Document 'void *'
cover Document 'void *'
Hi Michael,
As you asked, I squashed.
And added the POSIX.1-2008 note too. Thanks for that!
Cheers,
Alex
Alejandro Colomar (2):
system_data_types.7: Add 'void *'
void.3: New link to system_data_types(7)
man3/void.3 | 1 + man7/system_data_types.7 | 80 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 79 insertions(+), 2 deletions(-) create mode 100644 man3/void.3
Signature · 1 line
2.28.0
PATCH 1/2 system_data_types.7: Add 'void *'
system_data_types.7: void *: Add info about generic function parameters and return value
system_data_types.7: void *: Add info about pointer artihmetic
system_data_types.7: void *: Add Versions notes
Compatibility between function pointers and void * hasn't always been so. Document when that was added to POSIX.
--- man7/system_data_types.7 | 80 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 78 insertions(+), 2 deletions(-)
man7/system_data_types.7 +78 -2
@@ -679,7 +679,6 @@ See also the .I uintptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- lconv ------------------------/
@@ -1780,7 +1779,6 @@ See also the .I intptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- va_list ----------------------/
@@ -1814,6 +1812,84 @@ See also: .BR va_copy (3), .BR va_end (3) .RE +.\"------------------------------------- void * -----------------------/ +.TP +.I void * +.RS +According to the C language standard, +a pointer to any object type may be converted to a pointer to +.I void +and back. +POSIX further requires that any pointer, +including pointers to functions, +may be converted to a pointer to +.I void +and back. +.PP +Conversions from and to any other pointer type are done implicitly, +not requiring casts at all. +Note that this feature prevents any kind of type checking: +the programmer should be careful not to cast a +.I void * +value to a type incompatible to that of the underlying data, +because that would result in undefined behavior. +.PP +This type is useful in function parameters and return value +to allow passing values of any type. +The function will usually use some mechanism to know +of which type the underlying data passed to the function really is. +.PP +A value of this type can't be dereferenced, +as it would give a value of type +.I void +which is not possible. +Likewise, pointer arithmetic is not possible with this type. +However, in GNU C, poitner arithmetic is allowed +as an extension to the standard; +this is done by treating the size of a +.I void +or of a function as 1. +A consequence of this is that +.I sizeof +is also allowed on +.I void +and on function types, and returns 1. +.PP +The conversion specifier for +.I void * +for the +.BR printf (3) +and the +.BR scanf (3) +families of functions is +.BR p ; +resulting commonly in +.B %p +for printing +.I void * +values. +.PP +Versions: +The POSIX requirement about compatibility between +.I void * +and function pointers was added in +POSIX.1-2008 Technical Corrigendum 1 (2013). +.PP +Conforming to: +C99 and later; POSIX.1-2001 and later. +.PP +See also: +.BR malloc (3), +.BR memcmp (3), +.BR memcpy (3), +.BR memset (3) +.PP +See also the +.I intptr_t +and +.I uintptr_t +types in this page. +.RE .\"--------------------------------------------------------------------/ .SH NOTES The structures described in this manual page shall contain,
Signature · 1 line
2.28.0
Re: [PATCH 1/2] system_data_types.7: Add 'void *'
Quoted 66 lines · Alejandro Colomar
Signed-off-by Alejandro Colomar <[email protected]>system_data_types.7: void *: Add info about generic function parameters and return value
Reported-by Paul Eggert <[email protected]>Reported-by David Laight <[email protected]>Signed-off-by Alejandro Colomar <[email protected]>system_data_types.7: void *: Add info about pointer artihmetic
Reported-by Paul Eggert <[email protected]>Reported-by David Laight <[email protected]>Signed-off-by Alejandro Colomar <[email protected]>system_data_types.7: void *: Add Versions notes
Compatibility between function pointers and void * hasn't always been so. Document when that was added to POSIX.
