PCI: imx6: Select correct clock source for MX7D PCIe PHY
Subsystems (4)
PATCH 1/1 PCI: imx6: Select correct clock source for MX7D PCIe PHY
The internal PCIe PHY clock source cannot lock the PLL, use the external pad one just like iMX8MQ does, which is very similar SoC in this area.
Signed-off-by Marek Vasut <[email protected]>
Cc Richard Zhu <[email protected]>
Cc Lucas Stach <[email protected]>
Cc Shawn Guo <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Fabio Estevam <[email protected]>
--- drivers/pci/controller/dwc/pci-imx6.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/pci/controller/dwc/pci-imx6.c +2 -1
@@ -636,7 +636,8 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)break ;case IMX7D :regmap_update_bits (imx6_pcie->iomuxc_gpr,IOMUXC_GPR12 , -IMX7D_GPR12_PCIE_PHY_REFCLK_SEL ,0 ); +IMX7D_GPR12_PCIE_PHY_REFCLK_SEL , +IMX7D_GPR12_PCIE_PHY_REFCLK_SEL );break ;case IMX6SX : regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
Signature · 7 lines
2.28.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel