Dynamicaly allocate SG table from the pages
Subsystems (6)
v4 cover Dynamicaly allocate SG table from the pages
From: Leon Romanovsky <[email protected]>
Changelog:
v4:
* Fixed formatting in first patch.
* Added fix (clear tmp_netnts) in first patch to fix i915 failure.
* Added test patches
v3: https://lore.kernel.org/linux-rdma/[email protected]/
* Squashed Christopher's suggestion to avoid introduced new API, but extend existing one.
v2: https://lore.kernel.org/linux-rdma/[email protected]
* Fixed indentations and comments
* Deleted sg_alloc_next()
* Squashed lib/scatterlist patches into one
v1: https://lore.kernel.org/lkml/[email protected]
* Changed _sg_chain to be __sg_chain
* Added dependency on ARCH_NO_SG_CHAIN
* Removed struct sg_append
v0:
* https://lore.kernel.org/lkml/[email protected]
--------------------------------------------------------------------------
From Maor:
This series extends __sg_alloc_table_from_pages to allow chaining of new pages to already initialized SG table.
This allows drivers to utilize the optimization of merging contiguous pages without a need to pre allocate all the pages and hold them in a very large temporary buffer prior to the call to SG table initialization.
The second patch changes the Infiniband driver to use the new API. It removes duplicate functionality from the code and benefits the optimization of allocating dynamic SG table from pages.
In huge pages system of 2MB page size, without this change, the SG table would contain x512 SG entries.
E.g. for 100GB memory registration:
Number of entries Size
Before 26214400 600.0MB
After 51200 1.2MB
Thanks
Maor Gottlieb (2):
lib/scatterlist: Add support in dynamic allocation of SG table from
pages
RDMA/umem: Move to allocate SG table from pages
Tvrtko Ursulin (2):
tools/testing/scatterlist: Rejuvenate bit-rotten test tools/testing/scatterlist: Show errors in human readable form
drivers/gpu/drm/i915/gem/i915_gem_userptr.c | 12 +- drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c | 15 +- drivers/infiniband/core/umem.c | 92 ++--------- include/linux/scatterlist.h | 43 +++--- lib/scatterlist.c | 160 +++++++++++++++----- lib/sg_pool.c | 3 +- tools/testing/scatterlist/Makefile | 3 +- tools/testing/scatterlist/linux/mm.h | 35 +++++ tools/testing/scatterlist/main.c | 53 +++++-- 9 files changed, 248 insertions(+), 168 deletions(-)
--
2.26.2
PATCH v4 1/4 lib/scatterlist: Add support in dynamic allocation of SG table from pages
From: Maor Gottlieb <[email protected]>
Extend __sg_alloc_table_from_pages to support dynamic allocation of SG table from pages. It should be used by drivers that can't supply all the pages at one time.
This function returns the last populated SGE in the table. Users should pass it as an argument to the function from the second call and forward. As before, nents will be equal to the number of populated SGEs (chunks).
With this new extension, drivers can benefit the optimization of merging contiguous pages without a need to allocate all pages in advance and hold them in a large buffer.
E.g. with the Infiniband driver that allocates a single page for hold the pages. For 1TB memory registration, the temporary buffer would consume only 4KB, instead of 2GB.
--- drivers/gpu/drm/i915/gem/i915_gem_userptr.c | 12 +- drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c | 15 +- include/linux/scatterlist.h | 43 +++--- lib/scatterlist.c | 160 +++++++++++++++----- lib/sg_pool.c | 3 +- tools/testing/scatterlist/main.c | 9 +- 6 files changed, 165 insertions(+), 77 deletions(-)
drivers/gpu/drm/i915/gem/i915_gem_userptr.c +6 -6
@@ -403,6 +403,7 @@ __i915_gem_userptr_alloc_pages(struct drm_i915_gem_object *obj,unsigned int max_segment =i915_sg_segment_size ();struct sg_table *st;unsigned int sg_page_sizes; +struct scatterlist *sg;int ret; st =kmalloc (sizeof (*st),GFP_KERNEL );
@@ -410,13 +411,12 @@ __i915_gem_userptr_alloc_pages(struct drm_i915_gem_object *obj,return ERR_PTR (-ENOMEM ); alloc_table: - ret =__sg_alloc_table_from_pages (st, pvec, num_pages, -0 , num_pages <<PAGE_SHIFT , - max_segment, -GFP_KERNEL ); -if (ret) { + sg =__sg_alloc_table_from_pages (st, pvec, num_pages,0 , + num_pages <<PAGE_SHIFT , max_segment, +NULL ,0 ,GFP_KERNEL ); +if (IS_ERR (sg)) {kfree (st); -return ERR_PTR (ret); +return ERR_CAST (sg); } ret =i915_gem_gtt_prepare_pages (obj, st);
drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c +9 -6
@@ -419,6 +419,7 @@ static int vmw_ttm_map_dma(struct vmw_ttm_tt *vmw_tt)int ret =0 ;static size_t sgl_size;static size_t sgt_size; +struct scatterlist *sg;if (vmw_tt->mapped)return 0 ;
@@ -441,13 +442,15 @@ static int vmw_ttm_map_dma(struct vmw_ttm_tt *vmw_tt)if (unlikely (ret !=0 ))return ret; - ret =__sg_alloc_table_from_pages - (&vmw_tt->sgt, vsgt->pages, vsgt->num_pages,0 , - (unsigned long ) vsgt->num_pages <<PAGE_SHIFT , -dma_get_max_seg_size (dev_priv->dev->dev), -GFP_KERNEL ); -if (unlikely (ret !=0 )) + sg =__sg_alloc_table_from_pages (&vmw_tt->sgt, vsgt->pages, + vsgt->num_pages,0 , + (unsigned long ) vsgt->num_pages <<PAGE_SHIFT , +dma_get_max_seg_size (dev_priv->dev->dev), +NULL ,0 ,GFP_KERNEL ); +if (IS_ERR (sg)) { + ret =PTR_ERR (sg); goto out_sg_alloc_fail; + }if (vsgt->num_pages > vmw_tt->sgt.nents) { uint64_t over_alloc =
include/linux/scatterlist.h +25 -18
62 lines not on this page · raw message
lib/scatterlist.c +119 -41
248 lines not on this page · raw message
