Skip to contentSkip to conversation

drivers/net/wan/hdlc_fr: Reduce indentation in pvc_xmit

PATCH In review Xie He 2 participants 3 messages Oct 3, 2020

Subsystems (3)
lore
Share & tools
lore

Xie He

author
#0 lore raw

PATCH 1/1 drivers/net/wan/hdlc_fr: Reduce indentation in pvc_xmit

1. Keep the code for the normal (non-error) flow at the lowest indentation level. This reduces indentation and makes the code feels more natural to read.

2. Use "goto drop" for all error handling. This reduces duplicate code.

3. Change "dev_kfree_skb" to "kfree_skb" in error handling code. "kfree_skb" is the correct function to call when dropping an skb due to an error. "dev_kfree_skb", which is an alias of "consume_skb", is for dropping skbs normally (not due to an error).

Cc Krzysztof Halasa <[email protected]>
---
 drivers/net/wan/hdlc_fr.c | 58 ++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 28 deletions(-)
drivers/net/wan/hdlc_fr.c +30 -28
index 3a44dad87602..48aaf435da50 100644
@@ -416,38 +416,40 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct pvc_device *pvc = dev->ml_priv;
 
-	if (pvc->state.active) {
-		if (dev->type == ARPHRD_ETHER) {
-			int pad = ETH_ZLEN - skb->len;
-			if (pad > 0) { /* Pad the frame with zeros */
-				int len = skb->len;
-				if (skb_tailroom(skb) < pad)
-					if (pskb_expand_head(skb, 0, pad,
-							     GFP_ATOMIC)) {
-						dev->stats.tx_dropped++;
-						dev_kfree_skb(skb);
-						return NETDEV_TX_OK;
-					}
-				skb_put(skb, pad);
-				memset(skb->data + len, 0, pad);
-			}
-		}
-		skb->dev = dev;
-		if (!fr_hard_header(&skb, pvc->dlci)) {
-			dev->stats.tx_bytes += skb->len;
-			dev->stats.tx_packets++;
-			if (pvc->state.fecn) /* TX Congestion counter */
-				dev->stats.tx_compressed++;
-			skb->dev = pvc->frad;
-			skb->protocol = htons(ETH_P_HDLC);
-			skb_reset_network_header(skb);
-			dev_queue_xmit(skb);
-			return NETDEV_TX_OK;
+	if (!pvc->state.active)
+		goto drop;
+
+	if (dev->type == ARPHRD_ETHER) {
+		int pad = ETH_ZLEN - skb->len;
+
+		if (pad > 0) { /* Pad the frame with zeros */
+			int len = skb->len;
+
+			if (skb_tailroom(skb) < pad)
+				if (pskb_expand_head(skb, 0, pad, GFP_ATOMIC))
+					goto drop;
+			skb_put(skb, pad);
+			memset(skb->data + len, 0, pad);
 		}
 	}
 
+	skb->dev = dev;
+	if (fr_hard_header(&skb, pvc->dlci))
+		goto drop;
+
+	dev->stats.tx_bytes += skb->len;
+	dev->stats.tx_packets++;
+	if (pvc->state.fecn) /* TX Congestion counter */
+		dev->stats.tx_compressed++;
+	skb->dev = pvc->frad;
+	skb->protocol = htons(ETH_P_HDLC);
+	skb_reset_network_header(skb);
+	dev_queue_xmit(skb);
+	return NETDEV_TX_OK;
+
+drop:
 	dev->stats.tx_dropped++;
-	dev_kfree_skb(skb);
+	kfree_skb(skb);
 	return NETDEV_TX_OK;
 }
 
Signature · 1 line
2.25.1
#1 lore raw

drivers/net/wan/hdlc_fr.c static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev) · line 434

Quoted 13 lines · On Sat, 3 Oct 2020 10:35:28 -0700 Xie He <[email protected]> wrote:
drivers/net/wan/hdlc_fr.c +11 -0
+	if (dev->type == ARPHRD_ETHER) {
+		int pad = ETH_ZLEN - skb->len;
+
+		if (pad > 0) { /* Pad the frame with zeros */
+			int len = skb->len;
+
+			if (skb_tailroom(skb) < pad)
+				if (pskb_expand_head(skb, 0, pad, GFP_ATOMIC))
+					goto drop;
+			skb_put(skb, pad);
+			memset(skb->data + len, 0, pad);
 		}
 	}

This code snippet is basically an version of skb_pad(). Probably it is very old and pre-dates that. Could the code use skb_pad?

author
#2 lore raw
Quoted 4 lines · Stephen Hemminger

This code snippet is basically an version of skb_pad(). Probably it is very old and pre-dates that. Could the code use skb_pad?

Oh! Yes! I looked at the skb_pad function and I think we can use it in this code.

Since it doesn't do skb_put, I think we can first call skb_pad and then call skb_put.

Thanks for your suggestion. I'll change this patch to make use of skb_pad and re-submit.