spi: fsl-dspi: fix NULL pointer dereference
Subsystems (2)
PATCH 1/1 spi: fsl-dspi: fix NULL pointer dereference
Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path") this driver causes a kernel oops:
[ 1.891065] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 1.899889] Mem abort info: [ 1.902692] ESR = 0x96000004 [ 1.905754] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.911089] SET = 0, FnV = 0 [ 1.914156] EA = 0, S1PTW = 0 [ 1.917303] Data abort info: [ 1.920193] ISV = 0, ISS = 0x00000004 [ 1.924044] CM = 0, WnR = 0 [ 1.927022] [0000000000000080] user address but active_mm is swapper [ 1.933403] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.938995] Modules linked in: [ 1.942060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc6-next-20200925-00026-gae556cc74e28-dirty #94 [ 1.951838] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 1.960135] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 1.966168] pc : dspi_setup+0xc8/0x2e0 [ 1.969926] lr : dspi_setup+0xbc/0x2e0 [ 1.973684] sp : ffff80001139b930 [ 1.977005] x29: ffff80001139b930 x28: ffff00207a5d2000 [ 1.982338] x27: 0000000000000006 x26: ffff00207a44d410 [ 1.987669] x25: ffff002079c08100 x24: ffff00207a5d2400 [ 1.993000] x23: ffff00207a5d2600 x22: ffff800011169948 [ 1.998332] x21: ffff800010cbcd20 x20: ffff00207a58a800 [ 2.003663] x19: ffff00207a76b700 x18: 0000000000000010 [ 2.008994] x17: 0000000000000001 x16: 0000000000000019 [ 2.014326] x15: ffffffffffffffff x14: 0720072007200720 [ 2.019657] x13: 0720072007200720 x12: ffff8000111fc5e0 [ 2.024989] x11: 0000000000000003 x10: ffff8000111e45a0 [ 2.030320] x9 : 0000000000000000 x8 : ffff00207a76b780 [ 2.035651] x7 : 0000000000000000 x6 : 000000000000003f [ 2.040982] x5 : 0000000000000040 x4 : ffff80001139b918 [ 2.046313] x3 : 0000000000000001 x2 : 64b62cc917af5100 [ 2.051643] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.056973] Call trace: [ 2.059425] dspi_setup+0xc8/0x2e0 [ 2.062837] spi_setup+0xcc/0x248 [ 2.066160] spi_add_device+0xb4/0x198 [ 2.069918] of_register_spi_device+0x250/0x370 [ 2.074462] spi_register_controller+0x4f4/0x770 [ 2.079094] dspi_probe+0x5bc/0x7b0 [ 2.082594] platform_drv_probe+0x5c/0xb0 [ 2.086615] really_probe+0xec/0x3c0 [ 2.090200] driver_probe_device+0x60/0xc0 [ 2.094308] device_driver_attach+0x7c/0x88 [ 2.098503] __driver_attach+0x60/0xe8 [ 2.102263] bus_for_each_dev+0x7c/0xd0 [ 2.106109] driver_attach+0x2c/0x38 [ 2.109692] bus_add_driver+0x194/0x1f8 [ 2.113538] driver_register+0x6c/0x128 [ 2.117385] __platform_driver_register+0x50/0x60 [ 2.122105] fsl_dspi_driver_init+0x24/0x30 [ 2.126302] do_one_initcall+0x54/0x2d0 [ 2.130149] kernel_init_freeable+0x1ec/0x258 [ 2.134520] kernel_init+0x1c/0x120 [ 2.138018] ret_from_fork+0x10/0x34 [ 2.141606] Code: 97e0b11d aa0003f3 b4000680 f94006e0 (f9404000) [ 2.147723] ---[ end trace 26cf63e6cbba33a8 ]--- [ 2.152374] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.160061] SMP: stopping secondary CPUs [ 2.163999] Kernel Offset: disabled [ 2.167496] CPU features: 0x0040022,20006008 [ 2.171777] Memory Limit: none [ 2.174840] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
This is because since this commit, the allocation of the drivers private data is done explicitly and in this case spi_alloc_master() won't set the correct pointer.