lib/sg_pool.c +2 -1
@@ -129,7 +129,8 @@ int sg_alloc_table_chained(struct sg_table *table, int nents, nents_first_chunk =0 ; } - ret =__sg_alloc_table (table, nents,SG_CHUNK_SIZE , +memset (table,0 ,sizeof (*table)); + ret =__sg_alloc_table (table,NULL , nents,SG_CHUNK_SIZE , first_chunk, nents_first_chunk,GFP_ATOMIC , sg_pool_alloc);if (unlikely (ret))
tools/testing/scatterlist/main.c +4 -5
@@ -55,14 +55,13 @@ int main(void)for (i =0 , test = tests; test->expected_segments; test++, i++) {struct page *pages[MAX_PAGES ];struct sg_table st; -int ret; +struct scatterlist *sg;set_pages (pages, test->pfn, test->num_pages); - ret =__sg_alloc_table_from_pages (&st, pages, test->num_pages, -0 , test->size, test->max_seg, -GFP_KERNEL ); -assert (ret == test->alloc_ret); + sg =__sg_alloc_table_from_pages (&st, pages, test->num_pages,0 , + test->size, test->max_seg,NULL ,0 ,GFP_KERNEL ); +assert (PTR_ERR_OR_ZERO (sg) == test->alloc_ret);if (test->alloc_ret)continue ;
--
2.26.2
Jason Gunthorpe
maintainerRe: [PATCH rdma-next v4 1/4] lib/scatterlist: Add support in dynamic allocation of SG table from pages
Quoted 14 lines · Leon Romanovsky
lib/scatterlist.c +9
-2+struct scatterlist *__sg_alloc_table_from_pages (struct sg_table *sgt, +struct page **pages,unsigned int n_pages,unsigned int offset, +unsigned long size,unsigned int max_segment, +struct scatterlist *prv,unsigned int left_pages, +gfp_t gfp_mask) { -unsigned int chunks, cur_page, seg_len, i; +unsigned int chunks, cur_page, seg_len, i, prv_len =0 ; +struct scatterlist *s = prv; +unsigned int table_size; +unsigned int tmp_nents;int ret; -struct scatterlist *s;
lib/scatterlist.c EXPORT_SYMBOL(sg_alloc_table); · line 448
Quoted 10 lines
lib/scatterlist.c +8
-1if (WARN_ON (!max_segment ||offset_in_page (max_segment))) -return -EINVAL ; +return ERR_PTR (-EINVAL ); +if (IS_ENABLED (CONFIG_ARCH_NO_SG_CHAIN ) && prv) +return ERR_PTR (-EOPNOTSUPP ); + + tmp_nents = prv ? sgt->nents :0 ; + +if (prv && + page_to_pfn(sg_page(prv)) + (prv->length >> PAGE_SHIFT) ==
This calculation of the end doesn't consider sg->offset
Quoted 9 lines
lib/scatterlist.c +2
-0+ page_to_pfn(pages[0])) + prv_len = prv->length;/* compute number of contiguous chunks */ chunks =1 ;@@ -410,13 +461,17 @@ int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages, } }
lib/scatterlist.c int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages, · line 470
Quoted 10 lines
lib/scatterlist.c +7
-3- ret =sg_alloc_table (sgt, chunks, gfp_mask); -if (unlikely (ret)) -return ret; +if (!prv) { +/* Only the last allocation could be less than the maximum */ + table_size = left_pages ?SG_MAX_SINGLE_ALLOC : chunks; + ret =sg_alloc_table (sgt, table_size, gfp_mask); +if (unlikely (ret)) +return ERR_PTR (ret); + }
This is basically redundant right? Now that get_next_sg() can allocate SGs it can just build them one by one, no need to preallocate.
Actually all the changes the the allocation seem like overkill, just allocate a single new array directly in get_next_sg() whenever it needs.
Something like this:
@@ -365,6 +372,37 @@ int sg_alloc_table(struct sg_table *table, unsigned int nents, gfp_t gfp_mask)
}
EXPORT_SYMBOL(sg_alloc_table);
+static struct scatterlist *get_next_sg(struct sg_table *table,
+ struct scatterlist *cur, unsigned long needed_sges,
+ gfp_t gfp_mask)
+{
+ struct scatterlist *new_sg;
+ unsigned int alloc_size;
+
+ if (cur) {
+ struct scatterlist *next_sg = sg_next(cur);
+
+ /* Check if last entry should be keeped for chainning */
+ if (!sg_is_last(next_sg) || needed_sges == 1)
+ return next_sg;
+ }
+
+ alloc_size = min_t(unsigned long, needed_sges, SG_MAX_SINGLE_ALLOC);
+ new_sg = sg_kmalloc(alloc_size, gfp_mask);
+ if (!new_sg)
+ return ERR_PTR(-ENOMEM);
+ sg_init_table(new_sg, alloc_size);
+ if (cur) {
+ __sg_chain(cur, new_sg);
+ table->orig_nents += alloc_size - 1;
+ } else {
+ table->sgl = new_sg;
+ table->orig_nents = alloc_size;
+ table->nents = 0;
+ }
+ return new_sg;
+}
+
/**
* __sg_alloc_table_from_pages - Allocate and initialize an sg table from
* an array of pages
@@ -374,29 +412,64 @@ EXPORT_SYMBOL(sg_alloc_table);
* @offset: Offset from start of the first page to the start of a buffer
* @size: Number of valid bytes in the buffer (after offset)
* @max_segment: Maximum size of a scatterlist node in bytes (page aligned)
+ * @prv: Last populated sge in sgt
+ * @left_pages: Left pages caller have to set after this call
* @gfp_mask: GFP allocation mask
*
- * Description:
- * Allocate and initialize an sg table from a list of pages. Contiguous - * ranges of the pages are squashed into a single scatterlist node up to the - * maximum size specified in @max_segment. An user may provide an offset at a - * start and a size of valid data in a buffer specified by the page array. - * The returned sg table is released by sg_free_table. + * Description: + * If @prv is NULL, allocate and initialize an sg table from a list of pages, + * else reuse the scatterlist passed in at @prv. + * Contiguous ranges of the pages are squashed into a single scatterlist + * entry up to the maximum size specified in @max_segment. A user may + * provide an offset at a start and a size of valid data in a buffer + * specified by the page array. * * Returns: - * 0 on success, negative error on failure + * Last SGE in sgt on success, PTR_ERR on otherwise. + * The allocation in @sgt must be released by sg_free_table.
