Skip to contentSkip to conversation

staging: vchiq: Fix list_for_each exit tests

PATCH Superseded Dan Carpenter 3 participants 4 messages Sep 28, 2020 – Oct 8, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: vchiq: Fix list_for_each exit tests

This code code here used to be list_for_each() and after the loop then the "entry" pointer was non-NULL if we found the correct entry or NULL if we couldn't find it. Then we changed the code to use list_for_each_entry() and so now the "entry" pointer is always non-NULL when we exit the loop.

I have introduced a new "found" variable to say if we found the correct enty or not. I fixed one test by making it an else statement because that was more readable than testing "if (!found)".

Fixes 46e4b9ec4fa4 ("staging: vchiq_arm: use list_for_each_entry when accessing bulk_waiter_list")
---
 .../vc04_services/interface/vchiq_arm/vchiq_arm.c    | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +7 -5
index bb0cc9cb96e9..c25fc559cd36 100644
@@ -430,6 +430,7 @@ vchiq_blocking_bulk_transfer(unsigned int handle, void *data,
 	struct vchiq_service *service;
 	enum vchiq_status status;
 	struct bulk_waiter_node *waiter = NULL;
+	bool found = false;
 
 	service = find_service_by_handle(handle);
 	if (!service)
@@ -443,12 +444,13 @@ vchiq_blocking_bulk_transfer(unsigned int handle, void *data,
 	list_for_each_entry(waiter, &instance->bulk_waiter_list, list) {
 		if (waiter->pid = current->pid) {
 			list_del(&waiter->list);
+			found = true;
 			break;
 		}
 	}
 	mutex_unlock(&instance->bulk_waiter_list_mutex);
 
-	if (waiter) {
+	if (found) {
 		struct vchiq_bulk *bulk = waiter->bulk_waiter.bulk;
 
 		if (bulk) {
@@ -464,9 +466,7 @@ vchiq_blocking_bulk_transfer(unsigned int handle, void *data,
 				spin_unlock(&bulk_waiter_spinlock);
 			}
 		}
-	}
-
-	if (!waiter) {
+	} else {
 		waiter = kzalloc(sizeof(struct bulk_waiter_node), GFP_KERNEL);
 		if (!waiter) {
 			vchiq_log_error(vchiq_core_log_level,
@@ -945,6 +945,7 @@ static int vchiq_irq_queue_bulk_tx_rx(struct vchiq_instance *instance,
 {
 	struct vchiq_service *service;
 	struct bulk_waiter_node *waiter = NULL;
+	bool found = false;
 	int status = 0;
 	int ret;
 
@@ -967,11 +968,12 @@ static int vchiq_irq_queue_bulk_tx_rx(struct vchiq_instance *instance,
 				    list) {
 			if (waiter->pid = current->pid) {
 				list_del(&waiter->list);
+				found = true;
 				break;
 			}
 		}
 		mutex_unlock(&instance->bulk_waiter_list_mutex);
-		if (!waiter) {
+		if (!found) {
 			vchiq_log_error(vchiq_arm_log_level,
 				"no bulk_waiter found for pid %d",
 				current->pid);
Signature · 1 line
2.28.0
#1 lore raw
Quoted 9 lines · Dan Carpenter

This code code here used to be list_for_each() and after the loop then the "entry" pointer was non-NULL if we found the correct entry or NULL if we couldn't find it. Then we changed the code to use list_for_each_entry() and so now the "entry" pointer is always non-NULL when we exit the loop.

I have introduced a new "found" variable to say if we found the correct enty or not. I fixed one test by making it an else statement because that was more readable than testing "if (!found)".

Quoted 5 lines
Fixes 46e4b9ec4fa4 ("staging: vchiq_arm: use list_for_each_entry when accessing bulk_waiter_list")
---
 .../vc04_services/interface/vchiq_arm/vchiq_arm.c    | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

This doesn't apply against my tree, what branch did you make it against?

thanks,

greg k-h

#2 lore raw

PATCH v2 1/1 staging: vchiq: Fix list_for_each exit tests

After a list_for_each_entry() loop, the list iterator is always non-NULL so these conditions don't work. If the "waiter" is not found then this results in an out of bounds access.

I have fixed it by introducing a new "found" variable. In one case, I used an else statement for readability.

Fixes 46e4b9ec4fa4 ("staging: vchiq_arm: use list_for_each_entry when accessing bulk_waiter_list")

---
v2: rebase on latest linux-next

 .../vc04_services/interface/vchiq_arm/vchiq_arm.c    | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +7 -5
index 590415561b73..e6a9aab66f4a 100644
@@ -432,6 +432,7 @@ vchiq_blocking_bulk_transfer(unsigned int handle, void *data,
 	struct vchiq_service *service;
 	enum vchiq_status status;
 	struct bulk_waiter_node *waiter = NULL;
+	bool found = false;
 
 	service = find_service_by_handle(handle);
 	if (!service)
@@ -445,12 +446,13 @@ vchiq_blocking_bulk_transfer(unsigned int handle, void *data,
 	list_for_each_entry(waiter, &instance->bulk_waiter_list, list) {
 		if (waiter->pid = current->pid) {
 			list_del(&waiter->list);
+			found = true;
 			break;
 		}
 	}
 	mutex_unlock(&instance->bulk_waiter_list_mutex);
 
-	if (waiter) {
+	if (found) {
 		struct vchiq_bulk *bulk = waiter->bulk_waiter.bulk;
 
 		if (bulk) {
@@ -467,9 +469,7 @@ vchiq_blocking_bulk_transfer(unsigned int handle, void *data,
 				spin_unlock(&bulk_waiter_spinlock);
 			}
 		}
-	}
-
-	if (!waiter) {
+	} else {
 		waiter = kzalloc(sizeof(struct bulk_waiter_node), GFP_KERNEL);
 		if (!waiter) {
 			vchiq_log_error(vchiq_core_log_level,
@@ -952,6 +952,7 @@ static int vchiq_irq_queue_bulk_tx_rx(struct vchiq_instance *instance,
 {
 	struct vchiq_service *service;
 	struct bulk_waiter_node *waiter = NULL;
+	bool found = false;
 	void *userdata;
 	int status = 0;
 	int ret;
@@ -975,11 +976,12 @@ static int vchiq_irq_queue_bulk_tx_rx(struct vchiq_instance *instance,
 				    list) {
 			if (waiter->pid = current->pid) {
 				list_del(&waiter->list);
+				found = true;
 				break;
 			}
 		}
 		mutex_unlock(&instance->bulk_waiter_list_mutex);
-		if (!waiter) {
+		if (!found) {
 			vchiq_log_error(vchiq_arm_log_level,
 				"no bulk_waiter found for pid %d",
 				current->pid);
Signature · 1 line
2.28.0
Reviewed-by on v2 1/1
#3 lore raw
Quoted 10 lines · Dan Carpenter

After a list_for_each_entry() loop, the list iterator is always non-NULL so these conditions don't work. If the "waiter" is not found then this results in an out of bounds access.

I have fixed it by introducing a new "found" variable. In one case, I used an else statement for readability.

Fixes 46e4b9ec4fa4 ("staging: vchiq_arm: use list_for_each_entry when accessing bulk_waiter_list")

---