Skip to contentSkip to conversation

PCI/PM: Fix D2 transition delay

PATCH In review Bjorn Helgaas 2 participants 5 messages Sep 29, 2020 – Sep 30, 2020 PCI

lore
Share & tools
lore
#0 lore raw

cover PCI/PM: Fix D2 transition delay

From: Bjorn Helgaas <[email protected]>

Remove an unused #define.

Fix the D2 transition delay. I changed this a year ago to conform to the PCIe r5.0 spec, but I think the number I relied on is a typo in the spec. I asked the PCI-SIG to fix the typo. Hopefully I'll get a response before the merge window.

Bjorn Helgaas (2):
PCI/PM: Remove unused PCI_PM_BUS_WAIT
PCI/PM: Revert "PCI/PM: Apply D2 delay as milliseconds, not
microseconds"

 drivers/pci/pci.c | 2 +-
 drivers/pci/pci.h | 7 +++----
 2 files changed, 4 insertions(+), 5 deletions(-)
Signature · 1 line
2.25.1
#1 lore raw

PATCH 1/2 PCI/PM: Remove unused PCI_PM_BUS_WAIT

From: Bjorn Helgaas <[email protected]>

476e7faefc43 ("PCI PM: Do not wait for buses in B2 or B3 during resume") removed the last use of PCI_PM_BUS_WAIT. Remove the definition as well.

---
 drivers/pci/pci.h | 1 -
 1 file changed, 1 deletion(-)
drivers/pci/pci.h +0 -1
index 8d492669ecfd..f0a9cbe01bc7 100644
@@ -46,7 +46,6 @@ int pci_bus_error_reset(struct pci_dev *dev);
 #define PCI_PM_D2_DELAY         200
 #define PCI_PM_D3HOT_WAIT       10
 #define PCI_PM_D3COLD_WAIT      100
-#define PCI_PM_BUS_WAIT         50
 
 /**
  * struct pci_platform_pm_ops - Firmware PM callbacks
Signature · 1 line
2.25.1
#2 lore raw

PATCH 2/2 PCI/PM: Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"

In reply to Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

This reverts commit 7e24bc347e57992d532bc2ed700209b0fc0a4bf5.

7e24bc347e57 was based on PCIe r5.0, sec 5.9, which claims we need a 200 ms delay when transitioning to or from D2. However, sec 5.3.1.3 states the delay as 200 μs (microseconds), as does the table in PCIe r4.0, sec 5.9.1.

This looks like a typo in the r5.0 spec, so revert back to a 200 μs delay instead of a 200 ms delay.

Fixes 7e24bc347e57 ("PCI/PM: Apply D2 delay as milliseconds, not microseconds")
---
 drivers/pci/pci.c | 2 +-
 drivers/pci/pci.h | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)
drivers/pci/pci.c +1 -1
index c4a26532a447..d69578ad44a0 100644
@@ -1065,7 +1065,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 	if (state == PCI_D3hot || dev->current_state == PCI_D3hot)
 		pci_dev_d3_sleep(dev);
 	else if (state == PCI_D2 || dev->current_state == PCI_D2)
-		msleep(PCI_PM_D2_DELAY);
+		udelay(PCI_PM_D2_DELAY);
 
 	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
 	dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
drivers/pci/pci.h +3 -3
index f0a9cbe01bc7..f86cae9aa1f4 100644
@@ -43,9 +43,9 @@ int pci_probe_reset_function(struct pci_dev *dev);
 int pci_bridge_secondary_bus_reset(struct pci_dev *dev);
 int pci_bus_error_reset(struct pci_dev *dev);
 
-#define PCI_PM_D2_DELAY         200
-#define PCI_PM_D3HOT_WAIT       10
-#define PCI_PM_D3COLD_WAIT      100
+#define PCI_PM_D2_DELAY         200	/* usec; see PCIe r4.0, sec 5.9.1 */
+#define PCI_PM_D3HOT_WAIT       10	/* msec */
+#define PCI_PM_D3COLD_WAIT      100	/* msec */
 
 /**
  * struct pci_platform_pm_ops - Firmware PM callbacks
Signature · 1 line
2.25.1
Reviewed-by on the v1 series
#3 lore raw
In reply to Bjorn Helgaas
Quoted 9 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Remove an unused #define.

Fix the D2 transition delay. I changed this a year ago to conform to the PCIe r5.0 spec, but I think the number I relied on is a typo in the spec. I asked the PCI-SIG to fix the typo. Hopefully I'll get a response before the merge window.

Quoted 9 lines

Bjorn Helgaas (2):
PCI/PM: Remove unused PCI_PM_BUS_WAIT
PCI/PM: Revert "PCI/PM: Apply D2 delay as milliseconds, not
microseconds"

  drivers/pci/pci.c | 2 +-
  drivers/pci/pci.h | 7 +++----
  2 files changed, 4 insertions(+), 5 deletions(-)

Please add

to both patches.

Cheers!

#4 lore raw
In reply to Bjorn Helgaas
Quoted 9 lines · Bjorn Helgaas

From: Bjorn Helgaas <[email protected]>

Remove an unused #define.

Fix the D2 transition delay. I changed this a year ago to conform to the PCIe r5.0 spec, but I think the number I relied on is a typo in the spec. I asked the PCI-SIG to fix the typo. Hopefully I'll get a response before the merge window.

Quoted 8 lines

Bjorn Helgaas (2):
PCI/PM: Remove unused PCI_PM_BUS_WAIT
PCI/PM: Revert "PCI/PM: Apply D2 delay as milliseconds, not
microseconds"

 drivers/pci/pci.c | 2 +-
 drivers/pci/pci.h | 7 +++----
 2 files changed, 4 insertions(+), 5 deletions(-)

Applied with Rafael's reviewed-by to pci/pm for v5.10. Subject to revision based on feedback from the PCI-SIG, of course.