net: dsa: Support bridge 802.1Q while untagging
Subsystems (3)
PATCH v2 1/1 net: dsa: Support bridge 802.1Q while untagging
The intent of 412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") is to transparently untag the bridge's default_pvid when the Ethernet switch can only support egress tagged of that default_pvid towards the CPU port.
Prior to this commit, users would have to configure an 802.1Q upper on the bridge master device when the bridge is configured with vlan_filtering=0 in order to pop the VLAN tag:
ip link add name br0 type bridge vlan_filtering 0
ip link add link br0 name br0.1 type vlan id 1
After this commit we added support for managing a switch port 802.1Q upper but those are not usually added as bridge members, and if they do, they do not actually require any special management, the data path would pop the desired VLAN tag accordingly.
What we want to preserve is that use case and to manage when the user creates that 802.1Q upper for the bridge port.
While we are it, call __vlan_find_dev_deep_rcu() which makes use the VLAN group array which is faster.
As soon as we return the VLAN tagged SKB though it will be used by the following call path:
netif_receive_skb_list_internal
-> __netif_receive_skb_list_core
-> __netif_receive_skb_core
-> vlan_do_receive()which uses skb->vlan_proto, if we do not set it to the appropriate VLAN protocol, we will leave it set to what the DSA master has set (ETH_P_XDSA).
---
Changes in v2:
- removed unused list_head iter argument
net/dsa/dsa_priv.h | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)
net/dsa/dsa_priv.h +4 -7
@@ -205,7 +205,6 @@ static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)struct net_device *br = dp->bridge_dev;struct net_device *dev = skb->dev;struct net_device *upper_dev; -struct list_head *iter;u16 vid, pvid, proto;int err;
@@ -247,12 +246,10 @@ static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)* supports because vlan_filtering is 0. In that case, we should * definitely keep the tag, to make sure it keeps working. */ -netdev_for_each_upper_dev_rcu (dev, upper_dev, iter) { -if (!is_vlan_dev (upper_dev)) -continue ; - -if (vid ==vlan_dev_vlan_id (upper_dev)) -return skb; + upper_dev =__vlan_find_dev_deep_rcu (br,htons (proto), vid); +if (upper_dev) { + skb->vlan_proto =vlan_dev_vlan_proto (upper_dev); +return skb; }__vlan_hwaccel_clear_tag (skb);
Signature · 1 line
2.25.1
Quoted 26 lines · Florian Fainelli
The intent of
412a1526d067("net: dsa: untag the bridge pvid from rx skbs") is to transparently untag the bridge'sdefault_pvidwhen the Ethernet switch can only support egress tagged of thatdefault_pvidtowards the CPU port.Prior to this commit, users would have to configure an 802.1Q upper on the bridge master device when the bridge is configured with vlan_filtering=0 in order to pop the VLAN tag:
ip link add name br0 type bridge
vlan_filtering0
ip link add link br0 name br0.1 type vlan id 1After this commit we added support for managing a switch port 802.1Q upper but those are not usually added as bridge members, and if they do, they do not actually require any special management, the data path would pop the desired VLAN tag accordingly.
What we want to preserve is that use case and to manage when the user creates that 802.1Q upper for the bridge port.
While we are it, call
__vlan_find_dev_deep_rcu()which makes use the VLAN group array which is faster.As soon as we return the VLAN tagged SKB though it will be used by the following call path:
Quoted 9 lines
netif_receive_skb_list_internal
->__netif_receive_skb_list_core-> __netif_receive_skb_core -> vlan_do_receive()which uses
skb->vlan_proto, if we do not set it to the appropriate VLAN protocol, we will leave it set to what the DSA master has set (ETH_P_XDSA).
The explanation is super confusing, although I think the placement of the "skb->vlan_proto = vlan_dev_vlan_proto(upper_dev)" is correct. Here's what I think is going on. It has to do with what's upwards of the code you're changing:
/* Move VLAN tag from data to hwaccel */
if (!skb_vlan_tag_present(skb) && hdr->h_vlan_proto == htons(proto)) {
skb = skb_vlan_untag(skb);
if (!skb)
return NULL;
}So skb->vlan_proto should already be equal to the protocol of the 8021q upper, see the call path below.
this is the problem
|skb_vlan_untag() v
-> __vlan_hwaccel_put_tag(skb, skb->protocol, vlan_tci);
-> skb->vlan_proto = vlan_proto;But the problem is that skb_vlan_untag() calls __vlan_hwaccel_put_tag with the wrong vlan_proto, it calls it with the skb->protocol which is still ETH_P_XDSA because we haven't re-run eth_type_trans() yet. It looks like this function wants pretty badly to be called after eth_type_trans(), and it's getting pretty messy because of that, but we don't have any other driver-specific hook afterwards..
I don't have a lot of experience, the alternatives are either to:
- move dsa_untag_bridge_pvid() after eth_type_trans(), similar to what you did in your initial patch - maybe this is the cleanest
- make dsa_untag_bridge_pvid() call eth_type_trans() and this gets rid of the extra step you need to do in tag_brcm.c
- document this very well
Quoted 42 lines
Fixes 412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs")Signed-off-by Florian Fainelli <[email protected]>---
Changes in v2:- removed unused
list_headiter argumentnet/dsa/dsa_priv.h | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)net/dsa/dsa_priv.h +4
-7@@ -205,7 +205,6 @@ static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)struct net_device *br = dp->bridge_dev;struct net_device *dev = skb->dev;struct net_device *upper_dev; -struct list_head *iter;u16 vid, pvid, proto;int err;@@ -247,12 +246,10 @@ static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)* supports because vlan_filtering is 0. In that case, we should * definitely keep the tag, to make sure it keeps working. */ -netdev_for_each_upper_dev_rcu (dev, upper_dev, iter) { -if (!is_vlan_dev (upper_dev)) -continue ; - -if (vid ==vlan_dev_vlan_id (upper_dev)) -return skb; + upper_dev =__vlan_find_dev_deep_rcu (br,htons (proto), vid); +if (upper_dev) { + skb->vlan_proto =vlan_dev_vlan_proto (upper_dev); +return skb; }__vlan_hwaccel_clear_tag (skb);Signature · 1 line
2.25.1
Quoted 2 lines · Vladimir Oltean
The explanation is super confusing, although I think the placement of the "
skb->vlan_proto=vlan_dev_vlan_proto(upper_dev)" is correct.
No, I think it _is_ wrong, after all, I think you're repairing skb->vlan_proto only for that particular 8021q upper, but not for the rest. I think the correct approach would be to say "skb->protocol = hdr->h_vlan_proto" right before calling skb_vlan_untag().
Quoted 49 lines · Vladimir Oltean
Quoted 26 lines · Florian Fainelli
The intent of
412a1526d067("net: dsa: untag the bridge pvid from rx skbs") is to transparently untag the bridge'sdefault_pvidwhen the Ethernet switch can only support egress tagged of thatdefault_pvidtowards the CPU port.Prior to this commit, users would have to configure an 802.1Q upper on the bridge master device when the bridge is configured with vlan_filtering=0 in order to pop the VLAN tag:
ip link add name br0 type bridge
vlan_filtering0
ip link add link br0 name br0.1 type vlan id 1After this commit we added support for managing a switch port 802.1Q upper but those are not usually added as bridge members, and if they do, they do not actually require any special management, the data path would pop the desired VLAN tag accordingly.
What we want to preserve is that use case and to manage when the user creates that 802.1Q upper for the bridge port.
While we are it, call
__vlan_find_dev_deep_rcu()which makes use the VLAN group array which is faster.As soon as we return the VLAN tagged SKB though it will be used by the following call path:
Quoted 9 lines
netif_receive_skb_list_internal
->__netif_receive_skb_list_core-> __netif_receive_skb_core -> vlan_do_receive()which uses
skb->vlan_proto, if we do not set it to the appropriate VLAN protocol, we will leave it set to what the DSA master has set (ETH_P_XDSA).The explanation is super confusing, although I think the placement of the "
skb->vlan_proto=vlan_dev_vlan_proto(upper_dev)" is correct. Here's what I think is going on. It has to do with what's upwards of the code you're changing:/* Move VLAN tag from data to hwaccel */ if (!skb_vlan_tag_present(skb) && hdr->h_vlan_proto == htons(proto)) { skb = skb_vlan_untag(skb); if (!skb) return NULL; }
Quoted 8 lines
So
skb->vlan_protoshould already be equal to the protocol of the 8021q upper, see the call path below.this is the problem
|skb_vlan_untag()v-> __vlan_hwaccel_put_tag(skb, skb->protocol, vlan_tci); -> skb->vlan_proto = vlan_proto;
Ah, indeed!
Quoted 11 lines
But the problem is that
skb_vlan_untag()calls__vlan_hwaccel_put_tagwith the wrongvlan_proto, it calls it with theskb->protocolwhich is stillETH_P_XDSAbecause we haven't re-runeth_type_trans()yet. It looks like this function wants pretty badly to be called aftereth_type_trans(), and it's getting pretty messy because of that, but we don't have any other driver-specific hook afterwards..I don't have a lot of experience, the alternatives are either to:
- movedsa_untag_bridge_pvid()aftereth_type_trans(), similar to what you did in your initial patch - maybe this is the cleanest
This would be my preference and it would not be hurting the fast-path that much.
Quoted 2 lines
- make
dsa_untag_bridge_pvid()calleth_type_trans()and this gets rid of the extra step you need to do intag_brcm.c
Sure, however this requires that we remove the call to eth_type_trans() in dsa_switch_rcv() or that we push/pull by an appropriate amount, not very effective.
Quoted 1 line
- document this very well
I doubt this would survive the test of time unfortunately.
Quoted 42 lines
Quoted 42 lines
Fixes 412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs")Signed-off-by Florian Fainelli <[email protected]>---
Changes in v2:- removed unused
list_headiter argumentnet/dsa/dsa_priv.h | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-)net/dsa/dsa_priv.h +4
-7@@ -205,7 +205,6 @@ static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)struct net_device *br = dp->bridge_dev;struct net_device *dev = skb->dev;struct net_device *upper_dev; -struct list_head *iter;u16 vid, pvid, proto;int err;@@ -247,12 +246,10 @@ static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)* supports because vlan_filtering is 0. In that case, we should * definitely keep the tag, to make sure it keeps working. */ -netdev_for_each_upper_dev_rcu (dev, upper_dev, iter) { -if (!is_vlan_dev (upper_dev)) -continue ; - -if (vid ==vlan_dev_vlan_id (upper_dev)) -return skb; + upper_dev =__vlan_find_dev_deep_rcu (br,htons (proto), vid); +if (upper_dev) { + skb->vlan_proto =vlan_dev_vlan_proto (upper_dev); +return skb; }__vlan_hwaccel_clear_tag (skb);Signature · 1 line
2.25.1
Signature · 1 line
Florian
Quoted 5 lines · Florian Fainelli
Quoted 2 lines
- move
dsa_untag_bridge_pvid()aftereth_type_trans(), similar to what you did in your initial patch - maybe this is the cleanestThis would be my preference and it would not be hurting the fast-path that much.
Ok, let's do that. You can also replace the hdr->h_vlan_proto with skb->protocol in that case, and remove this:
struct vlan_ethhdr *hdr = vlan_eth_hdr(skb);
Thanks!
-Vladimir