+ *
+ * Notes:
+ * If this function returns non-0 (eg failure), the caller must call
+ * sg_free_table() to cleanup any leftover allocations.
*/
-int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages,
- unsigned int n_pages, unsigned int offset,
- unsigned long size, unsigned int max_segment,
- gfp_t gfp_mask)
+struct scatterlist *__sg_alloc_table_from_pages(struct sg_table *sgt,
+ struct page **pages, unsigned int n_pages, unsigned int offset,
+ unsigned long size, unsigned int max_segment,
+ struct scatterlist *prv, unsigned int left_pages,
+ gfp_t gfp_mask)
{
- unsigned int chunks, cur_page, seg_len, i;
- int ret;
- struct scatterlist *s;
+ unsigned int chunks, cur_page, seg_len, i, prv_len = 0;
+ unsigned int added_nents = 0;
+ struct scatterlist *s = prv;
if (WARN_ON(!max_segment || offset_in_page(max_segment)))
- return -EINVAL;
+ return ERR_PTR(-EINVAL);
+ if (IS_ENABLED(CONFIG_ARCH_NO_SG_CHAIN) && prv)
+ return ERR_PTR(-EOPNOTSUPP);
+
+ if (prv) {
+ unsigned long paddr = (page_to_pfn(sg_page(prv)) * PAGE_SIZE +
+ prv->offset + prv->length) /
+ PAGE_SIZE;
+
+ if (WARN_ON(offset))
+ return ERR_PTR(-EINVAL);
+
+ /* Merge contiguous pages into the last SG */
+ prv_len = prv->length;
+ while (n_pages && page_to_pfn(pages[0]) == paddr) {
+ if (prv->length + PAGE_SIZE > max_segment)
+ break;
+ prv->length += PAGE_SIZE;
+ paddr++;
+ pages++;
+ n_pages--;
+ }
+ if (!n_pages) {
+ sg_mark_end(sg_next(prv));
+ return prv;
+ }
+ }
/* compute number of contiguous chunks */
chunks = 1;
@@ -410,13 +483,9 @@ int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages,
}
}
- ret = sg_alloc_table(sgt, chunks, gfp_mask);
- if (unlikely(ret))
- return ret;
-
/* merging chunks and putting them into the scatterlist */ cur_page = 0;
- for_each_sg(sgt->sgl, s, sgt->orig_nents, i) {
+ for (i = 0; i < chunks; i++) {
unsigned int j, chunk_size;
/* look for the end of the current chunk */
@@ -429,15 +498,28 @@ int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages,
break;
}
+ /* Pass how many chunks might be left */
+ s = get_next_sg(sgt, s, chunks - i + left_pages, gfp_mask);
+ if (IS_ERR(s)) {
+ /*
+ * Adjust entry length to be as before function was
+ * called.
+ */
+ if (prv)
+ prv->length = prv_len;
+ return s;
+ }
chunk_size = ((j - cur_page) << PAGE_SHIFT) - offset; sg_set_page(s, pages[cur_page],
min_t(unsigned long, size, chunk_size), offset);
+ added_nents++;
size -= chunk_size;
offset = 0;
cur_page = j;
}
-
- return 0;
+ sgt->nents += added_nents;
+ sg_mark_end(s);
+ return s;
}
EXPORT_SYMBOL(__sg_alloc_table_from_pages);
Re: [PATCH rdma-next v4 1/4] lib/scatterlist: Add support in dynamic allocation of SG table from pages
Quoted 15 lines · Jason Gunthorpe
Quoted 14 lines · Leon Romanovsky
lib/scatterlist.c +9
-2+struct scatterlist *__sg_alloc_table_from_pages (struct sg_table *sgt, +struct page **pages,unsigned int n_pages,unsigned int offset, +unsigned long size,unsigned int max_segment, +struct scatterlist *prv,unsigned int left_pages, +gfp_t gfp_mask) { -unsigned int chunks, cur_page, seg_len, i; +unsigned int chunks, cur_page, seg_len, i, prv_len =0 ; +struct scatterlist *s = prv; +unsigned int table_size; +unsigned int tmp_nents;int ret; -struct scatterlist *s;
Quoted 11 lines
lib/scatterlist.c EXPORT_SYMBOL(sg_alloc_table); · line 448
Quoted 10 lines
if (WARN_ON(!max_segment || offset_in_page(max_segment)))lib/scatterlist.c +8
-1-return -EINVAL ; +return ERR_PTR (-EINVAL ); +if (IS_ENABLED (CONFIG_ARCH_NO_SG_CHAIN ) && prv) +return ERR_PTR (-EOPNOTSUPP ); + + tmp_nents = prv ? sgt->nents :0 ; + +if (prv && + page_to_pfn(sg_page(prv)) + (prv->length >> PAGE_SHIFT) ==This calculation of the end doesn't consider
sg->offset
Right, should be fixed.
Quoted 23 lines
Quoted 10 lines
lib/scatterlist.c +2
-0+ page_to_pfn(pages[0])) + prv_len = prv->length;/* compute number of contiguous chunks */ chunks =1 ;@@ -410,13 +461,17 @@ int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages, } }lib/scatterlist.c int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages, · line 470
Quoted 10 lines
lib/scatterlist.c +7
-3- ret =sg_alloc_table (sgt, chunks, gfp_mask); -if (unlikely (ret)) -return ret; +if (!prv) { +/* Only the last allocation could be less than the maximum */ + table_size = left_pages ?SG_MAX_SINGLE_ALLOC : chunks; + ret =sg_alloc_table (sgt, table_size, gfp_mask); +if (unlikely (ret)) +return ERR_PTR (ret); + }This is basically redundant right? Now that
get_next_sg()can allocate SGs it can just build them one by one, no need to preallocate.
Quoted 3 lines
Actually all the changes the the allocation seem like overkill, just allocate a single new array directly in
get_next_sg()whenever it needs.
No, only the last allocation could be less than maximum. (as written in the comment). I am preferring to stick with the current implementation and fix the offset.
