Skip to contentSkip to conversation

ASoC: sof: cleanup Kconfig files

PATCH In review Randy Dunlap 2 participants 6 messages Oct 14, 2020

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover ASoC: sof: cleanup Kconfig files

Cc Pierre-Louis Bossart <[email protected]>
Cc Liam Girdwood <[email protected]>
Cc Ranjani Sridharan <[email protected]>
Cc Kai Vehmanen <[email protected]>
Cc Daniel Baluta <[email protected]>

Some general editing of sound/soc/sof/ Kconfig files:

[PATCH 1/3] ASoC: sof: imx: fix Kconfig punctuation [PATCH 2/3] ASoC: sof: intel: fix Kconfig punctuation and wording [PATCH 3/3] ASoC: sof: Kconfig: fix Kconfig punctuation and wording

 sound/soc/sof/Kconfig       |   42 +++++++++++------------
 sound/soc/sof/imx/Kconfig   |   10 ++---
 sound/soc/sof/intel/Kconfig |   62 +++++++++++++++++-----------------
 3 files changed, 57 insertions(+), 57 deletions(-)
#1 lore raw

PATCH 1/3 ASoC: sof: imx: fix Kconfig punctuation

Add periods at the end of sentences in help text.

Cc Pierre-Louis Bossart <[email protected]>
Cc Liam Girdwood <[email protected]>
Cc Ranjani Sridharan <[email protected]>
Cc Kai Vehmanen <[email protected]>
Cc Daniel Baluta <[email protected]>
---
 sound/soc/sof/imx/Kconfig |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
sound/soc/sof/imx/Kconfig +5 -5
@@ -17,7 +17,7 @@ config SND_SOC_SOF_IMX_OF
 	select SND_SOC_SOF_IMX8M if SND_SOC_SOF_IMX8M_SUPPORT
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_IMX_COMMON
 	tristate
@@ -30,7 +30,7 @@ config SND_SOC_SOF_IMX8_SUPPORT
 	depends on IMX_SCU=y || IMX_SCU=SND_SOC_SOF_IMX_OF
 	depends on IMX_DSP=y || IMX_DSP=SND_SOC_SOF_IMX_OF
 	help
-	  This adds support for Sound Open Firmware for NXP i.MX8 platforms
+	  This adds support for Sound Open Firmware for NXP i.MX8 platforms.
 	  Say Y if you have such a device.
 	  If unsure select "N".
 
@@ -40,13 +40,13 @@ config SND_SOC_SOF_IMX8
 	select SND_SOC_SOF_XTENSA
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_IMX8M_SUPPORT
 	bool "SOF support for i.MX8M"
 	depends on IMX_DSP=y || IMX_DSP=SND_SOC_SOF_OF
 	help
-	  This adds support for Sound Open Firmware for NXP i.MX8M platforms
+	  This adds support for Sound Open Firmware for NXP i.MX8M platforms.
 	  Say Y if you have such a device.
 	  If unsure select "N".
 
@@ -56,6 +56,6 @@ config SND_SOC_SOF_IMX8M
 	select SND_SOC_SOF_XTENSA
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 endif ## SND_SOC_SOF_IMX_IMX_TOPLEVEL
#2 lore raw

PATCH 2/3 ASoC: sof: intel: fix Kconfig punctuation and wording

In reply to Randy Dunlap

Add periods at the end of sentences in help text.
Insert a "not" in one place.
Fix help text indentation.
Remove a duplicate "Intel(R)" in one place.

Cc Pierre-Louis Bossart <[email protected]>
Cc Liam Girdwood <[email protected]>
Cc Ranjani Sridharan <[email protected]>
Cc Kai Vehmanen <[email protected]>
Cc Daniel Baluta <[email protected]>
---
 sound/soc/sof/intel/Kconfig |   62 +++++++++++++++++-----------------
 1 file changed, 31 insertions(+), 31 deletions(-)
sound/soc/sof/intel/Kconfig +31 -31
@@ -15,7 +15,7 @@ config SND_SOC_SOF_INTEL_ACPI
 	select SND_SOC_SOF_BROADWELL if SND_SOC_SOF_BROADWELL_SUPPORT
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_INTEL_PCI
 	def_tristate SND_SOC_SOF_PCI
@@ -31,13 +31,13 @@ config SND_SOC_SOF_INTEL_PCI
 	select SND_SOC_SOF_JASPERLAKE  if SND_SOC_SOF_JASPERLAKE_SUPPORT
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_INTEL_HIFI_EP_IPC
 	tristate
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_INTEL_ATOM_HIFI_EP
 	tristate
@@ -45,7 +45,7 @@ config SND_SOC_SOF_INTEL_ATOM_HIFI_EP
 	select SND_SOC_SOF_INTEL_HIFI_EP_IPC
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_INTEL_COMMON
 	tristate
@@ -55,7 +55,7 @@ config SND_SOC_SOF_INTEL_COMMON
 	select SND_SOC_ACPI if ACPI
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 if SND_SOC_SOF_INTEL_ACPI
 
