phy: omap-usb2-phy: Drop usage of "ti, dis-chg-det-quirk" DT property
PATCH 1/1 phy: omap-usb2-phy: Drop usage of "ti, dis-chg-det-quirk" DT property
"ti,dis-chg-det-quirk" property is not part of Linux kernel DT binding documentation. Therefore drop this and instead use soc_device_match() to distinguish b/w AM654 SR1.0 and SR2.0 devices similar to Linux kernel driver.
Signed-off-by Vignesh Raghavendra <[email protected]>
--- drivers/phy/omap-usb2-phy.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/phy/omap-usb2-phy.c +8 -3
@@ -12,6 +12,7 @@#include <errno.h> #include <generic-phy.h> #include <regmap.h> +#include <soc.h> #include <syscon.h> #include <linux/bitops.h> #include <linux/err.h>
@@ -196,6 +197,11 @@ struct phy_ops omap_usb2_phy_ops = { .exit = omap_usb2_phy_exit, }; +static const struct soc_attr am65x_sr10_soc_devices[] = { + { .family ="AM65X" , .revision ="SR1.0" }, + {/* sentinel */ } +}; +int omap_usb2_phy_probe (struct udevice *dev) {int rc;
@@ -222,10 +228,9 @@ int omap_usb2_phy_probe(struct udevice *dev)* Disabling the USB2_PHY Charger Detect function will put D+ * into the normal state. * -* Using property "ti,dis-chg-det-quirk" in the DT usb2-phy node -* to enable this workaround for AM654x PG1.0. +* Enable this workaround for AM654x PG1.0. */ -if (dev_read_bool (dev,"ti,dis-chg-det-quirk" )) +if (soc_device_match (am65x_sr10_soc_devices)) priv->flags |=OMAP_USB2_DISABLE_CHG_DET ; regmap =syscon_regmap_lookup_by_phandle (dev,"syscon-phy-power" );
Signature · 1 line
2.28.0
PATCH 1/1 phy: omap-usb2-phy: Drop usage of "ti, dis-chg-det-quirk" DT property
Quoted 6 lines · Vignesh Raghavendra
"ti,dis-chg-det-quirk" property is not part of Linux kernel DT binding documentation. Therefore drop this and instead use
soc_device_match()to distinguish b/w AM654 SR1.0 and SR2.0 devices similar to Linux kernel driver.Signed-off-by Vignesh Raghavendra <[email protected]>
Applied to u-boot-ti.
Thanks and regards,
Lokesh