Quoted 167 lines
Something like this:
lib/scatterlist.c +97
-22@@ -365,6 +372,37 @@ int sg_alloc_table(struct sg_table *table, unsigned int nents, gfp_t gfp_mask) }EXPORT_SYMBOL (sg_alloc_table); +static struct scatterlist *get_next_sg (struct sg_table *table, +struct scatterlist *cur,unsigned long needed_sges, +gfp_t gfp_mask) +{ +struct scatterlist *new_sg; +unsigned int alloc_size; + +if (cur) { +struct scatterlist *next_sg =sg_next (cur); + +/* Check if last entry should be keeped for chainning */ +if (!sg_is_last (next_sg) || needed_sges ==1 ) +return next_sg; + } + + alloc_size = min_t(unsigned long, needed_sges, SG_MAX_SINGLE_ALLOC); + new_sg =sg_kmalloc (alloc_size, gfp_mask); +if (!new_sg) +return ERR_PTR (-ENOMEM ); +sg_init_table (new_sg, alloc_size); +if (cur) { +__sg_chain (cur, new_sg); + table->orig_nents += alloc_size -1 ; + }else { + table->sgl = new_sg; + table->orig_nents = alloc_size; + table->nents =0 ; + } +return new_sg; +} +/** * __sg_alloc_table_from_pages - Allocate and initialize an sg table from * an array of pages @@ -374,29 +412,64 @@ EXPORT_SYMBOL(sg_alloc_table);* @offset: Offset from start of the first page to the start of a buffer * @size: Number of valid bytes in the buffer (after offset) * @max_segment: Maximum size of a scatterlist node in bytes (page aligned) +* @prv: Last populated sge in sgt +* @left_pages: Left pages caller have to set after this call * @gfp_mask: GFP allocation mask * -* Description: -* Allocate and initialize an sg table from a list of pages. Contiguous -* ranges of the pages are squashed into a single scatterlist node up to the -* maximum size specified in @max_segment. An user may provide an offset at a -* start and a size of valid data in a buffer specified by the page array. -* The returned sg table is released by sg_free_table. +* Description: +* If @prv is NULL, allocate and initialize an sg table from a list of pages, +* else reuse the scatterlist passed in at @prv. +* Contiguous ranges of the pages are squashed into a single scatterlist +* entry up to the maximum size specified in @max_segment. A user may +* provide an offset at a start and a size of valid data in a buffer +* specified by the page array. * * Returns: -* 0 on success, negative error on failure +* Last SGE in sgt on success, PTR_ERR on otherwise. +* The allocation in @sgt must be released by sg_free_table. +* +* Notes: +* If this function returns non-0 (eg failure), the caller must call +* sg_free_table() to cleanup any leftover allocations. */ -int __sg_alloc_table_from_pages (struct sg_table *sgt,struct page **pages, -unsigned int n_pages,unsigned int offset, -unsigned long size,unsigned int max_segment, -gfp_t gfp_mask) +struct scatterlist *__sg_alloc_table_from_pages (struct sg_table *sgt, +struct page **pages,unsigned int n_pages,unsigned int offset, +unsigned long size,unsigned int max_segment, +struct scatterlist *prv,unsigned int left_pages, +gfp_t gfp_mask) { -unsigned int chunks, cur_page, seg_len, i; -int ret; -struct scatterlist *s; +unsigned int chunks, cur_page, seg_len, i, prv_len =0 ; +unsigned int added_nents =0 ; +struct scatterlist *s = prv;if (WARN_ON (!max_segment ||offset_in_page (max_segment))) -return -EINVAL ; +return ERR_PTR (-EINVAL ); +if (IS_ENABLED (CONFIG_ARCH_NO_SG_CHAIN ) && prv) +return ERR_PTR (-EOPNOTSUPP ); + +if (prv) { +unsigned long paddr = (page_to_pfn (sg_page (prv)) *PAGE_SIZE + + prv->offset + prv->length) / +PAGE_SIZE ; + +if (WARN_ON (offset)) +return ERR_PTR (-EINVAL ); + +/* Merge contiguous pages into the last SG */ + prv_len = prv->length; +while (n_pages &&page_to_pfn (pages[0 ]) == paddr) { +if (prv->length +PAGE_SIZE > max_segment) +break ; + prv->length +=PAGE_SIZE ; + paddr++; + pages++; + n_pages--; + } +if (!n_pages) { +sg_mark_end (sg_next (prv)); +return prv; + } + }/* compute number of contiguous chunks */ chunks =1 ;@@ -410,13 +483,9 @@ int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages, } } - ret =sg_alloc_table (sgt, chunks, gfp_mask); -if (unlikely (ret)) -return ret; -/* merging chunks and putting them into the scatterlist */ cur_page =0 ; -for_each_sg (sgt->sgl, s, sgt->orig_nents, i) { +for (i =0 ; i < chunks; i++) {unsigned int j, chunk_size;/* look for the end of the current chunk */ @@ -429,15 +498,28 @@ int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages,break ; } +/* Pass how many chunks might be left */ + s =get_next_sg (sgt, s, chunks - i + left_pages, gfp_mask); +if (IS_ERR (s)) { +/* +* Adjust entry length to be as before function was +* called. +*/ +if (prv) + prv->length = prv_len; +return s; + } chunk_size = ((j - cur_page) <<PAGE_SHIFT ) - offset;sg_set_page (s, pages[cur_page], min_t(unsigned long, size, chunk_size), offset); + added_nents++; size -= chunk_size; offset =0 ; cur_page = j; } - -return 0 ; + sgt->nents += added_nents; +sg_mark_end (s); +return s; }EXPORT_SYMBOL (__sg_alloc_table_from_pages);
Jason Gunthorpe
maintainerRe: [PATCH rdma-next v4 1/4] lib/scatterlist: Add support in dynamic allocation of SG table from pages
Quoted 53 lines · Maor Gottlieb
Quoted 15 lines · Jason Gunthorpe
Quoted 14 lines · Leon Romanovsky
lib/scatterlist.c +9
-2+struct scatterlist *__sg_alloc_table_from_pages (struct sg_table *sgt, +struct page **pages,unsigned int n_pages,unsigned int offset, +unsigned long size,unsigned int max_segment, +struct scatterlist *prv,unsigned int left_pages, +gfp_t gfp_mask) { -unsigned int chunks, cur_page, seg_len, i; +unsigned int chunks, cur_page, seg_len, i, prv_len =0 ; +struct scatterlist *s = prv; +unsigned int table_size; +unsigned int tmp_nents;int ret; -struct scatterlist *s;Quoted 11 lines
lib/scatterlist.c EXPORT_SYMBOL(sg_alloc_table); · line 448
Quoted 10 lines
if (WARN_ON(!max_segment || offset_in_page(max_segment)))lib/scatterlist.c +8
-1-return -EINVAL ; +return ERR_PTR (-EINVAL ); +if (IS_ENABLED (CONFIG_ARCH_NO_SG_CHAIN ) && prv) +return ERR_PTR (-EOPNOTSUPP ); + + tmp_nents = prv ? sgt->nents :0 ; + +if (prv && + page_to_pfn(sg_page(prv)) + (prv->length >> PAGE_SHIFT) ==This calculation of the end doesn't consider
sg->offsetRight, should be fixed.