--- drivers/spi/spi-fsl-dspi.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/spi/spi-fsl-dspi.c +2 -0
@@ -1236,6 +1236,8 @@ static int dspi_probe(struct platform_device *pdev)if (!ctlr)return -ENOMEM ; +spi_controller_set_devdata (ctlr, dspi); + dspi->pdev = pdev; dspi->ctlr = ctlr;
Signature · 1 line
2.20.1
Vladimir Oltean
maintainerQuoted 67 lines · Michael Walle
Since commit
530b5affc675("spi: fsl-dspi: fix use-after-free in remove path") this driver causes a kernel oops:[ 1.891065] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 1.899889] Mem abort info: [ 1.902692] ESR = 0x96000004 [ 1.905754] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.911089] SET = 0, FnV = 0 [ 1.914156] EA = 0, S1PTW = 0 [ 1.917303] Data abort info: [ 1.920193] ISV = 0, ISS = 0x00000004 [ 1.924044] CM = 0, WnR = 0 [ 1.927022] [0000000000000080] user address but active_mm is swapper [ 1.933403] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.938995] Modules linked in: [ 1.942060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc6-next-20200925-00026-gae556cc74e28-dirty #94 [ 1.951838] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 1.960135] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 1.966168] pc : dspi_setup+0xc8/0x2e0 [ 1.969926] lr : dspi_setup+0xbc/0x2e0 [ 1.973684] sp : ffff80001139b930 [ 1.977005] x29: ffff80001139b930 x28: ffff00207a5d2000 [ 1.982338] x27: 0000000000000006 x26: ffff00207a44d410 [ 1.987669] x25: ffff002079c08100 x24: ffff00207a5d2400 [ 1.993000] x23: ffff00207a5d2600 x22: ffff800011169948 [ 1.998332] x21: ffff800010cbcd20 x20: ffff00207a58a800 [ 2.003663] x19: ffff00207a76b700 x18: 0000000000000010 [ 2.008994] x17: 0000000000000001 x16: 0000000000000019 [ 2.014326] x15: ffffffffffffffff x14: 0720072007200720 [ 2.019657] x13: 0720072007200720 x12: ffff8000111fc5e0 [ 2.024989] x11: 0000000000000003 x10: ffff8000111e45a0 [ 2.030320] x9 : 0000000000000000 x8 : ffff00207a76b780 [ 2.035651] x7 : 0000000000000000 x6 : 000000000000003f [ 2.040982] x5 : 0000000000000040 x4 : ffff80001139b918 [ 2.046313] x3 : 0000000000000001 x2 : 64b62cc917af5100 [ 2.051643] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.056973] Call trace: [ 2.059425] dspi_setup+0xc8/0x2e0 [ 2.062837] spi_setup+0xcc/0x248 [ 2.066160] spi_add_device+0xb4/0x198 [ 2.069918] of_register_spi_device+0x250/0x370 [ 2.074462] spi_register_controller+0x4f4/0x770 [ 2.079094] dspi_probe+0x5bc/0x7b0 [ 2.082594] platform_drv_probe+0x5c/0xb0 [ 2.086615] really_probe+0xec/0x3c0 [ 2.090200] driver_probe_device+0x60/0xc0 [ 2.094308] device_driver_attach+0x7c/0x88 [ 2.098503] __driver_attach+0x60/0xe8 [ 2.102263] bus_for_each_dev+0x7c/0xd0 [ 2.106109] driver_attach+0x2c/0x38 [ 2.109692] bus_add_driver+0x194/0x1f8 [ 2.113538] driver_register+0x6c/0x128 [ 2.117385] __platform_driver_register+0x50/0x60 [ 2.122105] fsl_dspi_driver_init+0x24/0x30 [ 2.126302] do_one_initcall+0x54/0x2d0 [ 2.130149] kernel_init_freeable+0x1ec/0x258 [ 2.134520] kernel_init+0x1c/0x120 [ 2.138018] ret_from_fork+0x10/0x34 [ 2.141606] Code: 97e0b11d aa0003f3 b4000680 f94006e0 (f9404000) [ 2.147723] ---[ end trace 26cf63e6cbba33a8 ]--- [ 2.152374] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.160061] SMP: stopping secondary CPUs [ 2.163999] Kernel Offset: disabled [ 2.167496] CPU features: 0x0040022,20006008 [ 2.171777] Memory Limit: none [ 2.174840] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Quoted 7 lines
This is because since this commit, the allocation of the drivers private data is done explicitly and in this case
spi_alloc_master()won't set the correct pointer.Fixes 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")Signed-off-by Michael Walle <[email protected]>---
Sascha, how did you test commit 530b5affc675?
