dt-bindings: tas2764: Add the TAS2764 binding doc

new file mode 100644
index 000000000000..5bf8c76ecda1
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/tas2764.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments TAS2764 Smart PA
+
+maintainers:
+  - Dan Murphy <[email protected]>
+
+description: |
+  The TAS2764 is a mono, digital input Class-D audio amplifier optimized for
+  efficiently driving high peak power into small loudspeakers.
+  Integrated speaker voltage and current sense provides for
+  real time monitoring of loudspeaker behavior.
+
+properties:
+  compatible:
+    enum:
+      - ti,tas2764
+
+  reg:
+    maxItems: 1
+    description: |
+       I2C address of the device can be between 0x38 to 0x45.
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO used to reset the device.
+
+  shutdown-gpios:
+    maxItems: 1
+    description: GPIO used to control the state of the device.
+
+  interrupts:
+    maxItems: 1
+
+  ti,imon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX current sense time slot.
+
+  ti,vmon-slot-no:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: TDM TX voltage sense time slot.
+
+  '#sound-dai-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/gpio/gpio.h>
+   i2c0 {
+     #address-cells = <1>;
+     #size-cells = <0>;
+     codec: codec@38 {
+       compatible = "ti,tas2764";
+       reg = <0x38>;
+       #sound-dai-cells = <1>;
+       interrupt-parent = <&gpio1>;
+       interrupts = <14>;
+       reset-gpios = <&gpio1 15 0>;
+       shutdown-gpios = <&gpio1 15 0>;
+       ti,imon-slot-no = <0>;
+       ti,vmon-slot-no = <2>;
+     };
+   };
+
+...

index a62e0fb467d9..34c6dd04b85a 100644
@@ -195,6 +195,7 @@ config SND_SOC_ALL_CODECS
 	imply SND_SOC_STI_SAS
 	imply SND_SOC_TAS2552
 	imply SND_SOC_TAS2562
+	imply SND_SOC_TAS2764
 	imply SND_SOC_TAS2770
 	imply SND_SOC_TAS5086
 	imply SND_SOC_TAS571X

@@ -1303,6 +1304,10 @@ config SND_SOC_TAS2562
 	tristate "Texas Instruments TAS2562 Mono Audio amplifier"
 	depends on I2C
 
+config SND_SOC_TAS2764
+	tristate "Texas Instruments TAS2764 Mono Audio amplifier"
+	depends on I2C
+
 config SND_SOC_TAS2770
 	tristate "Texas Instruments TAS2770 speaker amplifier"
 	depends on I2C

index 0404bc1ddcfb..11ce98c25d6c 100644
@@ -304,6 +304,7 @@ snd-soc-simple-amplifier-objs := simple-amplifier.o
 snd-soc-tpa6130a2-objs := tpa6130a2.o
 snd-soc-tas2552-objs := tas2552.o
 snd-soc-tas2562-objs := tas2562.o
+snd-soc-tas2764-objs := tas2764.o
 
 obj-$(CONFIG_SND_SOC_88PM860X)	+= snd-soc-88pm860x.o
 obj-$(CONFIG_SND_SOC_AB8500_CODEC)	+= snd-soc-ab8500-codec.o

@@ -517,6 +518,7 @@ obj-$(CONFIG_SND_SOC_STAC9766)	+= snd-soc-stac9766.o
 obj-$(CONFIG_SND_SOC_STI_SAS)	+= snd-soc-sti-sas.o
 obj-$(CONFIG_SND_SOC_TAS2552)	+= snd-soc-tas2552.o
 obj-$(CONFIG_SND_SOC_TAS2562)	+= snd-soc-tas2562.o
+obj-$(CONFIG_SND_SOC_TAS2764)	+= snd-soc-tas2764.o
 obj-$(CONFIG_SND_SOC_TAS5086)	+= snd-soc-tas5086.o
 obj-$(CONFIG_SND_SOC_TAS571X)	+= snd-soc-tas571x.o
 obj-$(CONFIG_SND_SOC_TAS5720)	+= snd-soc-tas5720.o