Docs: Fixing Spelling errors in Documentation/devicetree/bindings/
Subsystems (6)
Device tree bindings Pin control Watchdog device drivers Arm/Aspeed machine support +2 more subsystems
PATCH 1/1 Docs: Fixing Spelling errors in Documentation/devicetree/bindings/
Fixing three spelling errors within Documentation/devicetree/bindings. "specfied" replaced with "specified" in all three files modified. This should hopefully reduce any confusion that a reader might have.
Signed-off-by Marlon Rac Cambasis <[email protected]>
--- Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt | 2 +- Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt | 2 +- Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +1 -1
@@ -75,7 +75,7 @@ Required Properties: The child node should contain a list of pin(s) on which a particular pin function selection or pin configuration (or both) have to applied. This list of pins is specified using the property name "samsung,pins". There - should be atleast one pin specfied for this property and there is no upper + should be atleast one pin specified for this property and there is no upper limit on the count of pins that can be specified. The pins are specified using pin names which are derived from the hardware manual of the SoC. As an example, the pins in GPA0 bank of the pin controller can be represented
Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt +1 -1
@@ -9,7 +9,7 @@ Optional property: - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. NPCM7xx contain four software reset that represent numbers 1 to 4. - If 'nuvoton,sw-reset-number' is not specfied software reset is disabled. + If 'nuvoton,sw-reset-number' is not specified software reset is disabled. Example: rstc: rstc@f0801000 {
Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt +1 -1
@@ -20,7 +20,7 @@ Optional properties: This is useful in situations where another watchdog engine on chip is to perform the reset. - If 'aspeed,reset-type=' is not specfied the default is to enable system + If 'aspeed,reset-type=' is not specified the default is to enable system reset. Reset types:
Signature · 1 line
2.20.1
Rob Herring
maintainerQuoted 16 lines · Marlon Rac Cambasis
Fixing three spelling errors within
Documentation/devicetree/bindings. "specfied" replaced with "specified" in all three files modified. This should hopefully reduce any confusion that a reader might have.Signed-off-by Marlon Rac Cambasis <[email protected]>--- Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt | 2 +- Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt | 2 +- Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +0
-0
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt Required Properties: · line 78
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +1
-1@@ -75,7 +75,7 @@ Required Properties: The child node should contain a list of pin(s) on which a particular pin function selection or pin configuration (or both) have to applied. This list of pins is specified using the property name "samsung,pins". There - should be atleast one pin specfied for this property and there is no upper + should be atleast one pin specified for this property and there is no upper
Perhaps fix 'atleast' while here.
Quoted 32 lines
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +0
-0limit on the count of pins that can be specified. The pins are specified using pin names which are derived from the hardware manual of the SoC. As an example, the pins in GPA0 bank of the pin controller can be representedDocumentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt +1
-1@@ -9,7 +9,7 @@ Optional property: - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. NPCM7xx contain four software reset that represent numbers 1 to 4. - If 'nuvoton,sw-reset-number' is not specfied software reset is disabled. + If 'nuvoton,sw-reset-number' is not specified software reset is disabled. Example: rstc: rstc@f0801000 {Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt +1
-1@@ -20,7 +20,7 @@ Optional properties: This is useful in situations where another watchdog engine on chip is to perform the reset. - If 'aspeed,reset-type=' is not specfied the default is to enable system + If 'aspeed,reset-type=' is not specified the default is to enable system reset. Reset types:Signature · 1 line
2.20.1
PATCH 1/1 Docs: Fixing spelling errors in Documentation/devicetree/bindings/
Revised patch fixing six spelling errors within Documentation/devicetree/bindings/. "specfied" replaced with "specified" in all three files modified. "atleast" seperated into "at least" three times in samsung-pinctrl.txt. This should remove any confusion that a reader might have.
Signed-off-by Marlon Rac Cambasis <[email protected]>
--- .../devicetree/bindings/pinctrl/samsung-pinctrl.txt | 6 +++--- .../devicetree/bindings/reset/nuvoton,npcm-reset.txt | 2 +- Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-)
Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +3 -3
@@ -65,7 +65,7 @@ Required Properties: - Pin mux/config groups as child nodes: The pin mux (selecting pin function mode) and pin config (pull up/down, driver strength) settings are represented - as child nodes of the pin-controller node. There should be atleast one + as child nodes of the pin-controller node. There should be at least one child node and there is no limit on the count of these child nodes. It is also possible for a child node to consist of several further child nodes to allow grouping multiple pinctrl groups into one. The format of second
@@ -75,7 +75,7 @@ Required Properties: The child node should contain a list of pin(s) on which a particular pin function selection or pin configuration (or both) have to applied. This list of pins is specified using the property name "samsung,pins". There - should be atleast one pin specfied for this property and there is no upper + should be at least one pin specified for this property and there is no upper limit on the count of pins that can be specified. The pins are specified using pin names which are derived from the hardware manual of the SoC. As an example, the pins in GPA0 bank of the pin controller can be represented
@@ -107,7 +107,7 @@ Required Properties: hardware manual and these values are programmed as-is into the pin pull up/down and driver strength register of the pin-controller. - Note: A child should include atleast a pin function selection property or + Note: A child should include at least a pin function selection property or pin configuration property (one or more) or both. The client nodes that require a particular pin function selection and/or
Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt +1 -1
@@ -9,7 +9,7 @@ Optional property: - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC. NPCM7xx contain four software reset that represent numbers 1 to 4. - If 'nuvoton,sw-reset-number' is not specfied software reset is disabled. + If 'nuvoton,sw-reset-number' is not specified software reset is disabled. Example: rstc: rstc@f0801000 {
Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt +1 -1
@@ -20,7 +20,7 @@ Optional properties: This is useful in situations where another watchdog engine on chip is to perform the reset. - If 'aspeed,reset-type=' is not specfied the default is to enable system + If 'aspeed,reset-type=' is not specified the default is to enable system reset. Reset types:
Signature · 1 line
2.20.1
Re: [PATCH] Docs: Fixing spelling errors in Documentation/devicetree/bindings/
Quoted 6 lines · Marlon Rac Cambasis
Revised patch fixing six spelling errors within
Documentation/devicetree/bindings/. "specfied" replaced with "specified" in all three files modified. "atleast" seperated into "at least" three times in samsung-pinctrl.txt. This should remove any confusion that a reader might have.
Quoted 7 lines
Signed-off-by Marlon Rac Cambasis <[email protected]>--- .../devicetree/bindings/pinctrl/samsung-pinctrl.txt | 6 +++--- .../devicetree/bindings/reset/nuvoton,npcm-reset.txt | 2 +- Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-)
Applied, thanks!