mfd: intel-m10-bmc: add Intel MAX 10 BMC chip support for Intel FPGA PAC
Subsystems (2)
Xu Yilun
maintainerPATCH v6 1/1 mfd: intel-m10-bmc: add Intel MAX 10 BMC chip support for Intel FPGA PAC
This patch implements the basic functions of the BMC chip for some Intel FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the Intel MAX 10 CPLD.
This BMC chip is connected to the FPGA by a SPI bus. To provide direct register access from the FPGA, the "SPI slave to Avalon Master Bridge" (spi-avmm) IP is integrated in the chip. It converts encoded streams of bytes from the host to the internal register read/write on the Avalon bus. So This driver uses the regmap-spi-avmm for register accessing.
---
v2: Split out the regmap-spi-avmm part.
Rename the file intel-m10-bmc-main.c to intel-m10-bmc.c, cause
there is only one source file left for this module now.
v3: Add the sub devices in mfd_cell.
Some minor fixes.
v4: No change.
v5: Changes the names of mfd_cell.
Use ATTRIBUTE_GROUPS() to simplify the code.
Use the generic 'ddata' for the instance of struct intel_m10bmc. More comments to clarify the function check_m10bmc_version(). Some minor fixes.
v6: Defines macro for invalid legacy bmc version value to make the
version check more clear.
Add comments for the purpose of abstraction of the regmap ops.
--- .../ABI/testing/sysfs-driver-intel-m10-bmc | 15 ++ drivers/mfd/Kconfig | 13 ++ drivers/mfd/Makefile | 2 + drivers/mfd/intel-m10-bmc.c | 164 +++++++++++++++++++++ include/linux/mfd/intel-m10-bmc.h | 65 ++++++++ 5 files changed, 259 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-intel-m10-bmc create mode 100644 drivers/mfd/intel-m10-bmc.c create mode 100644 include/linux/mfd/intel-m10-bmc.h
Documentation/ABI/testing/sysfs-driver-intel-m10-bmc new file +15 -0
@@ -0,0 +1,15 @@ +What: /sys/bus/spi/devices/.../bmc_version +Date: June 2020 +KernelVersion: 5.10 +Contact: Xu Yilun <[email protected]> +Description: Read only. Returns the hardware build version of Intel + MAX10 BMC chip. + Format: "0x%x". + +What: /sys/bus/spi/devices/.../bmcfw_version +Date: June 2020 +KernelVersion: 5.10 +Contact: Xu Yilun <[email protected]> +Description: Read only. Returns the firmware version of Intel MAX10 + BMC chip. + Format: "0x%x".
drivers/mfd/Kconfig +13 -0
@@ -2129,5 +2129,18 @@ config SGI_MFD_IOC3 If you have an SGI Origin, Octane, or a PCI IOC3 card, then say Y. Otherwise say N. +config MFD_INTEL_M10_BMC + tristate "Intel MAX 10 Board Management Controller" + depends on SPI_MASTER + select REGMAP_SPI_AVMM + select MFD_CORE + help + Support for the Intel MAX 10 board management controller using the + SPI interface. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. + endmenu endif
drivers/mfd/Makefile +2 -0
@@ -265,3 +265,5 @@ obj-$(CONFIG_MFD_STMFX) += stmfx.o obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o + +obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
drivers/mfd/intel-m10-bmc.c new file +164 -0
164 lines not on this page · raw message
include/linux/mfd/intel-m10-bmc.h new file +65 -0
65 lines not on this page · raw message
Signature · 1 line
2.7.4
Lee Jones
AppliedQuoted 30 lines · Xu Yilun
This patch implements the basic functions of the BMC chip for some Intel FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the Intel MAX 10 CPLD.
This BMC chip is connected to the FPGA by a SPI bus. To provide direct register access from the FPGA, the "SPI slave to Avalon Master Bridge" (spi-avmm) IP is integrated in the chip. It converts encoded streams of bytes from the host to the internal register read/write on the Avalon bus. So This driver uses the regmap-spi-avmm for register accessing.
Signed-off-by Xu Yilun <[email protected]>Signed-off-by Wu Hao <[email protected]>Signed-off-by Matthew Gerlach <[email protected]>Signed-off-by Russ Weight <[email protected]>Reviewed-by Tom Rix <[email protected]>---
v2: Split out the regmap-spi-avmm part.
Rename the fileintel-m10-bmc-main.ctointel-m10-bmc.c, cause
there is only one source file left for this module now.
v3: Add the sub devices inmfd_cell.
Some minor fixes.
v4: No change.
v5: Changes the names ofmfd_cell.
UseATTRIBUTE_GROUPS()to simplify the code.
Use the generic 'ddata' for the instance of structintel_m10bmc. More comments to clarify the functioncheck_m10bmc_version(). Some minor fixes.
v6: Defines macro for invalid legacy bmc version value to make the
version check more clear.
Add comments for the purpose of abstraction of the regmap ops.
Quoted 10 lines
--- .../ABI/testing/sysfs-driver-intel-m10-bmc | 15 ++ drivers/mfd/Kconfig | 13 ++ drivers/mfd/Makefile | 2 + drivers/mfd/intel-m10-bmc.c | 164 +++++++++++++++++++++ include/linux/mfd/intel-m10-bmc.h | 65 ++++++++ 5 files changed, 259 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-driver-intel-m10-bmc create mode 100644 drivers/mfd/intel-m10-bmc.c create mode 100644 include/linux/mfd/intel-m10-bmc.h
Applied, thanks.
Signature · 4 lines
Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog