tests/acceptance: Add a 'virt_kvm' test using the GICv3
PATCH 1/1 tests/acceptance: Add a 'virt_kvm' test using the GICv3
The current 'virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.
Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)
The job.log content is:
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)
--- tests/acceptance/boot_linux.py | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
tests/acceptance/boot_linux.py +16 -1
@@ -182,10 +182,11 @@ def test_virt_tcg(self): self.add_common_args() self.launch_and_wait() - def test_virt_kvm(self): + def test_virt_kvm_gicv2(self): """ :avocado: tags=accel:kvm :avocado: tags=cpu:host + :avocado: tags=device:gicv2 """ if not kvm_available(self.arch, self.qemu_bin): self.cancel(KVM_NOT_AVAILABLE)
@@ -195,6 +196,20 @@ def test_virt_kvm(self): self.add_common_args() self.launch_and_wait() + def test_virt_kvm_gicv3(self): + """ + :avocado: tags=accel:kvm + :avocado: tags=cpu:host + :avocado: tags=device:gicv3 + """ + if not kvm_available(self.arch, self.qemu_bin): + self.cancel(KVM_NOT_AVAILABLE) + self.vm.add_args("-accel", "kvm") + self.vm.add_args("-cpu", "host") + self.vm.add_args("-machine", "virt,gic-version=3") + self.add_common_args() + self.launch_and_wait() + class BootLinuxPPC64(BootLinux): """
Signature · 1 line
2.26.2
Quoted 4 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.
Fair enough! :)
Quoted 60 lines
Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- tests/acceptance/boot_linux.py | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)tests/acceptance/boot_linux.py +16
-2@@ -182,10 +182,11 @@ def test_virt_tcg(self): self.add_common_args() self.launch_and_wait() - def test_virt_kvm(self): + def test_virt_kvm_gicv2(self): """ :avocado: tags=accel:kvm :avocado: tags=cpu:host + :avocado: tags=device:gicv2 """ if not kvm_available(self.arch, self.qemu_bin): self.cancel(KVM_NOT_AVAILABLE)@@ -195,6 +196,20 @@ def test_virt_kvm(self): self.add_common_args() self.launch_and_wait() + def test_virt_kvm_gicv3(self): + """ + :avocado: tags=accel:kvm + :avocado: tags=cpu:host + :avocado: tags=device:gicv3 + """ + if not kvm_available(self.arch, self.qemu_bin): + self.cancel(KVM_NOT_AVAILABLE) + self.vm.add_args("-accel", "kvm") + self.vm.add_args("-cpu", "host") + self.vm.add_args("-machine", "virt,gic-version=3") + self.add_common_args() + self.launch_and_wait() + class BootLinuxPPC64(BootLinux): """ --
Quoted 2 lines
2.26.2
Quoted 16 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
Quoted 7 lines
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- tests/acceptance/boot_linux.py | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
Thanks, applied to my acceptance-testing tree.
Quoted 12 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
Quoted 8 lines
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)
On the new aarch64 machine which is GICv3 I get the following:
(006/142) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.47 s)
which it shouldn't have run. However:
./tests/venv/bin/avocado --show=app run -t device:gic3 tests/acceptance/
Test Suite could not be create. No test references provided nor any other arguments resolved into tests
Is this something that has regressed or am I doing it wrong?
Quoted 44 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- tests/acceptance/boot_linux.py | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)tests/acceptance/boot_linux.py +16
-1@@ -182,10 +182,11 @@ def test_virt_tcg(self): self.add_common_args() self.launch_and_wait() - def test_virt_kvm(self): + def test_virt_kvm_gicv2(self): """ :avocado: tags=accel:kvm :avocado: tags=cpu:host + :avocado: tags=device:gicv2 """ if not kvm_available(self.arch, self.qemu_bin): self.cancel(KVM_NOT_AVAILABLE)@@ -195,6 +196,20 @@ def test_virt_kvm(self): self.add_common_args() self.launch_and_wait() + def test_virt_kvm_gicv3(self): + """ + :avocado: tags=accel:kvm + :avocado: tags=cpu:host + :avocado: tags=device:gicv3 + """ + if not kvm_available(self.arch, self.qemu_bin): + self.cancel(KVM_NOT_AVAILABLE) + self.vm.add_args("-accel", "kvm") + self.vm.add_args("-cpu", "host") + self.vm.add_args("-machine", "virt,gic-version=3") + self.add_common_args() + self.launch_and_wait() + class BootLinuxPPC64(BootLinux): """
Signature · 1 line
Alex Bennée
Quoted 26 lines · Alex Bennée
Quoted 12 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
Quoted 8 lines
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)On the new aarch64 machine which is GICv3 I get the following:
Quoted 8 lines
(006/142) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.47 s)
which it shouldn't have run. However:
./tests/venv/bin/avocado --show=app run -t device:gic3 tests/acceptance/
Test Suite could not be create. No test references provided nor any other arguments resolved into testsIs this something that has regressed or am I doing it wrong?
Typo in the tag: "device:gic3" -> "device:gicv3"
Quoted 46 lines
Quoted 44 lines
Signed-off-by Philippe Mathieu-Daudé <[email protected]>--- tests/acceptance/boot_linux.py | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)tests/acceptance/boot_linux.py +16
-1@@ -182,10 +182,11 @@ def test_virt_tcg(self): self.add_common_args() self.launch_and_wait() - def test_virt_kvm(self): + def test_virt_kvm_gicv2(self): """ :avocado: tags=accel:kvm :avocado: tags=cpu:host + :avocado: tags=device:gicv2 """ if not kvm_available(self.arch, self.qemu_bin): self.cancel(KVM_NOT_AVAILABLE)@@ -195,6 +196,20 @@ def test_virt_kvm(self): self.add_common_args() self.launch_and_wait() + def test_virt_kvm_gicv3(self): + """ + :avocado: tags=accel:kvm + :avocado: tags=cpu:host + :avocado: tags=device:gicv3 + """ + if not kvm_available(self.arch, self.qemu_bin): + self.cancel(KVM_NOT_AVAILABLE) + self.vm.add_args("-accel", "kvm") + self.vm.add_args("-cpu", "host") + self.vm.add_args("-machine", "virt,gic-version=3") + self.add_common_args() + self.launch_and_wait() + class BootLinuxPPC64(BootLinux): """
Quoted 29 lines · Philippe Mathieu-Daudé
Quoted 28 lines · Alex Bennée
Quoted 12 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
Quoted 8 lines
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)On the new aarch64 machine which is GICv3 I get the following:
(006/142) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.47 s)
Quoted 8 lines
Quoted 6 lines
which it shouldn't have run. However:
./tests/venv/bin/avocado --show=app run -t device:gic3 tests/acceptance/
Test Suite could not be create. No test references provided nor any other arguments resolved into testsIs this something that has regressed or am I doing it wrong?
Typo in the tag: "device:gic3" -> "device:gicv3"
Doh!
But what about:
/tests/venv/bin/avocado run tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2
JOB ID : 396696d8f9d31d970878cb46025b2ced76f3623f
JOB LOG : /home/alex/avocado/job-results/job-2021-04-06T17.11-396696d/job.log
(1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.65 s)
RESULTS : PASS 0 | ERROR 1 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 0.96 s
why doesn't that skip?
Signature · 1 line
Alex Bennée
Quoted 45 lines · Alex Bennée
Quoted 29 lines · Philippe Mathieu-Daudé
Quoted 28 lines · Alex Bennée
Quoted 12 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
Quoted 8 lines
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)On the new aarch64 machine which is GICv3 I get the following:
(006/142) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.47 s)
Quoted 8 lines
Quoted 6 lines
which it shouldn't have run. However:
./tests/venv/bin/avocado --show=app run -t device:gic3 tests/acceptance/
Test Suite could not be create. No test references provided nor any other arguments resolved into testsIs this something that has regressed or am I doing it wrong?
Typo in the tag: "device:gic3" -> "device:gicv3"
Doh!
But what about:
Quoted 8 lines
/tests/venv/bin/avocado run tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2
JOB ID :396696d8f9d31d970878cb46025b2ced76f3623f
JOB LOG :/home/alex/avocado/job-results/job-2021-04-06T17.11-396696d/job.log
(1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.65 s)
RESULTS : PASS 0 | ERROR 1 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 0.96 swhy doesn't that skip?
/home/phil/avocado/job-results/job-2021-04-12T17.51-efdca81/job.log
2021-04-12 17:52:44,589 machine L0389 DEBUG| Output:
"qemu-system-aarch64: Could not find ROM image '/home/phil/qemu/build/host/pc-bios/edk2-aarch64-code.fd'\n"
Missing prerequisite:
$ ninja pc-bios/edk2-aarch64-code.fd [1/1] Generating edk2-aarch64-code.fd with a custom command (wrapped by meson to capture output)
Then we are good:
$ avocado --show=app,console run -t device:gicv3 tests/acceptance JOB ID : e84401e5cc3ae53a3094c79491e661385cc7b4a7 JOB LOG : /home/phil/avocado/job-results/job-2021-04-12T17.53-e84401e/job.log (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (16.38 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 16.70 s
Probably some missing dependency in Makefile/Meson?
Hi Alex,
Quoted 79 lines · Philippe Mathieu-Daudé
Quoted 45 lines · Alex Bennée
Quoted 29 lines · Philippe Mathieu-Daudé
Quoted 28 lines · Alex Bennée
Quoted 12 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
Quoted 8 lines
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)On the new aarch64 machine which is GICv3 I get the following:
(006/142) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.47 s)
Quoted 8 lines
Quoted 6 lines
which it shouldn't have run. However:
./tests/venv/bin/avocado --show=app run -t device:gic3 tests/acceptance/
Test Suite could not be create. No test references provided nor any other arguments resolved into testsIs this something that has regressed or am I doing it wrong?
Typo in the tag: "device:gic3" -> "device:gicv3"
Doh!
But what about:
Quoted 8 lines
/tests/venv/bin/avocado run tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2
JOB ID :396696d8f9d31d970878cb46025b2ced76f3623f
JOB LOG :/home/alex/avocado/job-results/job-2021-04-06T17.11-396696d/job.log
(1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.65 s)
RESULTS : PASS 0 | ERROR 1 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 0.96 swhy doesn't that skip?
/home/phil/avocado/job-results/job-2021-04-12T17.51-efdca81/job.log2021-04-12 17:52:44,589 machine L0389 DEBUG| Output:"qemu-system-aarch64: Could not find ROM image '/home/phil/qemu/build/host/pc-bios/edk2-aarch64-code.fd'\n"
Missing prerequisite:
$ ninja pc-bios/edk2-aarch64-code.fd [1/1] Generating edk2-aarch64-code.fd with a custom command (wrapped by meson to capture output)Then we are good:
$ avocado --show=app,console run -t device:gicv3 tests/acceptance JOB ID : e84401e5cc3ae53a3094c79491e661385cc7b4a7 JOB LOG : /home/phil/avocado/job-results/job-2021-04-12T17.53-e84401e/job.log (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (16.38 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 16.70 s
Quoted 1 line
Probably some missing dependency in Makefile/Meson?
Are you using multiple build directories?
I could reproduce doing:
$ mkdir A B $ cd A $ make check-qtest-aarch64 $ avocado --show=app,console run -t device:gicv3 tests/acceptance $ cd ../B $ ninja qemu-system-aarch64 $ avocado --show=app,console run -t device:gicv3 tests/acceptance
In A edk2-aarch64-code.fd has been expanded in A/pc-bios/, in B it isn't.
check-acceptance is a Makefile rule, not a ninja one... I suppose we need to convert it to ninja to be able to use the rest of the dependencies checks.
Cc'ing Paolo because I'm not sure what the best move and where to plug things.
Quoted 82 lines · Philippe Mathieu-Daudé
Hi Alex,
Quoted 79 lines · Philippe Mathieu-Daudé
Quoted 45 lines · Alex Bennée
Quoted 29 lines · Philippe Mathieu-Daudé
Quoted 28 lines · Alex Bennée
Quoted 12 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
Quoted 8 lines
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)On the new aarch64 machine which is GICv3 I get the following:
(006/142) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.47 s)
Quoted 8 lines
Quoted 6 lines
which it shouldn't have run. However:
./tests/venv/bin/avocado --show=app run -t device:gic3 tests/acceptance/
Test Suite could not be create. No test references provided nor any other arguments resolved into testsIs this something that has regressed or am I doing it wrong?
Typo in the tag: "device:gic3" -> "device:gicv3"
Doh!
But what about:
Quoted 8 lines
/tests/venv/bin/avocado run tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2
JOB ID :396696d8f9d31d970878cb46025b2ced76f3623f
JOB LOG :/home/alex/avocado/job-results/job-2021-04-06T17.11-396696d/job.log
(1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.65 s)
RESULTS : PASS 0 | ERROR 1 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 0.96 swhy doesn't that skip?
/home/phil/avocado/job-results/job-2021-04-12T17.51-efdca81/job.log2021-04-12 17:52:44,589 machine L0389 DEBUG| Output:"qemu-system-aarch64: Could not find ROM image '/home/phil/qemu/build/host/pc-bios/edk2-aarch64-code.fd'\n"
Missing prerequisite:
$ ninja pc-bios/edk2-aarch64-code.fd [1/1] Generating edk2-aarch64-code.fd with a custom command (wrapped by meson to capture output)Then we are good:
$ avocado --show=app,console run -t device:gicv3 tests/acceptance JOB ID : e84401e5cc3ae53a3094c79491e661385cc7b4a7 JOB LOG : /home/phil/avocado/job-results/job-2021-04-12T17.53-e84401e/job.log (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (16.38 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 16.70 s
Quoted 3 lines
Quoted 1 line
Probably some missing dependency in Makefile/Meson?
Are you using multiple build directories?
Yes - many.
Quoted 19 lines
I could reproduce doing:
$ mkdir A B $ cd A $ make check-qtest-aarch64 $ avocado --show=app,console run -t device:gicv3 tests/acceptance $ cd ../B $ ninja qemu-system-aarch64 $ avocado --show=app,console run -t device:gicv3 tests/acceptanceIn A edk2-aarch64-code.fd has been expanded in A/pc-bios/, in B it isn't.
check-acceptance is a
Makefilerule, not a ninja one... I suppose we need to convert it to ninja to be able to use the rest of the dependencies checks.Cc'ing Paolo because I'm not sure what the best move and where to plug things.
Signature · 1 line
Alex Bennée
Quoted 99 lines · Philippe Mathieu-Daudé
Hi Alex,
Quoted 79 lines · Philippe Mathieu-Daudé
Quoted 45 lines · Alex Bennée
Quoted 29 lines · Philippe Mathieu-Daudé
Quoted 28 lines · Alex Bennée
Quoted 12 lines · Philippe Mathieu-Daudé
The current '
virt_kvm' test is restricted to GICv2, but can also work with a GICv3. Duplicate it but add a GICv3 test which can be tested on some hardware.Noticed while running:
$ avocado --show=app run -t machine:virt tests/acceptance/ ... (2/6) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm: ERROR: Unexpected empty reply from server (1.82 s)The job.log content is:
Quoted 8 lines
L0351 DEBUG| Output: 'qemu-system-aarch64: host does not support in-kernel GICv2 emulation\n'
With this patch:
$ avocado --show=app run -t device:gicv3 tests/acceptance/ (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (55.10 s)On the new aarch64 machine which is GICv3 I get the following:
(006/142) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.47 s)
Quoted 8 lines
Quoted 6 lines
which it shouldn't have run. However:
./tests/venv/bin/avocado --show=app run -t device:gic3 tests/acceptance/
Test Suite could not be create. No test references provided nor any other arguments resolved into testsIs this something that has regressed or am I doing it wrong?
Typo in the tag: "device:gic3" -> "device:gicv3"
Doh!
But what about:
Quoted 8 lines
/tests/venv/bin/avocado run tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2
JOB ID :396696d8f9d31d970878cb46025b2ced76f3623f
JOB LOG :/home/alex/avocado/job-results/job-2021-04-06T17.11-396696d/job.log
(1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv2: ERROR: Unexpected empty reply from server (0.65 s)
RESULTS : PASS 0 | ERROR 1 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME : 0.96 swhy doesn't that skip?
/home/phil/avocado/job-results/job-2021-04-12T17.51-efdca81/job.log2021-04-12 17:52:44,589 machine L0389 DEBUG| Output:"qemu-system-aarch64: Could not find ROM image '/home/phil/qemu/build/host/pc-bios/edk2-aarch64-code.fd'\n"
Missing prerequisite:
$ ninja pc-bios/edk2-aarch64-code.fd [1/1] Generating edk2-aarch64-code.fd with a custom command (wrapped by meson to capture output)Then we are good:
$ avocado --show=app,console run -t device:gicv3 tests/acceptance JOB ID : e84401e5cc3ae53a3094c79491e661385cc7b4a7 JOB LOG : /home/phil/avocado/job-results/job-2021-04-12T17.53-e84401e/job.log (1/1) tests/acceptance/boot_linux.py:BootLinuxAarch64.test_virt_kvm_gicv3: PASS (16.38 s) RESULTS : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0 JOB TIME : 16.70 sQuoted 1 line
Probably some missing dependency in Makefile/Meson?
Are you using multiple build directories?
I could reproduce doing:
$ mkdir A B $ cd A $ make check-qtest-aarch64 $ avocado --show=app,console run -t device:gicv3 tests/acceptance $ cd ../B $ ninja qemu-system-aarch64 $ avocado --show=app,console run -t device:gicv3 tests/acceptanceIn A edk2-aarch64-code.fd has been expanded in A/pc-bios/, in B it isn't.
Quoted 8 lines
check-acceptance is a
Makefilerule, not a ninja one... I suppose we need to convert it to ninja to be able to use the rest of the dependencies checks.Cc'ing Paolo because I'm not sure what the best move and where to plug things.
While a proper build system conversion fix doesn't happen, what about:
tests/acceptance/boot_linux.py +4 -3
@@ -69,9 +69,10 @@ class BootLinuxAarch64(LinuxTest): chksum = '1e18d9c0cf734940c4b5d5ec592facaed2af0ad0329383d5639c997fdf16fe49' def add_common_args(self): - self.vm.add_args('-bios', - os.path.join(BUILD_DIR, 'pc-bios', - 'edk2-aarch64-code.fd')) + bios_path = os.path.join(BUILD_DIR, 'pc-bios', 'edk2-aarch64-code.fd') + if not os.path.exists(bios_path): + self.cancel('Missing bios file "%s"', bios_path) + self.vm.add_args('-bios', bios_path) self.vm.add_args('-device', 'virtio-rng-pci,rng=rng0') self.vm.add_args('-object', 'rng-random,id=rng0,filename=/dev/urandom')
I can send a patch if this looks reasonable.
- Cleber.