@@ -72,7 +72,7 @@ config SND_SOC_SOF_BAYTRAIL_SUPPORT
 	  recommended for distros. At some point all legacy drivers will be
 	  deprecated but not before all userspace firmware/topology/UCM files
 	  are made available to downstream distros.
-	  Say Y if you want to enable SOF on Baytrail/Cherrytrail
+	  Say Y if you want to enable SOF on Baytrail/Cherrytrail.
 	  If unsure select "N".
 
 config SND_SOC_SOF_BAYTRAIL
@@ -80,7 +80,7 @@ config SND_SOC_SOF_BAYTRAIL
 	select SND_SOC_SOF_INTEL_ATOM_HIFI_EP
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_BROADWELL_SUPPORT
 	bool "SOF support for Broadwell"
@@ -91,11 +91,11 @@ config SND_SOC_SOF_BROADWELL_SUPPORT
 	  This option is mutually exclusive with the Haswell/Broadwell legacy
 	  driver. If you want to enable SOF on Broadwell you need to deselect
 	  the legacy driver first.
-	  SOF does fully support Broadwell yet, so this option is not
+	  SOF does not fully support Broadwell yet, so this option is not
 	  recommended for distros. At some point all legacy drivers will be
 	  deprecated but not before all userspace firmware/topology/UCM files
 	  are made available to downstream distros.
-	  Say Y if you want to enable SOF on Broadwell
+	  Say Y if you want to enable SOF on Broadwell.
 	  If unsure select "N".
 
 config SND_SOC_SOF_BROADWELL
@@ -104,7 +104,7 @@ config SND_SOC_SOF_BROADWELL
 	select SND_SOC_SOF_INTEL_HIFI_EP_IPC
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 endif ## SND_SOC_SOF_INTEL_ACPI
 
@@ -123,7 +123,7 @@ config SND_SOC_SOF_MERRIFIELD
 	select SND_SOC_SOF_INTEL_ATOM_HIFI_EP
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_APOLLOLAKE_SUPPORT
 	bool "SOF support for Apollolake"
@@ -138,7 +138,7 @@ config SND_SOC_SOF_APOLLOLAKE
 	select SND_SOC_SOF_HDA_COMMON
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_GEMINILAKE_SUPPORT
 	bool "SOF support for GeminiLake"
@@ -153,7 +153,7 @@ config SND_SOC_SOF_GEMINILAKE
 	select SND_SOC_SOF_HDA_COMMON
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_CANNONLAKE_SUPPORT
 	bool "SOF support for Cannonlake"
@@ -169,7 +169,7 @@ config SND_SOC_SOF_CANNONLAKE
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_COFFEELAKE_SUPPORT
 	bool "SOF support for CoffeeLake"
@@ -185,7 +185,7 @@ config SND_SOC_SOF_COFFEELAKE
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_ICELAKE_SUPPORT
 	bool "SOF support for Icelake"
@@ -201,7 +201,7 @@ config SND_SOC_SOF_ICELAKE
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_COMETLAKE
 	tristate
@@ -209,7 +209,7 @@ config SND_SOC_SOF_COMETLAKE
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_COMETLAKE_SUPPORT
 	bool
@@ -236,7 +236,7 @@ config SND_SOC_SOF_TIGERLAKE
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_ELKHARTLAKE_SUPPORT
 	bool "SOF support for ElkhartLake"
@@ -252,7 +252,7 @@ config SND_SOC_SOF_ELKHARTLAKE
 	select SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_JASPERLAKE_SUPPORT
 	bool "SOF support for JasperLake"
@@ -267,7 +267,7 @@ config SND_SOC_SOF_JASPERLAKE
 	select SND_SOC_SOF_HDA_COMMON
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_HDA_COMMON
 	tristate
@@ -275,7 +275,7 @@ config SND_SOC_SOF_HDA_COMMON
 	select SND_SOC_SOF_HDA_LINK_BASELINE
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 if SND_SOC_SOF_HDA_COMMON
 
