net/mlx5: fix Rx queue count calculation
PATCH 1/1 net/mlx5: fix Rx queue count calculation
There are a few discrepancies in the Rx queue count calculation.
The wrong index is used to calculate the number of used descriptors in an Rx queue in case of the compressed CQE processing. The global CQ index is used while we really need an internal index in a single compressed session to get the right number of elements processed.
The total number of CQs should be used instead of the number of mbufs to find out about the maximum number of Rx descriptors. These numbers are not equal for the Multi-Packet Rx queue.
Allow the Rx queue count calculation for all possible Rx bursts since CQ handling is the same for regular, vectorized, and multi-packet Rx queues.
--- drivers/net/mlx5/mlx5_rxtx.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-)
drivers/net/mlx5/mlx5_rxtx.c +12 -15
@@ -465,19 +465,11 @@ rx_queue_count(struct mlx5_rxq_data *rxq) {struct rxq_zip *zip = &rxq->zip;volatile struct mlx5_cqe *cqe; +unsigned int cq_ci = rxq->cq_ci;const unsigned int cqe_n = (1 << rxq->cqe_n);const unsigned int cqe_cnt = cqe_n -1 ; -unsigned int cq_ci; -unsigned int used; +unsigned int used =0 ; -/* if we are processing a compressed cqe */ -if (zip->ai) { - used = zip->cqe_cnt - zip->ca; - cq_ci = zip->cq_ci; - }else { - used =0 ; - cq_ci = rxq->cq_ci; - } cqe = &(*rxq->cqes)[cq_ci & cqe_cnt];while (check_cqe (cqe, cqe_n, cq_ci) !=MLX5_CQE_STATUS_HW_OWN ) {int8_t op_own;
@@ -485,14 +477,17 @@ rx_queue_count(struct mlx5_rxq_data *rxq) op_own = cqe->op_own;if (MLX5_CQE_FORMAT (op_own) ==MLX5_COMPRESSED ) - n =rte_be_to_cpu_32 (cqe->byte_cnt); +if (unlikely (zip->ai)) + n = zip->cqe_cnt - zip->ai; +else + n =rte_be_to_cpu_32 (cqe->byte_cnt);else n =1 ; cq_ci += n; used += n; cqe = &(*rxq->cqes)[cq_ci & cqe_cnt]; } - used =RTE_MIN (used, (1U << rxq->elts_n) -1 ); + used =RTE_MIN (used, cqe_n);return used; }
@@ -515,11 +510,12 @@ mlx5_rx_descriptor_status(void *rx_queue, uint16_t offset) container_of(rxq, struct mlx5_rxq_ctrl, rxq);struct rte_eth_dev *dev =ETH_DEV (rxq_ctrl->priv); -if (dev->rx_pkt_burst != mlx5_rx_burst) { +if (dev->rx_pkt_burst ==NULL || + dev->rx_pkt_burst == removed_rx_burst) { rte_errno =ENOTSUP ;return -rte_errno; } -if (offset >= (1 << rxq->elts_n)) { +if (offset >= (1 << rxq->cqe_n)) { rte_errno =EINVAL ;return -rte_errno; }
@@ -630,7 +626,8 @@ mlx5_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)struct mlx5_priv *priv = dev->data->dev_private;struct mlx5_rxq_data *rxq; -if (dev->rx_pkt_burst != mlx5_rx_burst) { +if (dev->rx_pkt_burst ==NULL || + dev->rx_pkt_burst == removed_rx_burst) { rte_errno =ENOTSUP ;return -rte_errno; }
Signature · 1 line
2.24.1
Hi,
Quoted 105 lines
-----Original Message-----
From: Alexander Kozyrev <[email protected]>
Sent: Tuesday, September 29, 2020 9:36 PM
To: [email protected]
Cc: [email protected]; Raslan Darawsheh <[email protected]>; Slava Ovsiienko <[email protected]>
Subject: [PATCH] net/mlx5: fix Rx queue count calculationThere are a few discrepancies in the Rx queue count calculation.
The wrong index is used to calculate the number of used descriptors in an Rx queue in case of the compressed CQE processing. The global CQ index is used while we really need an internal index in a single compressed session to get the right number of elements processed.
The total number of CQs should be used instead of the number of mbufs to find out about the maximum number of Rx descriptors. These numbers are not equal for the Multi-Packet Rx queue.
Allow the Rx queue count calculation for all possible Rx bursts since CQ handling is the same for regular, vectorized, and multi-packet Rx queues.
Fixes 26f0488344 ("net/mlx5: support Rx queue count API")Signed-off-by Alexander Kozyrev <[email protected]>--- drivers/net/mlx5/mlx5_rxtx.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-)drivers/net/mlx5/mlx5_rxtx.c +2
-10@@ -465,19 +465,11 @@ rx_queue_count(struct mlx5_rxq_data *rxq) {struct rxq_zip *zip = &rxq->zip;volatile struct mlx5_cqe *cqe; +unsigned int cq_ci = rxq->cq_ci;const unsigned int cqe_n = (1 << rxq->cqe_n);const unsigned int cqe_cnt = cqe_n -1 ; -unsigned int cq_ci; -unsigned int used; +unsigned int used =0 ; -/* if we are processing a compressed cqe */ -if (zip->ai) { - used = zip->cqe_cnt - zip->ca; - cq_ci = zip->cq_ci; - }else { - used =0 ; - cq_ci = rxq->cq_ci; - } cqe = &(*rxq->cqes)[cq_ci & cqe_cnt];while (check_cqe (cqe, cqe_n, cq_ci) !=MLX5_CQE_STATUS_HW_OWN ) {drivers/net/mlx5/mlx5_rxtx.c +8
-4int8_t op_own;@@ -485,14 +477,17 @@ rx_queue_count(struct mlx5_rxq_data *rxq) op_own = cqe->op_own;if (MLX5_CQE_FORMAT (op_own) ==MLX5_COMPRESSED ) - n =rte_be_to_cpu_32 (cqe->byte_cnt); +if (unlikely (zip->ai)) + n = zip->cqe_cnt - zip->ai; +else + n =rte_be_to_cpu_32 (cqe->byte_cnt);else n =1 ; cq_ci += n; used += n; cqe = &(*rxq->cqes)[cq_ci & cqe_cnt]; } - used =RTE_MIN (used, (1U << rxq->elts_n) -1 ); + used =RTE_MIN (used, cqe_n);return used; }@@ -515,11 +510,12 @@ mlx5_rx_descriptor_status(void *rx_queue, uint16_t offset)container_of (rxq ,struct mlx5_rxq_ctrl ,rxq );struct rte_eth_dev *dev =ETH_DEV (rxq_ctrl->priv); -if (dev->rx_pkt_burst != mlx5_rx_burst) { +if (dev->rx_pkt_burst ==NULL || + dev->rx_pkt_burst == removed_rx_burst) { rte_errno =ENOTSUP ;return -rte_errno; } -if (offset >= (1 << rxq->elts_n)) { +if (offset >= (1 << rxq->cqe_n)) { rte_errno =EINVAL ;return -rte_errno;drivers/net/mlx5/mlx5_rxtx.c +2
-1}@@ -630,7 +626,8 @@ mlx5_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)struct mlx5_priv *priv = dev->data->dev_private;struct mlx5_rxq_data *rxq; -if (dev->rx_pkt_burst != mlx5_rx_burst) { +if (dev->rx_pkt_burst ==NULL || + dev->rx_pkt_burst == removed_rx_burst) { rte_errno =ENOTSUP ;return -rte_errno;
Quoted 3 lines
}
--
2.24.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh