Skip to contentSkip to conversation

stmmac: intel: Adding ref clock 1us tic for LPI cntr

PATCH Applied Voon Weifeng 2 participants 2 messages Sep 28, 2020 – Sep 29, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 stmmac: intel: Adding ref clock 1us tic for LPI cntr

From: Rusaimi Amira Ruslan <[email protected]>

Adding reference clock (1us tic) for all LPI timer on Intel platforms. The reference clock is derived from ptp clk. This also enables all LPI counter.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c | 9 +++++++++
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c      | 9 +++++++++
 include/linux/stmmac.h                                 | 1 +
 3 files changed, 19 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c +9 -0
index b1323d5c95b5..f61cb997a8f6 100644
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/stmmac.h>
 
+#include "dwmac4.h"
 #include "stmmac.h"
 #include "stmmac_platform.h"
 
@@ -146,6 +147,14 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
 	}
 
 	plat_dat->bsp_priv = dwmac;
+	plat_dat->eee_usecs_rate = plat_dat->clk_ptp_rate;
+
+	if (plat_dat->eee_usecs_rate > 0) {
+		u32 tx_lpi_usec;
+
+		tx_lpi_usec = (plat_dat->eee_usecs_rate / 1000000) - 1;
+		writel(tx_lpi_usec, stmmac_res.addr + GMAC_1US_TIC_COUNTER);
+	}
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret) {
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c +9 -0
index ab0a81e0fea1..2af9458be95f 100644
@@ -6,6 +6,7 @@
 #include <linux/pci.h>
 #include <linux/dmi.h>
 #include "dwmac-intel.h"
+#include "dwmac4.h"
 #include "stmmac.h"
 
 struct intel_priv_data {
@@ -295,6 +296,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 	plat->axi->axi_blen[2] = 16;
 
 	plat->ptp_max_adj = plat->clk_ptp_rate;
+	plat->eee_usecs_rate = plat->clk_ptp_rate;
 
 	/* Set system clock */
 	plat->stmmac_clk = clk_register_fixed_rate(&pdev->dev,
@@ -623,6 +625,13 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
 	if (ret)
 		return ret;
 
+	if (plat->eee_usecs_rate > 0) {
+		u32 tx_lpi_usec;
+
+		tx_lpi_usec = (plat->eee_usecs_rate / 1000000) - 1;
+		writel(tx_lpi_usec, res.addr + GMAC_1US_TIC_COUNTER);
+	}
+
 	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		return ret;
include/linux/stmmac.h +1 -0
index 00e83c877496..628e28903b8b 100644
@@ -200,5 +200,6 @@ struct plat_stmmacenet_data {
 	int has_xgmac;
 	bool vlan_fail_q_en;
 	u8 vlan_fail_q;
+	unsigned int eee_usecs_rate;
 };
 #endif
Signature · 1 line
2.17.1