power: bq25890: IBAT compensation support
Subsystems (2)
v4 cover power: bq25890: IBAT compensation support
These two patches add support for IBAT compensation feature of bq2589x chargers.
---
v4 fixed property names for the features and dropped other applied or rejected
patches
Michał Mirosław (2):
power: bq25890: document IBAT compensation DT properties
power: bq25890: support IBAT compensation
.../devicetree/bindings/power/supply/bq25890.txt | 4 ++++ drivers/power/supply/bq25890_charger.c | 15 +++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-)
Signature · 1 line
2.20.1
PATCH v4 1/2 power: bq25890: document IBAT compensation DT properties
Document new properties for IBAT compensation feature.
---
v2: initial version
v4: renamed properties applying property-suffix
--- Documentation/devicetree/bindings/power/supply/bq25890.txt | 4 ++++ 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/power/supply/bq25890.txt +4 -0
@@ -33,6 +33,10 @@ Optional properties: - ti,thermal-regulation-threshold: integer, temperature above which the charge current is lowered, to avoid overheating (in degrees Celsius). If omitted, the default setting will be used (120 degrees); +- ti,ibatcomp-micro-ohms: integer, value of a resistor in series with + the battery; +- ti,ibatcomp-clamp-microvolt: integer, maximum charging voltage adjustment due + to expected voltage drop on in-series resistor; Example:
Signature · 1 line
2.20.1
Re: [PATCH v4 1/2] power: bq25890: document IBAT compensation DT properties
Quoted 10 lines · Michał Mirosław
Document new properties for IBAT compensation feature.
Signed-off-by Michał Mirosław <[email protected]>---
v2: initial version
v4: renamed properties applying property-suffix--- Documentation/devicetree/bindings/power/supply/bq25890.txt | 4 ++++ 1 file changed, 4 insertions(+)
PATCH v4 2/2 power: bq25890: support IBAT compensation
In reply to Michał MirosławAdd configuration for compensation of IBAT measuring resistor in series with the battery.
---
v4: renamed properties applying property-suffix
--- drivers/power/supply/bq25890_charger.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/power/supply/bq25890_charger.c +13 -2
@@ -83,6 +83,8 @@ struct bq25890_init_data {u8 boostf;/* boost frequency */ u8 ilim_en;/* enable ILIM pin */ u8 treg;/* thermal regulation threshold */ +u8 rbatcomp;/* IBAT sense resistor value */ +u8 vclamp;/* IBAT compensation voltage limit */ };struct bq25890_state {
@@ -258,6 +260,8 @@ enum bq25890_table_ids {TBL_VREG ,TBL_BOOSTV ,TBL_SYSVMIN , +TBL_VBATCOMP , +TBL_RBATCOMP ,/* lookup tables */ TBL_TREG,
@@ -299,6 +303,8 @@ static const union { [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */ [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */ [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */ + [TBL_VBATCOMP] ={ .rt = {0, 224000, 32000} }, /* uV */ + [TBL_RBATCOMP] ={ .rt = {0, 140000, 20000} }, /* uOhm */ /* lookup tables */ [TBL_TREG] = { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
@@ -648,7 +654,9 @@ static int bq25890_hw_init(struct bq25890_device *bq) {F_BOOSTI, bq->init_data.boosti}, {F_BOOSTF, bq->init_data.boostf}, {F_EN_ILIM, bq->init_data.ilim_en}, - {F_TREG, bq->init_data.treg} + {F_TREG, bq->init_data.treg}, + {F_BATCMP, bq->init_data.rbatcomp}, + {F_VCLAMP, bq->init_data.vclamp}, }; ret =bq25890_chip_reset (bq);
@@ -859,11 +867,14 @@ static int bq25890_fw_read_u32_props(struct bq25890_device *bq) {"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti},/* optional properties */ - {"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg} + {"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg}, + {"ti,ibatcomp-micro-ohms", true, TBL_RBATCOMP, &init->rbatcomp}, + {"ti,ibatcomp-clamp-microvolt", true, TBL_VBATCOMP, &init->vclamp}, };/* initialize data for optional properties */ init->treg =3 ;/* 120 degrees Celsius */ + init->rbatcomp = init->vclamp =0 ;/* IBAT compensation disabled */ for (i =0 ; i <ARRAY_SIZE (props); i++) { ret = device_property_read_u32(bq->dev, props[i].name,
Signature · 1 line
2.20.1
Hi,
Quoted 2 lines · Michał Mirosław
These two patches add support for IBAT compensation feature of bq2589x chargers.
Thanks, queued.
-- Sebastian
Quoted 14 lines
v4 fixed property names for the features and dropped other applied or rejected
patchesMichał Mirosław (2):
power: bq25890: document IBAT compensation DT properties
power: bq25890: support IBAT compensation.../devicetree/bindings/power/supply/bq25890.txt | 4 ++++ drivers/power/supply/bq25890_charger.c | 15 +++++++++++++-- 2 files changed, 17 insertions(+), 2 deletions(-)Signature · 1 line
2.20.1