Quoted 23 lines
Quoted 10 lines
lib/scatterlist.c +2
-0+ page_to_pfn(pages[0])) + prv_len = prv->length;/* compute number of contiguous chunks */ chunks =1 ;@@ -410,13 +461,17 @@ int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages, } }lib/scatterlist.c int __sg_alloc_table_from_pages(struct sg_table *sgt, struct page **pages, · line 470
Quoted 10 lines
lib/scatterlist.c +7
-3- ret =sg_alloc_table (sgt, chunks, gfp_mask); -if (unlikely (ret)) -return ret; +if (!prv) { +/* Only the last allocation could be less than the maximum */ + table_size = left_pages ?SG_MAX_SINGLE_ALLOC : chunks; + ret =sg_alloc_table (sgt, table_size, gfp_mask); +if (unlikely (ret)) +return ERR_PTR (ret); + }This is basically redundant right? Now that
get_next_sg()can allocate SGs it can just build them one by one, no need to preallocate.
Quoted 6 lines
Quoted 3 lines
Actually all the changes the the allocation seem like overkill, just allocate a single new array directly in
get_next_sg()whenever it needs.No, only the last allocation could be less than maximum. (as written in the comment).
The point is that get_next_sg is fully redundent with sg_alloc_table() because it is always used in cases when prv is set. There is zero reason to call sg_alloc_table here in the one case where prv is not set.
Further this cleans up the spagehtti goto in the middle of the for loop and avoids allocating an extra chunk if the page list fully fits in prv.
Given how much smaller it is I think you should look more carefully.
Jason
PATCH v4 2/4 tools/testing/scatterlist: Rejuvenate bit-rotten test
In reply to Leon RomanovskyFrom: Tvrtko Ursulin <[email protected]>
A couple small tweaks are needed to make the test build and run on current kernels.
--- tools/testing/scatterlist/Makefile | 3 ++- tools/testing/scatterlist/linux/mm.h | 35 ++++++++++++++++++++++++++++ 2 files changed, 37 insertions(+), 1 deletion(-)
tools/testing/scatterlist/Makefile +2 -1
@@ -14,7 +14,7 @@ targets: include $(TARGETS) main: $(OFILES) clean: - $(RM) $(TARGETS) $(OFILES) scatterlist.c linux/scatterlist.h linux/highmem.h linux/kmemleak.h asm/io.h + $(RM) $(TARGETS) $(OFILES) scatterlist.c linux/scatterlist.h linux/highmem.h linux/kmemleak.h linux/slab.h asm/io.h @rmdir asm scatterlist.c: ../../../lib/scatterlist.c
@@ -28,4 +28,5 @@ include: ../../../include/linux/scatterlist.h @touch asm/io.h @touch linux/highmem.h @touch linux/kmemleak.h + @touch linux/slab.h @cp $< linux/scatterlist.h
tools/testing/scatterlist/linux/mm.h +35 -0
@@ -114,6 +114,12 @@ static inline void *kmalloc(unsigned int size, unsigned int flags)return malloc (size); } +static inline void * +kmalloc_array (unsigned int n,unsigned int size,unsigned int flags) +{ +return malloc (n * size); +} +#define kfree (x) free(x)#define kmemleak_alloc (a, b, c, d)
@@ -122,4 +128,33 @@ static inline void *kmalloc(unsigned int size, unsigned int flags)#define PageSlab (p) (0)#define flush_kernel_dcache_page (p) +#define MAX_ERRNO 4095 + +#define IS_ERR_VALUE (x) unlikely((unsigned long)(void *)(x) >= (unsigned long)-MAX_ERRNO) + +static inline void *__must_check ERR_PTR (long error) +{ +return (void *) error; +} + +static inline long __must_check PTR_ERR (__force const void *ptr) +{ +return (long ) ptr; +} + +static inline bool __must_check IS_ERR (__force const void *ptr) +{ +return IS_ERR_VALUE ((unsigned long )ptr); +} + +static inline int __must_check PTR_ERR_OR_ZERO (__force const void *ptr) +{ +if (IS_ERR (ptr)) +return PTR_ERR (ptr); +else +return 0 ; +} + +#define IS_ENABLED (x) (0) +#endif
--
2.26.2
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v4 3/4 tools/testing/scatterlist: Show errors in human readable form
In reply to Leon RomanovskyFrom: Tvrtko Ursulin <[email protected]>
Instead of just asserting dump some more useful info about what the test saw versus what it expected to see.
