Skip to contentSkip to conversation

mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()

PATCH New Michael Walle 1 participant 2 messages Oct 12, 2020 MMC, SD and SDIO

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()

Make the code cleaner and drop the old-style #ifdef constructs where it is possible.

---
changes since v1:
- rebased to latest mmc tree

 drivers/mmc/fsl_esdhc.c | 138 +++++++++++++++++++---------------------
 1 file changed, 65 insertions(+), 73 deletions(-)
drivers/mmc/fsl_esdhc.c +65 -73
index 10a699f692..15f8175660 100644
@@ -109,17 +109,15 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 
 	if (data) {
 		xfertyp |= XFERTYP_DPSEL;
-#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-		if (cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK &&
+		if (!IS_ENABLED(CONFIG_SYS_FSL_ESDHC_USE_PIO) &&
+		    cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK &&
 		    cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK_HS200)
 			xfertyp |= XFERTYP_DMAEN;
-#endif
 		if (data->blocks > 1) {
 			xfertyp |= XFERTYP_MSBSEL;
 			xfertyp |= XFERTYP_BCEN;
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
-			xfertyp |= XFERTYP_AC12EN;
-#endif
+			if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC111))
+				xfertyp |= XFERTYP_AC12EN;
 		}
 
 		if (data->flags & MMC_DATA_READ)
@@ -143,7 +141,6 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 	return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
 }
 
-#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
 /*
  * PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
  */
@@ -206,9 +203,7 @@ static void esdhc_pio_read_write(struct fsl_esdhc_priv *priv,
 		}
 	}
 }
-#endif
 
-#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
 static void esdhc_setup_watermark_level(struct fsl_esdhc_priv *priv,
 					struct mmc_data *data)
 {
@@ -228,7 +223,6 @@ static void esdhc_setup_watermark_level(struct fsl_esdhc_priv *priv,
 				   wml_value << 16);
 	}
 }
-#endif
 
 static void esdhc_setup_dma(struct fsl_esdhc_priv *priv, struct mmc_data *data)
 {
@@ -261,11 +255,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 		return -EINVAL;
 	}
 
-#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
-	esdhc_setup_watermark_level(priv, data);
-#else
-	esdhc_setup_dma(priv, data);
-#endif
+	if (IS_ENABLED(CONFIG_SYS_FSL_ESDHC_USE_PIO))
+		esdhc_setup_watermark_level(priv, data);
+	else
+		esdhc_setup_dma(priv, data);
 
 	/* Calculate the timeout period for data transactions */
 	/*
@@ -298,14 +291,13 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 	if (timeout < 0)
 		timeout = 0;
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
-	if ((timeout == 4) || (timeout == 8) || (timeout == 12))
+	if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001) &&
+	    (timeout == 4 || timeout == 8 || timeout == 12))
 		timeout++;
-#endif
 
-#ifdef ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
-	timeout = 0xE;
-#endif
+	if (IS_ENABLED(ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE))
+		timeout = 0xE;
+
 	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);
 
 	return 0;
@@ -325,10 +317,9 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 	struct fsl_esdhc *regs = priv->esdhc_regs;
 	unsigned long start;
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
-	if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+	if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC111) &&
+	    cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
 		return 0;
-#endif
 
 	esdhc_write32(&regs->irqstat, -1);
 
@@ -426,37 +417,37 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 
 	/* Wait until all of the blocks are transferred */
 	if (data) {
-#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
-		esdhc_pio_read_write(priv, data);
-#else
-		flags = DATA_COMPLETE;
-		if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
-		    cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
-			flags = IRQSTAT_BRR;
-
-		do {
-			irqstat = esdhc_read32(&regs->irqstat);
+		if (IS_ENABLED(CONFIG_SYS_FSL_ESDHC_USE_PIO)) {
+			esdhc_pio_read_write(priv, data);
+		} else {
+			flags = DATA_COMPLETE;
+			if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
+			    cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)
+				flags = IRQSTAT_BRR;
+
+			do {
+				irqstat = esdhc_read32(&regs->irqstat);
 