Reported-by Michael Kerrisk <[email protected]>Signed-off-by Alejandro Colomar <[email protected]>--- man7/system_data_types.7 | 80 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 78 insertions(+), 2 deletions(-)man7/system_data_types.7 +16
-2@@ -679,7 +679,6 @@ See also the .I uintptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- lconv ------------------------/@@ -1780,7 +1779,6 @@ See also the .I intptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- va_list ----------------------/@@ -1814,6 +1812,84 @@ See also: .BR va_copy (3), .BR va_end (3) .RE +.\"------------------------------------- void * -----------------------/ +.TP +.I void * +.RS +According to the C language standard, +a pointer to any object type may be converted to a pointer to +.I void +and back. +POSIX further requires that any pointer, +including pointers to functions, +may be converted to a pointer to +.I void +and back. +.PP +Conversions from and to any other pointer type are done implicitly, +not requiring casts at all.
man7/system_data_types.7 See also: · line 1840
Quoted 10 lines
man7/system_data_types.7 +10
-0+Note that this feature prevents any kind of type checking: +the programmer should be careful not to cast a +.I void * +value to a type incompatible to that of the underlying data, +because that would result in undefined behavior. +.PP +This type is useful in function parameters and return value +to allow passing values of any type. +The function will usually use some mechanism to know +of which type the underlying data passed to the function really is.
This sentence seems clunky.
How about "The function will typically use some mechanism to know the real type of the data being passed via a pointer to void."
An example of "some mechanism" might be useful, though I don't have one to offer.
man7/system_data_types.7 See also: · line 1847
Quoted 7 lines
man7/system_data_types.7 +7
-0+.PP +A value of this type can't be dereferenced, +as it would give a value of type +.I void +which is not possible. +Likewise, pointer arithmetic is not possible with this type. +However, in GNU C, poitner arithmetic is allowed
Typo: pointer
Quoted 13 lines
man7/system_data_types.7 +13
-0+as an extension to the standard; +this is done by treating the size of a +.I void +or of a function as 1. +A consequence of this is that +.I sizeof +is also allowed on +.I void +and on function types, and returns 1. +.PP +The conversion specifier for +.I void * +for the
man7/system_data_types.7 See also: · line 1870
Quoted 10 lines
man7/system_data_types.7 +10
-0+.BR printf (3) +and the +.BR scanf (3) +families of functions is +.BR p ; +resulting commonly in +.B %p +for printing +.I void * +values.
What does "resulting commonly in %p for printing void * values" mean?
Is this just explaining that the format specifier p is commonly used as "%p" (but sometimes as e.g. "%20p") ?
I'm not sure the "resulting commonly ..." part adds anything of value, rather than just being confusing.
Quoted 28 lines
man7/system_data_types.7 +22
-1+.PP +Versions: +The POSIX requirement about compatibility between +.I void * +and function pointers was added in +POSIX.1-2008 Technical Corrigendum 1 (2013). +.PP +Conforming to: +C99 and later; POSIX.1-2001 and later. +.PP +See also: +.BR malloc (3), +.BR memcmp (3), +.BR memcpy (3), +.BR memset (3) +.PP +See also the +.I intptr_t +and +.I uintptr_t +types in this page. +.RE .\"--------------------------------------------------------------------/ .SH NOTES The structures described in this manual page shall contain, --2.28.0
RE: [PATCH 1/2] system_data_types.7: Add 'void *'
Quoted 27 lines
Quoted 14 lines
+.I void *
+.RSman7/system_data_types.7 +12
-0+According to the C language standard, +a pointer to any object type may be converted to a pointer to +.I void +and back. +POSIX further requires that any pointer, +including pointers to functions, +may be converted to a pointer to +.I void +and back. +.PP +Conversions from and to any other pointer type are done implicitly, +not requiring casts at all.man7/system_data_types.7 See also: · line 1840
Quoted 10 lines
man7/system_data_types.7 +10
-0+Note that this feature prevents any kind of type checking: +the programmer should be careful not to cast a +.I void * +value to a type incompatible to that of the underlying data, +because that would result in undefined behavior. +.PP +This type is useful in function parameters and return value +to allow passing values of any type. +The function will usually use some mechanism to know +of which type the underlying data passed to the function really is.This sentence seems clunky.
Quoted 5 lines
How about "The function will typically use some mechanism to know the real type of the data being passed via a pointer to void."
An example of "some mechanism" might be useful, though I don't have one to offer.
It's also bollocks.
There are two main places 'void *' is used:
1) buffers (eg functions like read() and write()) when the associated byte length is also passed.
This (sort of) includes memory allocation functions.
2) Passing a parameter for a callback function. In this case the pointer is always cast back to the original type before being used.
What it shouldn't be used for is structures you don't want other code to look inside - use incomplete structs.