--- tools/testing/scatterlist/main.c | 44 ++++++++++++++++++++++++-------- 1 file changed, 34 insertions(+), 10 deletions(-)
tools/testing/scatterlist/main.c +34 -10
@@ -5,6 +5,15 @@#define MAX_PAGES (64) +struct test { +int alloc_ret; +unsigned num_pages; +unsigned *pfn; +unsigned size; +unsigned int max_seg; +unsigned int expected_segments; +}; +static void set_pages (struct page **pages,const unsigned *array,unsigned num) {unsigned int i;
@@ -17,17 +26,32 @@ static void set_pages(struct page **pages, const unsigned *array, unsigned num)#define pfn (...) (unsigned []){ __VA_ARGS__ } +static void fail (struct test *test,struct sg_table *st,const char *cond) +{ +unsigned int i; + +fprintf (stderr,"Failed on '%s'!\n\n" , cond); + +printf ("size = %u, max segment = %u, expected nents = %u\nst->nents = %u, st->orig_nents= %u\n" , + test->size, test->max_seg, test->expected_segments, st->nents, + st->orig_nents); + +printf ("%u input PFNs:" , test->num_pages); +for (i =0 ; i < test->num_pages; i++) +printf (" %x" , test->pfn[i]); +printf ("\n" ); + +exit (1 ); +} + +#define VALIDATE (cond, st, test) \ + if (!(cond)) \ + fail((test), (st), #cond); +int main (void ) {const unsigned int sgmax =SCATTERLIST_MAX_SEGMENT ; -struct test { -int alloc_ret; -unsigned num_pages; -unsigned *pfn; -unsigned size; -unsigned int max_seg; -unsigned int expected_segments; - } *test, tests[] = { +struct test *test, tests[] = { { -EINVAL ,1 ,pfn (0 ),PAGE_SIZE ,PAGE_SIZE +1 ,1 }, { -EINVAL ,1 ,pfn (0 ),PAGE_SIZE ,0 ,1 }, { -EINVAL ,1 ,pfn (0 ),PAGE_SIZE , sgmax +1 ,1 },
@@ -66,8 +90,8 @@ int main(void)if (test->alloc_ret)continue ; -assert (st.nents == test->expected_segments); -assert (st.orig_nents == test->expected_segments); +VALIDATE (st.nents == test->expected_segments, &st, test); +VALIDATE (st.orig_nents == test->expected_segments, &st, test);sg_free_table (&st); }
--
2.26.2
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v4 4/4 RDMA/umem: Move to allocate SG table from pages
In reply to Leon RomanovskyFrom: Maor Gottlieb <[email protected]>
Remove the implementation of ib_umem_add_sg_table and instead call to __sg_alloc_table_from_pages which already has the logic to merge contiguous pages.
Besides that it removes duplicated functionality, it reduces the memory consumption of the SG table significantly. Prior to this patch, the SG table was allocated in advance regardless consideration of contiguous pages.
In huge pages system of 2MB page size, without this change, the SG table would contain x512 SG entries. E.g. for 100GB memory registration:
Number of entries Size
Before 26214400 600.0MB
After 51200 1.2MB
--- drivers/infiniband/core/umem.c | 92 +++++----------------------------- 1 file changed, 12 insertions(+), 80 deletions(-)
drivers/infiniband/core/umem.c +12 -80
@@ -63,73 +63,6 @@ static void __ib_umem_release(struct ib_device *dev, struct ib_umem *umem, int dsg_free_table (&umem->sg_head); } -/* ib_umem_add_sg_table - Add N contiguous pages to scatter table -* -* sg: current scatterlist entry -* page_list: array of npage struct page pointers -* npages: number of pages in page_list -* max_seg_sz: maximum segment size in bytes -* nents: [out] number of entries in the scatterlist -* -* Return new end of scatterlist -*/ -static struct scatterlist *ib_umem_add_sg_table (struct scatterlist *sg, -struct page **page_list, -unsigned long npages, -unsigned int max_seg_sz, -int *nents) -{ -unsigned long first_pfn; -unsigned long i =0 ; -bool update_cur_sg = false; -bool first = !sg_page (sg); - -/* Check if new page_list is contiguous with end of previous page_list. -* sg->length here is a multiple of PAGE_SIZE and sg->offset is 0. -*/ -if (!first && (page_to_pfn (sg_page (sg)) + (sg->length >>PAGE_SHIFT ) == -page_to_pfn (page_list[0 ]))) - update_cur_sg = true; - -while (i != npages) { -unsigned long len; -struct page *first_page = page_list[i]; - - first_pfn =page_to_pfn (first_page); - -/* Compute the number of contiguous pages we have starting -* at i -*/ -for (len =0 ; i != npages && - first_pfn + len ==page_to_pfn (page_list[i]) && - len < (max_seg_sz >>PAGE_SHIFT ); - len++) - i++; - -/* Squash N contiguous pages from page_list into current sge */ -if (update_cur_sg) { -if ((max_seg_sz - sg->length) >= (len <<PAGE_SHIFT )) { -sg_set_page (sg,sg_page (sg), - sg->length + (len <<PAGE_SHIFT ), -0 ); - update_cur_sg = false; -continue ; - } - update_cur_sg = false; - } - -/* Squash N contiguous pages into next sge or first sge */ -if (!first) - sg =sg_next (sg); - - (*nents)++; -sg_set_page (sg, first_page, len <<PAGE_SHIFT ,0 ); - first = false; - } - -return sg; -} -/** * ib_umem_find_best_pgsz - Find best HW page size to use for this MR *
@@ -221,7 +154,7 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device,struct mm_struct *mm;unsigned long npages;int ret; -struct scatterlist *sg; +struct scatterlist *sg =NULL ;unsigned int gup_flags =FOLL_WRITE ;/*
@@ -276,15 +209,9 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, cur_base = addr &PAGE_MASK ; - ret =sg_alloc_table (&umem->sg_head, npages,GFP_KERNEL ); -if (ret) - goto vma; -if (!umem->writable) gup_flags |=FOLL_FORCE ; - sg = umem->sg_head.sgl; -while (npages) {cond_resched (); ret = pin_user_pages_fast(cur_base,
@@ -296,11 +223,17 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, goto umem_release; cur_base += ret *PAGE_SIZE ; - npages -= ret; - - sg =ib_umem_add_sg_table (sg, page_list, ret, -dma_get_max_seg_size (device->dma_device), - &umem->sg_nents); + npages -= ret; + sg =__sg_alloc_table_from_pages ( + &umem->sg_head, page_list, ret,0 , ret <<PAGE_SHIFT , +dma_get_max_seg_size (device->dma_device), sg, npages, +GFP_KERNEL ); + umem->sg_nents = umem->sg_head.nents; +if (IS_ERR (sg)) { +unpin_user_pages_dirty_lock (page_list, ret,0 ); + ret =PTR_ERR (sg); + goto umem_release; + } }sg_mark_end (sg);
@@ -322,7 +255,6 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, umem_release:__ib_umem_release (device, umem,0 ); -vma:atomic64_sub (ib_umem_num_pages (umem), &mm->pinned_vm); out:free_page ((unsigned long ) page_list);
--
2.26.2
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jason Gunthorpe
maintainerRe: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
Quoted 13 lines · Leon Romanovsky
drivers/infiniband/core/umem.c +4
-5@@ -296,11 +223,17 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, goto umem_release; cur_base += ret *PAGE_SIZE ; - npages -= ret; - - sg =ib_umem_add_sg_table (sg, page_list, ret, -dma_get_max_seg_size (device->dma_device), - &umem->sg_nents); + npages -= ret; + sg = __sg_alloc_table_from_pages( + &umem->sg_head, page_list, ret, 0, ret << PAGE_SHIFT, + dma_get_max_seg_size(device->dma_device), sg, npages,
drivers/infiniband/core/umem.c static struct ib_umem *__ib_umem_get(struct ib_device *device, · line 239
Quoted 10 lines
drivers/infiniband/core/umem.c +7
-0+ GFP_KERNEL); + umem->sg_nents = umem->sg_head.nents; +if (IS_ERR (sg)) { +unpin_user_pages_dirty_lock (page_list, ret,0 ); + ret =PTR_ERR (sg); + goto umem_release; + } }sg_mark_end (sg);
Does it still need the sg_mark_end?
