clk: at91: clk-master: add 5th divisor for mck master
Subsystems (2)
PATCH 1/2 clk: at91: clk-master: add 5th divisor for mck master
clk-master can have 5 divisors with a field width of 3 bits on some products.
Change the mask and number of divisors accordingly.
Reported-by Mihai Sain <[email protected]>
Signed-off-by Eugen Hristev <[email protected]>
Reviewed-by Claudiu Beznea <[email protected]>
--- drivers/clk/at91/clk-master.c | 2 +- drivers/clk/at91/pmc.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/clk/at91/clk-master.c +1 -1
@@ -24,7 +24,7 @@#define MASTER_PRES_MASK 0x7#define MASTER_PRES_MAX MASTER_PRES_MASK#define MASTER_DIV_SHIFT 8 -#define MASTER_DIV_MASK 0x3 +#define MASTER_DIV_MASK 0x7#define PMC_MCR 0x30#define PMC_MCR_ID_MSK GENMASK(3, 0)
drivers/clk/at91/pmc.h +1 -1
@@ -30,7 +30,7 @@ extern const struct clk_master_layout at91sam9x5_master_layout;struct clk_master_characteristics {struct clk_range output; -u32 divisors[4 ]; +u32 divisors[5 ];u8 have_div3_pres; };
Signature · 1 line
2.25.1
PATCH 1/2 clk: at91: clk-master: add 5th divisor for mck master
Quoted 9 lines · Eugen Hristev
clk-master can have 5 divisors with a field width of 3 bits on some products.
Change the mask and number of divisors accordingly.
Reported-by Mihai Sain <[email protected]>Signed-off-by Eugen Hristev <[email protected]>Reviewed-by Claudiu Beznea <[email protected]>---
Applied both to u-boot-atmel/master
PATCH 2/2 clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
In reply to Eugen HristevThis SoC has the 5th divisor for the mck0 master clock. Adapt the characteristics accordingly.
Reported-by Mihai Sain <[email protected]>
Signed-off-by Eugen Hristev <[email protected]>
Reviewed-by Claudiu Beznea <[email protected]>
--- drivers/clk/at91/sama7g5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/clk/at91/sama7g5.c +2 -2
@@ -189,13 +189,13 @@ static const struct clk_pll_layout pll_layout_divio = {/* MCK0 characteristics. */ static const struct clk_master_characteristics mck0_characteristics = { .output = { .min =140000000 , .max =200000000 }, - .divisors = {1 ,2 ,4 ,3 }, + .divisors = {1 ,2 ,4 ,3 ,5 }, .have_div3_pres =1 , };/* MCK0 layout. */ static const struct clk_master_layout mck0_layout = { - .mask =0x373 , + .mask =0x773 , .pres_shift =4 , .offset =0x28 , };
Signature · 1 line
2.25.1