Quoted 19 lines
drivers/spi/spi-fsl-dspi.c | 2 ++ 1 file changed, 2 insertions(+)drivers/spi/spi-fsl-dspi.c +2
-0@@ -1236,6 +1236,8 @@ static int dspi_probe(struct platform_device *pdev)if (!ctlr)return -ENOMEM ; +spi_controller_set_devdata (ctlr, dspi); + dspi->pdev = pdev; dspi->ctlr = ctlr;Signature · 1 line
2.20.1
Thanks,
-Vladimir
Quoted 73 lines · Vladimir Oltean
Quoted 71 lines · Michael Walle
Since commit
530b5affc675("spi: fsl-dspi: fix use-after-free in remove path") this driver causes a kernel oops:[ 1.891065] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 1.899889] Mem abort info: [ 1.902692] ESR = 0x96000004 [ 1.905754] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.911089] SET = 0, FnV = 0 [ 1.914156] EA = 0, S1PTW = 0 [ 1.917303] Data abort info: [ 1.920193] ISV = 0, ISS = 0x00000004 [ 1.924044] CM = 0, WnR = 0 [ 1.927022] [0000000000000080] user address but active_mm is swapper [ 1.933403] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.938995] Modules linked in: [ 1.942060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc6-next-20200925-00026-gae556cc74e28-dirty #94 [ 1.951838] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 1.960135] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 1.966168] pc : dspi_setup+0xc8/0x2e0 [ 1.969926] lr : dspi_setup+0xbc/0x2e0 [ 1.973684] sp : ffff80001139b930 [ 1.977005] x29: ffff80001139b930 x28: ffff00207a5d2000 [ 1.982338] x27: 0000000000000006 x26: ffff00207a44d410 [ 1.987669] x25: ffff002079c08100 x24: ffff00207a5d2400 [ 1.993000] x23: ffff00207a5d2600 x22: ffff800011169948 [ 1.998332] x21: ffff800010cbcd20 x20: ffff00207a58a800 [ 2.003663] x19: ffff00207a76b700 x18: 0000000000000010 [ 2.008994] x17: 0000000000000001 x16: 0000000000000019 [ 2.014326] x15: ffffffffffffffff x14: 0720072007200720 [ 2.019657] x13: 0720072007200720 x12: ffff8000111fc5e0 [ 2.024989] x11: 0000000000000003 x10: ffff8000111e45a0 [ 2.030320] x9 : 0000000000000000 x8 : ffff00207a76b780 [ 2.035651] x7 : 0000000000000000 x6 : 000000000000003f [ 2.040982] x5 : 0000000000000040 x4 : ffff80001139b918 [ 2.046313] x3 : 0000000000000001 x2 : 64b62cc917af5100 [ 2.051643] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.056973] Call trace: [ 2.059425] dspi_setup+0xc8/0x2e0 [ 2.062837] spi_setup+0xcc/0x248 [ 2.066160] spi_add_device+0xb4/0x198 [ 2.069918] of_register_spi_device+0x250/0x370 [ 2.074462] spi_register_controller+0x4f4/0x770 [ 2.079094] dspi_probe+0x5bc/0x7b0 [ 2.082594] platform_drv_probe+0x5c/0xb0 [ 2.086615] really_probe+0xec/0x3c0 [ 2.090200] driver_probe_device+0x60/0xc0 [ 2.094308] device_driver_attach+0x7c/0x88 [ 2.098503] __driver_attach+0x60/0xe8 [ 2.102263] bus_for_each_dev+0x7c/0xd0 [ 2.106109] driver_attach+0x2c/0x38 [ 2.109692] bus_add_driver+0x194/0x1f8 [ 2.113538] driver_register+0x6c/0x128 [ 2.117385] __platform_driver_register+0x50/0x60 [ 2.122105] fsl_dspi_driver_init+0x24/0x30 [ 2.126302] do_one_initcall+0x54/0x2d0 [ 2.130149] kernel_init_freeable+0x1ec/0x258 [ 2.134520] kernel_init+0x1c/0x120 [ 2.138018] ret_from_fork+0x10/0x34 [ 2.141606] Code: 97e0b11d aa0003f3 b4000680 f94006e0 (f9404000) [ 2.147723] ---[ end trace 26cf63e6cbba33a8 ]--- [ 2.152374] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.160061] SMP: stopping secondary CPUs [ 2.163999] Kernel Offset: disabled [ 2.167496] CPU features: 0x0040022,20006008 [ 2.171777] Memory Limit: none [ 2.174840] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---This is because since this commit, the allocation of the drivers private data is done explicitly and in this case
spi_alloc_master()won't set the correct pointer.
Quoted 5 lines
Quoted 3 lines
Fixes 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")Signed-off-by Michael Walle <[email protected]>---
Sascha, how did you test commit
530b5affc675?
Hi,
I just hit it on my Vybrid systems as well. It fails on every boot, so I have doubts that it was actually tested. The fix was posted on 23rd and applied within a few hours... also no time for anyone else to test it.
Quoted 12 lines
Quoted 12 lines
drivers/spi/spi-fsl-dspi.c | 2 ++ 1 file changed, 2 insertions(+)drivers/spi/spi-fsl-dspi.c +0
-0@@ -1236,6 +1236,8 @@ static int dspi_probe(struct platform_device *pdev)if (!ctlr)return -ENOMEM ;
Quoted 1 line
drivers/spi/spi-fsl-dspi.c static int dspi_probe(struct platform_device *pdev) · line 1239
Quoted 1 line
drivers/spi/spi-fsl-dspi.c +1
-0+spi_controller_set_devdata (ctlr, dspi);
Michael,
How about moving here platform_set_drvdata(pdev, dspi) from the end of the probe to keep them close to each other?
Best regards,
Krzysztof
Quoted 10 lines
Quoted 7 lines
drivers/spi/spi-fsl-dspi.c +1
-1+ dspi->pdev = pdev; dspi->ctlr = ctlr; --2.20.1
Thanks,
-Vladimir
Quoted 9 lines · Krzysztof Kozlowski
Quoted 9 lines
Quoted 8 lines
This is because since this commit, the allocation of the drivers private data is done explicitly and in this case
spi_alloc_master()won't set the correct pointer.Fixes 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")Signed-off-by Michael Walle <[email protected]>---
Quoted 8 lines
Quoted 1 line
Sascha, how did you test commit
530b5affc675?Hi,
I just hit it on my Vybrid systems as well. It fails on every boot, so I have doubts that it was actually tested. The fix was posted on 23rd and applied within a few hours... also no time for anyone else to test it.
The flow of this patch to mainline/RC reminds me what Sasha Levin was saying here:
https://lwn.net/Articles/753329/
" - This means that -rc commits mostly end up replacing obvious bugs with less obvious ones.
- A merge window commit spent 50% more days, on average, in -next
than a -rc commit."