Jason
Re: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
Quoted 23 lines · Jason Gunthorpe
Quoted 22 lines · Leon Romanovsky
drivers/infiniband/core/umem.c +11
-5@@ -296,11 +223,17 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, goto umem_release; cur_base += ret *PAGE_SIZE ; - npages -= ret; - - sg =ib_umem_add_sg_table (sg, page_list, ret, -dma_get_max_seg_size (device->dma_device), - &umem->sg_nents); + npages -= ret; + sg =__sg_alloc_table_from_pages ( + &umem->sg_head, page_list, ret,0 , ret <<PAGE_SHIFT , +dma_get_max_seg_size (device->dma_device), sg, npages, +GFP_KERNEL ); + umem->sg_nents = umem->sg_head.nents; +if (IS_ERR (sg)) { +unpin_user_pages_dirty_lock (page_list, ret,0 ); + ret =PTR_ERR (sg); + goto umem_release; + } }
Quoted 3 lines
drivers/infiniband/core/umem.c static struct ib_umem *__ib_umem_get(struct ib_device *device, · line 239
Quoted 1 line
drivers/infiniband/core/umem.c +0
-0sg_mark_end (sg);Does it still need the
sg_mark_end?
It is preserved here for correctness, the release logic doesn't rely on this marker, but it is better to leave it.
Thanks
Quoted 2 lines
Jason
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jason Gunthorpe
maintainerRe: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
Quoted 24 lines · Leon Romanovsky
Quoted 23 lines · Jason Gunthorpe
Quoted 22 lines · Leon Romanovsky
drivers/infiniband/core/umem.c +11
-5@@ -296,11 +223,17 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, goto umem_release; cur_base += ret *PAGE_SIZE ; - npages -= ret; - - sg =ib_umem_add_sg_table (sg, page_list, ret, -dma_get_max_seg_size (device->dma_device), - &umem->sg_nents); + npages -= ret; + sg =__sg_alloc_table_from_pages ( + &umem->sg_head, page_list, ret,0 , ret <<PAGE_SHIFT , +dma_get_max_seg_size (device->dma_device), sg, npages, +GFP_KERNEL ); + umem->sg_nents = umem->sg_head.nents; +if (IS_ERR (sg)) { +unpin_user_pages_dirty_lock (page_list, ret,0 ); + ret =PTR_ERR (sg); + goto umem_release; + } }
Quoted 6 lines
Quoted 3 lines
drivers/infiniband/core/umem.c static struct ib_umem *__ib_umem_get(struct ib_device *device, · line 239
Quoted 1 line
drivers/infiniband/core/umem.c +0
-0sg_mark_end (sg);Does it still need the
sg_mark_end?It is preserved here for correctness, the release logic doesn't rely on this marker, but it is better to leave it.
I mean, my read of __sg_alloc_table_from_pages() is that it already placed it, the final __alloc_table() does it?
Jason
Re: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
Quoted 25 lines · Jason Gunthorpe
Quoted 24 lines · Leon Romanovsky
Quoted 23 lines · Jason Gunthorpe
Quoted 22 lines · Leon Romanovsky
drivers/infiniband/core/umem.c +11
-5@@ -296,11 +223,17 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, goto umem_release; cur_base += ret *PAGE_SIZE ; - npages -= ret; - - sg =ib_umem_add_sg_table (sg, page_list, ret, -dma_get_max_seg_size (device->dma_device), - &umem->sg_nents); + npages -= ret; + sg =__sg_alloc_table_from_pages ( + &umem->sg_head, page_list, ret,0 , ret <<PAGE_SHIFT , +dma_get_max_seg_size (device->dma_device), sg, npages, +GFP_KERNEL ); + umem->sg_nents = umem->sg_head.nents; +if (IS_ERR (sg)) { +unpin_user_pages_dirty_lock (page_list, ret,0 ); + ret =PTR_ERR (sg); + goto umem_release; + } }
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
drivers/infiniband/core/umem.c static struct ib_umem *__ib_umem_get(struct ib_device *device, · line 239
Quoted 1 line
drivers/infiniband/core/umem.c +0
-0sg_mark_end (sg);Does it still need the
sg_mark_end?It is preserved here for correctness, the release logic doesn't rely on this marker, but it is better to leave it.
I mean, my read of
__sg_alloc_table_from_pages()is that it already placed it, the final__alloc_table()does it?Jason
It marks the last allocated sge, but not the last populated sge (with page).
Jason Gunthorpe
maintainerRe: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
Quoted 27 lines · Maor Gottlieb
Quoted 25 lines · Jason Gunthorpe
Quoted 24 lines · Leon Romanovsky
Quoted 23 lines · Jason Gunthorpe
Quoted 22 lines · Leon Romanovsky
drivers/infiniband/core/umem.c +11
-5@@ -296,11 +223,17 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, goto umem_release; cur_base += ret *PAGE_SIZE ; - npages -= ret; - - sg =ib_umem_add_sg_table (sg, page_list, ret, -dma_get_max_seg_size (device->dma_device), - &umem->sg_nents); + npages -= ret; + sg =__sg_alloc_table_from_pages ( + &umem->sg_head, page_list, ret,0 , ret <<PAGE_SHIFT , +dma_get_max_seg_size (device->dma_device), sg, npages, +GFP_KERNEL ); + umem->sg_nents = umem->sg_head.nents; +if (IS_ERR (sg)) { +unpin_user_pages_dirty_lock (page_list, ret,0 ); + ret =PTR_ERR (sg); + goto umem_release; + } }
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
drivers/infiniband/core/umem.c static struct ib_umem *__ib_umem_get(struct ib_device *device, · line 239
Quoted 1 line
drivers/infiniband/core/umem.c +0
-0sg_mark_end (sg);Does it still need the
sg_mark_end?It is preserved here for correctness, the release logic doesn't rely on this marker, but it is better to leave it.
I mean, my read of
__sg_alloc_table_from_pages()is that it already placed it, the final__alloc_table()does it?It marks the last allocated sge, but not the last populated sge (with page).
Why are those different?
It looks like the last iteration calls __alloc_table() with an exact number of sges
+ if (!prv) {
+ /* Only the last allocation could be less than the maximum */
+ table_size = left_pages ? SG_MAX_SINGLE_ALLOC : chunks;
+ ret = sg_alloc_table(sgt, table_size, gfp_mask);
+ if (unlikely(ret))
+ return ERR_PTR(ret);
+ }
Jason
Re: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
Quoted 47 lines · Jason Gunthorpe
Quoted 26 lines · Maor Gottlieb
Quoted 25 lines · Jason Gunthorpe
Quoted 24 lines · Leon Romanovsky
Quoted 23 lines · Jason Gunthorpe
Quoted 22 lines · Leon Romanovsky
drivers/infiniband/core/umem.c +11
-5@@ -296,11 +223,17 @@ static struct ib_umem *__ib_umem_get(struct ib_device *device, goto umem_release; cur_base += ret *PAGE_SIZE ; - npages -= ret; - - sg =ib_umem_add_sg_table (sg, page_list, ret, -dma_get_max_seg_size (device->dma_device), - &umem->sg_nents); + npages -= ret; + sg =__sg_alloc_table_from_pages ( + &umem->sg_head, page_list, ret,0 , ret <<PAGE_SHIFT , +dma_get_max_seg_size (device->dma_device), sg, npages, +GFP_KERNEL ); + umem->sg_nents = umem->sg_head.nents; +if (IS_ERR (sg)) { +unpin_user_pages_dirty_lock (page_list, ret,0 ); + ret =PTR_ERR (sg); + goto umem_release; + } }Quoted 7 lines
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
drivers/infiniband/core/umem.c static struct ib_umem *__ib_umem_get(struct ib_device *device, · line 239
Quoted 1 line
drivers/infiniband/core/umem.c +0
-0sg_mark_end (sg);Does it still need the
sg_mark_end?It is preserved here for correctness, the release logic doesn't rely on this marker, but it is better to leave it.
I mean, my read of
__sg_alloc_table_from_pages()is that it already placed it, the final__alloc_table()does it?It marks the last allocated sge, but not the last populated sge (with page).
Why are those different?
It looks like the last iteration calls
__alloc_table()with an exact number of sges(quoted diff) +7
-0+ if (!prv) { + /* Only the last allocation could be less than the maximum */ + table_size = left_pages ? SG_MAX_SINGLE_ALLOC : chunks; + ret = sg_alloc_table(sgt, table_size, gfp_mask); + if (unlikely(ret)) + return ERR_PTR(ret); + }
Quoted 1 line
Jason
This is right only for the last iteration. E.g. in the first iteration in case that there are more pages (left_pages), then we allocate SG_MAX_SINGLE_ALLOC. We don't know how many pages from the second iteration will be squashed to the SGE from the first iteration.
Jason Gunthorpe
maintainerRe: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
Quoted 4 lines · Maor Gottlieb
This is right only for the last iteration. E.g. in the first iteration in case that there are more pages (
left_pages), then we allocate SG_MAX_SINGLE_ALLOC. We don't know how many pages from the second iteration will be squashed to the SGE from the first iteration.
Well, it is 0 or 1 SGE's. Check if the first page is mergable and subtract one from the required length?
I dislike this sg_mark_end() it is something that should be internal, IMHO.
Jason
Re: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
Quoted 10 lines · Jason Gunthorpe
Quoted 4 lines · Maor Gottlieb
This is right only for the last iteration. E.g. in the first iteration in case that there are more pages (
left_pages), then we allocate SG_MAX_SINGLE_ALLOC. We don't know how many pages from the second iteration will be squashed to the SGE from the first iteration.Well, it is 0 or 1 SGE's. Check if the first page is mergable and subtract one from the required length?
I dislike this
sg_mark_end()it is something that should be internal, IMHO.
I can move it to __sg_alloc_table_from_pages:
sgt->nents = tmp_nents;
+ if (!left_pages)
+ sg_mark_end(s);
out:
return s;
Quoted 2 lines
Jason
Re: [PATCH rdma-next v4 4/4] RDMA/umem: Move to allocate SG table from pages
In reply to Jason GunthorpeQuoted 11 lines · Jason Gunthorpe
Quoted 4 lines · Maor Gottlieb
This is right only for the last iteration. E.g. in the first iteration in case that there are more pages (
left_pages), then we allocate SG_MAX_SINGLE_ALLOC. We don't know how many pages from the second iteration will be squashed to the SGE from the first iteration.Well, it is 0 or 1 SGE's. Check if the first page is mergable and subtract one from the required length?
I dislike this
sg_mark_end()it is something that should be internal, IMHO.
I don't think so, but Maor provided possible solution. Can you take the patches?
Thanks
Quoted 2 lines
Jason
Patchwork
CI[Intel-gfx] ✗ Fi.CI.BUILD: failure for Dynamicaly allocate SG table from the pages (rev2)
In reply to Leon Romanovsky== Series Details ==
== Series Details ==
Series: Dynamicaly allocate SG table from the pages (rev2)
URL : https://patchwork.freedesktop.org/series/81962/
State : failure
== Summary ==
Applying: This series extends __sg_alloc_table_from_pages to allow chaining of
error: sha1 information is lacking or useless (tools/testing/scatterlist/main.c).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch=diff' to see the failed patch
Patch failed at 0001 This series extends __sg_alloc_table_from_pages to allow chaining of When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx