp_helpers.h struct inet_connection_sock { · line 54
Quoted 9 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +4
-0@@ -45,6 +46,10 @@ struct inet_connection_sock {__u64 icsk_ca_priv[104 /sizeof (__u64)]; } __attribute__((preserve_access_index)); +struct request_sock { +struct sock_common __req_common; +} __attribute__((preserve_access_index)); +struct tcp_sock {struct inet_connection_sock inet_conn;add some pointer from
tcp_sockwhich is likely not set so should be NULL,struct tcp_fastopen_request *fastopen_req;[...]
Quoted 22 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +22
-0+if (bpf_skc->state ==BPF_TCP_NEW_SYN_RECV ) { +struct request_sock *req_sk; + + req_sk = (struct request_sock *)bpf_skc_to_tcp_request_sock (bpf_skc); +if (!req_sk) { +LOG (); + goto release; + } + +if (bpf_sk_assign (skb, req_sk,0 )) { +LOG (); + goto release; + } + + req_sk_sport = req_sk->__req_common.skc_num; + +bpf_sk_release (req_sk); +return TC_ACT_OK ; + }else if (bpf_skc->state ==BPF_TCP_LISTEN ) { +struct tcp_sock *tp; + + tp =bpf_skc_to_tcp_sock (bpf_skc);tools/testing/selftests/bpf/bpf_tcp_helpers.h
Quoted 10 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +10
-0+if (!tp) { +LOG (); + goto release; + } + +if (bpf_sk_assign (skb, tp,0 )) { +LOG (); + goto release; + } +Then use it here without a null check in the BPF program,
Quoted 1 line
fastopen = tp->fastopen_req;
fastopen is in PTR_TO_BTF_ID here.
Quoted 1 line
if (fastopen->size > 0x1234)
This load will be marked with BPF_PROBE_MEM.
Quoted 12 lines
(do something)
tools/testing/selftests/bpf/bpf_tcp_helpers.h
Quoted 6 lines
tools/testing/selftests/bpf/bpf_tcp_helpers.h +6
-0+ listen_tp_sport = tp->inet_conn.icsk_inet.sk.__sk_common.skc_num; + +test_syncookie_helper (ip6h, th, tp, skb); +bpf_sk_release (tp); +return TC_ACT_OK ; + }My quick check shows this didn't actually fault and the xlated looks like it did the read and dereference. Must be missing something? We shouldn't have
fault_handlerset forcls_ingress.
By xlated, do you mean the interpreter mode? The LDX_PROBE_MEM is done by bpf_probe_read_kernel() in bpf/core.c.
I don't think the handling of PTR_TO_BTF_ID is depending on prog->type.
Quoted 5 lines
Perhaps a comment in the cover letter about this would be helpful? Or if I'm just being dense this morning let me know as well. ;)
Quoted 31 lines · Martin KaFai Lau
This set allows networking prog type to directly read fields from the in-kernel socket type, e.g. "struct
tcp_sock".Patch 2 has the details on the use case.
v3:
- Passarg_btf_idinstead of fn intocheck_reg_type()in Patch 1 (Lorenz)
- Movearg_btf_idfromfunc_prototo structbpf_reg_typesin Patch 2 (Lorenz)
- Removetest_sock_fieldsfrom .gitignore in Patch 8 (Andrii)
- Add tests to have better coverage on the modified helpers (Alexei) Patch 13 is added.
- Use "void *sk" as the helper argument in UAPIbpf.hv3:
-ARG_PTR_TO_SOCK_COMMON_OR_NULLwas attempted in v2. The_OR_NULLwas needed because thePTR_TO_BTF_IDcould be NULL but note that a could be NULLPTR_TO_BTF_IDis not a scalar NULL to the verifier. "_OR_NULL" implicitly gives an expectation that the helper can take a scalar NULL which does not make sense in most (except one) helpers. Passing scalar NULL should be rejected at the verification time.Thus, this patch uses
ARG_PTR_TO_BTF_ID_SOCK_COMMONto specify that the helper can take both the btf-id ptr or the legacyPTR_TO_SOCK_COMMONbut not scalar NULL. It requires thefunc_prototo explicitly specify thearg_btf_idsuch that there is a very clear expectation that the helper can handle a NULLPTR_TO_BTF_ID.v2:
- AddARG_PTR_TO_SOCK_COMMON_OR_NULL(Lorenz)
Quoted 16 lines
Martin KaFai Lau (13):
bpf: Move thePTR_TO_BTF_IDcheck tocheck_reg_type()
bpf: Enable bpf_skc_to_* sock casting helper to networking prog type
bpf: Changebpf_sk_releaseand bpf_sk_*cgroup_id to accept
ARG_PTR_TO_BTF_ID_SOCK_COMMON
bpf: Change bpf_sk_storage_*() to acceptARG_PTR_TO_BTF_ID_SOCK_COMMON
bpf: Change bpf_tcp_*_syncookie to accept
ARG_PTR_TO_BTF_ID_SOCK_COMMON
bpf: Changebpf_sk_assignto acceptARG_PTR_TO_BTF_ID_SOCK_COMMON
bpf: selftest: Addref_trackingverifier test forbpf_skccasting
bpf: selftest: Movesock_fieldstest intotest_progs
bpf: selftest: Adaptsock_fieldstest to use skel and global variables
bpf: selftest: Usenetwork_helpersin thesock_fieldstest
bpf: selftest: Usebpf_skc_to_tcp_sock()in thesock_fieldstest
bpf: selftest: Remove enumtcp_ca_statefrombpf_tcp_helpers.h
bpf: selftest: Addtest_btf_skc_cls_ingress
LGTM, thanks!
Signature · 4 lines
Lorenz Bauer | Systems Engineer 6th Floor, County Hall/The Riverside Building, SE1 7PB, UK www.cloudflare.com
Alexei Starovoitov
AppliedQuoted 3 lines · Martin KaFai Lau
This set allows networking prog type to directly read fields from the in-kernel socket type, e.g. "struct
tcp_sock".
Applied. Thanks