@@ -285,7 +285,7 @@ config SND_SOC_SOF_HDA_LINK
 	select SND_SOC_SOF_PROBE_WORK_QUEUE
 	help
 	  This adds support for HDA links(HDA/HDMI) with Sound Open Firmware
-		  for Intel(R) platforms.
+	  for Intel(R) platforms.
 	  Say Y if you want to enable HDA links with SOF.
 	  If unsure select "N".
 
@@ -294,7 +294,7 @@ config SND_SOC_SOF_HDA_AUDIO_CODEC
 	depends on SND_SOC_SOF_HDA_LINK
 	help
 	  This adds support for HDAudio codecs with Sound Open Firmware
-		  for Intel(R) platforms.
+	  for Intel(R) platforms.
 	  Say Y if you want to enable HDAudio codecs with SOF.
 	  If unsure select "N".
 
@@ -302,8 +302,8 @@ config SND_SOC_SOF_HDA_PROBES
 	bool "SOF enable probes over HDA"
 	depends on SND_SOC_SOF_DEBUG_PROBES
 	help
-	  This option enables the data probing for Intel(R).
-		  Intel(R) Skylake and newer platforms.
+	  This option enables the data probing for Intel(R)
+	  Skylake and newer platforms.
 	  Say Y if you want to enable probes.
 	  If unsure, select "N".
 
@@ -314,7 +314,7 @@ config SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI
 	  and disables known workarounds for specific HDAudio platforms.
 	  Only use to look into power optimizations on platforms not
 	  affected by DMI L1 issues. This option is not recommended.
-	  Say Y if you want to enable DMI Link L1
+	  Say Y if you want to enable DMI Link L1.
 	  If unsure, select "N".
 
 endif ## SND_SOC_SOF_HDA_COMMON
@@ -324,7 +324,7 @@ config SND_SOC_SOF_HDA_LINK_BASELINE
 	select SND_SOC_SOF_HDA if SND_SOC_SOF_HDA_LINK
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_HDA
 	tristate
@@ -333,14 +333,14 @@ config SND_SOC_SOF_HDA
 	select SND_INTEL_DSP_CONFIG
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK
 	bool "SOF support for SoundWire"
 	depends on SOUNDWIRE && ACPI
 	help
 	  This adds support for SoundWire with Sound Open Firmware
-		  for Intel(R) platforms.
+	  for Intel(R) platforms.
 	  Say Y if you want to enable SoundWire links with SOF.
 	  If unsure select "N".
 
@@ -349,14 +349,14 @@ config SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_
 	select SND_SOC_SOF_INTEL_SOUNDWIRE if SND_SOC_SOF_INTEL_SOUNDWIRE_LINK
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 config SND_SOC_SOF_INTEL_SOUNDWIRE
 	tristate
 	select SOUNDWIRE_INTEL
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 
 endif ## SND_SOC_SOF_INTEL_PCI
 
#3 lore raw

PATCH 3/3 ASoC: sof: Kconfig: fix Kconfig punctuation and wording

In reply to Randy Dunlap

Add periods at the end of sentences in help text.
Drop "a" in one place where it is not needed.
Fix a verb.
Add some capitalization.

Cc Pierre-Louis Bossart <[email protected]>
Cc Liam Girdwood <[email protected]>
Cc Ranjani Sridharan <[email protected]>
Cc Kai Vehmanen <[email protected]>
Cc Daniel Baluta <[email protected]>
---
 sound/soc/sof/Kconfig |   42 ++++++++++++++++++++--------------------
 1 file changed, 21 insertions(+), 21 deletions(-)
sound/soc/sof/Kconfig +21 -21
@@ -2,7 +2,7 @@
 config SND_SOC_SOF_TOPLEVEL
 	bool "Sound Open Firmware Support"
 	help
-	  This adds support for Sound Open Firmware (SOF). SOF is a free and
+	  This adds support for Sound Open Firmware (SOF). SOF is free and
 	  generic open source audio DSP firmware for multiple devices.
 	  Say Y if you have such a device that is supported by SOF.
 	  If unsure select "N".
@@ -16,8 +16,8 @@ config SND_SOC_SOF_PCI
 	select SND_SOC_ACPI if ACPI
 	help
 	  This adds support for PCI enumeration. This option is
-	  required to enable Intel Skylake+ devices
-	  Say Y if you need this option
+	  required to enable Intel Skylake+ devices.
+	  Say Y if you need this option.
 	  If unsure select "N".
 