-			if (irqstat & IRQSTAT_DTOE) {
-				err = -ETIMEDOUT;
-				goto out;
-			}
+				if (irqstat & IRQSTAT_DTOE) {
+					err = -ETIMEDOUT;
+					goto out;
+				}
 
-			if (irqstat & DATA_ERR) {
-				err = -ECOMM;
-				goto out;
-			}
-		} while ((irqstat & flags) != flags);
-
-		/*
-		 * Need invalidate the dcache here again to avoid any
-		 * cache-fill during the DMA operations such as the
-		 * speculative pre-fetching etc.
-		 */
-		dma_unmap_single(priv->dma_addr,
-				 data->blocks * data->blocksize,
-				 mmc_get_dma_dir(data));
-#endif
+				if (irqstat & DATA_ERR) {
+					err = -ECOMM;
+					goto out;
+				}
+			} while ((irqstat & flags) != flags);
+
+			/*
+			 * Need invalidate the dcache here again to avoid any
+			 * cache-fill during the DMA operations such as the
+			 * speculative pre-fetching etc.
+			 */
+			dma_unmap_single(priv->dma_addr,
+					 data->blocks * data->blocksize,
+					 mmc_get_dma_dir(data));
+		}
 	}
 
 out:
@@ -735,12 +726,10 @@ static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv,
 	u32 caps;
 
 	caps = esdhc_read32(&regs->hostcapblt);
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
-	caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30);
-#endif
-#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-	caps |= HOSTCAPBLT_VS33;
-#endif
+	if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_ESDHC135))
+		caps &= ~(HOSTCAPBLT_SRS | HOSTCAPBLT_VS18 | HOSTCAPBLT_VS30);
+	if (IS_ENABLED(CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33))
+		caps |= HOSTCAPBLT_VS33;
 	if (caps & HOSTCAPBLT_VS18)
 		cfg->voltages |= MMC_VDD_165_195;
 	if (caps & HOSTCAPBLT_VS30)
@@ -761,19 +750,18 @@ static void fsl_esdhc_get_cfg_common(struct fsl_esdhc_priv *priv,
 #ifdef CONFIG_OF_LIBFDT
 __weak int esdhc_status_fixup(void *blob, const char *compat)
 {
-#ifdef CONFIG_FSL_ESDHC_PIN_MUX
-	if (!hwconfig("esdhc")) {
+	if (IS_ENABLED(CONFIG_FSL_ESDHC_PIN_MUX) && !hwconfig("esdhc")) {
 		do_fixup_by_compat(blob, compat, "status", "disabled",
 				sizeof("disabled"), 1);
 		return 1;
 	}
-#endif
+
 	return 0;
 }
 
-#ifdef CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
-static int fsl_esdhc_get_cd(struct udevice *dev);
 
+#if CONFIG_IS_ENABLED(DM_MMC)
+static int fsl_esdhc_get_cd(struct udevice *dev);
 static void esdhc_disable_for_no_card(void *blob)
 {
 	struct udevice *dev;
@@ -792,6 +780,10 @@ static void esdhc_disable_for_no_card(void *blob)
 				 sizeof("disabled"), 1);
 	}
 }
+#else
+static void esdhc_disable_for_no_card(void *blob)
+{
+}
 #endif
 
 void fdt_fixup_esdhc(void *blob, struct bd_info *bd)
@@ -800,9 +792,10 @@ void fdt_fixup_esdhc(void *blob, struct bd_info *bd)
 
 	if (esdhc_status_fixup(blob, compat))
 		return;
-#ifdef CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
-	esdhc_disable_for_no_card(blob);
-#endif
+
+	if (IS_ENABLED(CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND))
+		esdhc_disable_for_no_card(blob);
+
 	do_fixup_by_compat_u32(blob, compat, "clock-frequency",
 			       gd->arch.sdhc_clk, 1);
 }
@@ -884,10 +877,9 @@ int fsl_esdhc_initialize(struct bd_info *bis, struct fsl_esdhc_cfg *cfg)
 		printf("No max bus width provided. Assume 8-bit supported.\n");
 	}
 
-#ifdef CONFIG_ESDHC_DETECT_8_BIT_QUIRK
-	if (CONFIG_ESDHC_DETECT_8_BIT_QUIRK)
+	if (IS_ENABLED(CONFIG_ESDHC_DETECT_8_BIT_QUIRK))
 		mmc_cfg->host_caps &= ~MMC_MODE_8BIT;
-#endif
+
 	mmc_cfg->ops = &esdhc_ops;
 
 	fsl_esdhc_get_cfg_common(priv, mmc_cfg);
@@ -959,10 +951,10 @@ static int fsl_esdhc_probe(struct udevice *dev)
 	if (ret)
 		return ret;
 
-#ifdef CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
-	if (!fsl_esdhc_get_cd(dev))
+	if (IS_ENABLED(CONFIG_FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND) &&
+	    !fsl_esdhc_get_cd(dev))
 		esdhc_setbits32(&priv->esdhc_regs->proctl, PROCTL_VOLT_SEL);
-#endif
+
 	return 0;
 }
 
Signature · 1 line
2.20.1
#1 lore raw

PATCH v2 2/2 mmc: fsl_esdhc: add ADMA2 support

Newer eSDHC controllers support ADMA2 descriptor tables which support 64bit DMA addresses. One notable user of addresses in the upper memory segment is the EFI loader.

If support is enabled, but the controller doesn't support ADMA2, we will fall back to SDMA (and thus 32 bit DMA addresses only).

---
changes since v1:
- rebased to latest mmc tree

 drivers/mmc/Kconfig     |  8 +++++++
 drivers/mmc/fsl_esdhc.c | 50 ++++++++++++++++++++++++++++++++++++-----
 include/fsl_esdhc.h     | 14 ++++++++++++
 3 files changed, 67 insertions(+), 5 deletions(-)
drivers/mmc/Kconfig +8 -0
index 88582db58c..14d7913986 100644
@@ -755,6 +755,14 @@ config FSL_ESDHC
 	  This selects support for the eSDHC (Enhanced Secure Digital Host
 	  Controller) found on numerous Freescale/NXP SoCs.
 
+config FSL_ESDHC_SUPPORT_ADMA2
+	bool "enable ADMA2 support"
+	depends on FSL_ESDHC
+	select MMC_SDHCI_ADMA_HELPERS
+	help
+	  This enables support for the ADMA2 transfer mode. If supported by the
+	  eSDHC it will allow 64bit DMA addresses.
+
 config FSL_ESDHC_33V_IO_RELIABILITY_WORKAROUND
 	bool "enable eSDHC workaround for 3.3v IO reliability issue"
 	depends on FSL_ESDHC && DM_MMC
drivers/mmc/fsl_esdhc.c +45 -5

92 lines not on this page · raw message

include/fsl_esdhc.h +14 -0
index cc119668d6..e6f1c75e27 100644
@@ -97,6 +97,10 @@
 #define PROCTL_DTW_4		0x00000002
 #define PROCTL_DTW_8		0x00000004
 #define PROCTL_D3CD		0x00000008
+#define PROCTL_DMAS_MASK	0x00000300
+#define PROCTL_DMAS_SDMA	0x00000000
+#define PROCTL_DMAS_ADMA1	0x00000100
+#define PROCTL_DMAS_ADMA2	0x00000300
 #define PROCTL_VOLT_SEL		0x00000400
 
 #define CMDARG			0x0002e008
@@ -187,6 +191,16 @@
 
 #define MAX_TUNING_LOOP		40
 
+#define HOSTVER_VENDOR(x)	(((x) >> 8) & 0xff)
+#define VENDOR_V_10		0x00
+#define VENDOR_V_20		0x10
+#define VENDOR_V_21		0x11
+#define VENDOR_V_22		0x12
+#define VENDOR_V_23		0x13
+#define VENDOR_V_30		0x20
+#define VENDOR_V_31		0x21
+#define VENDOR_V_32		0x22
+
 struct fsl_esdhc_cfg {
 	phys_addr_t esdhc_base;
 	u32	sdhc_clk;
Signature · 1 line
2.20.1