armv8: dts: fsl-lx2162a: add dspi node into qds dts
PATCH v2 1/1 armv8: dts: fsl-lx2162a: add dspi node into qds dts
From: Zhao Qiang <[email protected]>
Add dspi node into lx2162aqds device tree
---
depends on: https://patchwork.ozlabs.org/project/uboot/patch/1599473527-21511-3-git-send-email-meenakshi.aggarwal at nxp.com/
changes for v2:
- add alias part
arch/arm/dts/fsl-lx2162a-qds.dts | 102 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+)
arch/arm/dts/fsl-lx2162a-qds.dts +102 -0
@@ -16,6 +16,108 @@ aliases { spi0 = &fspi; + spi1 = &dspi0; + spi2 = &dspi1; + spi3 = &dspi2; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <1>; + }; + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <2>; + }; +}; + +&dspi1 { + bus-num = <0>; + status = "okay"; + + dflash3: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; + dflash4: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <1>; + }; + dflash5: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <2>; + }; +}; + +&dspi2 { + bus-num = <0>; + status = "okay"; + + dflash6: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; + dflash7: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <1>; + }; + dflash8: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <3000000>; + spi-cpol; + spi-cpha; + reg = <2>; }; };
Signature · 1 line
2.7.4
PATCH v2 1/1 armv8: dts: fsl-lx2162a: add dspi node into qds dts
Quoted 8 lines
-----Original Message-----
From: Qiang Zhao <[email protected]>
Sent: Friday, October 9, 2020 10:48 AM
To: Priyanka Jain <[email protected]>; Meenakshi Aggarwal <[email protected]>
Cc: u-boot at lists.denx.de; Qiang Zhao <[email protected]>
Subject: [Patch v2] armv8: dts: fsl-lx2162a: add dspi node into qds dts
Quoted 6 lines
From: Zhao Qiang <[email protected]>
Add dspi node into lx2162aqds device tree
Signed-off-by Zhao Qiang <[email protected]>---
LX2162QDS base support is now merged in fsl-qoriq tree.
https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Kindly rebase this patch.
Regards
Priyanka
PATCH v2 1/1 armv8: dts: fsl-lx2162a: add dspi node into qds dts
Quoted 19 lines
-----Original Message-----
From: Priyanka Jain <[email protected]>
Sent: 2020?12?11? 16:15
To: Qiang Zhao <[email protected]>; Meenakshi Aggarwal <[email protected]>
Cc: u-boot at lists.denx.de; Qiang Zhao <[email protected]>
Subject: RE: [Patch v2] armv8: dts: fsl-lx2162a: add dspi node into qds dtsQuoted 10 lines
-----Original Message-----
From: Qiang Zhao <[email protected]>
Sent: Friday, October 9, 2020 10:48 AM
To: Priyanka Jain <[email protected]>; Meenakshi Aggarwal <[email protected]>
Cc: u-boot at lists.denx.de; Qiang Zhao <[email protected]>
Subject: [Patch v2] armv8: dts: fsl-lx2162a: add dspi node into qds dtsFrom: Zhao Qiang <[email protected]>
Quoted 8 lines
Quoted 4 lines
Add dspi node into lx2162aqds device tree
Signed-off-by Zhao Qiang <[email protected]>---
LX2162QDS base support is now merged in fsl-qoriq tree.
https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqKindly rebase this patch.
Rebased
Best Regards,
Qiang Zhao