 config SND_SOC_SOF_ACPI
@@ -28,8 +28,8 @@ config SND_SOC_SOF_ACPI
 	select IOSF_MBI if X86 && PCI
 	help
 	  This adds support for ACPI enumeration. This option is required
-	  to enable Intel Broadwell/Baytrail/Cherrytrail devices
-	  Say Y if you need this option
+	  to enable Intel Broadwell/Baytrail/Cherrytrail devices.
+	  Say Y if you need this option.
 	  If unsure select "N".
 
 config SND_SOC_SOF_OF
@@ -54,12 +54,12 @@ config SND_SOC_SOF_DEVELOPER_SUPPORT
 	bool "SOF developer options support"
 	depends on EXPERT
 	help
-	  This option unlock SOF developer options for debug/performance/
+	  This option unlocks SOF developer options for debug/performance/
 	  code hardening.
 	  Distributions should not select this option, only SOF development
 	  teams should select it.
-	  Say Y if you are involved in SOF development and need this option
-	  If not, select N
+	  Say Y if you are involved in SOF development and need this option.
+	  If not, select N.
 
 if SND_SOC_SOF_DEVELOPER_SUPPORT
 
@@ -72,13 +72,13 @@ config SND_SOC_SOF_NOCODEC_SUPPORT
 	  This adds support for a dummy/nocodec machine driver fallback
 	  option if no known codec is detected. This is typically only
 	  enabled for developers or devices where the sound card is
-	  controlled externally
-	  This option is mutually exclusive with the Intel HDAudio support,
-	  selecting it may have negative impacts and prevent e.g. microphone
+	  controlled externally.
+	  This option is mutually exclusive with the Intel HDAudio support.
+	  Selecting it may have negative impacts and prevent e.g. microphone
 	  functionality from being enabled on Intel CoffeeLake and later
 	  platforms.
 	  Distributions should not select this option!
-	  Say Y if you need this nocodec fallback option
+	  Say Y if you need this nocodec fallback option.
 	  If unsure select "N".
 
 config SND_SOC_SOF_STRICT_ABI_CHECKS
@@ -92,8 +92,8 @@ config SND_SOC_SOF_STRICT_ABI_CHECKS
 	  is invoked.
 	  This option will stop topology creation and firmware load upfront.
 	  It is intended for SOF CI/releases and not for users or distros.
-	  Say Y if you want strict ABI checks for an SOF release
-	  If you are not involved in SOF releases and CI development
+	  Say Y if you want strict ABI checks for an SOF release.
+	  If you are not involved in SOF releases and CI development,
 	  select "N".
 
 config SND_SOC_SOF_DEBUG
@@ -114,8 +114,8 @@ config SND_SOC_SOF_FORCE_NOCODEC_MODE
 	  though there is a codec detected on the real platform. This is
 	  typically only enabled for developers for debug purposes, before
 	  codec/machine driver is ready, or to exclude the impact of those
-	  drivers
-	  Say Y if you need this force nocodec mode option
+	  drivers.
+	  Say Y if you need this force nocodec mode option.
 	  If unsure select "N".
 
 config SND_SOC_SOF_DEBUG_XRUN_STOP
@@ -137,12 +137,12 @@ config SND_SOC_SOF_DEBUG_VERBOSE_IPC
 config SND_SOC_SOF_DEBUG_FORCE_IPC_POSITION
 	bool "SOF force to use IPC for position update on SKL+"
 	help
-	  This option force to handle stream position update IPCs and run pcm
+	  This option forces to handle stream position update IPCs and run PCM
 	  elapse to inform ALSA about that, on platforms (e.g. Intel SKL+) that
 	  with other approach (e.g. HDAC DPIB/posbuf) to elapse PCM.
 	  On platforms (e.g. Intel SKL-) where position update IPC is the only
 	  one choice, this setting won't impact anything.
-	  if you are trying to debug pointer update with position IPCs or where
+	  If you are trying to debug pointer update with position IPCs or where
 	  DPIB/posbuf is not ready, select "Y".
 	  If unsure select "N".
 
@@ -161,7 +161,7 @@ config SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE
 	help
 	  The firmware trace can be enabled either at build-time with
 	  this option, or dynamically by setting flags in the SOF core
-	  module parameter (similar to dynamic debug)
+	  module parameter (similar to dynamic debug).
 	  If unsure, select "N".
 
 config SND_SOC_SOF_DEBUG_IPC_FLOOD_TEST
@@ -190,7 +190,7 @@ config SND_SOC_SOF
 	select SND_SOC_SOF_NOCODEC if SND_SOC_SOF_NOCODEC_SUPPORT
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 	  The selection is made at the top level and does not exactly follow
 	  module dependencies but since the module or built-in type is decided
 	  at the top level it doesn't matter.
@@ -199,7 +199,7 @@ config SND_SOC_SOF_PROBE_WORK_QUEUE
 	bool
 	help
 	  This option is not user-selectable but automagically handled by
-	  'select' statements at a higher level
+	  'select' statements at a higher level.
 	  When selected, the probe is handled in two steps, for example to
 	  avoid lockdeps if request_module is used in the probe.
 
#4 lore raw
In reply to Randy Dunlap
Quoted 9 lines · Randy Dunlap
Cc Pierre-Louis Bossart <[email protected]>
Cc Liam Girdwood <[email protected]>
Cc Ranjani Sridharan <[email protected]>
Cc Kai Vehmanen <[email protected]>
Cc Daniel Baluta <[email protected]>

Some general editing of sound/soc/sof/ Kconfig files:

Thanks Randy!

That looks all good to me, but I see you didn't CC: Mark Brown and Takashi Iwai so not sure if Mark can apply this directly. Might need to resend the series?

I also can take this series in the SOF tree and combine it with other changes I am making to Kconfigs to remove hard-coded exclusions, that would mean less churn on the same files.

Quoted 9 lines

[PATCH 1/3] ASoC: sof: imx: fix Kconfig punctuation [PATCH 2/3] ASoC: sof: intel: fix Kconfig punctuation and wording [PATCH 3/3] ASoC: sof: Kconfig: fix Kconfig punctuation and wording

  sound/soc/sof/Kconfig       |   42 +++++++++++------------
  sound/soc/sof/imx/Kconfig   |   10 ++---
  sound/soc/sof/intel/Kconfig |   62 +++++++++++++++++-----------------
  3 files changed, 57 insertions(+), 57 deletions(-)
#5 lore raw
Quoted 11 lines · Pierre-Louis Bossart
Quoted 8 lines · Randy Dunlap
Cc Pierre-Louis Bossart <[email protected]>
Cc Liam Girdwood <[email protected]>
Cc Ranjani Sridharan <[email protected]>
Cc Kai Vehmanen <[email protected]>
Cc Daniel Baluta <[email protected]>
Quoted 5 lines
Quoted 1 line

Some general editing of sound/soc/sof/ Kconfig files:

Thanks Randy!

That looks all good to me, but I see you didn't CC: Mark Brown and Takashi Iwai so not sure if Mark can apply this directly. Might need to resend the series?

Oops, my bad.

Quoted 1 line

I also can take this series in the SOF tree and combine it with other changes I am making to Kconfigs to remove hard-coded exclusions, that would mean less churn on the same files.

Please go ahead with this.

Quoted 9 lines
Quoted 9 lines

  [PATCH 1/3] ASoC: sof: imx: fix Kconfig punctuation [PATCH 2/3] ASoC: sof: intel: fix Kconfig punctuation and wording [PATCH 3/3] ASoC: sof: Kconfig: fix Kconfig punctuation and wording

  sound/soc/sof/Kconfig       |   42 +++++++++++------------ sound/soc/sof/imx/Kconfig   |   10 ++--- sound/soc/sof/intel/Kconfig |   62 +++++++++++++++++-----------------

  3 files changed, 57 insertions(+), 57 deletions(-)

thanks.

Signature · 1 line
~Randy