Best regards,
Krzysztof
Am 2020-09-28 09:29, schrieb Krzysztof Kozlowski:
Quoted 78 lines · Vladimir Oltean
Quoted 77 lines · Michael Walle
Quoted 74 lines
Since commit
530b5affc675("spi: fsl-dspi: fix use-after-free in remove path") this driver causes a kernel oops:[ 1.891065] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 1.899889] Mem abort info: [ 1.902692] ESR = 0x96000004 [ 1.905754] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.911089] SET = 0, FnV = 0 [ 1.914156] EA = 0, S1PTW = 0 [ 1.917303] Data abort info: [ 1.920193] ISV = 0, ISS = 0x00000004 [ 1.924044] CM = 0, WnR = 0 [ 1.927022] [0000000000000080] user address but active_mm is swapper [ 1.933403] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.938995] Modules linked in: [ 1.942060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc6-next-20200925-00026-gae556cc74e28-dirty #94 [ 1.951838] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 1.960135] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 1.966168] pc : dspi_setup+0xc8/0x2e0 [ 1.969926] lr : dspi_setup+0xbc/0x2e0 [ 1.973684] sp : ffff80001139b930 [ 1.977005] x29: ffff80001139b930 x28: ffff00207a5d2000 [ 1.982338] x27: 0000000000000006 x26: ffff00207a44d410 [ 1.987669] x25: ffff002079c08100 x24: ffff00207a5d2400 [ 1.993000] x23: ffff00207a5d2600 x22: ffff800011169948 [ 1.998332] x21: ffff800010cbcd20 x20: ffff00207a58a800 [ 2.003663] x19: ffff00207a76b700 x18: 0000000000000010 [ 2.008994] x17: 0000000000000001 x16: 0000000000000019 [ 2.014326] x15: ffffffffffffffff x14: 0720072007200720 [ 2.019657] x13: 0720072007200720 x12: ffff8000111fc5e0 [ 2.024989] x11: 0000000000000003 x10: ffff8000111e45a0 [ 2.030320] x9 : 0000000000000000 x8 : ffff00207a76b780 [ 2.035651] x7 : 0000000000000000 x6 : 000000000000003f [ 2.040982] x5 : 0000000000000040 x4 : ffff80001139b918 [ 2.046313] x3 : 0000000000000001 x2 : 64b62cc917af5100 [ 2.051643] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.056973] Call trace: [ 2.059425] dspi_setup+0xc8/0x2e0 [ 2.062837] spi_setup+0xcc/0x248 [ 2.066160] spi_add_device+0xb4/0x198 [ 2.069918] of_register_spi_device+0x250/0x370 [ 2.074462] spi_register_controller+0x4f4/0x770 [ 2.079094] dspi_probe+0x5bc/0x7b0 [ 2.082594] platform_drv_probe+0x5c/0xb0 [ 2.086615] really_probe+0xec/0x3c0 [ 2.090200] driver_probe_device+0x60/0xc0 [ 2.094308] device_driver_attach+0x7c/0x88 [ 2.098503] __driver_attach+0x60/0xe8 [ 2.102263] bus_for_each_dev+0x7c/0xd0 [ 2.106109] driver_attach+0x2c/0x38 [ 2.109692] bus_add_driver+0x194/0x1f8 [ 2.113538] driver_register+0x6c/0x128 [ 2.117385] __platform_driver_register+0x50/0x60 [ 2.122105] fsl_dspi_driver_init+0x24/0x30 [ 2.126302] do_one_initcall+0x54/0x2d0 [ 2.130149] kernel_init_freeable+0x1ec/0x258 [ 2.134520] kernel_init+0x1c/0x120 [ 2.138018] ret_from_fork+0x10/0x34 [ 2.141606] Code: 97e0b11d aa0003f3 b4000680 f94006e0 (f9404000) [ 2.147723] ---[ end trace 26cf63e6cbba33a8 ]--- [ 2.152374] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.160061] SMP: stopping secondary CPUs [ 2.163999] Kernel Offset: disabled [ 2.167496] CPU features: 0x0040022,20006008 [ 2.171777] Memory Limit: none [ 2.174840] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---This is because since this commit, the allocation of the drivers private data is done explicitly and in this case
spi_alloc_master()won't set the correct pointer.Fixes 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")Signed-off-by Michael Walle <[email protected]>---
Quoted 8 lines
Quoted 1 line
Sascha, how did you test commit
530b5affc675?Hi,
I just hit it on my Vybrid systems as well. It fails on every boot, so I have doubts that it was actually tested. The fix was posted on 23rd and applied within a few hours... also no time for anyone else to test it.
