dt-bindings: arm: fsl: Add imx8mn ddr3l evk board
Subsystems (2)
PATCH 1/2 dt-bindings: arm: fsl: Add imx8mn ddr3l evk board
Add entry for i.MX8MN DDR3L EVK board.
--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/fsl.yaml +1 -0
@@ -417,6 +417,7 @@ properties: - description: i.MX8MN based Boards items: - enum: + - fsl,imx8mn-ddr3l-evk # i.MX8MN DDR3L EVK Board - fsl,imx8mn-ddr4-evk # i.MX8MN DDR4 EVK Board - fsl,imx8mn-evk # i.MX8MN LPDDR4 EVK Board - const: fsl,imx8mn
Signature · 1 line
2.26.2
PATCH 2/2 arm64: dts: freescale: Add imx8mn ddr3l evk board support
For i.MX8MN DDR3L EVK board, it populates with the 11x11 package with no GPU, no display module compared to 14x14 package. For the board design, it is same as LPDDR4 board except that the display related interface is removed.
--- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts | 11 +++++++++++ 2 files changed, 12 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts new file +11 -0
@@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + /* + * Copyright 2020 NXP + */ + +#include "imx8mn-evk.dts" + +/ { + model = "NXP i.MX8MNano DDR3L EVK board"; + compatible = "fsl,imx8mn-ddr3l-evk", "fsl,imx8mn"; +};
Signature · 1 line
2.26.2
Re: [PATCH 2/2] arm64: dts: freescale: Add imx8mn ddr3l evk board support
Quoted 30 lines · Jacky Bai
For i.MX8MN DDR3L EVK board, it populates with the 11x11 package with no GPU, no display module compared to 14x14 package. For the board design, it is same as LPDDR4 board except that the display related interface is removed.
Signed-off-by Jacky Bai <[email protected]>--- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts | 11 +++++++++++ 2 files changed, 12 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dtsarch/arm64/boot/dts/freescale/Makefile +1
-0@@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtbarch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts new file +0
-0
arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts line 6
Quoted 6 lines
arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts new file +6
-0@@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + /* + * Copyright 2020 NXP + */ + +#include "imx8mn-evk.dts"
This should be an include of shared DTSI. You could avoid splitting/renaming if you started with DTSI at beginning, knowing that there will be multiple boards like that, with only minor differences.
arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts line 9
Quoted 3 lines
arch/arm64/boot/dts/freescale/imx8mn-ddr3l-evk.dts new file +3
-0+ +/ { + model = "NXP i.MX8MNano DDR3L EVK board";
NXP advertises it as "i.MX 8M Nano" (with spaces).
Best regards,
Krzysztof
Quoted 7 lines · Jacky Bai
Add entry for i.MX8MN DDR3L EVK board.
Signed-off-by Jacky Bai <[email protected]>--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)
Best regards,
Krzysztof
Quoted 7 lines · Jacky Bai
Add entry for i.MX8MN DDR3L EVK board.
Signed-off-by Jacky Bai <[email protected]>--- Documentation/devicetree/bindings/arm/fsl.yaml | 1 + 1 file changed, 1 insertion(+)