David
-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)
PATCH 2/2 void.3: New link to system_data_types(7)
In reply to Alejandro Colomar--- man3/void.3 | 1 + 1 file changed, 1 insertion(+) create mode 100644 man3/void.3
man3/void.3 new file +1 -0
@@ -0,0 +1 @@ +.so man7/system_data_types.7
Signature · 1 line
2.28.0
v4 cover Document 'void *'
In reply to Alejandro ColomarHi Michael,
I'm sorry I forgot to increase the version count.
And given there are conversations continuing in old threads, you may mix them easily. I'm a bit lost in the emails too. I'll resend the latest patch (identically) as v4
(there's no v3, but this is the 4th time or so, so let's call it v4).
Regards,
Alex
Alejandro Colomar (2):
system_data_types.7: Add 'void *'
void.3: New link to system_data_types(7)
man3/void.3 | 1 + man7/system_data_types.7 | 80 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 79 insertions(+), 2 deletions(-) create mode 100644 man3/void.3
Signature · 1 line
2.28.0
v5 cover Document 'void *'
Hi Michael,
Here I added a wfix fixing some wording issues and a few typos spotted by Paul and Jonathan in the (many) threads. As previously, it is squashed into a single commit.
Thanks again for those who reviewed the patch!
BTW, for those who don't have a local repo of the man-pages, below you can see a rendered version of the patch.
Thanks,
Alex
[[
void *
According to the C language standard, a pointer to any object type may be converted to a pointer to void and back. POSIX fur- ther requires that any pointer, including pointers to functions, may be converted to a pointer to void and back.
Conversions from and to any other pointer type are done implic- itly, not requiring casts at all. Note that this feature pre- vents any kind of type checking: the programmer should be care- ful not to convert a void * value to a type incompatible to that of the underlying data, because that would result in undefined behavior.
This type is useful in function parameters and return value to allow passing values of any type. The function will typically use some mechanism to know the real type of the data being passed via a pointer to void.
A value of this type can't be dereferenced, as it would give a value of type void, which is not possible. Likewise, pointer arithmetic is not possible with this type. However, in GNU C, pointer arithmetic is allowed as an extension to the standard; this is done by treating the size of a void or of a function as
1. A consequence of this is that sizeof is also allowed on void and on function types, and returns 1.
The conversion specifier for void * for the printf(3) and the scanf(3) families of functions is p.
Versions: The POSIX requirement about compatibility between void
* and function pointers was added in POSIX.1-2008 Technical Cor- rigendum 1 (2013).
Conforming to: C99 and later; POSIX.1-2001 and later.
See also: malloc(3), memcmp(3), memcpy(3), memset(3)
See also the intptr_t and uintptr_t types in this page.
]]
Alejandro Colomar (2):
system_data_types.7: Add 'void *'
void.3: New link to system_data_types(7)
man3/void.3 | 1 + man7/system_data_types.7 | 76 ++++++++++++++++++++++++++++++++++++++-- 2 files changed, 75 insertions(+), 2 deletions(-) create mode 100644 man3/void.3
Signature · 1 line
2.28.0
PATCH v5 1/2 system_data_types.7: Add 'void *'
In reply to Alejandro Colomarsystem_data_types.7: void *: Add info about generic function parameters and return value
system_data_types.7: void *: Add info about pointer artihmetic
system_data_types.7: void *: Add Versions notes
Compatibility between function pointers and void * hasn't always been so. Document when that was added to POSIX.
system_data_types.7: void *: wfix
--- man7/system_data_types.7 | 76 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 74 insertions(+), 2 deletions(-)
man7/system_data_types.7 +74 -2
@@ -679,7 +679,6 @@ See also the .I uintptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- lconv ------------------------/
@@ -1780,7 +1779,6 @@ See also the .I intptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- va_list ----------------------/
@@ -1814,6 +1812,80 @@ See also: .BR va_copy (3), .BR va_end (3) .RE +.\"------------------------------------- void * -----------------------/ +.TP +.I void * +.RS +According to the C language standard, +a pointer to any object type may be converted to a pointer to +.I void +and back. +POSIX further requires that any pointer, +including pointers to functions, +may be converted to a pointer to +.I void +and back. +.PP +Conversions from and to any other pointer type are done implicitly, +not requiring casts at all. +Note that this feature prevents any kind of type checking: +the programmer should be careful not to convert a +.I void * +value to a type incompatible to that of the underlying data, +because that would result in undefined behavior. +.PP +This type is useful in function parameters and return value +to allow passing values of any type. +The function will typically use some mechanism to know +the real type of the data being passed via a pointer to +.IR void . +.PP +A value of this type can't be dereferenced, +as it would give a value of type +.IR void , +which is not possible. +Likewise, pointer arithmetic is not possible with this type. +However, in GNU C, pointer arithmetic is allowed +as an extension to the standard; +this is done by treating the size of a +.I void +or of a function as 1. +A consequence of this is that +.I sizeof +is also allowed on +.I void +and on function types, and returns 1. +.PP +The conversion specifier for +.I void * +for the +.BR printf (3) +and the +.BR scanf (3) +families of functions is +.BR p . +.PP +Versions: +The POSIX requirement about compatibility between +.I void * +and function pointers was added in +POSIX.1-2008 Technical Corrigendum 1 (2013). +.PP +Conforming to: +C99 and later; POSIX.1-2001 and later. +.PP +See also: +.BR malloc (3), +.BR memcmp (3), +.BR memcpy (3), +.BR memset (3) +.PP +See also the +.I intptr_t +and +.I uintptr_t +types in this page. +.RE .\"--------------------------------------------------------------------/ .SH NOTES The structures described in this manual page shall contain,
Signature · 1 line
2.28.0
Re: [PATCH v5 1/2] system_data_types.7: Add 'void *'
Hello Alex,
Quoted 1 line · Alejandro Colomar
Signed-off-by Alejandro Colomar <[email protected]>
Patch applied.
Thanks,
Michael
Quoted 131 lines
system_data_types.7: void *: Add info about generic function parameters and return value
Reported-by Paul Eggert <[email protected]>Reported-by David Laight <[email protected]>Signed-off-by Alejandro Colomar <[email protected]>system_data_types.7: void *: Add info about pointer artihmetic
Reported-by Paul Eggert <[email protected]>Reported-by David Laight <[email protected]>Signed-off-by Alejandro Colomar <[email protected]>system_data_types.7: void *: Add Versions notes
Compatibility between function pointers and void * hasn't always been so. Document when that was added to POSIX.
Reported-by Michael Kerrisk <[email protected]>Signed-off-by Alejandro Colomar <[email protected]>system_data_types.7: void *: wfix
Reported-by Jonathan Wakely <[email protected]>Reported-by Paul Eggert <[email protected]>Signed-off-by Alejandro Colomar <[email protected]>--- man7/system_data_types.7 | 76 ++++++++++++++++++++++++++++++++++++++-- 1 file changed, 74 insertions(+), 2 deletions(-)man7/system_data_types.7 +74
-2@@ -679,7 +679,6 @@ See also the .I uintptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- lconv ------------------------/@@ -1780,7 +1779,6 @@ See also the .I intptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- va_list ----------------------/@@ -1814,6 +1812,80 @@ See also: .BR va_copy (3), .BR va_end (3) .RE +.\"------------------------------------- void * -----------------------/ +.TP +.I void * +.RS +According to the C language standard, +a pointer to any object type may be converted to a pointer to +.I void +and back. +POSIX further requires that any pointer, +including pointers to functions, +may be converted to a pointer to +.I void +and back. +.PP +Conversions from and to any other pointer type are done implicitly, +not requiring casts at all. +Note that this feature prevents any kind of type checking: +the programmer should be careful not to convert a +.I void * +value to a type incompatible to that of the underlying data, +because that would result in undefined behavior. +.PP +This type is useful in function parameters and return value +to allow passing values of any type. +The function will typically use some mechanism to know +the real type of the data being passed via a pointer to +.IR void . +.PP +A value of this type can't be dereferenced, +as it would give a value of type +.IR void , +which is not possible. +Likewise, pointer arithmetic is not possible with this type. +However, in GNU C, pointer arithmetic is allowed +as an extension to the standard; +this is done by treating the size of a +.I void +or of a function as 1. +A consequence of this is that +.I sizeof +is also allowed on +.I void +and on function types, and returns 1. +.PP +The conversion specifier for +.I void * +for the +.BR printf (3) +and the +.BR scanf (3) +families of functions is +.BR p . +.PP +Versions: +The POSIX requirement about compatibility between +.I void * +and function pointers was added in +POSIX.1-2008 Technical Corrigendum 1 (2013). +.PP +Conforming to: +C99 and later; POSIX.1-2001 and later. +.PP +See also: +.BR malloc (3), +.BR memcmp (3), +.BR memcpy (3), +.BR memset (3) +.PP +See also the +.I intptr_t +and +.I uintptr_t +types in this page. +.RE .\"--------------------------------------------------------------------/ .SH NOTES The structures described in this manual page shall contain,
Signature · 3 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/
PATCH v5 2/2 void.3: New link to system_data_types(7)
In reply to Alejandro Colomar--- man3/void.3 | 1 + 1 file changed, 1 insertion(+) create mode 100644 man3/void.3
man3/void.3 new file +1 -0
@@ -0,0 +1 @@ +.so man7/system_data_types.7
Signature · 1 line
2.28.0
Re: [PATCH v5 2/2] void.3: New link to system_data_types(7)
Hello Alex,
Quoted 1 line · Alejandro Colomar
Signed-off-by Alejandro Colomar <[email protected]>
Patch applied.
And, I think we're now at a sync point.
Thanks,
Michael
Quoted 13 lines
--- man3/void.3 | 1 + 1 file changed, 1 insertion(+) create mode 100644 man3/void.3man3/void.3 new file +1
-0@@ -0,0 +1 @@ +.so man7/system_data_types.7
Signature · 3 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/
PATCH v4 1/2 system_data_types.7: Add 'void *'
In reply to Alejandro Colomarsystem_data_types.7: void *: Add info about generic function parameters and return value
system_data_types.7: void *: Add info about pointer artihmetic
system_data_types.7: void *: Add Versions notes
Compatibility between function pointers and void * hasn't always been so. Document when that was added to POSIX.
--- man7/system_data_types.7 | 80 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 78 insertions(+), 2 deletions(-)
man7/system_data_types.7 +78 -2
@@ -679,7 +679,6 @@ See also the .I uintptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- lconv ------------------------/
@@ -1780,7 +1779,6 @@ See also the .I intptr_t and .I void * -.\" TODO: Document void * types in this page. .RE .\"------------------------------------- va_list ----------------------/
@@ -1814,6 +1812,84 @@ See also: .BR va_copy (3), .BR va_end (3) .RE +.\"------------------------------------- void * -----------------------/ +.TP +.I void * +.RS +According to the C language standard, +a pointer to any object type may be converted to a pointer to +.I void +and back. +POSIX further requires that any pointer, +including pointers to functions, +may be converted to a pointer to +.I void +and back. +.PP +Conversions from and to any other pointer type are done implicitly, +not requiring casts at all. +Note that this feature prevents any kind of type checking: +the programmer should be careful not to cast a +.I void * +value to a type incompatible to that of the underlying data, +because that would result in undefined behavior. +.PP +This type is useful in function parameters and return value +to allow passing values of any type. +The function will usually use some mechanism to know +of which type the underlying data passed to the function really is. +.PP +A value of this type can't be dereferenced, +as it would give a value of type +.I void +which is not possible. +Likewise, pointer arithmetic is not possible with this type. +However, in GNU C, poitner arithmetic is allowed +as an extension to the standard; +this is done by treating the size of a +.I void +or of a function as 1. +A consequence of this is that +.I sizeof +is also allowed on +.I void +and on function types, and returns 1. +.PP +The conversion specifier for +.I void * +for the +.BR printf (3) +and the +.BR scanf (3) +families of functions is +.BR p ; +resulting commonly in +.B %p +for printing +.I void * +values. +.PP +Versions: +The POSIX requirement about compatibility between +.I void * +and function pointers was added in +POSIX.1-2008 Technical Corrigendum 1 (2013). +.PP +Conforming to: +C99 and later; POSIX.1-2001 and later. +.PP +See also: +.BR malloc (3), +.BR memcmp (3), +.BR memcpy (3), +.BR memset (3) +.PP +See also the +.I intptr_t +and +.I uintptr_t +types in this page. +.RE .\"--------------------------------------------------------------------/ .SH NOTES The structures described in this manual page shall contain,
Signature · 1 line
2.28.0
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
Quoted 1 line · Alejandro Colomar
+.I void *
GNU style is a space between "void" and "*", so this should be '.I "void\ *"', both here and elsewhere. The backslash prevents a line break.
man7/system_data_types.7 See also: · line 1832
Quoted 4 lines
man7/system_data_types.7 +4
-0+Conversions from and to any other pointer type are done implicitly, +not requiring casts at all. +Note that this feature prevents any kind of type checking: +the programmer should be careful not to cast a
Change "cast" to "convert", since the point is that no cast is needed.
Quoted 4 lines
+.PP
man7/system_data_types.7 +3
-0+The conversion specifier for +.I void * +for the
man7/system_data_types.7 See also: · line 1870
Quoted 10 lines
man7/system_data_types.7 +10
-0+.BR printf (3) +and the +.BR scanf (3) +families of functions is +.BR p ; +resulting commonly in +.B %p +for printing +.I void * +values.
%p works with any object pointer type (or in POSIX, any pointer type), not just
void *.
Should also mention "void const *", "void volatile *", etc. Plus it really should talk about plain "void", saying that it's a placeholder as a return value for functions, for casting away values, and as a keyword in C11 for functions with no parameters (though this is being changed in the next C version!). I sent comments about most of this stuff already.
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
Hi Paul,
Quoted 6 lines · Paul Eggert
Quoted 1 line · Alejandro Colomar
+.I void *
GNU style is a space between "void" and "*", so this should be '.I "void\ *"', both here and elsewhere. The backslash prevents a line break.
.I void *
renders with a space in between.
I'll show you the rendered version at the end of this email.
Quoted 7 lines
man7/system_data_types.7 See also: · line 1832
Quoted 5 lines
man7/system_data_types.7 +4
-0+Conversions from and to any other pointer type are done implicitly, +not requiring casts at all. +Note that this feature prevents any kind of type checking: +the programmer should be careful not to cast aChange "cast" to "convert", since the point is that no cast is needed.
Ok.
Quoted 10 lines
Quoted 10 lines
+.PP
man7/system_data_types.7 +8
-0+The conversion specifier for +.I void * +for the +.BR printf (3) +and the +.BR scanf (3) +families of functions is +.BR p ;
Quoted 8 lines
man7/system_data_types.7 See also: · line 1870
Quoted 5 lines
man7/system_data_types.7 +5
-0+resulting commonly in +.B %p +for printing +.I void * +values.%p works with any object pointer type (or in POSIX, any pointer type), not just void *.
In theory, no (if otherwise, I'd like to know why):
[[
p
The argument shall be a pointer to void. The value of the pointer
is converted to a sequence of printable characters, in an implementation-defined manner. ]] POSIX.1-2008
However, it's unlikely to cause any problems, I must admit.
Quoted 2 lines
Should also mention "void const *", "void volatile *", etc.
I already answered to this:
https://lore.kernel.org/linux-man/CAH6eHdQhh46TjVc72meWFTWCi7iouAod0iC1zLRga+c-36G+ig@mail.gmail.com/T/#m6f657e988558a556cb70f7c056ef7a24e73dbe4a
Quoted 5 lines
Plus it
really should talk about plain "void", saying that it's a placeholder as a return value for functions, for casting away values, and as a keyword in C11 for functions with no parameters (though this is being changed in the next C version!). I sent comments about most of this stuff already.
'void' is a completely different type from 'void *'.
This patch is for 'void *'.
If 'void' is documented,
it'll be in a different entry (although in the same page), and therefore, that'll be for a different patch.
Thanks,
Alex
__________________
void *
According to the C language standard, a pointer to any object type may be converted to a pointer to void and back. POSIX fur- ther requires that any pointer, including pointers to functions, may be converted to a pointer to void and back.
Conversions from and to any other pointer type are done implic- itly, not requiring casts at all. Note that this feature pre- vents any kind of type checking: the programmer should be care- ful not to cast a void * value to a type incompatible to that of the underlying data, because that would result in undefined be- havior.
This type is useful in function parameters and return value to allow passing values of any type. The function will usually use some mechanism to know of which type the underlying data passed to the function really is.
A value of this type can't be dereferenced, as it would give a value of type void which is not possible. Likewise, pointer arithmetic is not possible with this type. However, in GNU C, poitner arithmetic is allowed as an extension to the standard; this is done by treating the size of a void or of a function as
1. A consequence of this is that sizeof is also allowed on void and on function types, and returns 1.
The conversion specifier for void * for the printf(3) and the scanf(3) families of functions is p; resulting commonly in %p for printing void * values.
Versions: The POSIX requirement about compatibility between void
* and function pointers was added in POSIX.1-2008 Technical Cor- rigendum 1 (2013).
Conforming to: C99 and later; POSIX.1-2001 and later.
See also: malloc(3), memcmp(3), memcpy(3), memset(3)
See also the intptr_t and uintptr_t types in this page.
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
Quoted 3 lines · Alejandro Colomar
.I void *
renders with a space in between.
That's odd, as "man(7)" says "All of the arguments will be printed next to each other without intervening spaces". I'd play it safe and quote the arg anyway.
Quoted 3 lines
Quoted 2 lines
%p works with any object pointer type (or in POSIX, any pointer type), not just void *.
In theory, no (if otherwise, I'd like to know why):
Oh, you're right. I had missed that. In GNU/Linux hosts, though, any pointer (including function pointers) can be given to %p.
The only platforms where %p wouldn't work on all pointers would be platforms like IBM i, which has both 64-bit (process local) pointers and 128-bit (tagged space) pointers and where you can declare and use pointers of different widths in the same program.
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
Hi Paul,
Quoted 9 lines · Paul Eggert
Quoted 3 lines · Alejandro Colomar
.I void *
renders with a space in between.
That's odd, as "man(7)" says "All of the arguments will be printed next to each other without intervening spaces". I'd play it safe and quote the arg anyway.
Oops, that's a bug in man(7).
Don't worry about it.
Michael, you might want to have a look at it.
I'll also add Branden, who might have something to say about it.
Quoted 5 lines
Quoted 4 lines
Quoted 3 lines
%p works with any object pointer type (or in POSIX, any pointer type), not just void *.
In theory, no (if otherwise, I'd like to know why):
Quoted 7 lines
Oh, you're right. I had missed that. In GNU/Linux hosts, though, any pointer (including function pointers) can be given to %p.
The only platforms where %p wouldn't work on all pointers would be platforms like IBM i, which has both 64-bit (process local) pointers and 128-bit (tagged space) pointers and where you can declare and use pointers of different widths in the same program.
:-)
Cheers,
Alex
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
Quoted 7 lines · Alejandro Colomar
Hi Paul,
Quoted 4 lines · Paul Eggert
Quoted 2 lines · Alejandro Colomar
.I void *
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
renders with a space in between.
That's odd, as "man(7)" says "All of the arguments will be printed next to each other without intervening spaces". I'd play it safe and quote the arg anyway.
Oops, that's a bug in man(7).
Don't worry about it.
I'm not sure where that text in man(7) comes from. However, for clarity I would normally also use quotes in this case.
Quoted 3 lines
Michael, you might want to have a look at it.
I'll also add Branden, who might have something to say about it.
Yes, maybe Branden can add some insight.
Thanks,
Michael
Signature · 3 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
Quoted 14 lines · Michael Kerrisk (man-pages)
Quoted 5 lines · Alejandro Colomar
Quoted 4 lines · Paul Eggert
Quoted 2 lines · Alejandro Colomar
.I void *
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
renders with a space in between.
That's odd, as "man(7)" says "All of the arguments will be printed next to each other without intervening spaces". I'd play it safe and quote the arg anyway.
Oops, that's a bug in man(7). Don't worry about it.
Quoted 8 lines
I'm not sure where that text in man(7) comes from. However, for clarity I would normally also use quotes in this case.
Quoted 3 lines
Michael, you might want to have a look at it.
I'll also add Branden, who might have something to say about it.
Yes, maybe Branden can add some insight.
The "short" answer[1] is that I think Alex is correct; Paul's caution is unwarranted and arises from confusion with the font alternation macros of the man(7) macro package. Examples of the latter are .BI and .BR. Those set their even-numbered arguments in one font and odd-numbered arguments in another, with no space between them. That suppression of space is the reason they exist. With the "single-font" macros like .B and .I[2], if you don't want space, don't type it.
I could say more, including an annotated explanation of the groff and Version 7 Unix man(7) implementations of the I macro, if desired. :)
Regards,
Branden
[1] since as everyone knows, I struggle with brevity
[2] I (and others) discourage use of .SM and .SB because they can't be distinguished from ordinary roman and bold type, respectively, on terminals.
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
Hi Michael and Branden,
Quoted 9 lines · G. Branden Robinson
Quoted 8 lines · Michael Kerrisk (man-pages)
Quoted 7 lines · Alejandro Colomar
Quoted 6 lines · Paul Eggert
Quoted 3 lines · Alejandro Colomar
.I void *
renders with a space in between.
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
That's odd, as "man(7)" says "All of the arguments will be printed next to each other without intervening spaces". I'd play it safe and quote the arg anyway.
Oops, that's a bug in man(7). Don't worry about it.
I'm not sure where that text in man(7) comes from. However, for clarity I would normally also use quotes in this case.
Hi Michael and Branden,
Here is the offending line:
https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/man7/man.7#n172
Thanks,
Alex
Quoted 26 lines
Quoted 6 lines
Quoted 4 lines
Michael, you might want to have a look at it.
I'll also add Branden, who might have something to say about it.
Yes, maybe Branden can add some insight.
The "short" answer[1] is that I think Alex is correct; Paul's caution is unwarranted and arises from confusion with the font alternation macros of the man(7) macro package. Examples of the latter are .BI and .BR. Those set their even-numbered arguments in one font and odd-numbered arguments in another, with no space between them. That suppression of space is the reason they exist. With the "single-font" macros like .B and .I[2], if you don't want space, don't type it.
I could say more, including an annotated explanation of the groff and Version 7 Unix man(7) implementations of the I macro, if desired. :)
Regards,
Branden[1] since as everyone knows, I struggle with brevity
[2] I (and others) discourage use of .SM and .SB because they can't be distinguished from ordinary roman and bold type, respectively, on terminals.
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
On 10/3/20 9:48 AM, G. Branden Robinson wrote:
[...]
Quoted 7 lines
Quoted 7 lines
The "short" answer[1] is that I think Alex is correct; Paul's caution is unwarranted and arises from confusion with the font alternation macros of the man(7) macro package. Examples of the latter are .BI and .BR. Those set their even-numbered arguments in one font and odd-numbered arguments in another, with no space between them. That suppression of space is the reason they exist. With the "single-font" macros like .B and .I[2], if you don't want space, don't type it.
Hi Branden,
This explanation is great :)
Would you mind writing a patch with it?
Cheers,
Alex
Quoted 3 lines
Quoted 3 lines
I could say more, including an annotated explanation of the groff and Version 7 Unix man(7) implementations of the I macro, if desired. :)
:)
Quoted 9 lines
Quoted 9 lines
Regards,
Branden[1] since as everyone knows, I struggle with brevity
[2] I (and others) discourage use of .SM and .SB because they can't be distinguished from ordinary roman and bold type, respectively, on terminals.
Re: [PATCH v4 1/2] system_data_types.7: Add 'void *'
In reply to G. Branden RobinsonQuoted 32 lines · G. Branden Robinson
Quoted 14 lines · Michael Kerrisk (man-pages)
Quoted 5 lines · Alejandro Colomar
Quoted 4 lines · Paul Eggert
Quoted 2 lines · Alejandro Colomar
.I void *
Quoted 7 lines
Quoted 5 lines
Quoted 1 line
renders with a space in between.
That's odd, as "man(7)" says "All of the arguments will be printed next to each other without intervening spaces". I'd play it safe and quote the arg anyway.
Oops, that's a bug in man(7). Don't worry about it.
Quoted 8 lines
I'm not sure where that text in man(7) comes from. However, for clarity I would normally also use quotes in this case.
Quoted 3 lines
Michael, you might want to have a look at it.
I'll also add Branden, who might have something to say about it.
Yes, maybe Branden can add some insight.
The "short" answer[1] is that I think Alex is correct; Paul's caution is unwarranted and arises from confusion with the font alternation macros of the man(7) macro package. Examples of the latter are .BI and .BR. Those set their even-numbered arguments in one font and odd-numbered arguments in another, with no space between them. That suppression of space is the reason they exist. With the "single-font" macros like .B and .I[2], if you don't want space, don't type it.
Quoted 2 lines
I could say more, including an annotated explanation of the groff and Version 7 Unix man(7) implementations of the I macro, if desired. :)
So, perhaps change:
All of the arguments will be printed next to each other without intervening spaces, so that the .BR command can be used to specify a word in bold followed by a mark of punctuation in Roman.
to:
For the macros that produce alternating type faces, the arguments will be printed next to each
other without intervening spaces, so that the .BR command can be used to specify a word in bold followed by a mark of punctuation in Roman.
?
Quoted 4 lines
[1] since as everyone knows, I struggle with brevity
[2] I (and others) discourage use of .SM and .SB because they can't be distinguished from ordinary roman and bold type, respectively, on terminals.
So, do you think it's worth discouraging this in man(7)?
Thanks,
Michael
Signature · 3 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Linux/UNIX System Programming Training: http://man7.org/training/
PATCH v4 2/2 void.3: New link to system_data_types(7)
In reply to Alejandro Colomar--- man3/void.3 | 1 + 1 file changed, 1 insertion(+) create mode 100644 man3/void.3
man3/void.3 new file +1 -0
@@ -0,0 +1 @@ +.so man7/system_data_types.7
Signature · 1 line
2.28.0