Mhh, given the benefit of the doubt, I could imagine that the allocs align up in a way, that the pointer is valid afterwards, no?
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
drivers/spi/spi-fsl-dspi.c | 2 ++ 1 file changed, 2 insertions(+)drivers/spi/spi-fsl-dspi.c +0
-0@@ -1236,6 +1236,8 @@ static int dspi_probe(struct platform_device *pdev)if (!ctlr)return -ENOMEM ;
Quoted 6 lines
Quoted 1 line
drivers/spi/spi-fsl-dspi.c static int dspi_probe(struct platform_device *pdev) · line 1239
Quoted 1 line
drivers/spi/spi-fsl-dspi.c +1
-0+spi_controller_set_devdata (ctlr, dspi);Michael,
How about moving here
platform_set_drvdata(pdev, dspi)from the end of the probe to keep them close to each other?
Given that this patch has a fixes tag, I'd rather keep the changes to a minimum to avoid future conflicts.
OTOH I don't know if its better if the "move platform_set_drvdata()" is in a seperate patch, conflict-wise.
Any suggestions?
-michael
Quoted 83 lines · Michael Walle
Am 2020-09-28 09:29, schrieb Krzysztof Kozlowski:
Quoted 82 lines · Vladimir Oltean
Quoted 73 lines · Michael Walle
Quoted 71 lines
Since commit
530b5affc675("spi: fsl-dspi: fix use-after-free in remove path") this driver causes a kernel oops:[ 1.891065] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 1.899889] Mem abort info: [ 1.902692] ESR = 0x96000004 [ 1.905754] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.911089] SET = 0, FnV = 0 [ 1.914156] EA = 0, S1PTW = 0 [ 1.917303] Data abort info: [ 1.920193] ISV = 0, ISS = 0x00000004 [ 1.924044] CM = 0, WnR = 0 [ 1.927022] [0000000000000080] user address but active_mm is swapper [ 1.933403] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.938995] Modules linked in: [ 1.942060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc6-next-20200925-00026-gae556cc74e28-dirty #94 [ 1.951838] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 1.960135] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 1.966168] pc : dspi_setup+0xc8/0x2e0 [ 1.969926] lr : dspi_setup+0xbc/0x2e0 [ 1.973684] sp : ffff80001139b930 [ 1.977005] x29: ffff80001139b930 x28: ffff00207a5d2000 [ 1.982338] x27: 0000000000000006 x26: ffff00207a44d410 [ 1.987669] x25: ffff002079c08100 x24: ffff00207a5d2400 [ 1.993000] x23: ffff00207a5d2600 x22: ffff800011169948 [ 1.998332] x21: ffff800010cbcd20 x20: ffff00207a58a800 [ 2.003663] x19: ffff00207a76b700 x18: 0000000000000010 [ 2.008994] x17: 0000000000000001 x16: 0000000000000019 [ 2.014326] x15: ffffffffffffffff x14: 0720072007200720 [ 2.019657] x13: 0720072007200720 x12: ffff8000111fc5e0 [ 2.024989] x11: 0000000000000003 x10: ffff8000111e45a0 [ 2.030320] x9 : 0000000000000000 x8 : ffff00207a76b780 [ 2.035651] x7 : 0000000000000000 x6 : 000000000000003f [ 2.040982] x5 : 0000000000000040 x4 : ffff80001139b918 [ 2.046313] x3 : 0000000000000001 x2 : 64b62cc917af5100 [ 2.051643] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.056973] Call trace: [ 2.059425] dspi_setup+0xc8/0x2e0 [ 2.062837] spi_setup+0xcc/0x248 [ 2.066160] spi_add_device+0xb4/0x198 [ 2.069918] of_register_spi_device+0x250/0x370 [ 2.074462] spi_register_controller+0x4f4/0x770 [ 2.079094] dspi_probe+0x5bc/0x7b0 [ 2.082594] platform_drv_probe+0x5c/0xb0 [ 2.086615] really_probe+0xec/0x3c0 [ 2.090200] driver_probe_device+0x60/0xc0 [ 2.094308] device_driver_attach+0x7c/0x88 [ 2.098503] __driver_attach+0x60/0xe8 [ 2.102263] bus_for_each_dev+0x7c/0xd0 [ 2.106109] driver_attach+0x2c/0x38 [ 2.109692] bus_add_driver+0x194/0x1f8 [ 2.113538] driver_register+0x6c/0x128 [ 2.117385] __platform_driver_register+0x50/0x60 [ 2.122105] fsl_dspi_driver_init+0x24/0x30 [ 2.126302] do_one_initcall+0x54/0x2d0 [ 2.130149] kernel_init_freeable+0x1ec/0x258 [ 2.134520] kernel_init+0x1c/0x120 [ 2.138018] ret_from_fork+0x10/0x34 [ 2.141606] Code: 97e0b11d aa0003f3 b4000680 f94006e0 (f9404000) [ 2.147723] ---[ end trace 26cf63e6cbba33a8 ]--- [ 2.152374] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.160061] SMP: stopping secondary CPUs [ 2.163999] Kernel Offset: disabled [ 2.167496] CPU features: 0x0040022,20006008 [ 2.171777] Memory Limit: none [ 2.174840] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---This is because since this commit, the allocation of the drivers private data is done explicitly and in this case
spi_alloc_master()won't set the correct pointer.Quoted 5 lines
Quoted 3 lines
Fixes 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")Signed-off-by Michael Walle <[email protected]>---
Sascha, how did you test commit
530b5affc675?Hi,
Quoted 7 lines
Quoted 4 lines
I just hit it on my Vybrid systems as well. It fails on every boot, so I have doubts that it was actually tested. The fix was posted on 23rd and applied within a few hours... also no time for anyone else to test it.
Mhh, given the benefit of the doubt, I could imagine that the allocs align up in a way, that the pointer is valid afterwards, no?
Or Sasha used generic evalkit board, where SPI by default might not have any devices attached.
Quoted 16 lines
Quoted 16 lines
Quoted 12 lines
Quoted 12 lines
drivers/spi/spi-fsl-dspi.c | 2 ++ 1 file changed, 2 insertions(+)drivers/spi/spi-fsl-dspi.c +0
-0@@ -1236,6 +1236,8 @@ static int dspi_probe(struct platform_device *pdev)if (!ctlr)return -ENOMEM ;Quoted 1 line
drivers/spi/spi-fsl-dspi.c static int dspi_probe(struct platform_device *pdev) · line 1239
Quoted 1 line
drivers/spi/spi-fsl-dspi.c +1
-0+spi_controller_set_devdata (ctlr, dspi);Michael,
Quoted 8 lines
Quoted 2 lines
How about moving here
platform_set_drvdata(pdev, dspi)from the end of the probe to keep them close to each other?Given that this patch has a fixes tag, I'd rather keep the changes to a minimum to avoid future conflicts.
OTOH I don't know if its better if the "move
platform_set_drvdata()" is in a seperate patch, conflict-wise.
Just looking at these two patches there are no worries:
1. The original patch does not target stable,
2. The fix is only for this cycle.
However it is likely that autosel will pick up these patches so your questions are good. If I understand code correctly, these two calls (spi_controller_set_devdata and platform_set_drvdata) can be reordered freely between allocation and spi_register_controller(). Therefore moving these calls around should not affect backporting to stable.
I would propose to keep these calls together, either at beginning or just before spi_register_controller().
Best regards,
Krzysztof
Quoted 4 lines
Any suggestions?
-michael
Sascha Hauer
Tested-byQuoted 72 lines · Vladimir Oltean
Quoted 71 lines · Michael Walle
Since commit
530b5affc675("spi: fsl-dspi: fix use-after-free in remove path") this driver causes a kernel oops:[ 1.891065] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 1.899889] Mem abort info: [ 1.902692] ESR = 0x96000004 [ 1.905754] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.911089] SET = 0, FnV = 0 [ 1.914156] EA = 0, S1PTW = 0 [ 1.917303] Data abort info: [ 1.920193] ISV = 0, ISS = 0x00000004 [ 1.924044] CM = 0, WnR = 0 [ 1.927022] [0000000000000080] user address but active_mm is swapper [ 1.933403] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 1.938995] Modules linked in: [ 1.942060] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc6-next-20200925-00026-gae556cc74e28-dirty #94 [ 1.951838] Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) [ 1.960135] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 1.966168] pc : dspi_setup+0xc8/0x2e0 [ 1.969926] lr : dspi_setup+0xbc/0x2e0 [ 1.973684] sp : ffff80001139b930 [ 1.977005] x29: ffff80001139b930 x28: ffff00207a5d2000 [ 1.982338] x27: 0000000000000006 x26: ffff00207a44d410 [ 1.987669] x25: ffff002079c08100 x24: ffff00207a5d2400 [ 1.993000] x23: ffff00207a5d2600 x22: ffff800011169948 [ 1.998332] x21: ffff800010cbcd20 x20: ffff00207a58a800 [ 2.003663] x19: ffff00207a76b700 x18: 0000000000000010 [ 2.008994] x17: 0000000000000001 x16: 0000000000000019 [ 2.014326] x15: ffffffffffffffff x14: 0720072007200720 [ 2.019657] x13: 0720072007200720 x12: ffff8000111fc5e0 [ 2.024989] x11: 0000000000000003 x10: ffff8000111e45a0 [ 2.030320] x9 : 0000000000000000 x8 : ffff00207a76b780 [ 2.035651] x7 : 0000000000000000 x6 : 000000000000003f [ 2.040982] x5 : 0000000000000040 x4 : ffff80001139b918 [ 2.046313] x3 : 0000000000000001 x2 : 64b62cc917af5100 [ 2.051643] x1 : 0000000000000000 x0 : 0000000000000000 [ 2.056973] Call trace: [ 2.059425] dspi_setup+0xc8/0x2e0 [ 2.062837] spi_setup+0xcc/0x248 [ 2.066160] spi_add_device+0xb4/0x198 [ 2.069918] of_register_spi_device+0x250/0x370 [ 2.074462] spi_register_controller+0x4f4/0x770 [ 2.079094] dspi_probe+0x5bc/0x7b0 [ 2.082594] platform_drv_probe+0x5c/0xb0 [ 2.086615] really_probe+0xec/0x3c0 [ 2.090200] driver_probe_device+0x60/0xc0 [ 2.094308] device_driver_attach+0x7c/0x88 [ 2.098503] __driver_attach+0x60/0xe8 [ 2.102263] bus_for_each_dev+0x7c/0xd0 [ 2.106109] driver_attach+0x2c/0x38 [ 2.109692] bus_add_driver+0x194/0x1f8 [ 2.113538] driver_register+0x6c/0x128 [ 2.117385] __platform_driver_register+0x50/0x60 [ 2.122105] fsl_dspi_driver_init+0x24/0x30 [ 2.126302] do_one_initcall+0x54/0x2d0 [ 2.130149] kernel_init_freeable+0x1ec/0x258 [ 2.134520] kernel_init+0x1c/0x120 [ 2.138018] ret_from_fork+0x10/0x34 [ 2.141606] Code: 97e0b11d aa0003f3 b4000680 f94006e0 (f9404000) [ 2.147723] ---[ end trace 26cf63e6cbba33a8 ]--- [ 2.152374] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.160061] SMP: stopping secondary CPUs [ 2.163999] Kernel Offset: disabled [ 2.167496] CPU features: 0x0040022,20006008 [ 2.171777] Memory Limit: none [ 2.174840] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---This is because since this commit, the allocation of the drivers private data is done explicitly and in this case
spi_alloc_master()won't set the correct pointer.
Quoted 5 lines
Quoted 3 lines
Fixes 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")Signed-off-by Michael Walle <[email protected]>---
Sascha, how did you test commit
530b5affc675?
My intention was to test it, but it seems I somehow failed to copy the new kernel onto my target without noticing it, shame on me. Anyway, I get the same kernel panic with my patch appied now and this patch fixes it.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |